I got a replacement device from OP and I was unlocking the bootloader and rooting it. The guide i used had the incorrect patched boot image and everything went bad quick.
I can't go anywhere except fastboot now, can't boot to OS, no OS installed.
TWRP WAS booting from fastboot, I pushed the rom from there and flashed it...said no OS installed after, I installed it on both slots.
I can't get into EDL mode, the volume keys work...I think, but the second I let go of them when it's plugged in it defaults back to fastboot immediately. I tried the bat file that people use, says it worked, phone stays in fastboot.
I even tried holding the volume keys the entire time but the MSM tool wouldn't read it enough to flash anything, although it did read it enough to register some data, but was stuck on "waiting for device".
I am in need of some major help. Now I can't even temp boot to twrp, getting an error failed authorization. I'm afraid I really messed things up.
I have 5 days to send my old device back. Please help!
May be a longshot, but does the stock recovery work? Maybe try sideloading the full OTA zip from there?
Sent from my IN2025 using Tapatalk
For EDL mode, you need to hold the buttons then plug it in while continuing to hold the buttons. It won't work if the phone is already plugged into a usb port and then you try and get into EDL.
Really hard to brick a OnePlus device in my experience.
FernBch said:
May be a longshot, but does the stock recovery work? Maybe try sideloading the full OTA zip from there?
Click to expand...
Click to collapse
Recovery doesn't work. I was able to get to one of the steps to approve going into fastboot, advanced, reboot to fastboot, but not anymore.
Mike02z said:
For EDL mode, you need to hold the buttons then plug it in while continuing to hold the buttons. It won't work if the phone is already plugged into a usb port and then you try and get into EDL.
Really hard to brick a OnePlus device in my experience.
Click to expand...
Click to collapse
I was doing just that. It seemed to work initially but after I plugged it in and released the buttons it went back to fastboot and disconnected from MSM.
Make sure MSM is ready keep vol up/down pressed, connect cable and immediately press Start in the tool. Have done it like this 3-4 times with my Pro
Please read this https://forum.xda-developers.com/showpost.php?p=82508527&postcount=67
and this https://forum.xda-developers.com/showpost.php?p=82658631&postcount=85
both work for me.
lazyd2 said:
Make sure MSM is ready keep vol up/down pressed, connect cable and immediately press Start in the tool. Have done it like this 3-4 times with my Pro
Click to expand...
Click to collapse
I ended up using the fastboot ROM flash all.bat from this thread: https://forum.xda-developers.com/oneplus-8-pro/how-to/rom-stock-fastboot-roms-oneplus-8-pro-t4083997
I am now booting into the OS and the stock recovery came back. So good news is the phone isn't bricked.
Glad you sort it out
lazyd2 said:
Make sure MSM is ready keep vol up/down pressed, connect cable and immediately press Start in the tool. Have done it like this 3-4 times with my Pro
Click to expand...
Click to collapse
lazyd2 said:
Make sure MSM is ready keep vol up/down pressed, connect cable and immediately press Start in the tool. Have done it like this 3-4 times with my Pro
Click to expand...
Click to collapse
It work, thanks
You're a life saver
Related
Okay so I seem to have run into a little problem I was planning on updating cleanrom up to 1.2.5 but was on cwm. I had managed to switch over successfully to twrp 2.2.0. I went ahead and used goo manager to download the updated zip of 2.2.1 and tried flashing it thru twrp. Now I am stuck in google bootloop and cant get into recovery or more importantly bootloader. I have been trying last 30mins to hold power and both volume buttons but it either keeps rebooting back to the google screen or not doing anything at all just have to repress to to turn it off but it will turn back on automatically. I tried hooking it up to my usb and labtop but it looks like it wont even recognize it. I just fully charged it so I am good for now just a little worried cant get out of this mess.
