Related
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Maybe
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
Better idea is search Ali express for "deep flash cable xiaomi"
jazz452 said:
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
Better idea is search Ali express for "deep flash cable xiaomi"
Click to expand...
Click to collapse
wow thats very interesting, ill try to buy one.
been reading on it for a bit. think this can really work?
or you can purchase something called a jig i hope i spelled it properly from ebay or amazon it shorts the usb testpoints and puts your phone into edl or fastboot mode
xdarkmario said:
wow thats very interesting, ill try to buy one.
been reading on it for a bit. think this can really work?
Click to expand...
Click to collapse
If the test points work the cable should, maybe the other cable will work, seems strange that they say to use to deep flash cable though, sure these people know about the jig cable so wouldn't chance it.
https://www.youtube.com/watch?v=DJZ6Ka7mrIA
You can buy cable in UK
http://www.fonefunshop.co.uk/cable_picker/99673_Xiaomi_Deep_Flash_Cable.html
Even get a how to on the page.
You can also try this unbrick guide on MIUI forum.
http://en.miui.com/thread-327861-1-1.html
He can't get to recovery.
xdarkmario said:
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Click to expand...
Click to collapse
try this
Boot into fastboot mode and connect your phone to pc
open command window and type fastboot oem edl
It worked for me
Kanth's said:
try this
Boot into fastboot mode and connect your phone to pc
open command window and type fastboot oem edl
It worked for me
Click to expand...
Click to collapse
again, still cant do that. I cant do anything. I brought the cable a couple of days ago so when it gets here ill try it, if not then ill send it to warranty repair
xdarkmario said:
again, still cant do that. I cant do anything. I brought the cable a couple of days ago so when it gets here ill try it, if not then ill send it to warranty repair
Click to expand...
Click to collapse
Is it hardbricked?
Kanth's said:
Is it hardbricked?
Click to expand...
Click to collapse
yes i assume hitting power immediately puts it into Qualcomm HS-USB Diagnostics 900E mode, no screens no lights
xdarkmario said:
yes i assume hitting power immediately puts it into Qualcomm HS-USB Diagnostics 900E mode, no screens no lights
Click to expand...
Click to collapse
Take a look at this one - http://xiaomitips.com/guide/how-to-fix-bricked-redmi-3s-on-miui-7-8/
Kanth's said:
Take a look at this one - http://xiaomitips.com/guide/how-to-fix-bricked-redmi-3s-on-miui-7-8/
Click to expand...
Click to collapse
of course i have tried this before.
Please bear in mind that the method of reflashing Android ROM can only works fixing soft-bricked devices and NOT for hard-bricked ones.
Click to expand...
Click to collapse
I softbricked my redmi 3s as well, because I disabled some google apps.
Needless to say, you have to:
1. manually update/install qualcomm driver (when your phone in download mode).
2. download a fastboot rom
3. download miphone miflash tool, enable "flash all" option when you flash the fastboot rom.
there's a thread here on xda as well. search for bricked redmi 3 workaround.
do you want to enter download mode?
pressing vol up + vol down at once (Off position), and put in the USB cable
If the phone is on turn off 1st and imediatelly put in USB cable while, press vol up+ vol down
can you enter to fastboot?
I have same problem on my Redmi 3 Pro. No fastboot, No booting, No blink red light, No Charging, but if my device plug on pc it detected QC bla.. bla.. on port device manager. I don't know what to do anymore. *hopeless* *tearr* :crying:
the only way for hard brick is test points or deep flash cable, end of, I would go with cable less chance of breaking something while taking phone apart. If the phone is detected then it's only semi hard brick and can be fixed with Mi flash tool.
http://en.miui.com/thread-235865-1-1.html
http://en.miui.com/thread-254606-1-1.html
might be better.
but remeber to download the rom for your device.
xdarkmario said:
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Click to expand...
Click to collapse
What did you do to brick it? Please tell us so that new users don't face the same problem as you
Ptmaroct said:
What did you do to brick it? Please tell us so that new users don't face the same problem as you
Click to expand...
Click to collapse
That's a good valid point
If this is the case does anyone have a nice stock rom available?
l0m1s said:
If this is the case does anyone have a nice stock rom available?
Click to expand...
Click to collapse
yes,it is same phone,maimang5 is Chinese vision,nova plus is for other country .(my English is not good,if you have other question ,I can answer for you)from a chinese boy
KawaiiSakura said:
yes,it is same phone,maimang5 is Chinese vision,nova plus is for other country .(my English is not good,if you have other question ,I can answer for you)from a chinese boy
Click to expand...
