Related
All your actions with the phone is at your own risk. The authors are not liable. This is just your choice.
PLEASE read full instructions before you start.
RECOMMENDED ONLY FOR EXPERIENCED USERS.
This was tested ONLY on MEIZU MX4 and ONLY FIRMWARE 4.2.8.2A, ANY OTHER FIRMWARE/PHONE - YOU WILL RECEIVE BRICK PHONE.
(с)
ONLY FOR MEIZU MX4 AND ONLY FIRMWARE 4.2.8.2A. Don't use the that apk on Lollipop or your device will brick
Hello everyone, i changed chinese apk for unlock bootloader, and replaced chinese recovery, on TWRP 2 8.6.0 recovery.
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK - drive.google.com/open?id=0B_Gd_o_kBWgLNHFuZW5kMlFzV2s
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0.
Thanks for the great work!
At last we're getting closer to opening up our meizu phones.
Can the phone with this, unlocked bootloader flash "I" international roms from OTA?
How to relock?
ideosx5 said:
How to relock?
Click to expand...
Click to collapse
Reflash FLyme rom (with Flyme recovery, be carefull!)
Or flash stock uboot
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
1. Installed apk method unlock (this thread).
2. Downloaded 4.5.7 "I" firmware, extracted and created system.img using (linux):
$ sdat2img system.transfer.list system.new.dat system.img
for windows, see this guide from Meizufans.
3. Boot into fastboot mode (now unlocked) using "VOL -" + "POWER"
4. fastboot flash boot boot.img
WAIT
fastboot flash system system.img
WAIT
5.Reboot into recovery
6. Full wipe
7. Install super su
8. Reboot
VOILA - 4.5.7 "I"
Remember to block/deactivate system updates once system has booted for first time.
Is it possible for someone to upload recovery.img of TWRP please ? I'd like to try
---------- Post added at 10:16 AM ---------- Previous post was at 09:22 AM ----------
I got it, I'm fixing the splash screen dimensions ahah^^
---------- Post added at 11:03 AM ---------- Previous post was at 10:16 AM ----------
It was a little harder than I expected but it's here : http://www.mediafire.com/download/26b963db1k489db/new-recovery.img
Learnincurve said:
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
Click to expand...
Click to collapse
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
And this method works even on newest firmware, let's say 4.5.6i downgraded to 4.2.8i via 4.0.4i? Or is a easy variant of previous method, patched uboot by meizu remains after 4.5.6i upgrade if i understand, no matter if you downgrate to Kitkat?
update for TWRP : http://www.mediafire.com/download/f6a65ccpgrfaopw/TWRPr5.img
Changelog :
I corrected "Select storage" position, corrected some shifts on the main screen
zaurikk said:
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
Click to expand...
Click to collapse
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
itresw said:
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Click to expand...
Click to collapse
i think, mx4 ubuntu touch version, and standard china version, - internal partitions(storage) name - different, so you gives write an error.
isko01 said:
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Now it is impossible.
zaurikk said:
Now it is impossible.
Click to expand...
Click to collapse
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
isko01 said:
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
i tried on M2 note, i suppose it bricked.is it possible earlier condition working?i look up some unbrick videos, can repairs make my phone working?thanks.
No way to unbrick it, this is for MX4 not M2 Note !!! You'll need to change the motherboard, sorry
zaurikk said:
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
Click to expand...
Click to collapse
Thanks to all user's who making this for MX4. They are really engineers! I hope they will try for MX5.
Yes, the problem it is not official, and we cant get new update.
Why we don't write a email to Canynogen and tell them that we open the bootloader and put CM. But we want they make CM for MX4 and MX5, with new CM and updates?
Sent from my MX5 using Tapatalk
my meizu is bricked, ne response please help me
hi someone had tested this app already? is it surely gonna work??
and after i will unlock the bootloader i can instal any rom? like Mokee and CM12.1??
I'm trying to help a coworker that has a problem with his phone. As indicated, it's a Huawei Y625-U13.
The problem it has is that upon boot it gets stuck in the Huawei boot logo and doesn't get past that screen.
I had previously recovered it by installing the latest available ROM from the Huawei website but he installed an OTA upgrade and now it has the problem again.
