mi 9t rom flashing - Redmi K20 / Xiaomi Mi 9T Questions & Answers

hello, i unlocked my mi 9t recently and wanted to flash another rom, but any rom i flash my phone doesnt boot it shows mi logo or it just reboots to fastboot. i tried different twrp recoveries but none of them worked. Any help?

What ROMs did you try to flash? and what steps did you follow?

Schnedi said:
What ROMs did you try to flash? and what steps did you follow?
Click to expand...
Click to collapse
i tried paranoid, evolution x, mi globe, xiaomi.eu and pixel experience. i flashed twrp -> wiped everything -> flashed rom,gapps,magisk

tuxicMi said:
i tried paranoid, evolution x, mi globe, xiaomi.eu and pixel experience. i flashed twrp -> wiped everything -> flashed rom,gapps,magisk
Click to expand...
Click to collapse
Reboot to recovery after wiping everything and then flash rom, etc.
I suggest the 4pda or Greek twrp

albysprx said:
Reboot to recovery after wiping everything and then flash rom, etc.
I suggest the 4pda or Greek twrp
Click to expand...
Click to collapse
i reboot after wiping and i have used the greek and the 4pda twrp

Wipe is not enough, you have to format data in TWRP.

fmcheetah said:
Wipe is not enough, you have to format data in TWRP.
Click to expand...
Click to collapse
i do format data

I have the same issue, with Greek twrp and the last stable or developer rom.
Format everything from twrp, reboot recovery, install the rom, format data again. And when I choose reboot system, it never open. And I can't go to twrp again, like it's lost it

same issue here. bricked phone?

can someone explain why it works by other and some guys it not work with twrp.? and flash a rom.
Verstuurd vanaf mijn Mi 9T met Tapatalk

Related

[HELP] Installation Miui Eu

Hello guys
someone can help me, to explain me why in my 9t global cant install miui eu stable or mi globe (MIUI builder)?
my steps
- unlocked bootloader
- installed two of twrp versions (greek and 4pda)
- format data ---> yes, reboot
- copy miui eu (latest stable) in phone storage,
- Wipe data/cache/dalvik cache and install miui eu zip, then reboot
- always reboot the phone stuck at mi logo or at mi boot, then 30 minutes to wait nothing happened
- the same steps with miui mi-globe (rom builder) and the same result: stuck at mi logo
- then reflesh fastboot stock miui stable latest with mi flasher
someone can help me, why i cant install miui eu?
thanks in advance
Use only 4pda TWRP. Follow the same steps you did like explained, but after flashing the ROM, before rebooting, in TWRP, go to Advanced and click on Rm avb-verity&forceencrypt, when it's done, restart.
ekin_strops said:
Use only 4pda TWRP. Follow the same steps you did like explained, but after flashing the ROM, before rebooting, in TWRP, go to Advanced and click on Rm avb-verity&forceencrypt, when it's done, restart.
Click to expand...
Click to collapse
Dear friend
What is that? Rm/avb-verity thing?
iaio72 said:
Hello guys
someone can help me, to explain me why in my 9t global cant install miui eu stable or mi globe (MIUI builder)?
my steps
- unlocked bootloader
- installed two of twrp versions (greek and 4pda)
- format data ---> yes, reboot
- copy miui eu (latest stable) in phone storage,
- Wipe data/cache/dalvik cache and install miui eu zip, then reboot
- always reboot the phone stuck at mi logo or at mi boot, then 30 minutes to wait nothing happened
- the same steps with miui mi-globe (rom builder) and the same result: stuck at mi logo
- then reflesh fastboot stock miui stable latest with mi flasher
someone can help me, why i cant install miui eu?
thanks in advance
Click to expand...
Click to collapse
I am on latest eu stable and use greek TWRP (3.3.1_12-08) basically i did the same steps as you tried to do.
After format data and sucessful reboot to TWRP there is no need to wipe anything.
For greek TWRP i recommend an USB-OTG device with latest MIUI by Xiaomi.eu 10.3.15 stable on it.
In TWRP install the SW from USB_OTG
Reboot to system, wait 2-4 min and averything should be working.
4dpa TWRP is also working fine, i tested both.
Direkt link to greek TWRP :https://xiaomi-miui.gr/community/index.php/Thread/25256-TWRP-3-3-X-X-για-συσκευές-XIAOMI/
fmcheetah said:
I am on latest eu stable and use greek TWRP (3.3.1_12-08) basically i did the same steps as you tried to do.
After format data and sucessful reboot to TWRP there is no need to wipe anything.
For greek TWRP i recommend an USB-OTG device with latest MIUI by Xiaomi.eu 10.3.15 stable on it.
In TWRP install the SW from USB_OTG
Reboot to system, wait 2-4 min and averything should be working.
4dpa TWRP is also working fine, i tested both.
Direkt link to greek TWRP :https://xiaomi-miui.gr/community/index.php/Thread/25256-TWRP-3-3-X-X-για-συσκευές-XIAOMI/
Click to expand...
Click to collapse
I try it with otg-usb but the twrp don't recognize, where I find this software that work on twrp? Thx
why is xiaomi.eu rom better than the global one?
Me don't work usb/otg on twrp, other solution guys?
iaio72 said:
Hello guys
someone can help me, to explain me why in my 9t global cant install miui eu stable or mi globe (MIUI builder)?
my steps
- unlocked bootloader
- installed two of twrp versions (greek and 4pda)
- format data ---> yes, reboot
- copy miui eu (latest stable) in phone storage,
- Wipe data/cache/dalvik cache and install miui eu zip, then reboot
- always reboot the phone stuck at mi logo or at mi boot, then 30 minutes to wait nothing happened
- the same steps with miui mi-globe (rom builder) and the same result: stuck at mi logo
- then reflesh fastboot stock miui stable latest with mi flasher
someone can help me, why i cant install miui eu?
thanks in advance
Click to expand...
Click to collapse
i have successfully installed EU v10.3.15 from EEA v10.3.12, my prcedure is this, format data "Yes", wipe data/cache/dalvic, cache,system. and install miui eu v10.3.15 it boot successfully.
finally, solved and installed, after installation before to reboot, click on twrp/advanced/Rm avb-verity&forceencrypt and then its ok
thanks guys and to @ekin_strops
Dear friends
Someone could give me any help about that question?
What is the function of this rm/avb-verity? Why enable It?
mauriciocardoso said:
Dear friends
Someone could give me any help about that question?
What is the function of this rm/avb-verity? Why enable It?
Click to expand...
Click to collapse
plus or minus:
"Dm-verity and Forced Encryption Disabler. Many Android ROMs have become more and more secure. Many devices have been equipped with new system security mechanism to protect any advanced modification to the system itself. One of the known mechanism is Device Mapper Verity, also known as dm-verity"
iaio72 said:
finally, solved and installed, after installation before to reboot, click on twrp/advanced/Rm avb-verity&forceencrypt and then its ok
thanks guys and to @ekin_strops
Click to expand...
Click to collapse
Hello your phone is a global or EEA ?
What's the difference between global and eea?
Anyway I think is global version

