Related
Hi
I have recently rooted my bootloader locked Xperia Z and have installed Root Checker and confirmed Root successful. I have then installed the CWM mod and have booted up my Z with the volume down key pressed and this started fine.
The reason i have rooted my Z is to install the CyberShot mod as i can't live with how crap the camera is (due to compression and noise reduction) and wiped the cache and delvik cache as suggested but realised i had not copied the CyberShot mod .Zip to my SD card to clicked on reboot within CWM. This gave me an option to 'delete flash' or something similar and a guide i had been reading said to click yes so i did this and now when i boot up the phone, CWM wont boot up and the phone just starts normally.
I have removed the CWM with Root Browser and re-installed and also tried installing TWRP and neither will start when i boot up.
I have re-rooted the phone (via Z Rootkit) and again, my phone is rooted but cant load CWM or TWRP.
Any suggestions as i really need the CyberShot mod or im gonna have to sell phone and i really don't want to?
Iv read LOTS of threads and can't find an answer (If it helps, i did try and unlock the bootloader before i rooted phone via FlashTool and stated i was unable to do so as not Officially unlockable)
All help is greatly appreciated
Paul
Fixed now
I installed dual recovery and TWMP works and cybershot installed. Will test later (fingers crossed)
Hi,
I tried to install Custom ROM on my newly relesed Lenovo K6 Power (K33a42), I got successful in unlocking the bootloader and installing the TWRP recovery.
But after installing the Linage OS and the latest gapps through TWRP, when i launched the OS. An error message pops up which says with Encryption Unsuccessful. A reset button was available, but didn't help. as i am keep coming to the same error after doing all it says.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried installing the stock backup but now the backup stock OS is also getting stuck at Lenovo logo.
Found a fix to this problem. Solved by Pourush Sharan Bhargav
1. Wipe everything from twrp.
2. Download a stock rom of k6 power and flash it with a Qualcomm flash tool. Watch video for more info
3. Go to settings check.......phone now will not be encrypted.
4. If it says to encrypt, do not do it.
5. Go to twrp and make changes to data and cache partition to ext4.
6. Wipe everyting again from twrp.
7. Flash your custom rom like RR and gapps.
8. Done, enjoy.....
All the best. Please give me Kudos if this tip is helpful to you.
Mukul
Are you do a factory reset before installing LOS?
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
pawelik said:
Are you do a factory reset before installing LOS?
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
Click to expand...
Click to collapse
No, but i deleted the data, System, Delvik, Cache Internal storage in TWRP except FRP, MicroSD and USB-Otg (Which are not required i hope) before installing the ROM from MicroSD .
So... Reboot into TWRP, go to wipe, swipe to factory reset, and flash a ROM
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
Its working?
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
Hi,
I tried to install Custom ROM on my newly relesed Lenovo K6 Power (K33a42), I got successful in unlocking the bootloader and installing the TWRP recovery.
But after installing the Linage OS and the latest gapps through TWRP, when i launched the OS. An error message pops up which says with Encryption Unsuccessful. A reset button was available, but didn't help. as i am keep coming to the same error after doing all it says.
Encryption Unsucessful
Tried installing the stock backup but now the backup stock OS is also getting stuck at Lenovo logo.
Is there any fix to this problem?
Please advise as the phone is basically useless without an OS and i am not able to install any of that.
Thanks,
Mukul
Click to expand...
Click to collapse
For me the same, received the same message. Did everthing, no chance to install any rom! Encryption Unsucessful!
Andi_s75 said:
For me the same, received the same message. Did everthing, no chance to install any rom! Encryption Unsucessful!
Click to expand...
Click to collapse
Found a solution on my own. check below link
https://forum.xda-developers.com/android/help/solved-encryption-unsuccessful-lenovo-t3652842
pawelik said:
Its working?
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
Click to expand...