And now I'm having an unexpected problem: I'm trying to install the same ROM (since, well, it's the latest available to download) but the recovery system doesn't let me install it over a newer build.
The ROM in the Huawei website is from 2015 and the OTA update is from 2017.
What can I do to force the install? Tried with both sdcard (putting the update in the "dload" folder) and ADB sideload methods, without success.
Hi I have same problem can you give ota firware
Sent from my HTC One using Tapatalk
---------- Post added at 11:12 PM ---------- Previous post was at 11:11 PM ----------
Hi I have same problem can you will give ota fireware
Sent from my HTC One using Tapatalk
i flashed mine with fastboot by extracting img from update.app
Hello everone! I am new here. Asus officially released an app to unlock bootloader for Asus max z010d. Now it seems Asus will no longer release an OTA update for this model So Asus want users can go for Custom ROMS.
I have already unblock bootloader but now i want root access, install TWRP recovery and custom rom.
So Please guys help me
Kingroot (Android version) didn't help me
Provide all files, drivers, and image for Asus max z010d cpu8939
Zenfone max SD 615 root Successful
::::::::::::::::::::::::::::::::::::::Root Guide for Zenfone Max Snapdragon 615:::::::::::::::::::::::::::::::::::::::
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
You must be on latest Marshmallow build 13.8.26.98
Fastboot Driver:: http://dlcdnet.asus.com/pub/ASUS/Ze...27.1989298661.1502195255-770807829.1502195255
SuperSu zip::: https://drive.google.com/file/d/0B-0qEY9zypslT1VBMTJvbkNydTA/view
TWRP::: https://drive.google.com/file/d/0B-0qEY9zypslSnNKaWpXVXo0dXM/view
KERNEL::: https://forum.xda-developers.com/zenfone2/general/kernel-reaper-t3468632
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::STEPS::::::::::::::::::::::::::::::::::::::::::::::::
FIRST: Unlock your bootloader of zenfone max CPU 8939
SECOND: Flash TWRP through fastboot
THIRD: flash SuperSu zip
MOST IMPORTANT PART :::: You must Flash Reaper kernel developed by ShadowReaper1 after Flashing SuperSu zip for successfull boot..... Kernel link is given above and also Clear dalvik cache and cache..
Proof video:::: https://www.youtube.com/watch?v=77TDOrntsMo
You have given wrong link of Video its my edit video not the specific video please correct it
and is tht kernel for 8916 not 8939 , will it case any issue
manishkpr11 said:
You have given wrong link of Video its my edit video not the specific video please correct it
and is tht kernel for 8916 not 8939 , will it case any issue
Click to expand...
Click to collapse
My mistake
and the kernel reaper darkness edition works fine in my phone no issue has been encountered.
Its been 3 days since I was using that kernel in my Zenfone max cpu 8939..
Any custom ROMs for sd615 variant? Help me
Check this video description box for download
---------- Post added at 04:24 PM ---------- Previous post was at 04:12 PM ----------
Which kernel u flashed cutom rom or stock rom there r 2 kernel in tht link, give me the same proper link u installed
manishkpr11 said:
Check this video description box for download
---------- Post added at 04:24 PM ---------- Previous post was at 04:12 PM ----------
Which kernel u flashed cutom rom or stock rom there r 2 kernel in tht link, give me the same proper link u installed
Click to expand...
Click to collapse
THIS ONE I have tried Stock rom 13.8.26.98 :::::: https://www.androidfilehost.com/?fid=673368273298957749
my phone is stuck on the asus logo
dbzraen said:
::::::::::::::::::::::::::::::::::::::Root Guide for Zenfone Max Snapdragon 615:::::::::::::::::::::::::::::::::::::::
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
You must be on latest Marshmallow build 13.8.26.98
Fastboot Driver:: http://dlcdnet.asus.com/pub/ASUS/Ze...27.1989298661.1502195255-770807829.1502195255
SuperSu zip::: https://drive.google.com/file/d/0B-0qEY9zypslT1VBMTJvbkNydTA/view
TWRP::: https://drive.google.com/file/d/0B-0qEY9zypslSnNKaWpXVXo0dXM/view
KERNEL::: https://forum.xda-developers.com/zenfone2/general/kernel-reaper-t3468632
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::STEPS::::::::::::::::::::::::::::::::::::::::::::::::
FIRST: Unlock your bootloader of zenfone max CPU 8939
SECOND: Flash TWRP through fastboot
THIRD: flash SuperSu zip
MOST IMPORTANT PART :::: You must Flash Reaper kernel developed by ShadowReaper1 after Flashing SuperSu zip for successfull boot..... Kernel link is given above and also Clear dalvik cache and cache..
