Hello, I am new here.
Actually, some months ago, I was trying to root my realme 2 pro device and ended up messing my recovery partition and stuck on a bootloop. As it was covered in warranty, I sent my phone to repair (not official). They fixed my phone for free and said that they changed the motherboard (dont know why they did that), and can confirm because serial number is changed, and it has been working fine since then. But when I got news that RealmeUI was being rolled out to Realme 2 Pro, I noticed that I couldn't update because on the update screen, it is showing, already on the latest version RMX1801EX_11_A.11. So, I tried to manually download the firmware and tried to flash but got error that the update is not supported (I'm sure I downloaded the correct one from realme website). Also, I cannot unlock my bootloader as the In-depth test app is showing "The current app does not support your system, please update your system version". Kindly guide me what should I do, have the repair guys messed up something? Any help would be appreciated.
Related
First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.
I got a c432B160 ss and I still only have a bad update and ive tried firmware finder, it does not work for me and neither does TWRP flashing how can Huawei screw up this bad with an update not not fix it when users simply cannot update without getting totally screwed by them.
I sent a message to me regarding with the update issues (about ,5-6 weeks ago).
They said that if you obtain the bootloader unlock code, your phone can be detected and no longer receive updates.
My friend who took his bootloader code is stuck on marshmallow since a year, even checking the updater app and nothing.
He has VNS-L21, just like mine. I guess i was lucky when my motherboard was changed twice and had a new IMEI.
So just try to sabotage your phone by installing a corrupted firmware and lock your bootloader. Then go to the warranty and tell them that you received an update and you left it overnight with the charger plugged in. Profit.
Why would they believe? Some huawei devices have a change (3.5%) to have their software corrupted when updating their firmware (from MM to N)
Hi all,
I'm on WAS-LX1AC432B184 and i can't update via OTA because "no update" and I think there's update as a friend of mine has the same phone but different build numbers as i needed to unlock my dual sim capability.
When i bought my phone i could only use 1 sim then i changed it to a dual sim. Can this be the reason why i can't get updates? The guy that did the dual sim conversion told me that i will be able to get updates as normal but i don't at all.
Please help me get the latest update so that i can enjoy the new Android – 8.0 Oreo
Hey there, by looking at your build number, you've got a 3GB RAM variant (LX1 instead of LX1A) Dual SIM (even build number) P10 lite on the global cust (C432).
The strange thing is the build number, stuck at 184 when Nougat arrived at B209/210 (Oreo is at B360/361).
Maybe you did some kind of modification (root, bad EMUI flash in the past) to the system so you can't receive official Huawei updates via OTA?
Have you tried clicking on the top right in System Update > Download latest full package?
Just some guesses here…
Probably, the you're huawei p10 lite dual is a branded? Usualy these models is the very slow for porting major release.
zYoshi said:
Hey there, by looking at your build number, you've got a 3GB RAM variant (LX1 instead of LX1A) Dual SIM (even build number) P10 lite on the global cust (C432).
The strange thing is the build number, stuck at 184 when Nougat arrived at B209/210 (Oreo is at B360/361).
Maybe you did some kind of modification (root, bad EMUI flash in the past) to the system so you can't receive official Huawei updates via OTA?
Have you tried clicking on the top right in System Update > Download latest full package?
Just some guesses here…
Click to expand...
Click to collapse
Hi zYoshi,
the download latest full package is greyed out... i have done a dual sim conversion in the past not sure if it was done correctly but i got it done... is there anyway i can fix this?
I want to get new updates for my phone to be honest.
sham_1 said:
Hi zYoshi,
the download latest full package is greyed out... i have done a dual sim conversion in the past not sure if it was done correctly but i got it done... is there anyway i can fix this?
I want to get new updates for my phone to be honest.
Click to expand...
Click to collapse
Hi sham_1
I sent you a guide wrote quickly in DM (for anyone who might need it, I left it here).
One quick question, now you have an even build number, right? That means that you are on a Dual-SIM firmware.