Soft bricked my Mi9T by flashing Xiaomi EU 9.11.14. Need help!

Hello all,
So finally my waiting time was over and could unlock my bootloader, excited to flash xiaomi.eu 9.11.14 (I was on MIUI11 Global based on Android 9.)
I unlocked my phone straight away and followed this guide to install it: https://xiaomi.eu/community/threads/9-11-14.53327/
After unlocking I then booted into system to enable ADB debugging. Then flashed and booted into TWRP (version I used: twrp-3.3.1-3-davinci-mauronofrio.img). I wiped /data and cache. I selected the Xiaomi EU ROM and started flashing, flash went successful. Then booted into system. But then it got stuck at the "Redmi - powered by Xiaomi" splash screen and waited a bit thinking it would take a bit. Took over 10 min before I figured out I might've done something wrong. So booted back into recovery where a chinese TWRP popped up, managed to change language to English. Then tried flashing Xiaomi EU again, but my internal storage contained only folders of random numbers and characters (unreadable format) and the Xiaomi EU ROM wasn't there. I then tried moving the Xiaomi EU ROM from my PC to my phone again. Didn't work, can't transfer anything to internal storage although storage was mounted. Also my main internal storage name turned into Chinese characters. I thought of flashing the same TWRP I used earlier with fastboot but without success. Now my phone also can't boot into TWRP, only fastboot working.
Now I am downloading the Full fastboot ROM to hope to recover it back with the MiFlash tool. But I need help with fixing how to correctly flash Xiaomi EU. How could my flash not work? Did anyone had the same?
In TWRP you must Format Data and confirm with yes, wipe data is not enough.
fmcheetah said:
In TWRP you must Format Data and confirm with yes, wipe data is not enough.
Click to expand...
Click to collapse
Thanks man! Will try. Gladly my phone booted again after fastboot flashing stock ROM. Will try now.
fmcheetah said:
In TWRP you must Format Data and confirm with yes, wipe data is not enough.
Click to expand...
Click to collapse
That did the job. Thank you. Only now I have no signal, my phone is seeing the sim card tho because I had to enter Sim card Pin code. Do u can think of anything why this might happen?
RSG14 said:
Contact MOD EDIT: Content Removed on Telegram
They'll fix your phone in no time
Click to expand...
Click to collapse
6 post in forum and 4 are this repeated post...
Say this and nothing its the same...
Enviado desde mi Mi 9T mediante Tapatalk