Click to collapse
i bricked my phone maimang 5 , erased boot loader then locked the phone, now in boot mode , no edl mode, no fastboot mode, do u have test point to enter EDL mode ?
what do you mean by edl mode ??
wise.man said:
i bricked my phone maimang 5 , erased boot loader then locked the phone, now in boot mode , no edl mode, no fastboot mode, do u have test point to enter EDL mode ?
Click to expand...
Click to collapse
Maybe You could try using a Deep Flash Cable to enter EDL?
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
wise.man said:
i bricked my phone maimang 5 , erased boot loader then locked the phone, now in boot mode , no edl mode, no fastboot mode, do u have test point to enter EDL mode ?
Click to expand...
Click to collapse
Maybe You could try using Deep Flash Cable to enter EDL?
You can eventually try to disconnect battery, reconnect it and then try to boot into fastboot.
But DFC should help.
ProtoDeVNan0 said:
Maybe You could try using a Deep Flash Cable to enter EDL?
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
Maybe You could try using Deep Flash Cable to enter EDL?
You can eventually try to disconnect battery, reconnect it and then try to boot into fastboot.
But DFC should help.
Click to expand...
Click to collapse
I tried all, but no luck, need test point to put the phone into EDL mode!
Hello,
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu.
My phone's bootloader is damaged after flashing some .zip file.Now it's fully dead.
Not showing bootlogo,no recovery mode,no edl & no csc.It's just detecting as "QUALCOMM HS-USB QDLoader 9008 in PC.I downloaded QUALCOMM FLASH IMAGE LOADER(QFIL) but i can't find neccesary files for flashing(i.e., .mbn,rawprogram.xml,patch.xml suitable files for my phone's CPU).
Can anyone help me to unbrick my phone?
hi i,m facing this same problem i try my level best to flash stock os on it but it,s not turn on not charging no led lights indicates
a few weeks ago reverse charging popup is show again and again can,t see movie on the device to fix that i try to change the os
i just switch off the device from twrp after wipe dalvik ,catch and data the i try to turn it on but it,s not
if you find any way please inform me it,s very urgent ([email protected])
Christy2375 said:
hi i,m facing this same problem i try my level best to flash stock os on it but it,s not turn on not charging no led lights indicates
a few weeks ago reverse charging popup is show again and again can,t see movie on the device to fix that i try to change the os
i just switch off the device from twrp after wipe dalvik ,catch and data the i try to turn it on but it,s not
if you find any way please inform me it,s very urgent ([email protected])
Click to expand...
Click to collapse
You can't flash Stock ROM with TWRP, you should try flashing other ROM.
shirofficial said:
You can't flash Stock ROM with TWRP, you should try flashing other ROM.
Click to expand...
Click to collapse
hi my phone is total dead not charging not turning on no led indication i try my level best if u have a solution please inform me
because i don,t have a phone and don,t have enough money to buy a new phone
Idem... No solution?
Fix for dead ASUS Zenfone Max
Try holding down the power button and continuously press volume up (+) button. Hopefully this will take you to Downloader Mode.
---------- Post added at 04:45 PM ---------- Previous post was at 04:44 PM ----------
rkish0258 said:
Hello,
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu.
My phone's bootloader is damaged after flashing some .zip file.Now it's fully dead.
Not showing bootlogo,no recovery mode,no edl & no csc.It's just detecting as "QUALCOMM HS-USB QDLoader 9008 in PC.I downloaded QUALCOMM FLASH IMAGE LOADER(QFIL) but i can't find neccesary files for flashing(i.e., .mbn,rawprogram.xml,patch.xml suitable files for my phone's CPU).
Can anyone help me to unbrick my phone?
Click to expand...
Click to collapse
Hold down the Power button and continuously press volume up(+) button, this will take you to download mode
rkish0258 said:
Hello,
My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu.
My phone's bootloader is damaged after flashing some .zip file.Now it's fully dead.
Not showing bootlogo,no recovery mode,no edl & no csc.It's just detecting as "QUALCOMM HS-USB QDLoader 9008 in PC.I downloaded QUALCOMM FLASH IMAGE LOADER(QFIL) but i can't find neccesary files for flashing(i.e., .mbn,rawprogram .xml,patch .xml suitable files for my phone's CPU).
Can anyone help me to unbrick my phone?
Click to expand...