I suggest you to follow these steps and maybe wait some weeks because I did something similar too while Oreo was hitting Huawei's servers, but I received it only a month later, when the IMEI finally matched my firmware (the IMEI has to be approved in order to receive updates, suggest to "check firmware availability" on Firmware Finder).
"Hey,
I'm not so experienced in Huawei modding, but I managed to debrand my device from C55 to C432, so maybe it's worth a shot.
•
Anyways, try this:
- Download Firmware Finder from Play Store
- open it and click on WAS-LX1C432
- search for builds like B210 (must be an even number and not an Oreo B361, otherwise you can brick your device) choose a FullOTA
- click on update via proxy/DNS, follow the steps on screen
•
The important thing here is to know if the phone grants you into updating with that build, then failing in erecovery (detecting an error, no brick) so that you can reboot with not updated firmware and do a standard System Update from the settings, that update will contain the same build that you've got installed, but it will be used to basically overwrite everything without losing any data, even thought I suggest you to do a backup.
•
Before doing any of the steps I gave you, could you please describe me what you did, what method did you follow?
•
In this post, I am giving steps that worked for me when I had a corrupted firmware, but your problem may be different from this.
Check also the HWOTA method (to solve the same problem but with the warranty void, I suggest to use it only if the above method doesn't work), search "HWOTA P10 lite" on Google for more info.
•
Hope this helps
-zYoshi"
Yah, I'm serious! I'll tell you in detail.
Weeks ago, when I tried to flash stock rom, I made a big mistake that made my deivice hard bricked and then I found the reason in this thread: https://in.c.mi.com/thread-1095941-1-0.html.
I immediately brought my device to Mi Support Center, they made it alive but other problems came and I posted this thread: https://forum.xda-developers.com/mi-a1/help/help-soft-brick-t3860620 (thanks for people who tried to help me)
I found that my device lost persist partition, so that I flashed it, done, however, I relized that my device lost IMEI and BASEBAND, too.
I tried to restored my IMEI by QCN file but I only got sim 1 IMEI, I flashed BASEBAND and my deivice stuck in bootloop.
After a long time, I asked for someone to help but they couldn't do anything and then I found some problems.
1. IMEI dosen't show anything now and BASEBAND is unknown.
2. I can't flash Android 8.1 or higher versions on my device, it only accepts 8.0 and lower versions. If I flash 8.1, it continuously reboot when Android One logo shows up. But nothing happens when I flash 8.0.
Three days ago, I brought my device to Mi Support Center again, they said my mainboard is broken, it need replacing but I denied because the cost is too expensive, about $145. I took it back, tried to flash 8.0 version and installed update, sadly, my device is locked now and I can't flash anything. I think I can flash 8.0 via testpoint method, but the important thing is that I don't know what's exactly happenning with my device.
Why I can't flash 8.1 version and can I take my IMEI back?
I'm tired to find the answers days and I'm thinking to sell my death device with a cheap price about $40 for screen and camera only.
Someone help me, please!
By the way, I'm in Vietnam.
manhnl311 said:
Yah, I'm serious! I'll tell you in detail.
Weeks ago, when I tried to flash stock rom, I made a big mistake that made my deivice hard bricked and then I found the reason in this thread: https://in.c.mi.com/thread-1095941-1-0.html.
I immediately brought my device to Mi Support Center, they made it alive but other problems came and I posted this thread: https://forum.xda-developers.com/mi-a1/help/help-soft-brick-t3860620 (thanks for people who tried to help me)
I found that my device lost persist partition, so that I flashed it, done, however, I relized that my device lost IMEI and BASEBAND, too.
I tried to restored my IMEI by QCN file but I only got sim 1 IMEI, I flashed BASEBAND and my deivice stuck in bootloop.
After a long time, I asked for someone to help but they couldn't do anything and then I found some problems.
1. IMEI dosen't show anything now and BASEBAND is unknown.
2. I can't flash Android 8.1 or higher versions on my device, it only accepts 8.0 and lower versions. If I flash 8.1, it continuously reboot when Android One logo shows up. But nothing happens when I flash 8.0.