Proof video:::: https://www.youtube.com/watch?v=77TDOrntsMo
Click to expand...
Click to collapse
i just followed your method .... i was successful in unlocking the bootloader , flashing twrp and rooting my device ....thank you so much for that..
but after that i tried installing resurrection remix rom .. it was installed successfully .. but i am stuck on the asus logo ...
i tried many times installing it ... still its the same ,,,,
i even tried to install the stock firmware , but through twrp it is not able to open it , some kind of error is displayed ..
and even the asus flash tool cant help this ....
please help me ... what should i do????
dbzraen said:
::::::::::::::::::::::::::::::::::::::Root Guide for Zenfone Max Snapdragon 615:::::::::::::::::::::::::::::::::::::::
Proof video:::: https://www.youtube.com/watch?v=77TDOrntsMo
Click to expand...
Click to collapse
This Video link not works
adrajvrm2012 said:
i just followed your method .... i was successful in unlocking the bootloader , flashing twrp and rooting my device ....thank you so much for that..
but after that i tried installing resurrection remix rom .. it was installed successfully .. but i am stuck on the asus logo ...
i tried many times installing it ... still its the same ,,,,
i even tried to install the stock firmware , but through twrp it is not able to open it , some kind of error is displayed ..
and even the asus flash tool cant help this ....
please help me ... what should i do????
Click to expand...
Click to collapse
Dude just flash with stock rom using service firmware with ASUS flash tool and after done with flash wait for atleast 15 mins .......BEfore flashing select YES for wipe data in ASUS Flash tool
::::::::::::links:::::::::::
Service firmware WW_ZC550KL_8939_V13.8.26. 98:::::: https://cloud.mail.ru/public/DSh6/xysKkg6yW
ASUS FlashTool v1.0.0.57-ATD-20170426 ::::::::: https://cloud.mail.ru/public/BjE7/vqUtVSq7y
And make sure fastboot drivers are installed
dbzraen said:
::::::::::::::::::::::::::::::::::::::Root Guide for Zenfone Max Snapdragon 615:::::::::::::::::::::::::::::::::::::::
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
You must be on latest Marshmallow build 13.8.26.98
Fastboot Driver:: http://dlcdnet.asus.com/pub/ASUS/Ze...27.1989298661.1502195255-770807829.1502195255
SuperSu zip::: https://drive.google.com/file/d/0B-0qEY9zypslT1VBMTJvbkNydTA/view
TWRP::: https://drive.google.com/file/d/0B-0qEY9zypslSnNKaWpXVXo0dXM/view
KERNEL::: https://forum.xda-developers.com/zenfone2/general/kernel-reaper-t3468632
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::STEPS::::::::::::::::::::::::::::::::::::::::::::::::
FIRST: Unlock your bootloader of zenfone max CPU 8939
SECOND: Flash TWRP through fastboot
THIRD: flash SuperSu zip
MOST IMPORTANT PART :::: You must Flash Reaper kernel developed by ShadowReaper1 after Flashing SuperSu zip for successfull boot..... Kernel link is given above and also Clear dalvik cache and cache..
Proof video:::: https://www.youtube.com/watch?v=77TDOrntsMo
Click to expand...
Click to collapse
wtf @ShadowReaper1 when did you made kernel for 8939???