I ran into a problem like that with clockwork recovery it kept on rebooting in recovery but I could still go into download mode I was at work away from my computer so I had no choice but to keep trying that three button magic until it finally restored a backup I had on my external card.just keep on trying to pull the battery then try to go into recovery. You might 've gotten a bad download
Sent from my SGH-T999 using xda premium
problem is I cant get into recovery. or the green screen to get to bootloader. It just completely stuck in a bootloop on the google screen mocking me... I am really contemplating opening it up and taking out battery but is that a good idea? Or is there anything else I can do?
so I pulled off the back cover but really dont want o disconnect the battery might mess something up but I cannot get the device to shut off.
disconnecting the battery does nothing it shuts it off and keeps it off but when I connect it to the charger the battery symbol pops up for a second and then goes completely blank. I went ahead and tried again to boot into bootloader pressing power vol up + down and all combinations of power vol -, power vol +
power turbo press vol +/- but no luck still in google screen.
If you're in a bootloop you need to connect your Nexus 7 to a computer. Then you will be able to access recovery via the Power button and volume buttons.
is it going to make a difference that everytime i try to reboot it just the black google screen? I have tried it connected to the wall charger and connected usb to the labtop but nothing.
clago87 said:
is it going to make a difference that everytime i try to reboot it just the black google screen? I have tried it connected to the wall charger and connected usb to the labtop but nothing.
Click to expand...
Click to collapse
It's supposed to do that when you're trying to go to recovery from bootloader without the USB cable plugged into a computer, may need to have the drivers installed on said computer. It's an issue with the nexus 7 bootloader and every one of them does it. What your experiencing is perfectly normal if you tried to go to recovery from bootloader with the bolume buttons and then got the google screen bootloop.
If it doesn't work when you plug it in and try, then try unplugging it, manually rebooting with it plugged in first, or vice versa
Update: I can get on Team Viewer and remotely reboot you into recovery through the PC if you want, or at least give it my best shot.
ok so i disconnected battery and have the device off. I should then try connecting it to the pc and try booting up holding down all buttons?
clago87 said:
ok so i disconnected battery and have the device off. I should then try connecting it to the pc and try booting up holding down all buttons?
Click to expand...
Click to collapse
Have you installed the right drivers on the computer you're using, for ADB and the device drivers, when you unlocked and rooted?
Answer to your question is yes try that. But I wouldn't be disconnecting and reconnecting it, I can't recommend that and then learn tomorrow that static zapped something important.
yea I am getting nothing by connecting to pc. I have all the drivers adb and fastboot installed when I rooted and unlocked couple weeks back but it looks like device is not being recognized or read at all by the pc.
connecting to the pc holding the volume + button gets it recognized for a second and tries to install a driver apx but unsuccessfully.
I am not making any progress whatsoever kinda sucks starting the weekend like this. I have gone thru some bad stuff with my atrix but nothing like this were I cant even access my bootloader boot into recovery or even fastboot. Should I try and get it to just stay off and see if overnight it works its own magic? Hate going to sleep witht his on my mind but I think with a clear mind in the morning something good will happen.
I can get it to stay off by holding both vol+ and vol- but trying to turn it off with just the power button just keeps it turning back on/off...
so I slepted on it thru the night let the tablet rest but went back this morning and I still cant get into bootloader or recovery. Is there anything I can do?
Has anyone else had this problem where they cant boot into recovery or bootloader? It's like the power button and vol keys are unresponsive even though they still work to turn on the device.
are you sure that you flashed the right recovery? but you should still be able to get the bootloader. are you pressing power + volume down(volume down, not both volume buttons. i noticed you wrote both volume buttons) to get into the bootloader?
