Database Users

Hard Bricked Yureka...Need Urgent Help

Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME

Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/

But my phone does not boot into fastboot

Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794

HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.

Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.

I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days

Exactly me too flashed miui of f2 without boot.img..Was trying to port...

@ Suhas Is the new phone same as old one or a used one??

suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:

Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb

quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find

suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip

Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.

my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..

You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.

suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help

my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls

my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:

issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.

Xiomi redmi 2 prime totally dead

Hello, please anyone one can help me? i just updated the supersu binary meanwhile in background Twrp is installing in my phone but the its on process and mobile is restarted and shows me the MI logo and after that just shows the blank screen. i tried developer rom, flashing rom, stock rom to install and start the mobile. flashing shows the status of success but my phone still be in same situation. even only mobile goes into fastboot mode. also one thing that i when started mobile and after that i have to remove the battery to switch off the mobile. please help me if you have any type of solutions? Thanks

Ever tried fastboot?

100% EMMC problem. I also just fix that issue by changing EMMC.

Leeco Le S3 x626 red led of death brick

Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks.

Try to uninstall all drivers of your device , use USBDeview to uninstall hidden and follow this
USBDeview
http://www.nirsoft.net/utils/usb_devices_view.html
https://forum.xda-developers.com/android/help/guide-leeco-le-s3-x626-x622-unbrick-t3705542

marksklava said:
Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks, i am sorry for this frantic language, i am just really panicked.
Click to expand...
Click to collapse
you need flash it at MTK SP tools. it will unbrick it .

My LeEcho S3 X626 did the same thing, but not while installing anything. I put it on the charger overnight and now it only shows the red charging light when plugged in, it won't boot and and it won't do anything. Win 10 computer doesn't recognize it, so how can I get into it? There's no android boot screen, nothing. I've tried power and volume up volume down, there is no response at all!

Pls my letvleeco is dead it only shows a red notification light when it's plug in with d cable and my pc does not detect it and it won't boot up or display anything on d screen

No service and after restart stuck in bootloop

My asus ze550kl is suddenly network dropped and no service after that i tried rebooting my device but device is stuck in bootloop for 3 to 4 hours and finally after that the device was started normally but after two months the same problem occurred and device is starting after 5 hours booting i didn't find what is the problem actually. Please help me thank you

Same issue

Same here.

Sreekanth470 said:
Same issue
Click to expand...
Click to collapse
Any idea how to solve

[HELP THREAD] Poco M3 Bricked (No Recovery, No Fastboot, ONLY EDL)

Hey guys! I made a newbie mistake by not using mi flash tool and use manual flashing using sdk fastboot and i dont know what mistake i did but im pretty sure i did something wrong. Bootloader is already unlocked and i have root access already. Right after i flashed a magisk patched boot file to give root access and booted it up. The wifi wasnt working and tried to flash a stock rom again hoping it will fix the wifi not turning on problem, but unfortunately i think i flashed wrong rom or something and it basically bricked. Cant boot to recovery nor fastboot. but mi flashtool and QFIL can detect it. Tried flashing stock rom that i downloaded from official website and Mi flash tool will always fail at authentication and it says "only nop and sig tag can be received before authentication" and other different errors like resdump(etc. cause i dont understand. I tried QFIL using test points i found on google. and it will say Sahara fail or sometimes "firehose fail fhloader fail the system cannot find the file specified". Im not really good at this and really regretting rooting it. I cant give it to Xiaomi Phone centers because i bought it from overseas and there are no xiaomi phone centers in my country.
Can someone with a kind heart help me with this problem? Thank you very much.

Hello! Sorry to say this, but it is pretty much dead. You are in EDL mode, which Xiaomi locked out and you need to have an authorized service account to unbrick it through Mi Flash. A free way to do this would have been to find a patched programmer file, but it doesn't exist yet. I recommend you to ask every phone service in your city if they have an authorized service account or if they have USB Dongles (like Miracle Box or Hydra) for unbricking.

Theres no other choice.. only service center could handle it..