---------- Post added at 01:44 PM ---------- Previous post was at 01:18 PM ----------
IM A DEVELOPER OF ZENFONE MAX
IF YOU GUYS ARE READY TO HELP AND CONTRIBUT WE WILL MAKE ROMS FOR SD 615
JOIN OUR TELEGRAM GROUP AND DONT BE MESSY ,, SHARE MAXIMUM
http://telegram.me/zenfonemaxdevelopment
how to flash stock recovery
how to flash stock rom using flash tools.....z010d my mobile is turn on and showing asus logo only plsss tell me thank u
ravi hly said:
how to flash stock rom using flash tools.....z010d my mobile is turn on and showing asus logo only plsss tell me thank u
Click to expand...
Click to collapse
Flash stock recovery using fastboot
And the flash stock rom using stock recovery
::::::::::::::::::::::::::LNK::::::::::::::::::::::::::
Stock recovery https://drive.google.com/file/d/0BzbhuPeg0I1BemRXWFc0MzJOdEE/view?usp=drivesdk
Fastboot command:::::: fastboot flash recovery (stockrecovery file name .img)
Failed to unlock your device.
Hey Guys,
I am on the latest build .98 . When I tried to use apk for unlocking I am getting error "Failed to Unlock your device, please try again." Any suggestion?
sam1243 said:
Hey Guys,
I am on the latest build .98 . When I tried to use apk for unlocking I am getting error "Failed to Unlock your device, please try again." Any suggestion?
Click to expand...
Click to collapse
Make sure you're connected to the internet while using the unlock tool.
jide1 said:
Make sure you're connected to the internet while using the unlock tool.
Click to expand...
Click to collapse
Thanks, I was connected to WIFI but the issue was solved after inserting sim and connecting to Mobile internet.
Now I am facing a new issue, even after successful flashing of TWRP recovery still stock recovery remains. Any comments?
sam1243 said:
Thanks, I was connected to WIFI but the issue was solved after inserting sim and connecting to Mobile internet.
Now I am facing a new issue, even after successful flashing of TWRP recovery still stock recovery remains. Any comments?
Click to expand...
Click to collapse
After flashing twrp, you should boot straight into twrp without allowing the device to boot into home screen at first boot.
jide1 said:
After flashing twrp, you should boot straight into twrp without allowing the device to boot into home screen at first boot.
Click to expand...
Click to collapse
I have tried that, but it stucks at the Asus logo. I have waited for 10 minutes then I have to do fastboot reboot.
sam1243 said:
I have tried that, but it stucks at the Asus logo. I have waited for 10 minutes then I have to do fastboot reboot.
Click to expand...
Click to collapse
Use the instructions here https://forum.xda-developers.com/showthread.php?t=3652518
TWRP provided in this thread did not work. I used recovery.img (https://doc-0c-8g-docs.googleusercontent.com/docs/securesc/6h1gj4u0352bh178vg9ce90sgfakudj0/nflmtubkvkqpfq4u6l0b58ina30cfaa9/1502899200000/05888804415672663760/00202497907955220170/0B10DIKafyFzDVmpXamotWkVtbUU?e=download)
Installed SuperSU and kernel provided after restart phone is not rooted. Am I missing something?
---------- Post added 17th August 2017 at 12:07 AM ---------- Previous post was 16th August 2017 at 11:24 PM ----------
jide1 said:
Use the instructions here https://forum.xda-developers.com/showthread.php?t=3652518
Click to expand...
Click to collapse
Thank you. Followed the instructions. Finally rooted
Has anyone tried or found any unofficial version of linageos os that works for this model?.
I have mine rooted, twrp, xposed, but I would really like to change the stock OS. Linage would be awesome.
https://forum.mantab.me/thread/9412/custom-rom-nougat-71-lenovo-phab-2-unofficial-lineage-os.xhtml
Ifound this. But model is different, may u try search on that site
dlsega said:
Has anyone tried or found any unofficial version of linageos os that works for this model?.
I have mine rooted, twrp, xposed, but I would really like to change the stock OS. Linage would be awesome.
Click to expand...
Click to collapse
broo could u write a thread or link how u rooted it? im looking on the rusian site
i have been unsucess full 5 time gave up hope (havent retried since 4 months)
i would love to ****ing rootthis phone and have leagos thing
btw found this also http://lenovo-forums.ru/topic/21441-lenovo-phab-2-исходный-код-ядра/
source code
sushil888 said:
https://forum.mantab.me/thread/9412/custom-rom-nougat-71-lenovo-phab-2-unofficial-lineage-os.xhtml
Ifound this. But model is different, may u try search on that site
Click to expand...
