hello to my friend at xda,i need your help my mi 9t pro get in hard brick it on edl mode 9008 no fastboot and no respone when i press on the power button or volume i search all over the internet and dont find anwser
i tried to flash a stock rom via mi flash but fro some resaon the mi flash tool dont recgnoize my com port of 9008 mode and i have a program and mrt dongle that i paid with edl cable and still the program said to re enter edl and time out and i try this but still don't work if some body here on the forum know to fix it or can help me i really will thank him
here some VIDEO to explain better
----------------------------------------------------------------------------
MI 9T EDL MODE 9008 MI FLASH TOOL NOT WORKING VIDEO
Check out this video:
HTML:
[CODE]https://share.vidyard.com/watch/t2w6yGiMF6n49jeTuEvMmP?[/CODE]
P.S i am sorry about the bad english and thanks again!!!:laugh:
TRY THIS
Check this out change language to english,sorry i am from greece:hhttps://xiaomi-miui.gr/community/index.php/Thread/41710-Xiaomi-MI-9T-K20-HARD-BRICK-RECOVER/[/url]...delete the first h
stelioskromidakis said:
Check this out change language to english,sorry i am from greece:hhttps://xiaomi-miui.gr/community/index.php/Thread/41710-Xiaomi-MI-9T-K20-HARD-BRICK-RECOVER/[/url]...delete the first h
Click to expand...
Click to collapse
thanks my friend:good:, but this not help because the program didn't recgonzie my phone in 9008 edl mode even if the device manger of windows show that my phone in this mode and i can't go to fastboot and buttons not working it really super hard brick i try anything and for now no luck for me:crying:
Did you try pin method to get to edl mode?
---------- Post added at 05:35 AM ---------- Previous post was at 05:25 AM ----------
Or test point
stelioskromidakis said:
Did you try pin method to get to edl mode?
---------- Post added at 05:35 AM ---------- Previous post was at 05:25 AM ----------
Or test point
Click to expand...
Click to collapse
my friend
the phone is already in edl mode when i connect it to the pc it show 9008 qualcomm mode if try without connect to the pc and press the power button Nothing happens and the phone does not respond
so even to fastboot i can't enter it like the phone is not dead because the computer show it in 9008 but the all the program i try like mi flash tool dont even see the phone in edl mode but the device manager of windows show it in 9008 qualcomm mode
I say that because the phone auto edl mode dont work sometimes the com port stays closed try to manualy boot in edl mode with the pins
stelioskromidakis said:
I say that because the phone auto edl mode dont work sometimes the com port stays closed try to manualy boot in edl mode with the pins
Click to expand...
Click to collapse
i try this but still the same the mi flash dont regonize the com port but the device manager show 9008 qualcomm mode:crying:
anyone else maybe can help me with this problem?
Deep flash cable, you can either make it yourself (diy), or buy one. As for the process, it's quite simple. Try search on Youtube. It worked for me when i had this problem long ago.
kaiyuno said:
Deep flash cable, you can either make it yourself (diy), or buy one. As for the process, it's quite simple. Try search on Youtube. It worked for me when i had this problem long ago.
Click to expand...
Click to collapse
i have 2 edl cable and still the same problem it don't regonize the com port in mi flash or it failed on other programs to flash the rom and another thing i was mistake my phone is mi 9t and not mi 9t pro as i think from the begining
have some body find a way to flash xiamoi stock rom for mi 9t via edl with out auth ?,i allready buy a ufi and mrt dongle program and still nothing work
MottiAshko said:
have some body find a way to flash xiamoi stock rom for mi 9t via edl with out auth ?,i allready buy a ufi and mrt dongle program and still nothing work
Click to expand...
Click to collapse
Need pay to any with autorizated account and make the flash vía TeamViewer (in remote), try S-unlock.
dannyzamora said:
need pay to any with autorizated account and make the flash vía teamviewer (in remote), try s-unlock.
Click to expand...
Click to collapse
s-unlock i ask the support they say that xiaomi auth tool is dead i want to understand how people get from xiamoi the auth edl accout ,they buy it from xiaomi or hack the edl?