Three days ago, I brought my device to Mi Support Center again, they said my mainboard is broken, it need replacing but I denied because the cost is too expensive, about $145. I took it back, tried to flash 8.0 version and installed update, sadly, my device is locked now and I can't flash anything. I think I can flash 8.0 via testpoint method, but the important thing is that I don't know what's exactly happenning with my device.
Why I can't flash 8.1 version and can I take my IMEI back?
I'm tired to find the answers days and I'm thinking to sell my death device with a cheap price about $40 for screen and camera only.
Someone help me, please!
Anyway, I'm in Vietnam.
Click to expand...
Click to collapse
Do a data format, then install anything.
justboryata said:
Do a data format, then install anything.
Click to expand...
Click to collapse
How to flash something when bootloader is locked? Anyway, that's not point, I can flash via testpoint method, the point is why I can't use 8.1 and can I take my IMEI back, thanks!
manhnl311 said:
Yah, I'm serious! I'll tell you in detail.
Weeks ago, when I tried to flash stock rom, I made a big mistake that made my deivice hard bricked and then I found the reason in this thread: https://in.c.mi.com/thread-1095941-1-0.html.
I immediately brought my device to Mi Support Center, they made it alive but other problems came and I posted this thread: https://forum.xda-developers.com/mi-a1/help/help-soft-brick-t3860620 (thanks for people who tried to help me)
I found that my device lost persist partition, so that I flashed it, done, however, I relized that my device lost IMEI and BASEBAND, too.
I tried to restored my IMEI by QCN file but I only got sim 1 IMEI, I flashed BASEBAND and my deivice stuck in bootloop.
After a long time, I asked for someone to help but they couldn't do anything and then I found some problems.
1. IMEI dosen't show anything now and BASEBAND is unknown.
2. I can't flash Android 8.1 or higher versions on my device, it only accepts 8.0 and lower versions. If I flash 8.1, it continuously reboot when Android One logo shows up. But nothing happens when I flash 8.0.
Three days ago, I brought my device to Mi Support Center again, they said my mainboard is broken, it need replacing but I denied because the cost is too expensive, about $145. I took it back, tried to flash 8.0 version and installed update, sadly, my device is locked now and I can't flash anything. I think I can flash 8.0 via testpoint method, but the important thing is that I don't know what's exactly happenning with my device.
Why I can't flash 8.1 version and can I take my IMEI back?
I'm tired to find the answers days and I'm thinking to sell my death device with a cheap price about $40 for screen and camera only.
Someone help me, please!
By the way, I'm in Vietnam.
Click to expand...
Click to collapse
These files were dangerous dude and they brick parts of your motherboard like imei and baseband. So if you need a fix replace it
billis2020 said:
These files were dangerous dude and they brick parts of your motherboard like imei and baseband. So if you need a fix replace it
Click to expand...
Click to collapse
I can buy a new one with the cost to replace to the whole mainboard. In fact, I accept the thing that I can't use SIM anymore, I just don't know why I can't upgrade to 8.1 or higher
So a few months ago i tried unlocking and rooting my old zenfone 3, it failed horribly and now I'm left with a bricked device. Because its been a while I don't fully remember all the details, but I think I might have corrupted some part of the system and then did a full wipe/format which left me with nothing, at this point i might have found a system image with the very first firmware version and when i tried installing the latest firmware update from the Asus website, I realized that I would need to start flashing from the very first update to the final update. I tried looking for custom firmwares and they also needed an up to date original firmware.
And now i need to use the phone again but still can't figure it out, the phone is now just stuck on a bootloop. I don't really know what to do anymore. One thing I keep thinking is if there is a full system image of the up to date stock firmware, an image file that i could just flash onto the phone and have it running again. Though I haven't seen anything like that, so I don't think that exists or will work with this phone
Can someone please help me? this phone has been a brick for months and now I need some help recovering it
TL;DR Wiped the entire phone, lost the android system, and now I don't think I can use the phone unless I manually update the phone from the very first update to the last. I'm looking for if a full stock system image/backup with the latest (or atleast new-ish) version exists, though I'm very doubtful that this exists at this point