Hello,
I changed the screen on my Huawei P9, but the rear camera doesn't work. The application crashing (it opens, closes and restarts) and I cannot check if the front camera. works. I have already tried to reset the phone and completely drain the battery. Before changing the display it worked, so maybe I have damage it when I took it off my smartphone.
It's possible? What you think?
Should I replace the camera? Or can be a software issue?
Thanks!
Related
so... my 5MP back camera died today, 2 month after end of warranty... i get green blinking for 5 seconds then the app crashes... then 30secs later android reboots by itself.
i was wondering if there is anyway to disconnect that camera, either hardware or software fix, maybe rerouting android's requests to my front camera thats still working ?
would it be easy to pry open the tablet and remove the camera module ? maybe that would prevent the system from rebooting ?
not a major annoyance but that would prevent accidental reboots from apps that reset the default camera.
edit: nvm, found this post http://forum.xda-developers.com/showpost.php?p=25138666&postcount=3
and followed instructions camera fixed with a bit of tape
Hello everyone!
Since I replaced the broken rear camera of my GT-I9505 the camera doesn't focus properly. First I thought it was a faulty replacement, but the replacement of the replacement as well as the camera from a different seller show the same behaviour:
The google drive widget for scanning docs focusses correctly, but none of the available camera apps work. As soon as the app tries to focus the focus goes into near mode and remains there with no further movement.
I have factory reset the phone, reinstalled all camera apps, flashed other roms, factory reset again, with no change.
Has anyone experienced this as well?
Thanks for any tips
suxi
So little rear camera replacements? I guess I am the only fool that managed to crack it
suxi said:
Hello everyone!
Since I replaced the broken rear camera of my GT-I9505 the camera doesn't focus properly. First I thought it was a faulty replacement, but the replacement of the replacement as well as the camera from a different seller show the same behaviour:
The google drive widget for scanning docs focusses correctly, but none of the available camera apps work. As soon as the app tries to focus the focus goes into near mode and remains there with no further movement.
I have factory reset the phone, reinstalled all camera apps, flashed other roms, factory reset again, with no change.
Has anyone experienced this as well?
Thanks for any tips
suxi
Click to expand...
Click to collapse
Hello there
I also have this same problem and done all those same things to fix this. 12cam is now useless. Some1 help us out of our misery! :I
I just picked up the i9505 second hand (first smartphone). Same problem here. I went through 3 camera module parts off eBay... first one was the wrong part (i9500), and other two were supposedly i9505 - same results: camera never focuses. *Sometimes* it will temporarily focus if I moderately shake the phone, even then, only if the phone is tilted upright and not facing down.
Is the front camera unaffected for you guys?
suxi said:
Hello everyone!
Since I replaced the broken rear camera of my GT-I9505 the camera doesn't focus properly. First I thought it was a faulty replacement, but the replacement of the replacement as well as the camera from a different seller show the same behaviour:
The google drive widget for scanning docs focusses correctly, but none of the available camera apps work. As soon as the app tries to focus the focus goes into near mode and remains there with no further movement.
I have factory reset the phone, reinstalled all camera apps, flashed other roms, factory reset again, with no change.
Has anyone experienced this as well?
Thanks for any tips
suxi
Click to expand...
Click to collapse
Might camera hw problem
I successfully revived my phone after a brick - had to take it apart at that. I disconnected the camera module when doing so. After finishing and reassembling it, I noticed that the photos from the back camera were no more than 3 or 4 megapixels. i thought it was badly connected or something (which seemed odd since it still shot somewhat nice pictures, i would expect artifacts) and went ahead and took the device apart, then unplugged and replugged both cameras. After booting, I opened the default camera app. The rear camera snapped into place with OIS but the app didn't show image. Tried switching to the front cam, nothing. After some time it simply crashed. OpenCamera says it can't start it and it might be in use by other app (after closing the stock camera).
Now I connected it again after that and it still doesn't want to work. I might've damaged something, which is kinda unlikely since it worked worse, but still worked after the first teardown.
Maybe it is a software issue? There's some camera firmware I've heard of, might be that too. Or I just trashed the cam, possible too. But what's weird is that the front camera also doesn't work...
Edit: it was the BeastMode kernel... Says it is made for A2017U's and my thing is a G
Lol it was BeastMode Kernel. Thanks for all the help
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
jbstanford said:
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
Click to expand...
Click to collapse
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
IronRoo said:
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Click to expand...
Click to collapse
jbstanford said:
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
Click to expand...
Click to collapse
hummmm ... Yes, hard to say for sure boat seems like some hardware issue on the color camera, hope you can find a simple fix.
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
jbstanford said:
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
Click to expand...
Click to collapse
that would likely explain it, hope you fix it easily (see the video on youtube from Fixeze & ifixit if you haven't already
Hello friends,
I recently changed the display of Huawei p10 plus. Afterwards I found out flash not working.
Then I checked camera, and once I opened camera, the app crashed and disappeared.
I didnt power off the phone before disconnecting display ribbon.
Is this the reason my camera got short circuit and now not working?
Please help.
After I get some help, I will open the phone again to check out the problem.
Thank you all.