Does any one else have form time to time "the problem" with accidentally microphone during the phone call ?
OnePlus 8 Pro
Related
Hi there everyone.
I am a new user of an HTC Hero.
I have a problem on incoming calls or sms.
I leave the HTC to lock by itself and, when i have an incoming call or sms, only the screen turns on. I can see the number of the dialer who is calling me on the screen but NO ringtone sounds from the phone. The same problem occurs when an sms is received. No ring is sounded by the phone.
I have checked everything concerning the sound preferences and (i believe) that i have not left anything un-touched.
Can anyone please "save" me from madness???
Thanks in advance!
I can't say for sure this is what happened, but humor me for a second and check a few things:
Of course double check that your volume is all the way up.
When you use the volume rocker on the side of the phone, does it beep?
Do you have any music on it? If so, play it without the headphones plugged in. Do you hear the music?
When you turn speakerphone on during a call, do you hear the other person?
Do you hear any of these sounds using headphones? Do you hear people through the earpiece on a call?
If you don't hear any sound from any of the first few bullets, but you do hear things through the headphones and earpiece, it may be the speaker in the back that's broken. Again, this is just one possible cause, but I had it happen to me. I have no idea how to fix it other than to send it back to HTC or attempt to replace it yourself (I don't know how to do this and would not recommend it if you're not comfortable with it!). Thankfully, my phone fixed itself after a few days (well, with a little help, I accidentally dropped it on the floor from a height of about four feet, but again, I wouldn't recommend that!). Anyway, just a thought, hope it at least helps you diagnose the problem.
I find it quite strange that the phone does not allow to make outgoing calls when the keyboard is closed.
Because when you have an outgoing call you can still close the phone and the call will continue. That profs that it's possible. But with to much emission? If not...
Could there be some way overcome that that limitation?
The issue is that if you close the screen, the microphone is hidden.
Yep. The MIC is on the keyboard, which gets covered when you don't have the keyboard flipped out.
The issue is that it's even impossible to answer a call when the headset is connected.
Yesterday I was outside, it was windy and friend called. The headset was connected. I had the phone in my pocket and closed the phone while I was asking my friend if he might hear any differences in the quality of my voice.
He recognized no change in quality and we were able to talk just normally without problems. Does the headset has a microphone or is always the microphone of the phone used?
In any case, not being able to answer a call with headset connected without opening the phone is quite poor.
I would like to have an app to fix this behaviour. I don't like being patronized by Motorola.
PS: I just recognized that the headset has a single button for answer/hang up. Just the application for incoming calls does not have this feature which is still quite poor. Is the standard android (without motoblur) better?
Behind that 'single button' on the headset, there is a microphone. That's why if you have a headset(not to be confused with headphone), you can make a call w/o opening the phone.
However, as I've tested, even when the phone is closed, the MIC near the keyboard blocked by the phone's screen can still function normally(via Voice Search).
Hello. Sorry my English.
Hardware: Samsung Galaxy S5 Duos (KitKat 4.4.2 ANJ1 stock rooted), Plantronics Voyager Bluetooth Headset, Jabra Clear BT Headset. From november 2014 to may 2015 all was great, but suddenly I got a problem with the BT on my phone.
The problem is: in outcoming call: 1) I dial a number and begin a call 2) the call's sounds routed to a headset 3) When I hear "Allo" , the sound in headset suddenly goes to a phone's voice speakerphone, and BT-headset loses sound 4) sometimes sound and voice goes to phone while dialing a number or after some words from my friend that I called. The problem occurs completely at random, it can happen on the 1st time I dial or the 10th time, for example, or just every call. In incoming calls: 1) I receive a call with BT-Headset (push a button on it), firstly voice comes to BT-Headset, but it can disappears after some words from me or my friend.
When the sound disappears, I find that the BT-connection stays alive , and my S5 obeys the headset buttons commands (when I pressed the button on headset, the call disconnects. So, Galaxy S5 obeys the command from BT-Headset and BT connection stays alive while calling, but sound may disappears suddenly, and I must take my phone to the ear to complete a call. Both mic and voice sound goes from BT-headset to the phone's speakerphone. But I finde a feature: After sound disappears - when I double pressed the BT-button in the call window (off and on again bluetooth audio call channel), the sound brings back to the headset!!! So, I think, that the call app loses the sound from BT-Headset and suddenly routes it to the phone, but why?
I used a stock ANJ1 rooted for 6 month ago and had no problem, my apps setup didn't change for 6 month I owned a phone. Something happens, but what? How can I trace or parse the app that causes this problem? I think, one app from my setup trying to control the voice, so it disappears. Any suggestion?
What I tried: wipe phone and write the ANJ1 from Odin (BT works on the stock without apps), after this I bring back my backups from Titanium Backup (just user apps and data). I have Smart Booster and AFWall+ (android firewall - with my own rules), and have the EnhancedSMS and Caller ID. Freezes AFWall+ and SmartBooster - no changes, sound disappears. Any saggestions, please?
Hello all,
This is my first Huawei phone, I have enjoyed it, but there is one major problem at this point. Out of the box the "stereo" effect from the bottom speaker and upper (ear) speaker sounded great. I ran a couple updates and now I can barely hear the other person when I place calls and the "stereo" effect is essentially gone. I have to use the "speaker phone" function or use headphones otherwise its almost impossible to hear the person I'm calling. Yes, it is turned all the way up..... (in advance). I'm in Canada on Rogers Current Build #: VKY-L09C654B198.
Anyone else with this problem or is it just a lemon?
Thanks in advance.
As in the subject, after updating on JOYUI 11 while making or receiving calls after about a minute and sometimes five minutes (no exact time) the microphone stops working and my interlocutor cannot hear me. When the microphone was not working anymore, switching the call to the speaker also does nothing - my interlocutor cannot hear me anymore. The microphone icon indicates that the microphone is on. Pressing this icon indicates that the microphone is muted, and pressing it again indicates that the microphone is on, but the microphone still does not work. Then I have to disconnect my caller and make the call again. Sometimes the microphone works all the time during the call and does not turn off. I don't know what it depends on and what turns it off. I suspect that the proximity sensor may be responsible for turning off the microphone, because I noticed that when the phone is pressed to the ear with the entire surface, the problem with the microphone occurs very rarely, and when I touch the ear with the top edge, the problem occurs often. When I am talking on a cordless handset or a cable headset, the problem does not occur.
There is also no problem when I make or answer calls and switch the call to the speaker immediately.
In all other applications and device tests, the microphone works without problems.
I am asking for help in solving the problem because it is very annoying.
The device is: Xiaomi Black Shark 2 8 / 128GB
SKW-H0
JOYUI 11 20.04.22
SKYW2004221OS00 MQ0
I have sent an email to the developer and he replied that he will fix it in the next update.
https://forum.xda-developers.com/black-shark-2/how-to/skyw2006230os00mq1-released-t4132301
here is update