Related
I successfully upgraded my Mate 8 to nougat. Then I tried to root the phone. In the middle of flashing superSu, my phone suddenly rebooted and stuck on the bootloop. It never booted again. I tried searching for all the possibilities to unbrick it, but no hope. My mate 8 is bootloader-unlocked. My phone won't boot to trwp even I tried to fashboot flash the it. I really need help from the experts. Thank you all in advance.
I accidentally posted on the wrong subf-forum, please move this post over to the Q&A troubleshooting . thanks you
1.Turn off the phone
2.Connect pc usb cable
3.Hold power+vol down
u should see rescue bootloader page,
now u can flash twrp recovery (for emui5 of course) then u can boot into twrp and do the firmware flashing again
Sent from my HUAWEI NXT-L29 using Tapatalk
amin318 said:
1.Turn off the phone
2.Connect pc usb cable
3.Hold power+vol down
u should see rescue bootloader page,
now u can flash twrp recovery (for emui5 of course) then u can boot into twrp and do the firmware flashing again
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Do Exatly what he said
I did flash the 3.0.2.0-next twrp My phone won't boot to TWRP mode. I don't know if I should flash the stock nougat recovery.img and then flash the twrp.img ?
Was the 3.0.2.0-next right for the nougat ? thanks
After trying to flash twrp many times, the screen is always on " your device is booting now .. "
Did u tried frd-twrp for emui5?
https://mega.nz/#!xg8lVBgJ!4v0DbY-QLGtQVnYvTkTtIXRBmx5q-ZoJp90PSMqlh-U
If it didn't worked try to dload ur last emui4.x via SD card, sometimes it work
Sent from my HUAWEI NXT-L29 using Tapatalk
anthony.ha92 said:
I did flash the 3.0.2.0-next twrp My phone won't boot to TWRP mode. I don't know if I should flash the stock nougat recovery.img and then flash the twrp.img ?
Was the 3.0.2.0-next right for the nougat ? thanks
After trying to flash twrp many times, the screen is always on " your device is booting now .. "
Click to expand...
Click to collapse
If you downloaded from the official TWRP app. It can't be use. You need twrp Nougat that given by @amin318
I successfully unbricked my Mate. It is fully working again. Thank you guys for the help. I really appreciate it.
Flash twrp, flash both update zip and hw_data side by side, reboot to recovery to do a factory reset and then system reboot wait few minutes and then boom, working Mate 8 again.
oh and one more question, im currently on the official beta b521, I found the b563 via the firmware finder.
There are 2 files, one OTA for 400mb, and the other OTA for 1.3 gb. which one should I download in order to upgrade to B563 ? And do I do it by the dload method ?
anthony.ha92 said:
I successfully unbricked my Mate. It is fully working again. Thank you guys for the help. I really appreciate it.
Flash twrp, flash both update zip and hw_data side by side, reboot to recovery to do a factory reset and then system reboot wait few minutes and then boom, working Mate 8 again.
oh and one more question, im currently on the official beta b521, I found the b563 via the firmware finder.
There are 2 files, one OTA for 400mb, and the other OTA for 1.3 gb. which one should I download in order to upgrade to B563 ? And do I do it by the dload method ?
Click to expand...
Click to collapse
Just get the 1.3gb and push it to system updater.
HELP
I need your help¡¡ I have the same error , can you explain that :Flash twrp, flash both update zip and hw_data side by side. tks
Hello fellows. I am in a deep sh&*. Maybe someone can help.
I have a p10+ L09 converted to L29, rooted, bootloader unlocked. It was on rooted stock rom. Yesterday, tried to make the update, and something went wrong. Now, I can't install any rom exept future rom or something found here. I've tried rayglobe knife, Huawei multi tool, eRecovery, dload, and no way to install an official rom. I am barely able to install twrp, format data, and install future rom before rebooting.
Tried to extract boot, cust, system from the original rom, but it says finished and bootloop just after the unlocked message. On latest versions, I cant even find them in the update.app..
Any help, any downloadable file or link is really appreciated. Please help...
dj_varizes said:
Hello fellows. I am in a deep sh&*. Maybe someone can help.
I have a p10+ L09 converted to L29, rooted, bootloader unlocked. It was on rooted stock rom. Yesterday, tried to make the update, and something went wrong. Now, I can't install any rom exept future rom or something found here. I've tried rayglobe knife, Huawei multi tool, eRecovery, dload, and no way to install an official rom. I am barely able to install twrp, format data, and install future rom before rebooting.
Tried to extract boot, cust, system from the original rom, but it says finished and bootloop just after the unlocked message. On latest versions, I cant even find them in the update.app..
Any help, any downloadable file or link is really appreciated. Please help...
Click to expand...
Click to collapse
What error/behaviour are you getting from erecovery?
Plop
Hello mate. Thanks for your time.
ERecovery crash everytime at 5%. If I try to download via erecovery, it doesn't download.
I've tried to extract the files from update. App, and inject them via fastboot. It goes to the end of the operation, but once rebooted, it bootloop before the Huawei logo..