Click to collapse
No, it was not working but found the solution my my own. Anyways thanks for the help
https://forum.xda-developers.com/android/help/solved-encryption-unsuccessful-lenovo-t3652842
how?
pawelik said:
So... Reboot into TWRP, go to wipe, swipe to factory reset, and flash a ROM
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
Click to expand...
Click to collapse
How i will reboot in twrp if i canoot boot into system? I conected in fastboot mode, but after put 'add devices' no one device appear. Really annoing. Can help?
felpsi said:
How i will reboot in twrp if i canoot boot into system? I conected in fastboot mode, but after put 'add devices' no one device appear. Really annoing. Can help?
Click to expand...
Click to collapse
If you have unlocked bootloader and have custom rom, connect devices in fastboot mode, then type: fastboot reboot recovery.
If you have unlocked bootloader, but you don't have custom recovery, downloader him, place in ADB folder, then connect device in fastboot mode and type: fastboot flash recovery yourfilename.img
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
After all of that, type in ADB: fastboot devices. If you see it, you can use my instructions.
pawelik said:
If you have unlocked bootloader and have custom rom, connect devices in fastboot mode, then type: fastboot reboot recovery.
If you have unlocked bootloader, but you don't have custom recovery, downloader him, place in ADB folder, then connect device in fastboot mode and type: fastboot flash recovery yourfilename.img
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
After all of that, type in ADB: fastboot devices. If you see it, you can use my instructions.
Click to expand...
Click to collapse
Its just exctly my problem of not showing the device after put in the cmd, adb device command.... it fills blanck. I didtn have much choice and had put the stock version of the rom........... Seems that after my researches that message of encryption unsucessful only appears because i had put the rom and the gapps in the sd card. Anyone confirm this? Is a best practice to put in the internal storage (the custom rom and the gapps) ? And if i will do the wipes, how they will survive to them without error if they are in the internal storage?
Really confuses a brain....
felpsi said:
Its just exctly my problem of not showing the device after put in the cmd, adb device command.... it fills blanck. I didtn have much choice and had put the stock version of the rom........... Seems that after my researches that message of encryption unsucessful only appears because i had put the rom and the gapps in the sd card. Anyone confirm this? Is a best practice to put in the internal storage (the custom rom and the gapps) ? And if i will do the wipes, how they will survive to them without error if they are in the internal storage?
Really confuses a brain....
Click to expand...
Click to collapse
Are you typing ADB devices or fastboot devices?
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
felpsi said:
Its just exctly my problem of not showing the device after put in the cmd, adb device command.... it fills blanck. I didtn have much choice and had put the stock version of the rom........... Seems that after my researches that message of encryption unsucessful only appears because i had put the rom and the gapps in the sd card. Anyone confirm this? Is a best practice to put in the internal storage (the custom rom and the gapps) ? And if i will do the wipes, how they will survive to them without error if they are in the internal storage?
Really confuses a brain....
Click to expand...
Click to collapse
Exactly just Install ROM using the internal memory don't use any other storage option like microSD Card or OTG. First do all the wipes > Then connect USB and copy ROM and Gapps in internal memory and install. It worked for me.
Mukul_Meena said:
Exactly just Install ROM using the internal memory don't use any other storage option like microSD Card or OTG. First do all the wipes > Then connect USB and copy ROM and Gapps in internal memory and install. It worked for me.
Click to expand...
Click to collapse
I simply formated the data after do all the wipes. The rom continues in sdcard for better manipulating the files. Thanks anyway.
Solved.......
I was having same error in my new k6 power and finally i conquered it.
U need to do following steps ÷
1. Wipe everything from twrp.
2. Download a stock rom of k6 power and flash it with a Qualcomm flash tool.
3. Go to settings check.......phone now will not be encrypted.
4. If it says to encrypt, do not do it.
5. Go to twrp and make changes to data and cache partition to ext4.
6. Wipe everyting again from twrp.
7. Flash your custom rom like RR and gapps.
8. Done, enjoy.....
Remember if not working change the order of steps and do again and again this is the only solution.
