I'm trying to help a coworker that has a problem with his phone. As indicated, it's a Huawei Y625-U13.
The problem it has is that upon boot it gets stuck in the Huawei boot logo and doesn't get past that screen.
I had previously recovered it by installing the latest available ROM from the Huawei website but he installed an OTA upgrade and now it has the problem again.
And now I'm having an unexpected problem: I'm trying to install the same ROM (since, well, it's the latest available to download) but the recovery system doesn't let me install it over a newer build.
The ROM in the Huawei website is from 2015 and the OTA update is from 2017.
What can I do to force the install? Tried with both sdcard (putting the update in the "dload" folder) and ADB sideload methods, without success.
Hi I have same problem can you give ota firware
Sent from my HTC One using Tapatalk
---------- Post added at 11:12 PM ---------- Previous post was at 11:11 PM ----------
Hi I have same problem can you will give ota fireware
Sent from my HTC One using Tapatalk
i flashed mine with fastboot by extracting img from update.app
Related
Hello!
So I've managed to get myself info a few technical difficulties. After wiping the entire phone (internal storage and system as well....), I installed the Viper ROM. After completing the install process without any problems, my phone boots directly to the bootloader menu every single time. I made sure that the firmware version was up to date before deleting the stock ROM (Reminder to next time: backup)
Bootloader screen info:
Software status: Modified
Unlocked
S-ON
I've tried with different ROM's (MaximusHD, Skydragon) with the same result every time. I can access both download and recovery mode. I installed SuperSu with the .zip file through TWRP, without luck. Wiping cache, factory reset and similar doesn't seem to do anything.
What do I do now? I bought the phone in Norway so my best guess is that I have the international model. All help is much appreciated
Anyong
Edit: This is the M9 and not M9+, could admin please move this thread to the right forum?
try this rom and post results
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
http://forum.xda-developers.com/one...c-one-m9-stock-backup-stock-recovery-t3190453
anyong! said:
Hello!
So I've managed to get myself info a few technical difficulties. After wiping the entire phone (internal storage and system as well....), I installed the Viper ROM. After completing the install process without any problems, my phone boots directly to the bootloader menu every single time. I made sure that the firmware version was up to date before deleting the stock ROM (Reminder to next time: backup)
Bootloader screen info:
Software status: Modified
Unlocked
S-ON
I've tried with different ROM's (MaximusHD, Skydragon) with the same result every time. I can access both download and recovery mode. I installed SuperSu with the .zip file through TWRP, without luck. Wiping cache, factory reset and similar doesn't seem to do anything.
What do I do now? I bought the phone in Norway so my best guess is that I have the international model. All help is much appreciated
Anyong
Edit: This is the M9 and not M9+, could admin please move this thread to the right forum?
Click to expand...
Click to collapse
Did you receive the OTA upgrade from HTC to install Marshmallow? Or did you try to upgrade it yourself?
If you're trying to install a Marshmallow custom Sense rom with an old firmware (2.x), then you will have to return to Lollipop and wait for official OTA as Marshmallow (Sense, not AOSP) needs your firmware to be upgraded. Or you can turn s-off and flash a 3.x firmware
elghandor said:
try this rom and post results
http://forum.xda-developers.com/one-m9/one-m9-general/rom-cleanslate-1-0-world-wide-edition-t3120017
---------- Post added at 10:00 AM ---------- Previous post was at 09:59 AM ----------
http://forum.xda-developers.com/one...c-one-m9-stock-backup-stock-recovery-t3190453
Click to expand...
Click to collapse
Thanks for responding. Downloaded this ROM:
"Europe Base 1.90.401.3 - CleanSlate 1.2.3
CleanSlate-europe-full-odexed-1.2.3.zip 1.97 GB"
Transfered to internal storage and flashed. Flashing process is done withing 5 seconds, but nothing happens. Attatched image of phone when finished.
Boots back into bootloader when rebooting the phone. Any suggestions?
gortys said:
Did you receive the OTA upgrade from HTC to install Marshmallow? Or did you try to upgrade it yourself?
If you're trying to install a Marshmallow custom Sense rom with an old firmware (2.x), then you will have to return to Lollipop and wait for official OTA as Marshmallow (Sense, not AOSP) needs your firmware to be upgraded. Or you can turn s-off and flash a 3.x firmware
Click to expand...