Click to collapse
i tried, but avast shows the site as a security risk. I supose you found something for the pb2-650M?
reggiexp said:
broo could u write a thread or link how u rooted it? im looking on the rusian site
i have been unsucess full 5 time gave up hope (havent retried since 4 months)
i would love to ****ing rootthis phone and have leagos thing
btw found this also http://lenovo-forums.ru/topic/21441-lenovo-phab-2-исходный-код-ядра/
source code
Click to expand...
Click to collapse
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Idlsega, i m bit Confused!!
U r pointing towards 650 Y model to reggie....
Looking for 650 m model custom rom?
Which is yr model ?
And reggie... Is using which model ??
sushil888 said:
Idlsega, i m bit Confused!!
U r pointing towards 650 Y model to reggie....
Looking for 650 m model custom rom?
Which is yr model ?
And reggie... Is using which model ??
Click to expand...
Click to collapse
M and Y are same? i mean i didnt find any difference. only different country same phone
---------- Post added at 08:45 PM ---------- Previous post was at 08:37 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:52 PM ---------- Previous post was at 08:45 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:53 PM ----------
dlsega said:
i followed this guide for rooting
https://forum.xda-developers.com/phab-2/how-to/how-to-root-phab-2-pb2-650y-t3524305
The only trouble I had was unlocking the bootloader, and this step wasn't mentioned it the guide. Before flashing the code to unlock bootloader, in the developer options, (in the phone) I didn't checked the OEM unlocking. After I checked it, flashed the unlock bootloader code successfully, the phone restored to factory, then flashed the TWRP. Just as it's described in the guide. The only difference I noticed is that dlto enter recovery mode after twrp is install you have to push at the same time vol down button + power button.
if after you have root and install twrp you want to install xposed framework, just look for the xposed installer for android 6 arm64 devices.
i used this one here.
http://dl-xda.xposed.info/framework/sdk23/arm64/
choose the newest file
Click to expand...
Click to collapse
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
reggiexp said:
M and Y are same? i mean i didnt find any difference. only different country same phone
---------- Post added at 08:45 PM ---------- Previous post was at 08:37 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:52 PM ---------- Previous post was at 08:45 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
---------- Post added at 08:53 PM ---------- Previous post was at 08:53 PM ----------
i tried that last time impossible to boot recovery even after flashing :/ its keepos booting stock recovery :/
Click to expand...
Click to collapse
They're pretty much the same, the difference is on the LTE bands, the M has works with more I think. (besides the retail region).
I had a similiar problem, and the issue was that the bootloader wasn't being unlocked flashing the commands. It turns out that the thing keeping the bootloader from unlocking was that little OEM UNLOCK check in the DEVELOPER OPTIONS. After I checked that one, tried again, and this time it worked, I first noticed it because the phone started wiping to a factory reset automatically. After that I just put it into fastboot mode, flashed TWRP. And done.
I don't know if this is the same issue you're having. But for me it was a little frustrating trying and trying without success, until I noticed that little detail and that was it.
At the moment I have it rooted with xposed working just fine. The only issue (don't know if it's only me), is when recording a video using 3rd party apps like instagram or snapchat, the audio is garbage, like some noise cancellation going wrong.
im sure i had that ticked but i guess not. will retry once i fix my xiaomi redmi note 3 who has a memory failure (same on my mom's phone redmi note 3) both crashed 2weeks apart from each other. they boot but as soon as u download 5apps thr phone bootloops... and now im trying to get mi flash to work but its been a long time and i can't figure it out... so now using this massive phone fr 3months its a good phone but damn that quad core is slow... and apps close way to quick on back ground. anyway i will try and root again some dag and install linea os.
reggiexp said:
im sure i had that ticked but i guess not. will retry once i fix my xiaomi redmi note 3 who has a memory failure (same on my mom's phone redmi note 3) both crashed 2weeks apart from each other. they boot but as soon as u download 5apps thr phone bootloops... and now im trying to get mi flash to work but its been a long time and i can't figure it out... so now using this massive phone fr 3months its a good phone but damn that quad core is slow... and apps close way to quick on back ground. anyway i will try and root again some dag and install linea os.