I don't understand what happens.. It's like if the phone don't want the original firmware anymore..
If you have any files to propose me, I really want to try tonight...
Can you somehow recover your original oeminfo with TWRP and retry erecovery? That's how I got out of a similar situation, although I can't say for sure whether I really had the same root cause.
Hmm not sure that the oem info is ok or corrupted...
That's what I am affraid of..
I will try in a moment to see..
If it's corrupted, that means the phone is dead?
In that case you could try funkyhuawei, they provide their own oeminfo and erecovery connection. They do cost money though.
May I ask what makes you want to go away from the fromfuture ROM?
This... Android 5.1, emui 3.1
I don't know if iam becoming stupid with age, but can't find any more recent... And with the kids yelling on my back.... Lol
Well, I found a recent rom from future. Had some troubles with Android locking magisk, but now it's working ( update magisk before putting your Gmail account and restore). For now it's working fine. Just had a few freezes here and there but since this morning it's going fine. I think I'll stay with it for now.
Thanks for the people who tried to help me.
XDa rules!
i am trying to update to b380 ( now 370)
bur every time it fails if got magisk root and twrp 3.1.1-0
i tryed firmware finder but stil fails with twrp
does i do something wrong?? i already tryed with deleting root
bakkertjuh said:
i am trying to update to b380 ( now 370)
bur every time it fails if got magisk root and twrp 3.1.1-0
i tryed firmware finder but stil fails with twrp
does i do something wrong?? i already tryed with deleting root
Click to expand...
Click to collapse
Hello
it's easy to understand.
huawei needs the recovery stock to install.
so, just delete twrp.
To do it just with adb and fastboot, flash recovery.img of your version.
** control / fastboot flash recovery RECOVERY.img
now, download your ota update.
he will install it.
or you can find recovery stock, In the update.app (open with huawei extrator), recover the file you wanted.
here is
huawei extrator https://forum.xda-developers.com/showthread.php?t=2433454
Chisetdel31260 said:
Hello
it's easy to understand.
huawei needs the recovery stock to install.
so, just delete twrp.
To do it just with adb and fastboot, flash recovery.img of your version.
** control / fastboot flash recovery RECOVERY.img
now, download your ota update.
he will install it.
or you can find recovery stock, In the update.app (open with huawei extrator), recover the file you wanted.
here is
huawei extrator https://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
Ok I will try this tomorrow and let you know
ive got error failed to check the update files please download the package agian
ive tryed 3 times now still te same
i will try full ota now with firmware finder
bakkertjuh said:
ive got error failed to check the update files please download the package agian
ive tryed 3 times now still te same
i will try full ota now with firmware finder
Click to expand...
Click to collapse
Hello
tell us right away the phone version you have?
it's easier to help you?
ex, I am p9 lite VNS-L31c432b394,
so you are vns-l ?? c ??? B ???.
Maybe there is an easier and faster way to get your phone up.
personally, I have never used FF to install, except to download the firmware.
L31c432b370 but after trying b380 full did get an error after 60% .. i rebooted the phone and i have b380 then i received ota message saying b388 is available so I tried to install that and it worked completely so i don't know why it did not updated from 370 to 380 normally but its ok now thanks for the help
bakkertjuh said:
L31c432b370 but after trying b380 full did get an error after 60% .. i rebooted the phone and i have b380 then i received ota message saying b388 is available so I tried to install that and it worked completely so i don't know why it did not updated from 370 to 380 normally but its ok now thanks for the help
Click to expand...
Click to collapse
have you tested the update with HiSuite?
just connect the phone to the pc, hisuite turns on, and press click on update system.
For me, it works, b160 he offers me b370 and then b380.
Yeah same problems with hisuite then.. I even have tried dload still errors then
bakkertjuh said:
Yeah same problems with hisuite then.. I even have tried dload still errors then
Click to expand...
Click to collapse
I said my last words with you.
I still have a solution.
I will put the firmware vns-l31c432b394 the latest on my google drive.
Like, you could install twrp and the root.
I suppose you knew how to return to MM (c432b160). ok for you.
so,
since, vns-l31c432b160, bootloader code, install twrp for MM, went to wipe, check all except SD card and wipe to wipe. back, back, go to install, install update.zip and install the data full l31.zip.
reboot.
There you go.
problem will be a little longt, it takes time to send it in google-drive.
he tells me 8am so tomorrow I give you the google-drive link.
vns-l31c432b394 full-ota-mf-pv https://drive.google.com/open?id=1UG7Q9HubCRZ2Qo-tQRoEpxikeF9eJBwo
I folowed this tutorial https://forum.xda-developers.com/nova-plus/development/rom-aospextended-v4-6-t3717372 and all flashing was fine. Due to some inconveniences of this new flashed rom i decided to restore to default rom. I extracted recovery and update.app version Can-L11 B396 i think from firmware finder and flased with adb this recovery. After that, it asked me to do an factory reset, i did it, but it wont boot any of huawei or Aosp Extended. The main problem i have is i can`t acces any more my phone with adb terminal, maybe after flashing the new original recovery usb debbuging reverted to un-enabled. How can I do now? Thanks in advance.
campeadore said:
I folowed this tutorial https://forum.xda-developers.com/nova-plus/development/rom-aospextended-v4-6-t3717372 and all flashing was fine. Due to some inconveniences of this new flashed rom i decided to restore to default rom. I extracted recovery and update.app version Can-L11 B396 i think from firmware finder and flased with adb this recovery. After that, it asked me to do an factory reset, i did it, but it wont boot any of huawei or Aosp Extended. The main problem i have is i can`t acces any more my phone with adb terminal, maybe after flashing the new original recovery usb debbuging reverted to un-enabled. How can I do now? Thanks in advance.
