Database Users

[Info] Guide to entering safe mode, bootloader, stock recovery

Yes, I know, everyone knows how to enter safe mode, bootloader, and recovery.
I found there are some inconsistencies to entering and using recovery depending on your which software you are running. In addition there are multiple ways of entering stock recovery.
Also I always see people asking this question because somehow the keypress order is not intuitive.
Entering Safe Mode
Tablet booted and running Android
Press/Hold Power button until power menu shows up
Tap/Hold Power off option
Choose OK to reboot in safe mode
Tablet powered down
Press/Hold Power button until Google screen shows up, RELEASE Power button
Press/Hold VolDn until Android has booted up
If successful, you will see Safe mode overlayed on bottom left of screen.
Entering Bootloader (ie fastboot mode)
Tablet booted and running Android
From adb
adb reboot bootloader
can also choose recovery from menu after bootloader comes up
From app
Use Quick Boot from Google Play
Tablet powered down
Power+VolDn while booting to enter bootloader
Release buttons after you see bootloader screen
Entering Stock Recovery
Tablet booted and running Android
From adb
adb reboot recovery
From app
Use Quick Boot from Google Play
Tablet powered down
Power+VolUp while booting to enter recovery
You can release buttons after you see Google on screen
When Stock Recovery starts you will see the Android fallen down screen
To bring up the Recovery menu
Power+VolUp to show recovery menu
Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power
Within menu
VolUp to move up
VolDn to move down
Power to select
In addition, I found an inconsistency with JSS15J stock recovery that wasn't in the JWR66N recovery
While at the Android fallen down screen if you mistakenly press
VolUp
instead of
Power+VolUp
you will still get the Recovery menu.
However, VolUp will no longer function. It will instead become a toggle for switching between the Recovery menu and the Android fallen down screen
Android fallen down screen
VolUp to toggle recovery menu
Within menu
VolUp does not work since it toggles recovery menu
VolDn to move down
Power to select

sfhub said:
Entering Stock Recovery
Tablet booted and running Android
From adb
adb reboot recovey
Click to expand...
Click to collapse
Are you sure with this command. I think it must be => adb reboot recovery <= or am I wrong ???

pRo_lama said:
Are you sure with this command. I think it must be => adb reboot recovery <= or am I wrong ???
Click to expand...
Click to collapse
Sorry, typo, fixed.

i`m on completely stock JSS15Q and i cant get into stock recovery. When im trying i see "no command" and red exclamation mark on the laying robot. What should i do?

laska300 said:
i`m on completely stock JSS15Q and i cant get into stock recovery. When im trying i see "no command" and red exclamation mark on the laying robot. What should i do?
Click to expand...
Click to collapse
sfhub said:
Entering Stock Recovery
Tablet powered down
Power+VolUp while booting to enter recovery
You can release buttons after you see Google on screen
When Stock Recovery starts you will see the Android fallen down screen
To bring up the Recovery menu
Power+VolUp to show recovery menu
Must be this sequence Press/Hold Power, THEN Press/Release VolUp, release Power
Within menu
VolUp to move up
VolDn to move down
Power to select
Click to expand...
Click to collapse
Please see RED section

Does the presence or absence of the red exclamation triangle mean anything?

Wot does safe mode do?

Anderson2 said:
Does the presence or absence of the red exclamation triangle mean anything?
Click to expand...
Click to collapse
I don't remember if there are two images one with and one without the triangle. I think I've only seen the image with the red exclamation point.
I've never seen anything to indicate the red exclamation mark is something you need to pay attention to.
Now if you apply an update and there is an error, then that is something I would pay attention to.

LoVeRice said:
Wot does safe mode do?
Click to expand...
Click to collapse
It doesn't load the stuff you added.
It is similar to safe mode on a PC, used to diagnose whether the issue is in the stock ROM or is in something you introduced by installing some app.

I Have a probleme
since a bought TAB 3 10.1 and it's boot into safe mode i'v restart it and turrn it off the back on but it didn't go what should i do ?

This thread is about nexus 7.

sfhub said:
This thread is about nexus 7.
Click to expand...
Click to collapse
oh sorry i was panic so i searched in every thing

Bootloader
If none of that works, try the command with a dash "adb reboot-bootloader" Depends on your device sometimes, sometimes unplugging your device right after you enter this command will keep it from getting stuck at the boot logo screen. If that doesn't work, hold the power button to power device down and then boot it into recovery instead using the button combo. Then you can wipe cache & start all over again.

I'm not even able to get into Recovery. I can get to the bootloader, then I select "Recovery mode" and it shows the Google logo, but it never goes into recovery. I have let it sit at the Google logo for a couple of hours, and end up just holding down the power button to shut it down.
I have tried Skipsofts toolkit, as well as Wug's, to try to unlock the bootloader. This ends up with the device hanging at the "Unlock bootloader" screen after selecting "Yes". Again, I have left it in this state for well over an hour with no change.
Here's some info on my 2013 Nexus 7:
KitKat 4.4.4
Never rooted
Never unlocked bootloader
HW version rev-e
Bootloader version FLO-04.02
I suspect my Nexus knew I was supposed to go on travel next week and is faking sick.
Any help would be appreciated. Thanks.