OnePlus 6t Wifi Issue on custom roms

Okay so I've tried Pixel experience, lineage os , omni rom treskmod and couple of other custom android 10 roms, all stable and official and also updated ones, the wifi just simply doesn't work, wifi hotspot won't turn on either. I've tried every solution on the internet. I've even factory reset my phone using msm download tool and no luck(did this countless times).
I'm back in OOS 10.3.2 and there's no issue apparently.
At one point , i flashed a custom rom and the wifi didn't work, so I flashed OOS in the two slots and checked , the wifi works in OOS apparently, and never in custom roms.
Has anyone got this issue before and knows a solution?
How is your installation procedure?
onliner said:
How is your installation procedure?
Click to expand...
Click to collapse
I flash OOS and twrp on both slots, reboot recovery,
And then flash the rom and twrp, reboot recovery,then format data and factory reset, reboot recovery, if needed for some gapps, then reboot system
ivanthomas said:
I flash OOS and twrp on both slots, reboot recovery,
And then flash the rom and twrp, reboot recovery,then format data and factory reset, reboot recovery, if needed for some gapps, then reboot system
Click to expand...
Click to collapse
That's a lot of unnecessary steps. OOS on both slots, reboot to bootloader, boot twrp, format data and flash the custom rom, reboot bootloader, boot twrp and flash gapps, don't install twrp permanently if you are not going to install Magisk.
onliner said:
That's a lot of unnecessary steps. OOS on both slots, reboot to bootloader, boot twrp, format data and flash the custom rom, reboot bootloader, boot twrp and flash gapps, don't install twrp permanently if you are not going to install Magisk.
Click to expand...
Click to collapse
I need magisk too, I usually permanently install twrp
Also you think it's the way I'm installing at fault here? Or the rom? Or is it something wrong with my device?
ivanthomas said:
it's the way I'm installing at fault here?
Click to expand...
Click to collapse
This.
I always install roms with the procedure i said above and have never had any problems.
onliner said:
This.
I always install roms with the procedure i said above and have never had any problems.
Click to expand...
Click to collapse
Alright so got one doubt, I used OOS 10.3.2 to flash, should it be oos 10.0 only?
Thought that didn't make a difference.
I am also facing the same issue. Were you able to find any solution ?
So I found out treskmod omni rom and Paranoid android quartz 2 work perfectly , try those out, it still doesn't solve the problem in the other roms though. So not exactly a solution.

