Related
Just wanna ask if there is any temporary fix to the proximity sensor of nexus 4.
During calls the screen doesn't turn off when placed close to the face.
I didn't get the chance to test it on stock 4.2 because when i turned my phone on it updated first to 4.2.1. Ever since then it has had proximity sensor not working during calls.
And i have never had any screen protectors on the screen.
Tried many custom ROMS as well but no difference at all.
Sent from my Nexus 4 using xda premium
how about kernals could be a bug in franco.
return it to 100% stock make sure its still doing it under those conditions then if it is contact Google and ask for an RMA this is probably your best course of action. if it has been like this since you pulled it out of the box then contact google right now and tell them the proxmity sensor is clearly broken
I have this issue too, but I'm on CM. Not sure if it's CM being a problem. Can someone on STOCK comment?
BTW as for screen protectors, unless you have a giant bubble or crap on your protector or underneath in the adhesive layer, the proximity sensor should perform fine. Before you blame my screen protector, I downloaded a proximity sensor app to show the readout. The screen protector with no cutout is fine. It's not optimal to have one like that, but the proximity sensor works fine.
isnt there a proximity senor app which lets you test it on the market?
dmo580 said:
I have this issue too, but I'm on CM. Not sure if it's CM being a problem. Can someone on STOCK comment?
Click to expand...
Click to collapse
Using stock. No issues on the sensor. Turns off on calls and turns on when I remove from the face. Have a spigen protector on with a cutout for it
Sent from my Nexus 4 using Tapatalk 2
dmo580 said:
I have this issue too, but I'm on CM. Not sure if it's CM being a problem. Can someone on STOCK comment?
BTW as for screen protectors, unless you have a giant bubble or crap on your protector or underneath in the adhesive layer, the proximity sensor should perform fine. Before you blame my screen protector, I downloaded a proximity sensor app to show the readout. The screen protector with no cutout is fine. It's not optimal to have one like that, but the proximity sensor works fine.
Click to expand...
Click to collapse
I was on stock 2 weeks ago when I started noticing it.
I am on cm now as well and its very much messed up.
Sent from my Nexus 4 using xda premium
bobola said:
isnt there a proximity senor app which lets you test it on the market?
Click to expand...
Click to collapse
There is.
I've installed and tested.
According to the app results, The proximity sensor seems to know when my hand is on it and when its off it. The value changes from 1.0 to 2.0
It just won't work on phone calls.
Sent from my Nexus 4 using xda premium
noobdeagle said:
how about kernals could be a bug in franco.
return it to 100% stock make sure its still doing it under those conditions then if it is contact Google and ask for an RMA this is probably your best course of action. if it has been like this since you pulled it out of the box then contact google right now and tell them the proxmity sensor is clearly broken
Click to expand...
Click to collapse
It doesn't seem to be a hardware issue.
Sensor tests were made and the proximity sensor picks up when my thumb is placed on it.
Problem is on phone calls alone. Right from stock ROM to CM, PA, Xylon, AOKP, almost all of the ROMs.
Sent from my Nexus 4 using xda premium
slimldj said:
It doesn't seem to be a hardware issue.
Sensor tests were made and the proximity sensor picks up when my thumb is placed on it.
Problem is on phone calls alone. Right from stock ROM to CM, PA, Xylon, AOKP, almost all of the ROMs.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Mine is stock and during calls it usually goes to my settings menu and changes my clock setting. When I get off the phone, screen is blank and I hit power button to end call. Still annoying at times when the clock changes.
any luck with finding a fix for the proximity sensor? Mine never works when I'm in a phone call. I have to either wait for the call to end or reset the phone by holding the power button to end the call.
feedmylittletroll said:
any luck with finding a fix for the proximity sensor? Mine never works when I'm in a phone call. I have to either wait for the call to end or reset the phone by holding the power button to end the call.
Click to expand...
Click to collapse
I think it's a bug and not a hardware issue. Perhaps one of the other reason for having a new factory image soon.