Click to collapse
bro i too got in to this trouble after flashing stock in recovery ,a total dead , but its says that the qualcomm bulk loader port is for last chance of saving the phone ,and this is the qfil rom here {{{{{{ht tps://www .firmw are27 .net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware .h tml}}}}}}}
but idk i cant reach in to those files ,bro u gotta check this out
check if its worked for u
https://drive.google.com/file/d/0B0ul1vuE3yJwUjVpSDJMbUJZanc/view
flash with qfil in 9008 mode
its for 8939
https://drive.google.com/file/d/0B0ul1vuE3yJwbTNScXhDYkx6cW8/view
for 8916
thanks bro ?? it worked bro , at last dead to alive
kichukic said:
thanks bro it worked bro , at last dead to alive
Click to expand...
Click to collapse
I am in same situation bro
While following these steps....
In QFIL, after clicking download
An error occurred,
Download failed: Switch To Emergency Download mode failed...
Google it and found to remove battery before connecting usb for lenovo phone.
Please help me... How you make it worked for non removable battery zenfone max:crying:
Yeah , many of em posting about it not recovering but some how mine has recovered with out any errors there , bro what about your cpu ??
krishnasmidhun said:
I am in same situation bro
While following these steps....
In QFIL, after clicking download
An error occurred,
Download failed: Switch To Emergency Download mode failed...
Google it and found to remove battery before connecting usb for lenovo phone.
Please help me... How you make it worked for non removable battery zenfone max:crying:
Click to expand...
Click to collapse
provide detail of ur phn ..
Sent from my Redmi Note 5 Pro using Tapatalk
kichukic said:
Yeah , many of em posting about it not recovering but some how mine has recovered with out any errors there , bro what about your cpu ??
Click to expand...
Click to collapse
Its asus zenfone max msm 8916. I have a feeling that is there any differnce in using windows 7 and windows 10??
What you guys are using while flashing with qfil? 64bit 86 bit are playing something??
---------- Post added at 09:50 AM ---------- Previous post was at 09:44 AM ----------
krishnasmidhun said:
Its asus zenfone max msm 8916. I have a feeling that is there any differnce in using windows 7 and windows 10??
What you guys are using while flashing with qfil? 64bit 86 bit are playing something??
Click to expand...
Click to collapse
Sometimes the error is firehose failed then on nxt couple of tries it is SDL fail
!!!
Well some times administration matters , on my first try i got a firehose error
Then i granted administration and everything goes well , if u got any error google those errors, thats what i did cause finding fixes for asus max is tough in xda especially which is in this condition
Hello,
I have similar problem with my ZC550KL. I downloded the 8916 firmware, but when I try to download usin qfil I got sahara fail message. Please share some brief instruction how to solve this.
Tnank you!
For all those who recovered there phone,does you last your IMEI number in the process??I lost mine,does your bootloader got locked
pranshaks said:
For all those who recovered there phone,does you last your IMEI number in the process??I lost mine,does your bootloader got locked
Click to expand...
Click to collapse
Do you have your efs?
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
I tried to flash mi 5x rom on A1 and it is in hard brick ... what to do now?
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Lol Lakshay already told ya on the group.It wouldn't have worked.
i cant boot to fastboot even
sooti said:
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
---------- Post added at 01:57 PM ---------- Previous post was at 01:38 PM ----------
What do you mean by "hard brick", can't you boot into fastboot?
try using power + volume down
Guys, don't flash roms from other devices, the mi 5x has a single partition mode not a/b like we have, you might have overwritten the bootloader...
if you get nothing on screen try hooking it up to the PC and see under device manager if you get qualcomm 9008 mode
Click to expand...
Click to collapse
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
gulatilakshay said:
..
...
i cant boot to fastboot mode
i m happy that the mi service center is just 3 min walk from my home and its in warranty!
pc isn"t detecting pls help @sooti can i do anything at home?
Click to expand...
Click to collapse
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
sooti said:
Do you see anything under 'ports' in device manager?
If not your device is prob done.. learn your lesson and only flash stock or other software tested by people here, never flash something for another device even if the hardware is similar
Click to expand...
Click to collapse
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
gulatilakshay said:
@sooti nothing is shown in ports.... but i m not using an edl cable to connect i guess i need edl cable for 9008
even my phone shows led light and vibration when connected!
so i m going to service center tomorrow
Click to expand...
Click to collapse
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Rawwr said:
dont let them know that you tried to flash MI 5X rom
just tell them that your phone died all of a sudden
if you tell them the truth you wont be getting anything but disappointment
Click to expand...
Click to collapse
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
gulatilakshay said:
thats what i m planning to do
and pls tell me whats edl mode
my pc is not detecting the phone but its vibrating as if trying to boot when i connect it to pc
Click to expand...