Click to collapse
To be honest, I'm not really sure. New to this game hehe. Any way to check this in TWRP? Thanks
hi guys
my HTC M9+ stock at the htc logo i can enter to recovery
my bootloader open.
i did root.
the phone stock and i cant get out from the logo screen.
maybe need to flash stuck rom where and how to do it please
thank you
1. which version of your m9+ ?
2. Since you can enter into recovery mode, try to reflash the ROM.zip if you have copied it in you internal storage before.
3. If you don't have any custom ROM or RUU in your storage, download and copy it to external SD card and flash it from external one.
http://forum.xda-developers.com/showpost.php?p=64574392&postcount=27
4. RUU (stock ROM)
http://forum.xda-developers.com/one-...-file-t3152206
http://forum.xda-developers.com/show...34&postcount=8
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
---------- Post added at 11:54 AM ---------- Previous post was at 11:50 AM ----------
hi, did you flash the new systemless SuperSU to root and then stuck on hTC logo?
If so,just reflash your stock boot image from recovery.
thank you sir
yvtc75 said:
1. which version of your m9+ ?
2. Since you can enter into recovery mode, try to reflash the ROM.zip if you have copied it in you internal storage before.
3. If you don't have any custom ROM or RUU in your storage, download and copy it to external SD card and flash it from external one.
http://forum.xda-developers.com/showpost.php?p=64574392&postcount=27
4. RUU (stock ROM)
http://forum.xda-developers.com/one-...-file-t3152206
http://forum.xda-developers.com/show...34&postcount=8
http://forum.xda-developers.com/one-m9/one-m9-general/ruu-htc-one-m9-1-85-401-6-t3218717
---------- Post added at 11:54 AM ---------- Previous post was at 11:50 AM ----------
hi, did you flash the new systemless SuperSU to root and then stuck on hTC logo?
If so,just reflash your stock boot image from recovery.
Click to expand...
Click to collapse
i did it and its work like a charm
Owners of the factory-unlocked, dual SIM Snapdragon variant labelled as 'a5_dug' in the bootloader mode, will be pleased to know that the update is now available from your stock Lollipop ROM.
Before you begin
Preparation
If you are not using the official update tool, and wish to use OTA files uploaded here, reboot your phone in to its bootloader, and ensure that a5_dug is displayed. This update may not apply to other models, regardless of whether they are dual SIM or not. It most certainly will not apply to the 816G model which uses a MediaTek chipset.
You must ensure that you have 2GB free on the internal eMMC storage before continuing if you wish to update using the stock update tool. The update tool does not download to the microSD card.
The update does not update, unfortunately, the HTC Sense user interface. It uses the same Sense version as Lollipop did, with some minor changes.
Update contents, simplified
Android 6.0.0
HTC Sense 6.0
Additional Google features
Installation
For phones running a stock ROM earlier than Lollipop 5.0.2
Please update your phone to 5.0.2 and proceed to follow the instructions below if you wish to update through the official update tool.
For phones running stock Lollipop 5.0.2
The update is in two parts for phones running stock Lollipop 5.0.2. The first part is less than 60MB (typically), and prepares the phone for the installation of the second, main part, which is around 1.1GB.
Open the 'Settings' app.
Scroll down and select 'About'.
Tap 'System update'
Agree to download the update by pressing 'OK'.
Once downloaded, 'System update downloaded' appears in the notification tray.
Tap this, and tap 'Install'.
Then repeat for the second part.
For phones running custom software
(investigating)
I just got HTC Mail update only!!!
The update could be available around 01 - 02 week, hope so
@gwhite5 seriously!??? No Sense 7 ?!!!
Its great news but plz provide me with the marshmallow ROM for dual sim models with root capabilities! ? thanks in advance
Any news about the a5_dwg models ?
I have A5 Dug (816w).
After OTA update I have Android 6 with Sense 7, not Sense 6...
For devices on custom recovery
I am running official ROM but on custom recovery TWRP and rooted. My question is will this update will be installable on this setup?( Haven't tried yet)
Also I tried rolling back to stock recovery but I have removed few system app in past without backup is there any way to get the apks for them . I got error for HTC Car app . Also will need help on how to install it as a system app, cuz its not avaialble on "/system/priv-app/Automotive_Home/Automotive_Home.apk" .
Any help is appriciated.
TIA
I finally managed to reinstall the automotive_home.apk as system app, i moved back to stock recovery and then tried the OTA update once again still getting the same error " unexpected content" on that path.
could someone please make a twrp backup of the android 6 on the a5_dug ?