Sent from my Nexus 4 using xda premium
feedmylittletroll said:
any luck with finding a fix for the proximity sensor? Mine never works when I'm in a phone call. I have to either wait for the call to end or reset the phone by holding the power button to end the call.
Click to expand...
Click to collapse
I'm suffering this same problem too, hope they fix it soon..
slimldj said:
I think it's a bug and not a hardware issue. Perhaps one of the other reason for having a new factory image soon.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yes I think the fact that the app testing showed the sensor working so it points to software. Something is missing when the phone is in a call its not connecting to turn off. I thing Jellybean was flawed in many ways. My drop down brightness slider doesn't work for me nor auto brightness its OK for me cause I don't use either but still makes me mad.
Using Tapatalk 2
meetoo
Same problem here. Nexus 4. Stock Android 4.2.1. No screen protector installed.
While I'm in a call - the proximity sensor seems to work, as the screen goes dark... but at the end of the call when removing the phone away from my face, the screen does not come back on - making it impossible to hang up on the call (unless the caller on the other end hangs up first). It also makes it difficult to impossible to switch to and from speakerphone in the middle of a call.
Pushing the power button when this happens doesn't wake the screen either... sometimes it flashes but then goes black again. It doesn't happen on every call... maybe 75% of the time it does happen though. I've installed the proximity sensor app and it seems to recognize "covered" and "uncovered" states correctly when I cover the sensor at the top left corner of the phone while not in a call... so I'm thinking this is actually a software issue with the sensor and not a hardware issue. Drives me nuts though.
I've set "accessibility settings" to have the power button hang up calls as a temporary workaround... we'll see how that works.
treaty said:
Same problem here. Nexus 4. Stock Android 4.2.1. No screen protector installed.
While I'm in a call - the proximity sensor seems to work, as the screen goes dark... but at the end of the call when removing the phone away from my face, the screen does not come back on - making it impossible to hang up on the call (unless the caller on the other end hangs up first). It also makes it difficult to impossible to switch to and from speakerphone in the middle of a call.
Pushing the power button when this happens doesn't wake the screen either... sometimes it flashes but then goes black again. It doesn't happen on every call... maybe 75% of the time it does happen though. I've installed the proximity sensor app and it seems to recognize "covered" and "uncovered" states correctly when I cover the sensor at the top left corner of the phone while not in a call... so I'm thinking this is actually a software issue with the sensor and not a hardware issue. Drives me nuts though.
I've set "accessibility settings" to have the power button hang up calls as a temporary workaround... we'll see how that works.
Click to expand...
Click to collapse
Having the exact same issue here too on stock ROM.
Good idea on the accessibility settings! Will work until/if they fix it..
Also no screen protector.
I had the opposite problem to this where my screen would stay off during a call and I have to force restart to regain control.
Turns out it was the rubbish screen protector causing the issue. This was quickly fixed by cutting the screen protector so that the sensor was uncovered.
Dav_prime said:
I had the opposite problem to this where my screen would stay off during a call and I have to force restart to regain control.
Turns out it was the rubbish screen protector causing the issue. This was quickly fixed by cutting the screen protector so that the sensor was uncovered.
Click to expand...
Click to collapse
It was the same fix for mine when I first got my bse it worked fine for about a week but then over time it got worse. It was the screen protector just that lil bit worth of it wear caused enough blockage of the sensor. I got some new bse's and they now have a cutout for the proximity sensor and are screen optimized.
Sent from my Nexus 4 using Xparent Blue Tapatalk 2
use Proximity Actions by Novum Inceptum in playstore
rat99 said:
use Proximity Actions by Novum Inceptum in playstore
Click to expand...
Click to collapse
That won't fix anything.
I have two SGS4's. On one, when I place a call, the call screen stays on and it turns off when I raise it to my ear. It then turns on when I pull it away.
On the other, as soon as I place I call the screen goes dark. The only way to get it back is to push the power button and unlock the phone.
The "Turn screen off during a call" setting is set on both phones.
Anyone have any idea what is causing this? Next step is to do a wipe, but that just sucks.
I'm on stock and not rooted.
Thanks!
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
jprocket45 said:
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
Click to expand...