[SOLVED] Bootloop since TWRP installation

Hi Everyone,
The first thing I did after flashing TWRP on my RN7 was a BackUp with TWRP of all my partitions. (It was the first time i launched it, so i also saved the Miui Recovery).
Then I tried to boot on the system but I get stucked in the "Redmi by Xiaomi" screen.
I tried to install an AOSPExtended Rom but it didn't worked.
I flashed Orange Fox and retrayed to flash AOSPExtended. It didn't worked either because it was designed for violet and not for Lavander (facepalm).
I tried an Unofficial LineageOS found on XDA, the installation worked but I'm stuck in a bootloop since.
The Redmi by Xiaomi screen starts over and over. I can't even turn off my phone.
I tried to reboot after wiping Cache, System, Vendor, Data and Dalvik (just to see if I would be able to turn it off) but same result.
Do you have any Ideas?
Thanks a lot!
Which rom did you have while taking the first backup?
Wipe System, Data, Cache, then reboot the recovery and then restore the backup of System, Data and Boot. Don't restore recovery. See if this works.
Lisatio said:
Hi Everyone,
The first thing I did after flashing TWRP on my RN7 was a BackUp with TWRP of all my partitions. (It was the first time i launched it, so i also saved the Miui Recovery).
Then I tried to boot on the system but I get stucked in the "Redmi by Xiaomi" screen.
I tried to install an AOSPExtended Rom but it didn't worked.
I flashed Orange Fox and retrayed to flash AOSPExtended. It didn't worked either because it was designed for violet and not for Lavander (facepalm).
I tried an Unofficial LineageOS found on XDA, the installation worked but I'm stuck in a bootloop since.
The Redmi by Xiaomi screen starts over and over. I can't even turn off my phone.
I tried to reboot after wiping Cache, System, Vendor, Data and Dalvik (just to see if I would be able to turn it off) but same result.
Do you have any Ideas?
Thanks a lot!
Click to expand...
Click to collapse
Flash a custom ROM with the latest OrangeFox, then format the data partition (Menu->Manage Partitions->Data->Format data->"yes"), then reboot to system.
Do NOT try to restore your TWRP backups.
I finally tried an other Lineage Os Rom from XDA and it finally worked.
But I don't really know why.
The first one I tried to install was in fact a Potato OS... (You can download it from the same page!)
But still, this ROM was for Lavander too, I don't understand why it didn't worked....
Anyway my phone is OK now! Thanks a lot!
DarthJabba9 said:
Flash a custom ROM with the latest OrangeFox, then format the data partition (Menu->Manage Partitions->Data->Format data->"yes"), then reboot to system.
Do NOT try to restore your TWRP backups.
Click to expand...
Click to collapse
What would happen if I tried to restore my Backup?
Lisatio said:
What would happen if I tried to restore my Backup?
Click to expand...
Click to collapse
What would happen is :crying: Returning to MIUI from a custom ROM is a can of worms. There are instructions here: https://wiki.orangefox.tech/en/guides. But even that is not guaranteed to do the job.
DarthJabba9 said:
What would happen is :crying: Returning to MIUI from a custom ROM is a can of worms. There are instructions here: https://wiki.orangefox.tech/en/guides. But even that is not guaranteed to do the job.
Click to expand...
Click to collapse
Thanks a lot, I won't try then!
Do I have to Edit my thread title with a [SOLVED] sign?
Lisatio said:
...Do I have to Edit my thread title with a [SOLVED] sign?
Click to expand...
Click to collapse
I think that would be a good thing, otherwise, people will stumble upon it, and keep posting.

Xiaomi eu stable installation on Mi9T

Hey!
I want to ask you good people how to properly change my global 11.0.1.0.PFJMIXM to miui 11 stable xiaomi eu (xiaomi.eu_multi_HMK20MI9T_V11.0.6.0.QFJCNXM_v11-10).
My phone is actually encrypted, has antiroll back "1", twrp already installed (twrp-3.3.1-2-davinci-fix).
Lately I've tried:
1. twrp format data, typed "yes"
2. copied rom, installed
3. reboot to recovery, and flashed magisk
and bootlooped...
I also would like to have hasty kernel and try new 82hz dtbo... If you be soo kind, you can suggest me how to do it also.
Thank you
rapids said:
Hey!
I want to ask you good people how to properly change my global 11.0.1.0.PFJMIXM to miui 11 stable xiaomi eu (xiaomi.eu_multi_HMK20MI9T_V11.0.6.0.QFJCNXM_v11-10).
My phone is actually encrypted, has antiroll back "1", twrp already installed (twrp-3.3.1-2-davinci-fix).
Lately I've tried:
1. twrp format data, typed "yes"
2. copied rom, installed
3. reboot to recovery, and flashed magisk
and bootlooped...
I also would like to have hasty kernel and try new 82hz dtbo... If you be soo kind, you can suggest me how to do it also.
Thank you
Click to expand...
Click to collapse
Format data with yes
Reboot to recovery
Flash the rom
Clear cache/dalvik
Don't flash the Magisk right away
Sent from my Mi 9T using XDA Labs
welder73 said:
Format data with yes
Reboot to recovery
Flash the rom
Clear cache/dalvik
Don't flash the Magisk right away
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
okay! soo i'll flash magisk later, after first configuration, and what about hasky kernel and dtbo?
rapids said:
okay! soo i'll flash magisk later, after first configuration, and what about hasky kernel and dtbo?
Click to expand...
Click to collapse
Flash kernel after first setup too...if anything goes wrong, just flash the rom over.
About dtbo, I don't use it, follow the instructions in that thread...
Sent from my Mi 9T using XDA Labs
okay, i managed successfully xiaomi eu stable V11.0.6.0 and magisk.
Now can sombody advice me how exacly should I install "Hasty-davinci-Intoxicated-r3" and "VendorOverclockPackV2" (from topic: https://forum.xda-developers.com/mi-9t/themes/screen-overclock-mode-t4079693/page33 )
to get more then 66hz refresh rate?
Oh, and my phone is now actually encrypted...
I know it's something like:
1. mount vendor if isnt
2. backup boot, dtbo and vendor
3. flash VendorOverclock V2.img (without reboot)
4. install hasty kernel (without reboot)
5. flash oc dtbo file (without reboot)
6. install magisk (without reboot)
would it be ok?

Categories

Resources