@mshtob its already done bro check updates we are still waiting for a5_dwg
pratik14994 said:
@mshtob its already done bro check updates we are still waiting for a5_dwg
Click to expand...
Click to collapse
No sorry I meant a twrp backup because I have twrp and cyanogen mod I was hoping someone could have a twrp backup of stock marshmallow rom so I can restore it
I have A5_DUG (CID: HTC__622 / Asia_HK) and I didn't get the update yet...
Is it because it's rooted with many changes? I didn't have this problem with the previous update so is it just not released yet for my CID?
EDIT: I noticed that version-main is blank in the bootloader
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
THE_MOJTABA said:
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
Click to expand...
Click to collapse
you can use this MM backup
http://forum.xda-developers.com/desire-816/general/twrp-backup-htc-desire-816-a5dug-dual-t3336060
Extract recovery from the OTA file.
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
THE_MOJTABA said:
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
Click to expand...
Click to collapse
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
need lolipop recovery guys
Tnx for your help
kyyubikiller said:
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
Click to expand...
Click to collapse
I used recovery from "firmware.zip" file but did'nt work..after setup and reastart, my phone stoped on whit screen whit htc logo...i dont now what can i do anymore.
---------- Post added at 02:11 AM ---------- Previous post was at 02:06 AM ----------
Roberto Nigel said:
you can use this MM backup
http://forum.xda-developers.com/desire-816/general/twrp-backup-htc-desire-816-a5dug-dual-t3336060
Click to expand...
Click to collapse
Tnx but this backup did'nt work too
THE_MOJTABA said:
I used recovery from "firmware.zip" file but did'nt work..after setup and reastart, my phone stoped on whit screen whit htc logo...i dont now what can i do anymore.
---------- Post added at 02:11 AM ---------- Previous post was at 02:06 AM ----------
Tnx but this backup did'nt work too
Click to expand...
Click to collapse
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Roberto Nigel said:
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Click to expand...
Click to collapse
yes im sure my phone is a5_dug.
when i want to extract this back up, i see an error in end of extract process (99%). but the files will be extract correctly,apparently
i copied files to sd card and done full wipe, i restore this back up..but the process was ok until 60%, but suddenly the process will be 100% and writes successful and done. but after restart my phone stop in white screen with htc logo!
i repair the .zip back up but it dose not change.
i think the .zip file is broken-down.. i downloaded it with download manager.
Roberto Nigel said:
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Click to expand...
Click to collapse
fixed.. tnx a lot
the downloaded file was destroyed.
Hello all,
I have flashed my p9 lite (VNS-L31C432B390) to the newest B390 firmware using official update routine and therefore flashing stock recovery via fastboot before updating. Now I wanted to reflash TWRP in order to get root back (I had done this before with B380 and B388 update, never having issues), but when I try the flash command in fastboot it says "FAILED (remote: Command not allowed)"
After some research, I found that this normally indicates a locked bootloader, but both on the screen of the phone (when in bootloader) and via fastboot (fastboot oem get-bootinfo) bootloader is shown as unlocked.
I just can't figure out what may have caused flashing not to work anymore... Anyone with similar issues after latest update?
EDIT: The solutionwas to re-unlock the bootloader (just perform "fastboot oem unlock PERSONAL UNLOCK KEY). Thanks to AndreaEl for suggesting the solution.
i have had the same problem some days ago.
Re unlock bootloader and try again
Thank you very much, I'm definetly gonna try, although I really hoped to spare me this factory reset
opal06 said:
Hello all,
I have flashed my p9 lite (VNS-L31C432B390) to the newest B390 firmware using official update routine and therefore flashing stock recovery via fastboot before updating. Now I wanted to reflash TWRP in order to get root back (I had done this before with B380 and B388 update, never having issues), but when I try the flash command in fastboot it says "FAILED (remote: Command not allowed)"
After some research, I found that this normally indicates a locked bootloader, but both on the screen of the phone (when in bootloader) and via fastboot (fastboot oem get-bootinfo) bootloader is shown as unlocked.
I just can't figure out what may have caused flashing not to work anymore... Anyone with similar issues after latest update?
Click to expand...
Click to collapse
Hi, could u please give a step by step guide on how to get to B390? I'm currently in B381.
---------- Post added at 01:36 AM ---------- Previous post was at 01:31 AM ----------
opal06 said:
Thank you very much, I'm definetly gonna try, although I really hoped to spare me this factory reset
Click to expand...