Click to collapse
Have you tried doing a reset yet? I'm hesitant since it's a pain to restore everything the way I like it. Definitely a weekend task.
Sirchuk said:
Have you tried doing a reset yet? I'm hesitant since it's a pain to restore everything the way I like it. Definitely a weekend task.
Click to expand...
Click to collapse
I have done a reset it solved it a little I guess but still having issues once in a great while all works well id blame it on the otterbox case but my wife has one so dunno if that could be the issue you have a case on urs never really played with the phone outside of the case lol
Sent from my SPH-L720 using xda app-developers app
jprocket45 said:
I have done a reset it solved it a little I guess but still having issues once in a great while all works well id blame it on the otterbox case but my wife has one so dunno if that could be the issue you have a case on urs never really played with the phone outside of the case lol
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Nope, mine is naked for now. I'll have to do a reset today/tomorrow and see if that solves my issue. If not, I'm taking back to the store for an exchange. It's only been a couple of weeks.
To late for me to take it back but suppose to be a update coming soon that does alot of fixes so we will see Good luck like I said reset I did notice fixed it a bit let me know how it goes I'm threw sprint just curious if you have them only reason I ask if it's just a carrier issue with software or something I doubt it but just figured to see who you had lol
Sent from my SPH-L720 using xda app-developers app
Dial *#7353# and make a test
sent from my Galaxy
samersh72 said:
Dial *#7353# and make a test
sent from my Galaxy
Click to expand...
Click to collapse
That's what I was looking for!
Sure enough,the proximity sensor was always on and wouldn't go off.
I'm with T-Mobile and they have a 30 return/exchange policy if you buy it outright, which I had, so it only took about 10 minutes for them to exchange it!
Thanks for the testing code! XDA comes through once again!
Same problem when I'm making a call, the screen goes blank when I put it to my head and when I remove it nothing happens.
I tried *#7353# and the proximity sensor goes of but will not stop..
I'm currently rooted, could it solve the problem to go back to stock?
Possible Fix
jprocket45 said:
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
Click to expand...
Click to collapse
I have had the same problem over the last 3 weeks and decided to take a gamble. I tightened up all the screws on the device and squeezed real hard on the area where the prox sensor is and poof... it works. I have no idea what was up but I feel like the sensor is loose and the pressure resolved the issue. Many other post have talked about cleaning the area over the prox real good and it works but I think its the pressure that is actually fixing the issue. Anyone else have any ideas? Sorry if this was posted incorrectly, I have never posted before but I felt this issue is a PITA.
I have i9500. Unrooted with latest OTA update installed (Build XXUBMG1).
I've been having the same problem with proximity sensor. When proximity sensor is enabled during phone calls (both regular calls and Viber calls), the screen is disabled. Also, my screen sometimes remains on during the call until I place it to my ear and sometimes it turns off immediately during the call. It wasn't always like this, but I can't remember when it started happening, but I suspect it was since the last OTA update.
I've searched around online and have noticed several comments.
Apparently this is an issue with several Galaxy models over the years (sorry, I lost the reference) and this thread: http://forum.xda-developers.com/showthread.php?t=2208440&page=2 mentions Galaxy Note 2 and SGS3 having the issue where there is something wrong with the threshold setting in the calibration settings. Mine appears to have the same issue where it always reads 0cm (i.e. always covered). However this thread also suggests a fix to input some code to adjust the calibration if your phone is rooted.
One suggestion is there is a misalignment of the sensor and so it might be partially covered by the phone's front fascia, causing the sensor to always read as covered or "1" or 0cm. But looking carefully at mine, it looks centred dead-on.
This thread http://forum.xda-developers.com/showthread.php?t=2417401 indicates that the sensor is always on as can be seen through a digital camera LCD (but not with your naked eye). I've tried this with my DSLR and confirmed this also happens with mine, even when the option is set to turn it off during calls, and also even when air gesture (which uses the prox sensor) is turned off. Not sure if this affects the problem or not though.