MottiAshko said:
s-unlock i ask the support they say that xiaomi auth tool is dead i want to understand how people get from xiamoi the auth edl accout ,they buy it from xiaomi or hack the edl?
Click to expand...
Click to collapse
I dont know how they take that auth accounts but today its the only method that i find for this, S-unlock or any russian guys sell the service vía teamviewer.
dannyzamora said:
I dont know how they take that auth accounts but today its the only method that i find for this, S-unlock or any russian guys sell the service vía teamviewer.
Click to expand...
Click to collapse
ok thank you very much!:good:
Related
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Maybe
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
Better idea is search Ali express for "deep flash cable xiaomi"
jazz452 said:
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
Better idea is search Ali express for "deep flash cable xiaomi"
Click to expand...
Click to collapse
wow thats very interesting, ill try to buy one.
been reading on it for a bit. think this can really work?
or you can purchase something called a jig i hope i spelled it properly from ebay or amazon it shorts the usb testpoints and puts your phone into edl or fastboot mode
xdarkmario said:
wow thats very interesting, ill try to buy one.
been reading on it for a bit. think this can really work?
Click to expand...
Click to collapse
If the test points work the cable should, maybe the other cable will work, seems strange that they say to use to deep flash cable though, sure these people know about the jig cable so wouldn't chance it.
https://www.youtube.com/watch?v=DJZ6Ka7mrIA
You can buy cable in UK
http://www.fonefunshop.co.uk/cable_picker/99673_Xiaomi_Deep_Flash_Cable.html
Even get a how to on the page.
You can also try this unbrick guide on MIUI forum.
http://en.miui.com/thread-327861-1-1.html
He can't get to recovery.
xdarkmario said:
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Click to expand...
Click to collapse
try this
Boot into fastboot mode and connect your phone to pc
open command window and type fastboot oem edl
It worked for me
Kanth's said:
try this
Boot into fastboot mode and connect your phone to pc
open command window and type fastboot oem edl
It worked for me
Click to expand...
Click to collapse
again, still cant do that. I cant do anything. I brought the cable a couple of days ago so when it gets here ill try it, if not then ill send it to warranty repair
xdarkmario said:
again, still cant do that. I cant do anything. I brought the cable a couple of days ago so when it gets here ill try it, if not then ill send it to warranty repair
Click to expand...
Click to collapse
Is it hardbricked?
Kanth's said:
Is it hardbricked?
Click to expand...
Click to collapse
yes i assume hitting power immediately puts it into Qualcomm HS-USB Diagnostics 900E mode, no screens no lights
xdarkmario said:
yes i assume hitting power immediately puts it into Qualcomm HS-USB Diagnostics 900E mode, no screens no lights
Click to expand...
Click to collapse
Take a look at this one - http://xiaomitips.com/guide/how-to-fix-bricked-redmi-3s-on-miui-7-8/
Kanth's said:
Take a look at this one - http://xiaomitips.com/guide/how-to-fix-bricked-redmi-3s-on-miui-7-8/
Click to expand...
Click to collapse
of course i have tried this before.
Please bear in mind that the method of reflashing Android ROM can only works fixing soft-bricked devices and NOT for hard-bricked ones.
Click to expand...
Click to collapse
I softbricked my redmi 3s as well, because I disabled some google apps.
Needless to say, you have to:
1. manually update/install qualcomm driver (when your phone in download mode).
2. download a fastboot rom
3. download miphone miflash tool, enable "flash all" option when you flash the fastboot rom.
there's a thread here on xda as well. search for bricked redmi 3 workaround.
do you want to enter download mode?
pressing vol up + vol down at once (Off position), and put in the USB cable
If the phone is on turn off 1st and imediatelly put in USB cable while, press vol up+ vol down
can you enter to fastboot?
I have same problem on my Redmi 3 Pro. No fastboot, No booting, No blink red light, No Charging, but if my device plug on pc it detected QC bla.. bla.. on port device manager. I don't know what to do anymore. *hopeless* *tearr* :crying:
the only way for hard brick is test points or deep flash cable, end of, I would go with cable less chance of breaking something while taking phone apart. If the phone is detected then it's only semi hard brick and can be fixed with Mi flash tool.
http://en.miui.com/thread-235865-1-1.html
http://en.miui.com/thread-254606-1-1.html
might be better.
but remeber to download the rom for your device.
xdarkmario said:
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Click to expand...
