Hello sir,
I tried miui 6 l based cyanogen mod for my yu yureka by seeing in your forum only and it run very well in my device except problem of charging. So i just put miui 6 kitkat based rom and i tried flashing it through twrp. Unexpectedly it failed and just not resisting to the problem
opened updater in miui 6 L based one and just kept the rom of miui 6 kitkat and proceeded further. And here i finally ended with auto restart and full of vibrations. I just removed the battery and started again. This time it boomed. No more response from mobile and no yu logo. When i kept charging just it gives a red light indication and no more yu logo. And i cant enter into the bootloader even. No more chance to switch on the fastboot mode. I dont know what we call it either soft bricked or hard bricked but please help me out with the problem i am facing right now. I hope you ppl will respond asap.
Thanks in advance
ravitejasingari said:
Hello sir,
I tried miui 6 l based cyanogen mod for my yu yureka by seeing in your forum only and it run very well in my device except problem of charging. So i just put miui 6 kitkat based rom and i tried flashing it through twrp. Unexpectedly it failed and just not resisting to the problem
opened updater in miui 6 L based one and just kept the rom of miui 6 kitkat and proceeded further. And here i finally ended with auto restart and full of vibrations. I just removed the battery and started again. This time it boomed. No more response from mobile and no yu logo. When i kept charging just it gives a red light indication and no more yu logo. And i cant enter into the bootloader even. No more chance to switch on the fastboot mode. I dont know what we call it either soft bricked or hard bricked but please help me out with the problem i am facing right now. I hope you ppl will respond asap.
Thanks in advance
Click to expand...
Click to collapse
Your device is Hard bricked beacuse u are crashed your bootloader...
No guarantees but this may help get a device back into fastboot mode
Pull the battery out
Plug a good micro usb cable directly into a computer (no hubs/keyboards/monitors/extensions/etc)
hold the volume up button (hard to do with the cover off but it is doable)
Plug the cable into the device (while still holding the button)
put the battery back in (while still holding the button)
if it works it'll boot immediately into fastboot mode without having to hit power.
From there you can fastboot flash -i 0x1ebf all the img files from the cyngn support page; remember to edit flash-radio.sh to have the -i 0x1ebf and run the script first to get the bootloader and friends set up right. (take out any #!/bin/sh first line and rename it to flash-radio.bat if you're on windows) Alternatively you may be able to fastboot -i 0x1ebf reboot and have the device boot normally since you've jogged it out of the not-powering-on thing but if you've been flashing things this may or may not work.
Hello sid,
I am grateful to you for giving me the solution. Yesterday i gone through the same procedure which you instructed me to do and my mobile haven't responded for even that procedure. If you have any other option to do overcome that problem please let me know . As the customer service of yu is the worse i finally have to be made by myself and have to come out of this.
Thanks in advance
Related
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
seasen said:
Hello everyone,
i tried installing CM11 on my d802 with CWM. Flashed the zip and worked fine but im now hanging in a boot loop and only the CM splashscreen is showing. I tried to boot into recovery but it wont let me, only thing working is the download mode. I searched a couple of threads here but didnt really found anything that helps me.
Hope someone got an idea how to get my G2 working again, dont even care much if its stock or CM.
Click to expand...
Click to collapse
This happend to me with my LS980, heres what I did, i waited until my G2 was fully charged, i knew it was fully charged becuase in download mode you should see the letter B, the letter B indicates the battery, if your battery is at "B100" detach your phone from the charger, hold the power button for the phone to restart, and quickly press and hold the power button and the volume down button at thw same time,, repeat this step again quicly after the Boot Logo shows up, and you should boot into Recovery Mode and restore your backup.
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
I tried that for like a 100 times, it wont start into recovery. it just starts back to the splashscreen.
trying this now : http://forum.xda-developers.com/showthread.php?t=2432476
howw to charge the phone when it on bootloop,whenever i plugged the cable its start bootloop
Dear Team,
A brief history
I have a LG G2 D802 with Cyanogenmod 13 installed, It was working fine for a month or so. I used to flash CM13 nightlies and use comfortably. I use the TWRP recovery. Every now and then, there used to be the "error updating from zip" while flashing, but have managed to reflash and make things work somehow. Worst case scenario, I used to put the phone in download mode and flash stock Lollipop rom and then root and flash CM 13.