Click to collapse
dont even tell them that you're trying to connect to PC or anything about EDL mode
Rawwr said:
dont even tell them that you're trying to connect to PC or anything about EDL mode
Click to expand...
Click to collapse
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
gulatilakshay said:
got it ... i m gonna tell them it died all of a sudden.......
my friend says that he also hard bricked and he went to center and they flashed a new rom... thats all i m relieved... so i m just going to the service center now.... wish me luck .......i hope i will close the thread today @Rawwr @sooti
Click to expand...
Click to collapse
good luck bro
I think Mi A1 not that difficult to get hard brick. Can you still get into fastboot? That day I try to re-lock bootloader with root lol. Also got bricked, appear as Qcom_USB_hulk something like that, but luckily still manage to get into fastboot.
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Rawwr said:
that's great bro, but do not be afraid to root it again
because you learn from your mistakes
i once hardbricked my Mi3 and i brought it back to life by using sim connector's method
flashing custom roms since 2012 and trust me it is fun
you just need to follow the steps carefully
Click to expand...
Click to collapse
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime? and 3T
gulatilakshay said:
I will wait till the kernel resources and stable twrp are released
Flashed all the rooms in my redmi 2 prime and 3T
Click to expand...
Click to collapse
that's great and yes that's the best option as of now
gulatilakshay said:
@Rawwr and @sooti thanks guys for your support! My device is back and I won't even root it
Click to expand...
Click to collapse
What they have done?
jack_21 said:
What they have done?
Click to expand...
Click to collapse
yes even i want to know what did they do?
i shut down my device by tapping power off. then removed sim card and sd card after screen went black. but when i tried to power on, it doesnt respond.. i tried holding the power button for 10s, it gives me a black screen and vibrates and instantly closes again.. so i cant boot into recovery, i cant boot to fastboot, and its unreadable on pc, it doesnt charge, no bootlogo, nothing. just bricked..
.
i dont know why, but it just bricked by itself.. i've been using mokee 9 date of 1/1/2020 thats the last update i installed, with add on su and everything was working perfectly and even if i reboot multiple times..
bootloader was unlocked so xiaomi centers wont help me..
how is it possible to make it boot again? i mean like wtf even happened? i did nothing.. i didnt flash anything and system was READ ONLY before powering off.. all i did was remove sim and sd cards... even after flashing mokee updates yesterday, it booted normally and idk what's going on..
any help?
EDIT: the phone's hard disk IC was damaged. I went to a tech guy and he changed it but then the motherboard broke entirely after flashing the qcn file for imei. Device out of warranty of course because of the damn bootloader. Thank you xiaomi for the great phone that only lasted one month before dying completely.
attempt 2
in attempt 1 i tried force reboot as mentioned, didnt work
attempt 2 : i tried force reboot while plugged to pc, this showed up
attempt 3
i tried to flash a new firmware, but device unreadable. must be on fastboot mode for mi flasher to be able to read it. im starting to lose hope.. the device is new though it makes me sad
on some topic of a bricked phone online, someone mentioned that he should try EDL mode, by cmd command FASTBOOT OEM EDL
so i tried it many times until it said successful. but still didnt fix anything, because it didnt actually boot into EDL mode, had to open my device physically and use test points. so attempt 4 failed
does this mean fastboot works?
after attempt 4, it said successful so if fastboot works like that then i can flash stock boot.img or something.. right? which image should i start with
forum
boody shaban said:
on some topic of a bricked phone online, someone mentioned that he should try EDL mode, by cmd command FASTBOOT OEM EDL
so i tried it many times until it said successful. but still didnt fix anything. so attempt 4 failed
Click to expand...
Click to collapse
this is the forum of the bricked phone similar to mine, except that i didnt try any flash like him it just happened randomly
https://c.mi.com/thread-2334646-1-0.html
attempt 5
attempt 5 failed, i tried flashing whole firmware one by one, i started with vbmeta, then recovery but it failed. idk what to do
notice
i have noticed that it only flashes small img files, if its 100kb or more it will fail. maybe due to device restart because the only way to make it read in fastboot mode is to force restart multiple times until it flashes. what to do now?
attempt 6
so according to this video
https://www.youtube.com/watch?v=yJoIiLE_w3w
he installed a driver (name in attachment) then refreshed on mi flash so his device became readable on mi flasher
i tried that but it didnt work.
final attempt.. out of hope
found the possible solution. its called a deep flash cable, i will just go to any tech guy and ask him for help.
see attachment for info.
boody shaban said:
found the possible solution. its called a deep flash cable, i will just go to any tech guy and ask him for help.
see attachment for info.