Can't remember where I read this, but someone mentioned that when shining a bright light over the phone, it works. So I downloaded two sensor apps from Google Play: Android Sensor Box, and Proximity Sensor Finder. And also used the inbuilt *#7353* feature. All three report that my proximity sensor is always reading that something is constantly covering it..... EXCEPT when a bright light (the sun works) is shining on the light sensor - not the proximity sensor. I tested this by using a torch on both sensors. When blocking light from the light sensor, the problem persists, but not when I allow the light to shine on the sensor. So it appears that they both act in unison.
Similar issue with air gestures, which used to work when my phone was new, even in relatively ambient light (but obviously not in a dark room), but now doesn't under similar conditions, and again... EXCEPT when a bright light is shining on the light sensor, or when I'm out in the sun.
Anyway, I'm not willing to root my phone at this point, just to try the fix suggested in http://forum.xda-developers.com/showthread.php?t=2208440&page=2 (my phone was bought overseas and returning it wouldn't be convenient for me). And since this wasn't always a problem with my phone, I suspect it is a software problem related to one of the recent OTA updates.
Edit: After further testing, it seems that air gestures use the front camera as well as the light and proximity sensors.
My proximity sensor works - when I go into diagnostic, it goes green when I bring a hand near the sensor - my issue is that it doesn't seem to notice when I remove my hand and there no longer is anything proximal - until I hit the back button to exit the test. Other than blowing out the earphone jack, does anyone have a suggestion?
Thx.
divche said:
I have i9500. Unrooted with latest OTA update installed (Build XXUBMG1).
I've been having the same problem with proximity sensor. When proximity sensor is enabled during phone calls (both regular calls and Viber calls), the screen is disabled. Also, my screen sometimes remains on during the call until I place it to my ear and sometimes it turns off immediately during the call. It wasn't always like this, but I can't remember when it started happening, but I suspect it was since the last OTA update.
I've searched around online and have noticed several comments.
Apparently this is an issue with several Galaxy models over the years (sorry, I lost the reference) and this thread: http://forum.xda-developers.com/showthread.php?t=2208440&page=2 mentions Galaxy Note 2 and SGS3 having the issue where there is something wrong with the threshold setting in the calibration settings. Mine appears to have the same issue where it always reads 0cm (i.e. always covered). However this thread also suggests a fix to input some code to adjust the calibration if your phone is rooted.
One suggestion is there is a misalignment of the sensor and so it might be partially covered by the phone's front fascia, causing the sensor to always read as covered or "1" or 0cm. But looking carefully at mine, it looks centred dead-on.
This thread http://forum.xda-developers.com/showthread.php?t=2417401 indicates that the sensor is always on as can be seen through a digital camera LCD (but not with your naked eye). I've tried this with my DSLR and confirmed this also happens with mine, even when the option is set to turn it off during calls, and also even when air gesture (which uses the prox sensor) is turned off. Not sure if this affects the problem or not though.
Can't remember where I read this, but someone mentioned that when shining a bright light over the phone, it works. So I downloaded two sensor apps from Google Play: Android Sensor Box, and Proximity Sensor Finder. And also used the inbuilt *#7353* feature. All three report that my proximity sensor is always reading that something is constantly covering it..... EXCEPT when a bright light (the sun works) is shining on the light sensor - not the proximity sensor. I tested this by using a torch on both sensors. When blocking light from the light sensor, the problem persists, but not when I allow the light to shine on the sensor. So it appears that they both act in unison.
Similar issue with air gestures, which used to work when my phone was new, even in relatively ambient light (but obviously not in a dark room), but now doesn't under similar conditions, and again... EXCEPT when a bright light is shining on the light sensor, or when I'm out in the sun.
Anyway, I'm not willing to root my phone at this point, just to try the fix suggested in http://forum.xda-developers.com/showthread.php?t=2208440&page=2 (my phone was bought overseas and returning it wouldn't be convenient for me). And since this wasn't always a problem with my phone, I suspect it is a software problem related to one of the recent OTA updates.
Edit: After further testing, it seems that air gestures use the front camera as well as the light and proximity sensors.
Click to expand...