Current Situation-Problem
Last week while flashing the latest CM 13 nightly, the "error updating from zip" came and then whatever I tried couldn't make the phone boot normally. Finally decided to go into download mode and flash stock Lollipop rom. Unfortunately, half way through the process, the flash tool showed an error and I made the dumbest decision of pulling the usb cable from the laptop. Post that, the phone is always booting to LG boot logo and staying put. I tried rebooting to recovery and putting it in download mode, so many times. Every time I am greeted by the stubborn LG logo mocking me at my frustration
Please let me know your thoughts. If I can manage to put it into download mode somehow, I am confident of bringing my G2 back to life. Kindly assist me with your inputs.
This is my first post on XDA, kindly bear with me in case I have made any mistakes.
Thanks in advance,
TekGru
About 2 months ago I couldn't access Download Mode and I realized that it was probably because I couldn't really turn off the phone, like we can do to any phones with removable battery. So I've searched YouTube and found some videos teaching how to remove back cover and unplug the battery pin. After doind that I've waited about 30 seconds, replugged it and tried to access Download Mode and... violà, success
Note that you don't have to remove the battery, just unplug the pin, so the phone turns off completely.
This problem started when I moved back to Arya from a 5.1.1 port few days ago. I didn't bother much, cause I keep my phone on always, but whenever I wanted to go to Recovery or reboot the phone it would not boot, would stuck at the Note 3 N9005 logo and I had to do a battery pull to solve the problem, so yesterday I thought about flashing a stock ROM via Odin, and now the phone won't boot at all regardless of the battery pull method!
I can't enter recovery either, it stays at the Entering recovery (SELinux status screen) for a few seconds and then just a black screen with nothing at all. I did flash the TWRP tar image via Odin after flashing stock ROM yesterday, so that I can do a complete wipe, but nah, can't enter TWRP. Download mode however works after a battery pull.
Here is a video, probably the worst quality video you have seen lately, but it still does show the problem :laugh: So kindly tell me what to do! I have a non working phone for over 12 hours now, and I am realising how much I depend on a phone now, that feeling is inexpressible.
how did you solve it ?
i didnt do anything with my yureka, tomorrow its battery dropped down and switched off so i put it on charging after decent charge upto 80%, then i tried to switch i on but its stuck at cyanogen logo.
here's what i already tried 1. i went to recovery and wiped data and tried rebooting. nothing happened still stuck at cyanogen logo/
2. i tried unlocking bootloader but i cant, coz i cant turn on usb debugging. and all in one toolbox needs my device in turn on state which i cant do.
3. i downloaded a custom rom of marshmellow cm13 but it gave me signature error when i tried to flash it via stock recovery.
4. then i downloaded the rom provided to me via cutomer support it sucessfully flashed but still stuck at cyanogen logo/
now m fedup i dont know what to do please give me sugestions thank you.
I took it to service center and they said motherboard is faulty and asked 6000 fr repair, i was hopeless coz i tried unlocking bootloader it said ok and then tried installing custom recovery but nothing happened it still boots in stock recovery then i used
Fastboot -i 0x1ebf boot recovery so it boots in twrp and then i was able to access internal memory and flash new rom but to my surprise it also got stuck at boot logo. So i guess now i have no other option but to buy new phone.
I come to this point that yureka phones/ micromax phns are not very good phn to buy all micromax phns ive ever came across didnt stood fr more than one year.
Hi Guys .
I am having some problems with spice dream uno Mi-498H
2 days before settings in mobile wasn't opening so i tried to restart the phone and it was stuck a android boot logo.
then i left it for 5 mins and then i went off . i tried to switch it on but it wasn't getting on . now when ever i plug it to charging it shows battery logo for 2-3 secs and again gets off .this happens again and again when phone is getting charged . also power + volume up isn't working when phone is not charging but if i press volume up when phone is charging and battery icon is just about to show (as i mentioned battery icon shows up for 2-3 secs and gets off and repeats) i am able to see recovery mode . fast mode etc. but whenever i try to select any of then phone again gets off .
Then i tried to flash with sp flash tool and it succeed
i used Rom from here
Spice-MI-498-Sprout-Reference-Pack-1379542-KPW53-ALPS-KK2-AOSP-SPROUT-SP-P52.zip
androidfilehost[dot]com/?fid=457095661767107402
(replace [dot] with '.' . as i am new user i am not allowed to post links)
But even after flashing problem is same as mentioned above . If anyone has any idea please help .
my problem no charging,nothing Dead
i have flashed it with sp flash tool numerous time but nothing worked at all. even no charging or volume button working to enter recoverry----- I was wonder that how factory person install in spice dream uno , plz give any knowledge on that coz sp tool is dumb totally ........ i am windows XP sp2 user