Click to expand...
Click to collapse
In order to enter test point / EDL / 9008 mode, you have to physically open your device and connect two points on the phone's board. Search on YouTube for Redmi 7a EDL. If you get to EDL mode, you can flash original stock firmware via MiFlash.
Reason for brick
cg730620 said:
In order to enter test point / EDL / 9008 mode, you have to physically open your device and connect two points on the phone's board. Search on YouTube for Redmi 7a EDL. If you get to EDL mode, you can flash original stock firmware via MiFlash.
Click to expand...
Click to collapse
Yes, I hate tearing up my device so I took it to a professional. He failed to open ADL but he did the 9008. Now he waits some kind of credit. Not sure if for the app to work or for the bootloader to unlock, although it was already unlocked but maybe somehow got locked..
Any way, expected reason for brick is either latest magisk module, or kernel tweaks..
I gave the device to a professional, but he also failed to flash it even with test point. He said he was searching for a file.. I dont remember its name, something like IMOH..
Now I need to know any possible reason that might brick my phone again to avoid it
cg730620
Click to expand...
Click to collapse
cg730620 said:
.
Click to expand...
Click to collapse
The app he used was called ultimate multi tools
test point attempt failed
i did the test point, booted to 9008 mode but still nothing.
i think i know why the phone got bricked by itself, it got ARB stands for AUTOROLLBACK
read more about it here https://mi-globe.com/unbrick-your-xiaomi-phone-without-authorized-mi-account/
bootloader got automatically locked again.
Never lock the bootloader if:
- your phone was delivered Chinese version and you flashed Global firmware
- your phone was delivered Global version and you flashed Chinese firmware
- you changed system, vendor, boot or recovery partition
- you installed a custom or modified stock rom
ARB isn't an issue with this phone I suppose. Because I was on 11.0.5 and rolled back to 10.2.5 without problems.
Have you tried MiFlash Pro?
See here:
https://forum.xda-developers.com/redmi-7a/how-to/miflash-pro-t4030809
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
boody shaban said:
i did the test point, booted to 9008 mode but still nothing.
Click to expand...
Click to collapse
It seems that error is related to your computer. Reinstall drivers and MiFlash.
QDLoader Drivers:
http://www.mediafire.com/file/0jfq2r7adylnltu/QDLoader_HS-USB_Driver.zip/file
ADB driver:
http://www.mediafire.com/file/qskct06xyx1iivs/ADB%2Bdriver%2Bv1.17%2Blite.zip/file
MiFlash:
http://www.mediafire.com/file/bdjugf3zx7037yl/MiFlash2018-5-28-0.zip/file
Read about a similar problem here:
https://xiaomi.eu/community/threads/mi5-bricked-i-bricked-my-new-mi5-with-miui8.32439/
cg730620 said:
Never lock the bootloader if:
- your phone was delivered Chinese version and you flashed Global firmware
- your phone was delivered Global version and you flashed Chinese firmware
- you changed system, vendor, boot or recovery partition
- you installed a custom or modified stock rom
ARB isn't an issue with this phone I suppose. Because I was on 11.0.5 and rolled back to 10.2.5 without problems.
Have you tried MiFlash Pro?
See here:
https://forum.xda-developers.com/redmi-7a/how-to/miflash-pro-t4030809
---------- Post added at 04:01 AM ---------- Previous post was at 03:38 AM ----------
It seems that error is related to your computer. Reinstall drivers and MiFlash.
QDLoader Drivers:
http://www.mediafire.com/file/0jfq2r7adylnltu/QDLoader_HS-USB_Driver.zip/file
ADB driver:
http://www.mediafire.com/file/qskct06xyx1iivs/ADB%2Bdriver%2Bv1.17%2Blite.zip/file
MiFlash:
http://www.mediafire.com/file/bdjugf3zx7037yl/MiFlash2018-5-28-0.zip/file
Read about a similar problem here:
https://xiaomi.eu/community/threads/mi5-bricked-i-bricked-my-new-mi5-with-miui8.32439/
Click to expand...
Click to collapse
but im sure i have all drivers installed in fact i used mi flash more than once and it worked perfectly fine, and i swear i didnt try to lock it or anything, what happened is, mokee auto updates installed add on magisk and it was the latest version so i think this might have bricked it. idk..
ok i downloed all the drivers and reinstalled them, same error : "library not registered"