Click to expand...
Click to collapse
Did you manage to get lineage to run?
Sent from my Lenovo PB2-650Y using Tapatalk
frankbonatelli said:
Did you manage to get lineage to run?
Sent from my Lenovo PB2-650Y using Tapatalk
Click to expand...
Click to collapse
didn't even try.
it's my majn phone still so not really wanna mess with it. still to lazy to flash RR on my redmi note 3
frankbonatelli said:
Did you manage to get lineage to run?
Sent from my Lenovo PB2-650Y using Tapatalk
Click to expand...
Click to collapse
still not switch phone? any one got any updates on the roms??? like this forum is dead.././
Custom rom for lenovo pb2-650m
I request the developers to provide custom rom for lenovo pb2-650m.
subal kumar mahato01 said:
I request the developers to provide custom rom for lenovo pb2-650m.
Click to expand...
Click to collapse
it are the same phones anyway i just cant figur out the unlock and twrp flash
subal kumar mahato01 said:
I request the developers to provide custom rom for lenovo pb2-650m.
Click to expand...
Click to collapse
Were you able to find any custom rom for lenovo pb2-650m?
I have a new (to me) Axon 7 Mini. i hIve had an A7U from a couple of years.
This phone came via eBay, but w/o user PW from previous owner.
Using TulipTool I was able to unlock the Bootloader, wiping all previous User Data, but the Google FRP blocks re setup (it hasn't been 48 hours tho).
Meanwhile I was going to flash a new bootlaoader and ROM, but the EDL tool does not find the phone in FTM or EDL. Surprising since the TulipTool worked fine.
And when attempting to flash TWRP 7.1r1 via TulipTool Recovery just reboots to a blank acreen. Verity restores Stock Recovery after a reboot to system. Unfortunately there is no FactoryReset or Flash ROM choice in the Mi Stock Recovery.
Any ideas? Thanks.
To use EDL tool you need to remove the old driver (he works with TulipTool only), and install stock driver(It should install automatically).
bius88 said:
To use EDL tool you need to remove the old driver (he works with TulipTool only), and install stock driver(It should install automatically).
Click to expand...
Click to collapse
I removed and reinstalled all drivers and moved the EDL tool to C: root.
It now finds the ADB interface, but still receives no phone response in EDL or FTM. No message is seen on the phone asking for USB Debugging.
It has not yet been 48 hours since I removed all user data after unlocking the bootloader, so Google still has me locked out from completing registration, so we will see what happens by tomorrow.
I was hoping to flash a ROM and setthis up for my wife.
I successfully set the phone up as a new user, then Factory Reset which also restored the complete compliment of Android Recovery options. Now to (again) begin the EDL flashing experiments.
Any latest recomendations for Bootloader, ROM and Kernel?
amphi66 said:
I successfully set the phone up as a new user, then Factory Reset which also restored the complete compliment of Android Recovery options. Now to (again) begin the EDL flashing experiments.
Any latest recomendations for Bootloader, ROM and Kernel?
Click to expand...
Click to collapse
First you need read about Bootloader
---------- Post added at 09:35 AM ---------- Previous post was at 09:23 AM ----------
About Edl Tool using
bius88 said:
First you need read about Bootloader
---------- Post added at 09:35 AM ---------- Previous post was at 09:23 AM ----------
About Edl Tool using
Click to expand...
Click to collapse
Thanks. I have been working with the A2017U since Nov 2016 so am a bit familiar. I bought the B2017G as an experiment and am quite impressed with "little brother", so far.
EdIt: For kicks I tried "Check for Updates" and surprisingly received an OTA update from.6.0.1 B14 to 6.0.1 B21. That no sooner had installed when I was notified again that the B21 to 7.1.1 B12 update was available (glad to see ZTE is consistent with their confusing id scheme across the platforms) It also downloaded and installed w/o issue (a whopping 1.8 GB). We'll see where to go next.