Click to expand...
Click to collapse
Check this post.
I cant access my phone via adb or twrp recovery. I wonder why. Before flashing a stock recovery all Was fine, adb Was connecting with no problem.
campeadore said:
I cant access my phone via adb or twrp recovery. I wonder why. Before flashing a stock recovery all Was fine, adb Was connecting with no problem.
Click to expand...
Click to collapse
Try to flash the TWRP again with fastboot.
PS: I don't understand how you people end up like this. It never happened to me.
I cant, adb cant be connected to device. Says null operation.
finally i succeed to revert o stock rom. Now i have on About phone CAN-L11C432B397, Emui 5.0 and Android 7.0. One question please, I dont see anymore the Update system tab or something, "Actualizator" on romanian language. Is that normal? How i can check for updates?
campeadore said:
finally i succeed to revert o stock rom. Now i have on About phone CAN-L11C432B397, Emui 5.0 and Android 7.0. One question please, I dont see anymore the Update system tab or something, "Actualizator" on romanian language. Is that normal? How i can check for updates?
Click to expand...
Click to collapse
You need to install the other zip too which has the word "data_full" at zip's name or something like that.
EDIT: @campeadore, i suggest you to edit the thread name and add "[SOLVED]" at begin and write the way you've fixed your phone (the solution), so it'll help other people who might run into the same problem as you.
I`ll do it as soon i fully resolve the problem. I followed your link and everything went fine at step 1 (Go back to EMUI 4.1 (MM). System is booting, but system update is not working. So, i want to flash EMUI 5, but can-l11c432b330 or can-l11c432b396 cant be updated, around 45% gives an error. The only version who work is can-l11c432b320 but i dont have update_full_CAN-L11_hw_eu, only the first update.zip.
campeadore said:
I`ll do it as soon i fully resolve the problem. I followed your link and everything went fine at step 1 (Go back to EMUI 4.1 (MM). System is booting, but system update is not working. So, i want to flash EMUI 5, but can-l11c432b330 or can-l11c432b396 cant be updated, around 45% gives an error. The only version who work is can-l11c432b320 but i dont have update_full_CAN-L11_hw_eu, only the first update.zip.
Click to expand...
Click to collapse
Newer / newest firmware downloaded from Firmware Finder needs to be approved by Huawei and that can take some time. It's failing to install because it wasn't approved. I've read this in past somewhere.
Try B381 or B382 as i've always installed that one when i've went back to EMUI 5.
Yes, i did it now with can-l11c432b330. I think my mistake was trying to flash to EMUI5 with usb cable connected. With cable off all went fine like a charm. Now i do all approved updates with system update. Thank you so much man, really appreciated.
Seeking help: I have a smartphone huawei nova lite plus (TRT LX1) that fails to restart. It goes continuously in a loop. Entering recovery only the first 2 functions come out: wipe wash factory reset and wipe wash partition. Then using eRecovery from PC with the USB cable, proceed up to a certain point and then not continue. I think it's in soft brick. I definitely need the right software for flashing, stock roms and usb drivers. Where can I find them? Many thanks
So I loved this phone long time ago, but after I got a new one, I decided to play with P9 Lite. I installed installed lineage, I had fun for a while, but I decided I want the stock soft once again. During 'rollback', something has happened and possibly bricked the phone. I forgot about it because I had some things to do in life, but now I came back to fix it...but I don't know how. It is still on a bootloop, but I can launch fastboot. I flashed some of twrp's out there, but I still cannot enter any of them. I can't use dload method, because it doesn't work either. Can anyone help me, please?
Try to go into the stock recovery , and if is possible do a cache wipe. Check if the bootloader is locked or not ( because after some operations it may be locked again ) and then try to flash a recovery in recovery and also in the Erecovery partitions.
i have same situation, flashed a lot of twrp, still cant enter none
Return back stock recoveries. I really don't think that TWRP will help you now. With stock recoveries reinstalled, try to flash B160/B161 (depending on if you have dual/single SIM) (you can choose pretty much any stock A6 version, but I think that B160/B161 is the best of all.). After a successful flash, a factory reset should start.. I think that you don't even need an unlocked bootloader or FRP.
NEVER EVER flash the rollback package two times in a row. And also, DO NOT flash Android 7 (B3xx/B5xx). Both of these actions will result in the need of DC Phoenix. Or even into a useless brick.