I'm now using RR in my k6 power
this is the truth to decrypt any phone reboot to bootloader type below code one by. you will loss all your data after doing this.
fastboot erase config
fastboot format userdata
fastboot reboot
Mukul_Meena said:
Hi,
I tried to install Custom ROM on my newly relesed Lenovo K6 Power (K33a42), I got successful in unlocking the bootloader and installing the TWRP recovery.
But after installing the Linage OS and the latest gapps through TWRP, when i launched the OS. An error message pops up which says with Encryption Unsuccessful. A reset button was available, but didn't help. as i am keep coming to the same error after doing all it says.
Tried installing the stock backup but now the backup stock OS is also getting stuck at Lenovo logo.
Found a fix to this problem. Solved by Pourush Sharan Bhargav
1. Wipe everything from twrp.
2. Download a stock rom of k6 power and flash it with a Qualcomm flash tool. Watch video for more info
3. Go to settings check.......phone now will not be encrypted.
4. If it says to encrypt, do not do it.
5. Go to twrp and make changes to data and cache partition to ext4.
6. Wipe everyting again from twrp.
7. Flash your custom rom like RR and gapps.
8. Done, enjoy.....
All the best. Please give me Kudos if this tip is helpful to you.
Mukul
Click to expand...
Click to collapse
Please please tell in details about step 5
mark332 said:
this is the truth to decrypt any phone reboot to bootloader type below code one by. you will loss all your data after doing this.
fastboot erase config
fastboot format userdata
fastboot reboot
Click to expand...
Click to collapse
This was short and sweet.
Works and is perfectly safe as long as you have nothing left on the device. cause Internal sd card data gets deleted. a little warning would never hurt more than the loss.
Mukul_Meena said:
No, but i deleted the data, System, Delvik, Cache Internal storage in TWRP except FRP, MicroSD and USB-Otg (Which are not required i hope) before installing the ROM from MicroSD .
Click to expand...
Click to collapse
After installing any custom rom on stock nougat you have to clear dalvik/cache. don't reboot to system straight away. Go back to twrp home, go to wipe then do a factory reset and clear data( the typing yes thing). If it says error to clear data, just reboot to recovery again and than try to clear data( the typing yes thing). You will now be able to boot into custom rom and without any encryption unsuccessful message.
---------- Post added at 12:32 PM ---------- Previous post was at 12:27 PM ----------
After installing any custom rom on stock nougat you have to clear dalvik/cache. don't reboot to system straight away. Go back to twrp home, go to wipe then do a factory reset and clear data( the typing yes thing). If it says error to clear data, just reboot to recovery again and than try to clear data( the typing yes thing). You will now be able to boot into custom rom and without any encryption unsuccessful message.
Panzer007 said:
After installing any custom rom on stock nougat you have to clear dalvik/cache. don't reboot to system straight away. Go back to twrp home, go to wipe then do a factory reset and clear data( the typing yes thing). If it says error to clear data, just reboot to recovery again and than try to clear data( the typing yes thing). You will now be able to boot into custom rom and without any encryption unsuccessful message.
---------- Post added at 12:32 PM ---------- Previous post was at 12:27 PM ----------
After installing any custom rom on stock nougat you have to clear dalvik/cache. don't reboot to system straight away. Go back to twrp home, go to wipe then do a factory reset and clear data( the typing yes thing). If it says error to clear data, just reboot to recovery again and than try to clear data( the typing yes thing). You will now be able to boot into custom rom and without any encryption unsuccessful message.
Click to expand...
Click to collapse
Thanks alot friend.
I have wasted more than 4 hours in trying to find a solution for this problem. I have tried almost everything.
But this just solved the issue in seconds.
Hello,
I've tried to install this ROM on my Xperia Z3 6603 but it keeps on bootloop from first boot and is not working...
The first time I've installed the rom with a Gapps package, so I've tried without the Gapps package but i got the same behaviour.
Is there any stable version?