Click to collapse
What did you do to brick it? Please tell us so that new users don't face the same problem as you
Ptmaroct said:
What did you do to brick it? Please tell us so that new users don't face the same problem as you
Click to expand...
Click to collapse
That's a good valid point
I tried to flash mi 5x rom on A1 and it is in hard brick ... what to do now?
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Lol Lakshay already told ya on the group.It wouldn't have worked.
i cant boot to fastboot even
sooti said:
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Click to expand...
Click to collapse
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
gulatilakshay said:
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
Click to expand...
Click to collapse
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
gulatilakshay said:
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
Click to expand...
Click to collapse
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Rawwr said:
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Click to expand...
Click to collapse
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
gulatilakshay said:
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
Click to expand...
Click to collapse
dont even tell them that you're trying to connect to PC or anything about EDL mode
Rawwr said:
dont even tell them that you're trying to connect to PC or anything about EDL mode
Click to expand...
Click to collapse
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
gulatilakshay said:
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
Click to expand...
Click to collapse
good luck bro
I think Mi A1 not that difficult to get hard brick. Can you still get into fastboot? That day I try to re-lock bootloader with root lol. Also got bricked, appear as Qcom_USB_hulk something like that, but luckily still manage to get into fastboot.
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Rawwr said:
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Click to expand...
Click to collapse
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime? and 3T
gulatilakshay said:
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime and 3T
Click to expand...
Click to collapse
that's great and yes that's the best option as of now
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
What they have done?
jack_21 said:
What they have done?
Click to expand...
Click to collapse
yes even i want to know what did they do?
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
bpodnar said:
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
Click to expand...
Click to collapse
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
mokahabashy said:
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
Click to expand...
Click to collapse
Did you use usb 2.0 or 3.0? 3.0 is not good for this
bpodnar said:
Did you use usb 2.0 or 3.0? 3.0 is not good for this
Click to expand...
Click to collapse
i used usb 2
man my phone is fully dead boot
can not enter EDL mod or qualcom download mod
i tried make deep flash cable , it did not work
when i connect any usb to my mobile , even the charger i got my device vibrated every 2 second
i have to force it to EDL mod without using any cable
i have a question : i rooted the phone , so when i send it to warranty center would they know that i rooted my phone ?
what should i tell them ?
I think the service cannot detect that your phone is rooted because they cant turn it on. If they flash it from scratch the root will be gone.
Bro your phone opening case and Google search testpoint
---------- Post added at 01:34 AM ---------- Previous post was at 01:33 AM ----------
---------- Post added at 01:35 AM ---------- Previous post was at 01:34 AM ----------
My devices is not flashing and not edl cable test point is working only miphone 64 download and flashing 7.8.23 rom and devices is back bro
mokahabashy said:
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
Click to expand...
Click to collapse
Same happened with me....
Shubham2509 said:
Same happened with me....
Click to expand...
Click to collapse
Same did you get any solution?
Haseeb Ahmed Khan said:
Same did you get any solution?
Click to expand...
Click to collapse
I gave my phone to service center
Shubham2509 said:
I gave my phone to service center
Click to expand...
Click to collapse
did they fix it? or gave you a new one?
Haseeb Ahmed Khan said:
did they fix it? or gave you a new one?
Click to expand...
Click to collapse
Fix
Shubham2509 said:
Fix
Click to expand...
Click to collapse
There is another way directly on Miforum app. Basically you need to open back housing and short 2 cantacs. More you can read at Miforum when you search for Unbrick MI A1
Nice story, important lesson, note to self:
"Google more" (so you don't have to pay the service center so they do it for you and charge you a lot of moneyz)
I have Nokia X6 (TA-1099) from China but when I downgraded the OS it's gotten hard brick. Someone can help me to put it into EDL mode to I can recover it.
ManhDev said:
I have Nokia X6 (TA-1099) from China but when I downgraded the OS it's gotten hard brick. Someone can help me to put it into EDL mode to I can recover it.
Click to expand...
