Just tried flashing a custom recovery and it falied sayig too many links and the phone won't even start now not even the led is blinking. Everything is dead and only an alert sound comes from pc when I connect to it. It doesen't go to fastboot also.
Any solutions?
Never mind my power button is not working so i think its time to change the device
Related
Hello,
my friend has a problem with his phone. He neither installed a custom rom, nor he rooted it. He updated OTA and after a week, while he was talking, the phone shut down.
When he powers it on the screen lights up and nothing else happens. Sometimes the vodafone splash came up, but nothing more.
I don't know if the phone boots into recovery as I don't see anything on the screen.
I tried booting to fastboot mode, and the pc detects it. But I whatever I try to do, (flash,erase etc) I get the error: Remote not allowed...
Any ideas how to fix it?
try a new ROM?
How? The screen shows nothing... And i haven't rooted it so I can flash another rom
did you try to turn it on and push VOL- to go into SPL menu
yes th screen lights up and but it shows nothing
my x10 suddenly switched off and whenever i tried to power it on , only a vibration and green led flashes continuously like notification, nothing showed up in screen.
when i attach my phone without bringing it "flashmode" to pc via usb Flashtool shows that its in flash mode and after 2 sec it says "device disconnected", this thing continues until i disconnects my phone.
bootloader:- unlocked.
rom:- rooted stock GB.
Please help me.
Hello sir,
I tried miui 6 l based cyanogen mod for my yu yureka by seeing in your forum only and it run very well in my device except problem of charging. So i just put miui 6 kitkat based rom and i tried flashing it through twrp. Unexpectedly it failed and just not resisting to the problem
opened updater in miui 6 L based one and just kept the rom of miui 6 kitkat and proceeded further. And here i finally ended with auto restart and full of vibrations. I just removed the battery and started again. This time it boomed. No more response from mobile and no yu logo. When i kept charging just it gives a red light indication and no more yu logo. And i cant enter into the bootloader even. No more chance to switch on the fastboot mode. I dont know what we call it either soft bricked or hard bricked but please help me out with the problem i am facing right now. I hope you ppl will respond asap.
Thanks in advance
ravitejasingari said:
Hello sir,
I tried miui 6 l based cyanogen mod for my yu yureka by seeing in your forum only and it run very well in my device except problem of charging. So i just put miui 6 kitkat based rom and i tried flashing it through twrp. Unexpectedly it failed and just not resisting to the problem
opened updater in miui 6 L based one and just kept the rom of miui 6 kitkat and proceeded further. And here i finally ended with auto restart and full of vibrations. I just removed the battery and started again. This time it boomed. No more response from mobile and no yu logo. When i kept charging just it gives a red light indication and no more yu logo. And i cant enter into the bootloader even. No more chance to switch on the fastboot mode. I dont know what we call it either soft bricked or hard bricked but please help me out with the problem i am facing right now. I hope you ppl will respond asap.
Thanks in advance
Click to expand...
Click to collapse
Your device is Hard bricked beacuse u are crashed your bootloader...
No guarantees but this may help get a device back into fastboot mode
Pull the battery out
Plug a good micro usb cable directly into a computer (no hubs/keyboards/monitors/extensions/etc)
hold the volume up button (hard to do with the cover off but it is doable)
Plug the cable into the device (while still holding the button)
put the battery back in (while still holding the button)
if it works it'll boot immediately into fastboot mode without having to hit power.
From there you can fastboot flash -i 0x1ebf all the img files from the cyngn support page; remember to edit flash-radio.sh to have the -i 0x1ebf and run the script first to get the bootloader and friends set up right. (take out any #!/bin/sh first line and rename it to flash-radio.bat if you're on windows) Alternatively you may be able to fastboot -i 0x1ebf reboot and have the device boot normally since you've jogged it out of the not-powering-on thing but if you've been flashing things this may or may not work.
Hello sid,
I am grateful to you for giving me the solution. Yesterday i gone through the same procedure which you instructed me to do and my mobile haven't responded for even that procedure. If you have any other option to do overcome that problem please let me know . As the customer service of yu is the worse i finally have to be made by myself and have to come out of this.
Thanks in advance
Hi guys,
Was trying to remove the branded rom that came with the phone, neither method of updating worked so i flashed via fastboot the boot, recovery, cust and system images, everything ok the first time, afterwards i tried a different rom and the phone got stuck at the bootlogo, coudn't turn it off, do nothing, left it and i went to sleep, of course the battery died.
Now the phone led is always blinking red no matter how much time i leave charging or connected to pc and can't enter fastboot mode or recovery or update 3 buttons..?
Any ideas? Is it completly dead?
PS: Later was able to turn it off and now it turned itself on (because its connected to charger) and the led isn't blinking anymore, still stuck on bootlogo and nothing happens...
hackerpower said:
Hi guys,
Was trying to remove the branded rom that came with the phone, neither method of updating worked so i flashed via fastboot the boot, recovery, cust and system images, everything ok the first time, afterwards i tried a different rom and the phone got stuck at the bootlogo, coudn't turn it off, do nothing, left it and i went to sleep, of course the battery died.
Now the phone led is always blinking red no matter how much time i leave charging or connected to pc and can't enter fastboot mode or recovery or update 3 buttons..?
Any ideas? Is it completly dead?
PS: Later was able to turn it off and now it turned itself on (because its connected to charger) and the led isn't blinking anymore, still stuck on bootlogo and nothing happens...
Click to expand...
Click to collapse
Hi,you can try what i post here it might work
If you cannot get into fastboot or recovery, try connect it via USB to a PC, then hold volume + power up, release power up when it turns on but keep holding vol up.
cristi.blidariu said:
Hi,you can try what i post here it might work
Click to expand...
Click to collapse
yodaofborg said:
If you cannot get into fastboot or recovery, try connect it via USB to a PC, then hold volume + power up, release power up when it turns on but keep holding vol up.
Click to expand...
Click to collapse
Already tried every sinlge thing/combination, can't get past the boot logo, or seem to charge up the phone, red led always blinking.
Will try to open phone tomorrow disconnect the battery and connect again and try to enter bootloader to flash the 4 .img and get back in business.
Hey! It seems like that you hard bricked your device! Is your P8Lite still under warrenty? Rooting IS allowed in the Huawei warrenty! If you dont have warrenty, Ask some proffesionals.
Have a nice day!
P.S: Im living in Germany. Thats why my english is so bad.
Hello friends, I have a pretty specific issue with my Mi A1. My phone suddenly stopped booting and doesn't launch. No matter which buttons I press. When I connect the charger, the blue LED starts blinking and it keeps blinking as long as the charging cable is connected.
I looked at previous forum posts and tried all the solutions but none of them worked for me. However, when I connect the phone to a computer, I get the Qualcomm 9008 mode and when I try to flash a fastboot ROM using MiFlash it actually flashes normally and shows "Success".
Since the phone is able to flash a ROM normally, could this be a faulty LCD screen? Or is this an issue with a faulty motherboard or something else?
if it shows 9008 then its in edl mode when u flash the rom press power on button for 10 to 15 seconds for booting it. and if it won't boot then i think its some kind of hardware issue