I think I chose the right recovery the first version downloaded thru goo manager but it was the 2.2.0 version. I had the option on the of downloading the 2.2.1 zip or the .img but i downloaded the .img to just to flash with the current version of twrp that was working. There have been times were I have not been able to get into recovery on my atrix or htc but I've always been able to get into the bootloader this is the first time I've been locked out of my device kind of got me scared its not even a month old. So you say to get into bootloader you dont have to hold down both volume buttons? I will try again to power back up using the volume down and power button at same time... Wish me luck
clago87 said:
I think I chose the right recovery the first version downloaded thru goo manager but it was the 2.2.0 version. I had the option on the of downloading the 2.2.1 zip or the .img but i downloaded the .img to just to flash with the current version of twrp that was working. There have been times were I have not been able to get into recovery on my atrix or htc but I've always been able to get into the bootloader this is the first time I've been locked out of my device kind of got me scared its not even a month old. So you say to get into bootloader you dont have to hold down both volume buttons? I will try again to power back up using the volume down and power button at same time... Wish me luck
Click to expand...
Click to collapse
good luck!
yea, only power button and the volume down button.
quick question before I connect the battery does it make a difference whether or not I have it plugged in charging or connected to the PC while trying to boot into bootloader?
I dont know what happened but I rebooted my phone today and it booted into fastboot.. I cannot in any way get it to boot normally. The buttons are not being held down and I have tried to pull the battery.. I dont get it, anyone else have this issue and fixed it have an idea??
Was it stock (including recovery) or modified?
I would try to fastboot the TWRP over and then boot into that (Power & Vol+). But then... I seldom run stock.
SoNic67 said:
Was it stock (including recovery) or modified?
I would try to fastboot the TWRP over and then boot into that (Power & Vol+). But then... I seldom run stock.
Click to expand...
Click to collapse
No, it wasn't stock and I dont know what happened.. I was running the latest CM13 and rebooted this morning and it freezes up with the ASUS logo and saying "Fastboot Mode!!!" at the top... I've tried flashing twrp via fastboot but not getting anything.. I need a copy of the stock firmware with the boot system and recovery image in it but I'm having a hard time finding it.
BiasedThunder said:
I dont know what happened but I rebooted my phone today and it booted into fastboot.. I cannot in any way get it to boot normally. The buttons are not being held down and I have tried to pull the battery.. I dont get it, anyone else have this issue and fixed it have an idea??
Click to expand...
Click to collapse
I too had this issue. Tried lot of key combinations. Didn't work. My solution was to connect to PC and run
fastboot continue
Then it booted normally. Everything stock.
Hope this helps.
BiasedThunder said:
I dont know what happened but I rebooted my phone today and it booted into fastboot.. I cannot in any way get it to boot normally. The buttons are not being held down and I have tried to pull the battery.. I dont get it, anyone else have this issue and fixed it have an idea??
Click to expand...
Click to collapse
Phones boots into fastboot mode in two situations
1. Pressing vol up and power button simultaneously for rebooting
2. Your phone doesn't have recovery AND any OS installed
I guess your vol up button is constantly in pressed state.
Second situation cannot occur unless you wipe your system and recovery manually. So you are in the first situation
Your phone's vol up button is constantly in pressed state or electrically shorted may be due to water entering the case
Solution: You will have to open your phone's case and clean the area near the volume button. I guess you had opened the case/body and didn't fit it properly.
sziraqui said:
Phones boots into fastboot mode in two situations
1. Pressing vol up and power button simultaneously for rebooting
2. Your phone doesn't have recovery AND any OS installed
I guess your vol up button is constantly in pressed state.
Second situation cannot occur unless you wipe your system and recovery manually. So you are in the first situation
Your phone's vol up button is constantly in pressed state or electrically shorted may be due to water entering the case
Solution: You will have to open your phone's case and clean the area near the volume button. I guess you had opened the case/body and didn't fit it properly.
Click to expand...
Click to collapse
something happened when it rebooted and it lost recovery.. I fastboot flashed the new TWRP and reflashed the rom and all seems fine now.
Thanks for the quick responses!!
even I've witnessed a similar problem.. please help me.....out
BiasedThunder said:
No, it wasn't stock and I dont know what happened.. I was running the latest CM13 and rebooted this morning and it freezes up with the ASUS logo and saying "Fastboot Mode!!!" at the top... I've tried flashing twrp via fastboot but not getting anything.. I need a copy of the stock firmware with the boot system and recovery image in it but I'm having a hard time finding it.