I've tried:
omni-7.1.2-20170806-leo-WEEKLY.zip
omni-7.1.2-20170813-leo-WEEKLY.zip
My installation steps were:
Flash latest Z3 official firmware
Flash a kernel with TWRP
The installation doesn't detect my phone, so I've installed the Omni kernel
Flashed the latest twrp recovery for my Z3 (3.1.1)
Cleared system, data, cache and dalvik
Installed Omni ROM using the downloaded zip
(only the first time) I've installed Gapps Nano
I've noticed that sometimes the ROM starts on safe mode, but don't cares, it bootloops again.
Thanks in advance.
Here is my history with omni-7.1.2-20170820-leo-WEEKLY.zip:
-after installation no Sim is detected and Mac is shown as 02:00:00:00:00:00
-*reboot --> [mostly] Sim is detected
-in settings #reset networkconnections to get the right Mac
If i connect to Wifi by getting ip always soft bootloop.
Where could be the mistake?
hello, i unlocked my mi 9t recently and wanted to flash another rom, but any rom i flash my phone doesnt boot it shows mi logo or it just reboots to fastboot. i tried different twrp recoveries but none of them worked. Any help?
What ROMs did you try to flash? and what steps did you follow?
Schnedi said:
What ROMs did you try to flash? and what steps did you follow?
Click to expand...
Click to collapse
i tried paranoid, evolution x, mi globe, xiaomi.eu and pixel experience. i flashed twrp -> wiped everything -> flashed rom,gapps,magisk
tuxicMi said:
i tried paranoid, evolution x, mi globe, xiaomi.eu and pixel experience. i flashed twrp -> wiped everything -> flashed rom,gapps,magisk
Click to expand...
Click to collapse
Reboot to recovery after wiping everything and then flash rom, etc.
I suggest the 4pda or Greek twrp
albysprx said:
Reboot to recovery after wiping everything and then flash rom, etc.
I suggest the 4pda or Greek twrp
Click to expand...
Click to collapse
i reboot after wiping and i have used the greek and the 4pda twrp
Wipe is not enough, you have to format data in TWRP.
fmcheetah said:
Wipe is not enough, you have to format data in TWRP.
Click to expand...
Click to collapse
i do format data
I have the same issue, with Greek twrp and the last stable or developer rom.
Format everything from twrp, reboot recovery, install the rom, format data again. And when I choose reboot system, it never open. And I can't go to twrp again, like it's lost it
same issue here. bricked phone?
can someone explain why it works by other and some guys it not work with twrp.? and flash a rom.
Verstuurd vanaf mijn Mi 9T met Tapatalk
Hello guys
someone can help me, to explain me why in my 9t global cant install miui eu stable or mi globe (MIUI builder)?
my steps
- unlocked bootloader
- installed two of twrp versions (greek and 4pda)
- format data ---> yes, reboot
- copy miui eu (latest stable) in phone storage,
- Wipe data/cache/dalvik cache and install miui eu zip, then reboot
- always reboot the phone stuck at mi logo or at mi boot, then 30 minutes to wait nothing happened
- the same steps with miui mi-globe (rom builder) and the same result: stuck at mi logo
- then reflesh fastboot stock miui stable latest with mi flasher
someone can help me, why i cant install miui eu?
thanks in advance
Use only 4pda TWRP. Follow the same steps you did like explained, but after flashing the ROM, before rebooting, in TWRP, go to Advanced and click on Rm avb-verity&forceencrypt, when it's done, restart.
ekin_strops said:
Use only 4pda TWRP. Follow the same steps you did like explained, but after flashing the ROM, before rebooting, in TWRP, go to Advanced and click on Rm avb-verity&forceencrypt, when it's done, restart.
Click to expand...