Click to collapse
hello, did you try an EDL-cable before opening the device?
seems it worked with the Nokia 5 and 6 http://forum.gsmhosting.com/vbb/f296/nokia-5-nokia-6-connect-edl-cable-little-ones-2246357/
meltbanana said:
hello, did you try an EDL-cable before opening the device?
seems it worked with the Nokia 5 and 6
Click to expand...
Click to collapse
Yes. I did but the phone can't boot into 9008. There didn't anything happened
ManhDev said:
Yes. I did but the phone can't boot into 9008. There didn't anything happened
Click to expand...
Click to collapse
I am in the same situation, I flashed manually different partition and got it wrong.
It booted with black screen all the way but QHSusb was working, EDL, emergency.
I soft-repaired, and then thougt it was unbrickable, but I was wrong.
I flash for fun modem.bin and it booted up. But later I flash a big-rom-update-zip in TWRP and then changed the boot-slut from B to A and restarted from recoverymode but DEAD, complete dead, nothing appears on the screen or devicemangar.
then it didn't boot at all.
I have a home-made cable and tried different button-combinations and cable-connected-combination during boot but nothing work.
Either I have destroyed QHSUSB-modem, ( I don't know if it is software related on UFS-storage or if the Qualcom-emergency-MODEM have a different chip that boots up.
Maybe I have incompatible critical-partitions from different rom?!
The last resort is to brake/carefully open the screen-glas on short the electricity from some chips and force the QHS-usb-mode, emergency mode. I have the Firehose.elf file that will help, and the partitions and patch0 file. But need to force boot inte Qualcomm-EDL , But how?
My chip-family-SOC is MSM9889 ta-1012, NB1-softwares-firmwares
I need the Firehose.elf file that will help, and the partitions and patch0 file，can you seed it to me？
short ur motherboard to enter EDL mode... i can provide EDL point if u want... after short the board HS... 9008 drive will show..update the drive to Qloader 9008.. than u can flash ur device with OST tool emergency mode.. choose firmware before july 2018.
Sent from my TA-1054 using Tapatalk
---------- Post added at 05:40 PM ---------- Previous post was at 05:39 PM ----------
ur homemade cable wont work
Sent from my TA-1054 using Tapatalk
View attachment 5013803
I wrongly by mistake flashed Mi A1 rom
And then hit on system reboot in twrp recovery
Now My phone is neither rebooting not turning on nor in fastboot mode nor in twrp mode
If it is a hard brick please help me booting it :crying::crying::crying:
For real? Accidentally flashed ROM from different phone?
Probably just service with box to get it back to normal state
You mean I should go to service center?
Any fix here?!
ayazuddinkhan said:
You mean I should go to service center?
Any fix here?!
Click to expand...
Click to collapse
You need to open your phone and enable EDL mode, then you will need to pay a service (20/30 euros) to unbrick your phone via your PC (using TeamViewer remote control software).
Or try to use your warranty...
You messed up, what do you expect? Warranty, edl or local service with service box - every single one is paid
Try to get help on any 9t telegram groups
ayazuddinkhan said:
I wrongly by mistake flashed Mi A1 rom
And then hit on system reboot in twrp recovery
Now My phone is neither rebooting not turning on nor in fastboot mode nor in twrp mode
If it is a hard brick please help me booting it :crying::crying::crying:
Click to expand...
Click to collapse
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Fantomduck said:
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Click to expand...
Click to collapse
Yes Done thankyou
Fantomduck said:
Dear Friend I hope you have already managed to revive your phone, by now,
If not read my posthttps://forum.xda-developers.com/showpost.php?p=81536593
Click to expand...
Click to collapse
Dear friend, i have tried to use your method but despite the fact i can see my xiaomi in device manager as Qualcomm HS-USB QDLoader 9008, all in one tools cannot find it. Is there any solution for this?
ps: My screen is not turning on.
Thank you in advance
did u revive ur phone again .. or what ?
xD9 said:
Dear friend, i have tried to use your method but despite the fact i can see my xiaomi in device manager as Qualcomm HS-USB QDLoader 9008, all in one tools cannot find it. Is there any solution for this?
ps: My screen is not turning on.
Thank you in advance
Click to expand...
Click to collapse
do u fixed it .. if yes how