Click to collapse
Proximity sensor
I had problem with proximity sensor in my galaxy s3 mini but my rear camera had error and fc also.I tried everything and nothing work.Finaly I open device and disconect camera and connect it again and camera started to work.But for my suprise proximity sensor now works perfect and I did not touch it.I can't explain what happend but I am happy.
I guess what it comes down to is.....for some you can reset the sensor, for some they can blow it out with compressed air, but others actually have to take apart their phone to fix this issue.
marduj5 said:
I had problem with proximity sensor in my galaxy s3 mini but my rear camera had error and fc also.I tried everything and nothing work.Finaly I open device and disconect camera and connect it again and camera started to work.But for my suprise proximity sensor now works perfect and I did not touch it.I can't explain what happend but I am happy.
Click to expand...
Click to collapse
hi
i have the same problem. any solution guys ?
( BTW - im on NB3 INS firmware )
I think I summarized the available solutions just before your post. There is no single thing which always works, you'll need to go through and see which fixes yours. This happens primarily because of hardware, with the sensor getting dirty - so it comes down to how invasive the procedure to clean it.
Shohat said:
i have the same problem. any solution guys ?
( BTW - im on NB3 INS firmware )
Click to expand...
Click to collapse
Hubris2 said:
I think I summarized the available solutions just before your post. There is no single thing which always works, you'll need to go through and see which fixes yours. This happens primarily because of hardware, with the sensor getting dirty - so it comes down to how invasive the procedure to clean it.
Click to expand...
Click to collapse
i'm sorry. i already tried your first solution and it worked like charm ! thank you ! :good:
HOw to solve, none of this works. How cann i clean proximity?
On my AT&T Galaxy S4, when I make a call the screen goes black when my face is next to the phone. This is good.
However, when I take my face away the screen will NOT turn back on. If I hit the [Power] or [Home] buttons, it will sometimes turn back on, but often times it requires several presses or requires me to wait several seconds until the phone turns back on.
I've tested this on stock and several ROMs...
Does anybody else have this problem?
If so, how do I fix it?
Pick up a can of compressed air and blow in the earphone. Sure enough the proximity sensor works perfectly now. I have solved this problem doing this. Tell me something
Enviado desde mi GT-I9505 usando Tapatalk
Dial *#0*#
You can test your proximity sensor readings here. It should turn the screen green and vibrate the phone constantly while your hand is in proximity. You can also see the numerical readings. The sensor works to about 6 inches.
If its not acting right, then you need to use faux kernel or you have a hardware failure.
If it is acting right, then use a better rom.
I seem to be having this issue on stock rom. When I bring my hand close to the sensor in diagnostic mode it goes green...but it doesn't stop when I remove my hand and there's nothing nearby. This seems to mirror the experience...where the phone goes black during a call, but doesn't wake up when it's removed.
faiyo said:
Dial *#0*#
You can test your proximity sensor readings here. It should turn the screen green and vibrate the phone constantly while your hand is in proximity. You can also see the numerical readings. The sensor works to about 6 inches.
If its not acting right, then you need to use faux kernel or you have a hardware failure.
If it is acting right, then use a better rom.
Click to expand...
Click to collapse
Hubris2 said:
I seem to be having this issue on stock rom. When I bring my hand close to the sensor in diagnostic mode it goes green...but it doesn't stop when I remove my hand and there's nothing nearby. This seems to mirror the experience...where the phone goes black during a call, but doesn't wake up when it's removed.
Click to expand...
Click to collapse
Yes, exactly!
I've flashed back to stock and tried that test screen. The sensor is OK at first, then I move my hand over it and it turns green and stays that way even after I remove my hand.
It seems like the sensor is half-working but gets stuck in the "on" position...
that sucks. i guess its time to contact samsung about warranty. just make sure theres no dirt on the sensor or anything
rpboronat said:
Pick up a can of compressed air and blow in the earphone. Sure enough the proximity sensor works perfectly now. I have solved this problem doing this. Tell me something
Enviado desde mi GT-I9505 usando Tapatalk
Click to expand...
