Related
Hi ..I am using idea blade(india branded zte blade),
I have tried to unlock the ram of my phone using tpt method....
But the procedure got stuck at 98%.
ANd when i restarted my mobile some irregular green lines appear on the screen and they never disappear.
Finally i hav tried to install the original stock rom....
For that,I have flashed stock recovery first to uninstall cwm recovery..and it worked fine
The cwm recovery tool has been uninstalled.
But now...when i try to istall the original stock ....it fails and gets stuck at FTP screen...
when i start my mobile normally,it automatically goes to FTP mode....
Iam searching for any solution since a week..but iam unable to find one...
Please help me in this regard.........
Thanks in advance ..........
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you
Hello all,
I have been a long-time peruser of this site, but this is the first time I couldn't find a good answer to my issue.
My phone (SM-G950F) ran out of power, I didn't notice till after it died completely. When I tried to turn it on while charging it displays the message "Custom binary blocked by FRP lock" on the logo screen, then turns off. If plugged in to a charger, it'll just keep booting like that in a loop. I'm not even able to access recovery, only the download mode. I'm not against factory resetting my phone, however I have important data that in the phone storage I need to keep. I have searched online and youtube with no success.
Any ideas or suggestions will be much appreciated.
NOTE: Before the phone battery died, i wasn't tinkering with any setting that may lead to this; just regular use
flash it with odin
Flash official firmware..but make sure to use HOME_CSC not CSC...to keep your data...then boot direct to download mode after flashing ia done and flash twrp recovery
I have same issue bot Windows dosn't see my phone (drivers installed) so I'm unable to flash it. I can see only unrecognizable device in windows device manager. Is there any hope to fix it. Please help
mic225 said:
Flash official firmware..but make sure to use HOME_CSC not CSC...to keep your data...then boot direct to download mode after flashing ia done and flash twrp recovery
Click to expand...
Click to collapse
How to rid rmm and kg without 7 days?