Click to collapse
Dear friend
What is that? Rm/avb-verity thing?
iaio72 said:
Hello guys
someone can help me, to explain me why in my 9t global cant install miui eu stable or mi globe (MIUI builder)?
my steps
- unlocked bootloader
- installed two of twrp versions (greek and 4pda)
- format data ---> yes, reboot
- copy miui eu (latest stable) in phone storage,
- Wipe data/cache/dalvik cache and install miui eu zip, then reboot
- always reboot the phone stuck at mi logo or at mi boot, then 30 minutes to wait nothing happened
- the same steps with miui mi-globe (rom builder) and the same result: stuck at mi logo
- then reflesh fastboot stock miui stable latest with mi flasher
someone can help me, why i cant install miui eu?
thanks in advance
Click to expand...
Click to collapse
I am on latest eu stable and use greek TWRP (3.3.1_12-08) basically i did the same steps as you tried to do.
After format data and sucessful reboot to TWRP there is no need to wipe anything.
For greek TWRP i recommend an USB-OTG device with latest MIUI by Xiaomi.eu 10.3.15 stable on it.
In TWRP install the SW from USB_OTG
Reboot to system, wait 2-4 min and averything should be working.
4dpa TWRP is also working fine, i tested both.
Direkt link to greek TWRP :https://xiaomi-miui.gr/community/index.php/Thread/25256-TWRP-3-3-X-X-για-συσκευές-XIAOMI/
fmcheetah said:
I am on latest eu stable and use greek TWRP (3.3.1_12-08) basically i did the same steps as you tried to do.
After format data and sucessful reboot to TWRP there is no need to wipe anything.
For greek TWRP i recommend an USB-OTG device with latest MIUI by Xiaomi.eu 10.3.15 stable on it.
In TWRP install the SW from USB_OTG
Reboot to system, wait 2-4 min and averything should be working.
4dpa TWRP is also working fine, i tested both.
Direkt link to greek TWRP :https://xiaomi-miui.gr/community/index.php/Thread/25256-TWRP-3-3-X-X-για-συσκευές-XIAOMI/
Click to expand...
Click to collapse
I try it with otg-usb but the twrp don't recognize, where I find this software that work on twrp? Thx
why is xiaomi.eu rom better than the global one?
Me don't work usb/otg on twrp, other solution guys?
iaio72 said:
Hello guys
someone can help me, to explain me why in my 9t global cant install miui eu stable or mi globe (MIUI builder)?
my steps
- unlocked bootloader
- installed two of twrp versions (greek and 4pda)
- format data ---> yes, reboot
- copy miui eu (latest stable) in phone storage,
- Wipe data/cache/dalvik cache and install miui eu zip, then reboot
- always reboot the phone stuck at mi logo or at mi boot, then 30 minutes to wait nothing happened
- the same steps with miui mi-globe (rom builder) and the same result: stuck at mi logo
- then reflesh fastboot stock miui stable latest with mi flasher
someone can help me, why i cant install miui eu?
thanks in advance
Click to expand...
Click to collapse
i have successfully installed EU v10.3.15 from EEA v10.3.12, my prcedure is this, format data "Yes", wipe data/cache/dalvic, cache,system. and install miui eu v10.3.15 it boot successfully.
finally, solved and installed, after installation before to reboot, click on twrp/advanced/Rm avb-verity&forceencrypt and then its ok
thanks guys and to @ekin_strops
Dear friends
Someone could give me any help about that question?
What is the function of this rm/avb-verity? Why enable It?
mauriciocardoso said:
Dear friends
Someone could give me any help about that question?
What is the function of this rm/avb-verity? Why enable It?
Click to expand...
Click to collapse
plus or minus:
"Dm-verity and Forced Encryption Disabler. Many Android ROMs have become more and more secure. Many devices have been equipped with new system security mechanism to protect any advanced modification to the system itself. One of the known mechanism is Device Mapper Verity, also known as dm-verity"
iaio72 said:
finally, solved and installed, after installation before to reboot, click on twrp/advanced/Rm avb-verity&forceencrypt and then its ok
thanks guys and to @ekin_strops
Click to expand...
Click to collapse
Hello your phone is a global or EEA ?
What's the difference between global and eea?
Anyway I think is global version