TheAlmigthyOne said:
Hello! Sorry to say this, but it is pretty much dead. You are in EDL mode, which Xiaomi locked out and you need to have an authorized service account to unbrick it through Mi Flash. A free way to do this would have been to find a patched programmer file, but it doesn't exist yet. I recommend you to ask every phone service in your city if they have an authorized service account or if they have USB Dongles (like Miracle Box or Hydra) for unbricking.
Click to expand...
Click to collapse
You
TheAlmigthyOne said:
Hello! Sorry to say this, but it is pretty much dead. You are in EDL mode, which Xiaomi locked out and you need to have an authorized service account to unbrick it through Mi Flash. A free way to do this would have been to find a patched programmer file, but it doesn't exist yet. I recommend you to ask every phone service in your city if they have an authorized service account or if they have USB Dongles (like Miracle Box or Hydra) for unbricking.
Click to expand...
Click to collapse
It can be fixed using heat its not totally dead I've done this temporary solution many times on my POCO

I fixed mine using THIS but just temporary solution there is no permanent solution at the moment,

Darkvintage09 said:
I fixed mine using THIS but just temporary solution there is no permanent solution at the moment,
Click to expand...
Click to collapse
i used thqt qnd still not fix it

Yeh at least we can still use it just to get the device booting up

What do you mean temporary solution?

Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "​Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.

bjsalcedo10 said:
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "​Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
Click to expand...
Click to collapse
Wonderful!!!! it really works on my Redmi 9T...cheers

Hello thank you it's work
I managed to turn my poco m3 back on which was in edl. can i restart without worrying that i'm still in edl? Do you know? thank you

totodu13190 said:
Hello thank you it's work
I managed to turn my poco m3 back on which was in edl. can i restart without worrying that i'm still in edl? Do you know? thank you
Click to expand...
Click to collapse
No, same will happen again. It was issue with my Poco M3 too.
Don't restart, recover your data to PC or other mobile. It's a firmware to motherboard issue. Same happened with me, the set was in warranty, I took it to warranty service centre and they replaced motherboard Free of cost, now it's working fine

For all those friends having Poco M3 and having brick issue. Battery drains in 5-7 days. Attempt restart, if successful, recover your data to PC or other mobile. It's a firmware to motherboard issue. Same happened with me, the set was in warranty, I took it to warranty service centre and they replaced motherboard Free of cost, now it's working fine

Asif9 said:
For all those friends having Poco M3 and having brick issue. Battery drains in 5-7 days. Attempt restart, if successful, recover your data to PC or other mobile. It's a firmware to motherboard issue. Same happened with me, the set was in warranty, I took it to warranty service centre and they replaced motherboard Free of cost, now it's working fine
Click to expand...
Click to collapse
For how much time does it work ? Is it a permanent fix ? The service center did the same for my Poco M3 (replacing motherboard) but I'm afraid it will go deadboot again one day.

Darkvintage09 said:
I fixed mine using THIS but just temporary solution there is no permanent solution at the moment,
Click to expand...
Click to collapse
Can you explain how to managed to fix it?

https://forum.xda-developers.com/t/poco-m3-does-not-turn-on-anymore.4286783/post-85692315
https://forum.xda-developers.com/t/...no-fastboot-no-recovery.4363681/post-86748309

Lingatsu said:
For how much time does it work ? Is it a permanent fix ? The service center did the same for my Poco M3 (replacing motherboard) but I'm afraid it will go deadboot again one day.
Click to expand...
Click to collapse
After service centre motherboard replacement the set is working fine, it has updated Miui to 12.5 too. No more issues.

Asif9 said:
After service centre motherboard replacement the set is working fine, it has updated Miui to 12.5 too. No more issues.
Click to expand...
Click to collapse
It's been more than six months after replacement motherboard.

bjsalcedo10 said:
Hi Everyone, Just wanted to share the solution that we found out. My Friend had his Poco M3 Bricked, dead boot. No recovery, No display(totally black screen) and when I plug it in via USB it shows "
Qualcomm HS-USB QDLoader 9008 "​Been here about a month ago hoping that there is a solution. We tried the rubber band Method(See the attached image how to do it) you just need a cotton buds and a rubber band. Just place the tip of the cotton bud into the power button and secure it with rubber band 2 knots. So it's pressing the power button that way it's draining the battery it took him 2 days to drain it, But once the battery is drained the Charging Icon will display in the screen. And you can charge it and wait for it to boot up. This worked for my Xiaomi Redmi 9T and my Friend Poco M3 bot uses MIUI 12. After it boot again try to Avoid restarting it and Shutting it down so this may never happen Again.
Click to expand...
Click to collapse
How do I understand that it is ready to be connected to the battery charger? low battery icon will appear on the smartphone screen? thank you

It's already solved in this thread, you have to go back and find it.
[SOLVED*] POCO M3 stuck in EDL (No Fastboot, No Recovery)
―――――――――――――――――――――――――――― My Case | The Beginning (November 18, 2021): ―――――――――――――――――――――――――――― A while ago I unlocked Bootloader from my POCO M3 European [EU] [citrus] and downgraded MIUI (12.5.2.0 to 12.0.3.0) because the update had...
forum.xda-developers.com