Click to expand...
Click to collapse
Can any one please suggest where to find the stock firmware with the boot system....Please help me out here
Hello the second situation is happening to me. What can i do? In desperate
Help Me
Hello,
I have a similar problem. My phone is turned off and on the fastboot mode screen. Normal keys with volume keys, recovery mode, open, restart, even if I try to reboot on this screen opens. I tried to connect and format the computer, but I do not install all the drivers and files, but computers do not see my phone. Can you find me a solution?
grafikermc said:
Hello,
I have a similar problem. My phone is turned off and on the fastboot mode screen. Normal keys with volume keys, recovery mode, open, restart, even if I try to reboot on this screen opens. I tried to connect and format the computer, but I do not install all the drivers and files, but computers do not see my phone. Can you find me a solution?
Click to expand...
Click to collapse
Reinstall twrp from fastboot & install rom
I have a problem after installing TWRP on my P9 Lite i have a screen saying:
Your device has been unlocked and can't be trusted
To Learn more, visit: long www adress
Your device is booting now...
Cant put a picture because i don't know how. But this is all it says, and then nothing else happens. Just stays on that screen. Can't connect to my pc or reboot in Recovery mode it always ends here.
Hopefully one of you guys can help. In a bit of panic.
Can't shut it down, everytime i try to turn it off, it reboots into this screen.
Can tell us some more information? Like what ROM are you on now, what TWRP you used etc..
Potato997 said:
Can tell us some more information? Like what ROM are you on now, what TWRP you used etc..
Click to expand...
Click to collapse
I Used TWRP 3.1.1.0 and havn't gooten to custom rom, i am on Android Nougat with EMUI 5.0.
Cant start it other then ending on this screen. I managed to get it booting again, but now my Bluetooth didn't work. So i tryed again and now i am stuck again.
It's a B380 Model
Potato997 said:
Can tell us some more information? Like what ROM are you on now, what TWRP you used etc..
Click to expand...
Click to collapse
Just tryed to make the dload folder on the root of my SDcard but still no success. I havn't been able to start boot screen other than this locked screen.
I have tryed to start with volume up + power both volume up and down + power and volume down + power. Nothing changes, just get this screen everytime.
Cant do anything, not even shut the phone down, it only reboots. I have seen other simular problems, but they have been able to get to the screen with 3 options. I havn't been able to come to that part.
Plug USB cable to your phone but not on your computer, restart the phone and as soon as it restart press volume + (or volume - I don't remember which is fastboot) and plug the USB cable to the computer. So you can check if the bootloader is unlocked
Potato997 said:
Plug USB cable to your phone but not on your computer, restart the phone and as soon as it restart press volume + (or volume - I don't remember which is fastboot) and plug the USB cable to the computer. So you can check if the bootloader is unlocked
Click to expand...
Click to collapse
I can't get to fastboot, dosn't matter what i do. I have no clue what have happened.
stubbeDk81 said:
I can't get to fastboot, dosn't matter what i do. I have no clue what have happened.
Click to expand...
Click to collapse
After i ran out of power and the phone went out. I have been able to boot again. Anybody who knows a bootloader i can install that works on my phone for sure. My bootloader is ****ed up.
It is unlocked now, so i have to be sure it works.
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
quy said:
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
Click to expand...
Click to collapse
What I did when I was in Crash Dump Mode was,
Press and Hold Power Off and Volume Up button and release when the screen goes off. Now your phone is switched off. Now to enter the EDL mode you need to press and hold volume up and volume down buttons at the same time...and then connect the mobile to pc while still holding the buttons. Done. MSM tool will detect your phone.
NOTE : Also keep the Device Manager window open on the PC while u connect the phone to pc and check if it shows up there.
quy said:
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
Click to expand...
Click to collapse
It always seems to take me several tries to get it right. I think if I don't hit the vol +/- keys right at the exact time that's the problem. Just be patient and keep trying. The first time I did it, it took me what seemed forever. Thought maybe my phone was broken.