Click to collapse
Have u tried using the method on this thread?
https://forum.xda-developers.com/hu...ution-bl-unlockedfrp-locked-fastboot-t3684302
Neo Markson said:
Hi, could u please give a step by step guide on how to get to B390? I'm currently in B381.
---------- Post added at 01:36 AM ---------- Previous post was at 01:31 AM ----------
B160 -> B370(TWRP) -> B390(Firmare finder DNS method)
i have do like this
Click to expand...
Click to collapse
Re-unlocking the bootloader did the job for me... Afterwords I was able to flash TWRP again over fastboot... So this can be considered as solved...
As for my update method, I found the easiest way is to get official OTAs (I've got the B390 as official OTA, maybe not yet available in your region) by temporarely switch back to official recovery. As this thread shows, there may be minor problems and root will be lost after update. As always, you are performing these steps at your own risk. These are the steps:
- get an official recovery image from an official Huawei firmware (search here on the forums). Unzip it and use Huawei Extractor to extract recovery.img from update.app
- Flash it in fastboot mode (fastboot flash recovery /Path/to/recovery.img)
- Download update via Huawei's software update application
- Let it perform the OTA. This step is likely gonna fail, no problem though, just reboot.
- Software Updater will state that the update failed and start to download the full firmware package, which is way bigger (~2GB). Update with this one will work though...
- Performing the update will unroot, just flash latest TWRP and SuperSu like shown in many guides on this forum to regain it
AndreaEl said:
Neo Markson said:
Hi, could u please give a step by step guide on how to get to B390? I'm currently in B381.
---------- Post added at 01:36 AM ---------- Previous post was at 01:31 AM ----------
B160 -> B370(TWRP) -> B390(Firmare finder DNS method)
i have do like this
Click to expand...
Click to collapse
Tried that, it doesn't work. And I'm at B381 by the way. See when I try to send the firmware update to the updater app and install it, nothing changes. The installation completes and after reboot, when I check from about phone I see that I'm still in B381(at least according to it )
---------- Post added at 12:39 AM ---------- Previous post was at 12:32 AM ----------
opal06 said:
Re-unlocking the bootloader did the job for me... Afterwords I was able to flash TWRP again over fastboot... So this can be considered as solved...
As for my update method, I found the easiest way is to get official OTAs (I've got the B390 as official OTA, maybe not yet available in your region) by temporarely switch back to official recovery. As this thread shows, there may be minor problems and root will be lost after update. As always, you are performing these steps at your own risk. These are the steps:
- get an official recovery image from an official Huawei firmware (search here on the forums). Unzip it and use Huawei Extractor to extract recovery.img from update.app
- Flash it in fastboot mode (fastboot flash recovery /Path/to/recovery.img)
- Download update via Huawei's software update application
- Let it perform the OTA. This step is likely gonna fail, no problem though, just reboot.
- Software Updater will state that the update failed and start to download the full firmware package, which is way bigger (~2GB). Update with this one will work though...
- Performing the update will unroot, just flash latest TWRP and SuperSu like shown in many guides on this forum to regain it
Click to expand...
Click to collapse
My boatloader is already locked and I'm not rooted.
Click to expand...
Click to collapse
First of all, I'm a newbie when it comes to rooting and all this stuff.
I have spent the last few days scouring XDA and the rest of the web, but I am coming up empty.
I bought this Galaxy tab 4 for my brother. It was new but rooted with SU installed. He unrooted it and then decided he didn't like it that way, so he tried to reroot it and now it bootloops in TWRP recovery mode and says no OS installed.
My TWRP is version 2.8.0.1 and I tried to update to the newest version by flashing 3.2.3.0 img.
I can't get TWRP 2.8.0.1 to recognize .img or zip files.
I got my computer to recognize the device and pasted the .img file to the root of internal storage and still couldn't find it through recovery.
And from what I understand you shouldn't try to install a rom with an outdated TWRP, even if I could get it to recognize zip files.
I'm not sure what to do now. I'm really hoping someone can help me figure this out.
Thank you for your time
This happened to me on my SM-T230, all I did is I searched for a FirmWare then I installed it using odin
https://androidfilehost.com/?fid=817550096634801095
This one is for SM-T230NU, try it, it might fix your problem
---------- Post added at 07:23 PM ---------- Previous post was at 07:23 PM ----------
This happened to me on my SM-T230, all I did is I searched for a FirmWare then I installed it using odin
https://androidfilehost.com/?fid=817550096634801095
This one is for SM-T230NU, try it, it might fix your problem