Hi guys i have a google nexus 5 and it is locked state. It is getting booted again and again but it jiust reaches google logo and again restarts. Safe boot is also enabled so i cant enter in recovery mode also. Please help me ASAP.

[Q]how to run TWRP recovery when Booting?

hi guys im totally new with G2,im with sony's device earlier.i have installed twrp recovery but the only way to run it is i have to install another apps like quick boot to run to recovery mode.when i was on sony's device i just simply press vol up button when sony's logo comes.another methods is simply tap sony's logo.but on LG G2 i can't do that.anyone know how to run to TWRP recovery when restarting the phone.this is really matter when we got stuck an bootloop or something went wrong and we need force restart and go to recovery.please help me

afrizal87 said:
hi guys im totally new with G2,im with sony's device earlier.i have installed twrp recovery but the only way to run it is i have to install another apps like quick boot to run to recovery mode.when i was on sony's device i just simply press vol up button when sony's logo comes.another methods is simply tap sony's logo.but on LG G2 i can't do that.anyone know how to run to TWRP recovery when restarting the phone.this is really matter when we got stuck an bootloop or something went wrong and we need force restart and go to recovery.please help me
Click to expand...
Click to collapse
You can get into TWRP by pressing and holding the power and volume down keys until the phone reboots, releasing them, then pressing and holding them again once the LG logo comes up. It's a little tricky and might take a couple of times to get the timing right. There will be a white screen that says "Factory hard reset" (which just means boot into recovery since the default recovery performs a factory reset). Press the power button 3 times to confirm and you'll enter TWRP.

Thanks for the info, haha Ive been using ROM manager to get me into recovery since I never knew how to get there using hardware buttons

You can also install GooManager from the Play Store. It has an option to reboot to recovery.

thank you soo much now i desire to custom my device hehee

I think I bricked my ZTE Blade C2 v809

Please help me. I am in a sort of panic right now.
I have a ZTE Blade C2 v809, sold here in Portugal as Meo Smart A12. It was rooted and working fine. I was however getting some error 24's trying to install apps. I thought this might have had to do with using Titanium Backup to remove TouchPal (I did make a backup first), so I decided to restore TouchPal. There were however some errors in the restore and it was stuck there, so I decided to reboot the phone.
Chaos. Now it wont boot. If I press the button normally, the phone boots, I see the android logo, the screen goes black (Not shutdown black, a sort of light black background) and nothing happens. If I try to boot into Recovery mode by holding the power button and the volume down key, I just get the android logo stuck there, nothing happens. If I hold the power button and the volume up key, I get the picture of that laying down android with the message error.
Any more info I must provide please tell me, I am desperate for a solution, If I lose this phone I wont be able to get another one.

Okay I fixed it. Turns out the recovery menu DID work if I waited for a long time and tapped the screen. Used the update.zip available from the site, and it works like a charm

Yay, I bricked my phone, too.
I did something similar, changed recovery-from-boot.p name to recovery-from-boot.p-bak and install-recovery.sh to install-recovery.sh-bak
Now the phone doesn't boot properly, in fact it's stuck in a boot loop:
>starts
>shows white ZTE logo on screen
>restarts
Tried connecting the phone via USB cable and used fastboot devices & adb devices commands, no devices found.
Also tried pressing "power + vol down" and "power + vol up", nothing. I can't enter recovery mode or bootloader.
Apparently the remaining way to get in it's trough the SD slot, or maybe there's another way.
I kindly ask for help, couldn't be possible that I ruined this cell phone so fast.
Ideas, somebody?

Zuk Z1 Soft Brick

Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.

triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?

Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!

hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.

rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?

crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx

Can y get to fastboot ?

im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/

CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!

Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now

Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help

Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.

Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme

Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail

errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.

Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all

Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)

rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.

keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....

how to stop boot loop ??????
can you provide videos how to stop boot loop ??????

Need help with bricked redmi 7a

so i need to somehow revive my redmi 7a from its grim state. Everything started with scuffed attempt at downloaded system update that resulted in a loop of turn on-update up to some %-freeze-repeat. when i tried to do something with it it resulted in total hard-lock. all my phone can do now is turn on greet me with a logo screen with android at the bottom then that same screen without the android logo and it stays there for indefinite amount of time. fastboot's not opening so does recovery mode, all that i can do is turn it on and stare at the logo screen. please somebody help

oeldeaf said:
fastboot's not opening so does recovery mode
Click to expand...
Click to collapse
does this mean you have tried the power-button + volume-up to enter recovery mode and the power-button + volume-down to enter fastboot-(bootloader-)mode?
i once had success with a bricked redmi by pressing the combinations for about 3 minutes until it managed to enter recovery mode. and make sure that your phone is completely full charged.
have you already tried the "Mi_Flash2020" application for Windows? here is the link: https://c.mi.com/in/miuidownload/detail?guide=2
rom files if needed: https://c.mi.com//miuidownload/detail?device=1900369
maybe the "miflash_unlock..." application could also help you. i think it uses fastboot but give it a try. here is the link: https://en.miui.com/unlock/download_en.html (if you have unlocked bootloader make sure you to uncheck the "lock device" option at the bottom)
more questions if you can't solve it:
is twrp installed?
was there an original miui rom intalled?
was it a ota update?