Sent from my IN2025 using Tapatalk
rmiles7721 said:
It always seems to take me several tries to get it right. I think if I don't hit the vol +/- keys right at the exact time that's the problem. Just be patient and keep trying. The first time I did it, it took me what seemed forever. Thought maybe my phone was broken.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
I have been doing custom roms since the old win ce devices....and yet you sir have been able to make me feel like an idiot haha. Thanks for this. you had it spot on!! thanks so much
Hello Folks. So i have found myself in this situation as well. MY phone wont go off and keeps restarting to CrashDump Mode. As such can't seem to get into EDL mode inorder to flash. Any tips? I have tried all the above methods nothing seems to work. Is there a different key combination or a fastboot command i can use to achieve EDL? Help a brother i'm going nuts. Device IN2020
HaronM said:
Hello Folks. So i have found myself in this situation as well. MY phone wont go off and keeps restarting to CrashDump Mode. As such can't seem to get into EDL mode inorder to flash. Any tips? I have tried all the above methods nothing seems to work. Is there a different key combination or a fastboot command i can use to achieve EDL? Help a brother i'm going nuts. Device IN2020
Click to expand...
Click to collapse
You just need to keep trying it. Make sure you hit vol+/- at the same time and hold for a few seconds, plug in the USB cable, then let off the vol keys. It's difficult to do and get right with two hands. Recently did it again as I wanted to upgrade to the 11 beta from a clean system. Seems like it took me forever to get it this time but eventually I did.
Use usb 2.0 port.
After using 2.0 instead of 3.0 and the phone connected stable for a while (after many tries)
able to finish the msm operation successful ..
But phone not booting .. getting black screen after 1+ logo
at this point I thought to clear cache but My phone is locked I cannot use any recovery .. I cannot even go into oneplu recovery LOL .. It seems like I am doomed
For me personally I could only get it to work on USB2.0 ports. On USB3.0 it just puts me back into fastboot mode or when it does go into EDL MSM tool just fails with a communication error immediately.
I kinda bricked mine as well messing around with GSI ROM's and flashing too hastily and to the wrong partition lol.
It has always worked for me with USB 2.0 port and non oneplus cable.
originable cable would not work for me on usb 3 or USB 2 port, but 3rd party cable start immediately with USB 2 port.
I've had the issue where EDL mode works..... for a few seconds, then the phone reboots.
Very frustrating!
The MSM Download Tool does spot the phone, but since the phone seems to reboot, I don't have enough time to do anything!
Any ideas why this is happening?
OneOfThePetes said:
I've had the issue where EDL mode works..... for a few seconds, then the phone reboots.
Very frustrating!
The MSM Download Tool does spot the phone, but since the phone seems to reboot, I don't have enough time to do anything!
Any ideas why this is happening?
Click to expand...
Click to collapse
You need to already hit start on msmtool BEFORE plugging in phone
1- start MSM tool (prepare the settings and choose the right oos)
2-keep the cable connected to one end (I prefere to keep it connected from the phone side first)
3-keep holding volume up/down for 3-4 sec and connect the other end of the cable to your PC
4-your device will be connected directly stop holding volume up/down and in msm tool press start wait for ≈300 sec
5-now your device should work as it was before
OneOfThePetes said:
I've had the issue where EDL mode works..... for a few seconds, then the phone reboots.
Very frustrating!
The MSM Download Tool does spot the phone, but since the phone seems to reboot, I don't have enough time to do anything!
Any ideas why this is happening?
Click to expand...
Click to collapse
After rebooting my pc, and fiddling with drivers, I got it all sorted finally.
Thanks for your help, folks.
Niranjan Bapat said:
What I did when I was in Crash Dump Mode was,
Press and Hold Power Off and Volume Up button and release when the screen goes off. Now your phone is switched off. Now to enter the EDL mode you need to press and hold volume up and volume down buttons at the same time...and then connect the mobile to pc while still holding the buttons. Done. MSM tool will detect your phone.