Click to collapse
This is exactly what I done only I used a straw and I blew down it like hell and it cleared the problem. My phone was due to be returned to be fixed under warranty today but I tried a last ditch attempt and with the straw and blowing down it into the earpiece (aimed slightly towards the proximity sensor) I managed to sort the problem. It seems a little dirt or dust gets on the sensor and makes it malfunction.
Give it a whirl to see if it will work
My defy+ proximity sensor is not working.
As soon as I make a call, the phone screen goes black. The call goes thru fine, but the screen goes black.
No, I don''t have my finger or face near the proximity sensor.
No mods on the phone OS.
I did some debugging-
Cleaned the back of the phone by blowing air.
Tried the screw loosening like in the youtube video
Changed brightness settings from auto to manual.
Changed display turn off from 1min to never.
Finally, I downloded a sensor app and checked for change in the value of the proximity sensor when put by finger in the sensor area. The value was stuck at 3%, no matter what I did.
I was playing around and when I pressed the speaker area near the proximity sensor, the sensor value jumped to 100%
So I think the glass is blocking the sensor (or acting as a reflector).
Just to make sure the glass was the issue, I made a call by keeping the speaker area pressed. It worked as expected - no screen blanking after call. It does go black if I put my finger in the proximity sensor area.
I have no idea how to fix it.The screen & sensor need to be pressed closer.
Only thing I have tried is tighten the screws in the back. But no use.
Any help?
Since you don't have mods, it's probably broken, go to customer care.
Or you can maybe try factory reset
Do you have a screen protector?
Out yes remove it.
If not your sensor is broken.
Sent from my MB526 using XDA Premium 4 mobile app
Exactly as title says. Anyone else have the official clear view case from Samsung? Does AOD work when your cover is closed? Would be pretty convenient and for some reason Samsung decided not to include this handy feature...
It's a limitation I think.
AOD require light sensor, proximity sensor and some other sensor to work. The cover render these sensor useless and then may cause problem with AOD, so that's what I think why samsung disable it.
Sent from my GT-I9500 using Tapatalk
NonXtreme said:
It's a limitation I think.
AOD require light sensor, proximity sensor and some other sensor to work. The cover render these sensor useless and then may cause problem with AOD, so that's what I think why samsung disable it.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Well the proximity sensors work when talking on the phone with the cover closed... Seems like to me this can be implemented with a minor update.
elpindian said:
Well the proximity sensors work when talking on the phone with the cover closed... Seems like to me this can be implemented with a minor update.
Click to expand...
Click to collapse
Are you sure?
I'm not sure about how this kind of case work on new device but I used to have S-view case on my old s4 and it doesn't use proximity sensor to turn display off when calling with cover closed but use motion sensor to detect the movement of the phone to guess whether I'm holding my phone close to my face (and it fail sometimes)
Maybe you can test this by placing your phone on the table when recieving call. Without moving the phone, try cover the proximity sensor and see whether the screen is off.
NonXtreme said:
Are you sure?
I'm not sure about how this kind of case work on new device but I used to have S-view case on my old s4 and it doesn't use proximity sensor to turn display off when calling with cover closed but use motion sensor to detect the movement of the phone to guess whether I'm holding my phone close to my face (and it fail sometimes)
Maybe you can test this by placing your phone on the table when recieving call. Without moving the phone, try cover the proximity sensor and see whether the screen is off.
Click to expand...
Click to collapse
You are correct sir, it does not use the proximity sensors when the clear cover is on. But even with that, it uses the phone's other sensors to wake and sleep the screen... Why can't this be applied to the AOD? Just a little thing that would be nice to have.
elpindian said:
You are correct sir, it does not use the proximity sensors when the clear cover is on. But even with that, it uses the phone's other sensors to wake and sleep the screen... Why can't this be applied to the AOD? Just a little thing that would be nice to have.
Click to expand...
Click to collapse
Because AOD use proximity sensor to detect whether your phone is in the pocket and turn itself off to save battery. Motion sensor can't do that. Also for motion sensor to detect your movement it need to be on all the time, thus massive battery drain.