NOTE : Also keep the Device Manager window open on the PC while u connect the phone to pc and check if it shows up there.
Click to expand...
Click to collapse
This is a royal pita! I remember when it used to be fun....
Anyway, I've been trying every trick in the book, and then some, but shiznit just isn't going right! The holding of the up and down buttons would be easier if this was the pixel, but it is a tad hard to not mistakenly hit the power button on the other side.
The device manager shows the Qualcomm QDLoader and the msm Downloader is showing the infamous waiting for device... I've been at it for 8 straight hours and if there was a local OnePlus store that sold the international version of the OP8P, that's where I would be heading in a few hours.... It's really frustrating to say the least.
Anyway, when I'm in the bootloader, the device manager shows the Android phone, so I'm thinking that maybe I am in the edl mode when the Qualcomm port shows up, but like I said, the msm is waiting....
tried everything and it is constantly booting into bootloader. I even tried an adjusted fastboot script to boot into EDL but it still boots into bootloader. I have booted into EDL before on a OnePlus 7T, and I have tried multiple times by pressing the OnePlus 8 pro volume buttons at the same time, but always bootloader. Just to check, I tried doing it on my OP 7T again and it worked perfectly fine. Help????
I have had to flash stock 4 times because I land in crash dump mode and it has always been a tricky situation to get into edl.
What worked for me 100% of the time was following the steps in the youtube guide below.
From 2:30 onwards
Hope it helps
I had the same issues, but fixed once read comments as per above. Let me summarize what I did:
1. installed driver Qualcomm HS-USB QDLoader 9008 (I'm using Windows 10) - driver in a cab file should be unpacked using command expand (with proper switches) to preserve folders.
2. launched MSM DT and had it configured and then pressed Verify\Start, as EDL is available only for very short time - 2-3 secs with screen turned off.
3. as my phone was stuck in booting loop I was just keeping presses Vol+/- waiting for EDL to be entered, MDM will find the phone and start uploading data.
Just don't give up trying.
quy said:
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
Click to expand...
Click to collapse
Try different ports. My usb 3 port would force it into fastboot but usb 2 was fine.
What to do if the device doesn't have any usb 2.0 port?
So I was trying to flash a rom on this phone for the first time, I failed miserably...
Was following instructions from this thread: [ROM][OFFICIAL] Omnirom Q for OnePlus6T [Every Sunday]
After flashing the omnirom.zip I immediately tried to reboot in recovery and ended-up in a boot loop (see attached image).
I tried multiple times to go back to fastboot mode with vol-up-power combination, it did'nt worked. Always boot back to that screen.
I tried all imaginable combinations of buttons and timing but always ened-up on that screen... exept just one time where I finally ended-up in fast boot.
I dont know how I did it!
So then I pushed TWRP, I saw that the ROM's files were in both partitions, wiped the data and rebooted and returned to that same "unlocked boot loader" screen.
I've been stuck here for 3 days now, I want to go back to fastboot mode so I can push TWRP and restore my nandroid backup.
Anybody knows how I can do this?
Try holding power, volume up and down all at the same time without any cable plugged in to shut it down then while holding the volume up button plug the USB cable that's connected to your computer in. It should boot to bootloader screen.
DrAgNbOi said:
Try holding power, volume up and down all at the same time without any cable plugged in to shut it down then while holding the volume up button plug the USB cable that's connected to your computer in. It should boot to bootloader screen.
Click to expand...
Click to collapse
Thanks for your reply.
Thank you so much. I had'nt tried this specific combination. It worked.
ebab said:
Thanks for your reply.
Thank you so much. I had'nt tried this specific combination. It worked.
Click to expand...
Click to collapse
No worries. Glad it works as I was in the same situation before myself.
Well I'm grateful that I was able to get the device shut down without a hot dead battery. I wasn't able to get it into fastboot by the volume up and plug in. I'm thankful it's off. Do you have any other ideas Im not concerned about data at all. I just would like to get my device back up and running..
Please help me out! Thanks