HI all, i've a really disappointing problem. My touch HD was in my pocket when I took some rain on my motorcycle . Arrived at home the phone was off. I opened it following the service manual. I've putted it behind the power supply of the pc, where the warm air comes out, dismantled, for a few days.
Then I assembled all, and now it turns on, but, it randomly restart. Do you think my mobo is broken? some contact?
I was thinking I can sell the various parts of my phone all the items works, sim, sd reader, camera (back and front) except the mobo ofcourse.
thanks in advance for your help
Hi.I have heard of one way of fixed water damaged devices and that is by putting them in a container covered by UNCOOKED rice. I think the rice is meant to draw the water out. Leave it for a day I think. Never tried it myself but heard it works
Phil G
Hi, thanks for your answer, the phone was behind the psu of the pc for a week totally dismantled, so I think is pretty dry
thanks again for you interest
I actually dropped me BS in a bucket of water. Dried it out in a heat cabinet at work (50 deg C) for a day and it works perfectly still
Hi la3bna, i'm trying to do as you suggested, was your bs powered when it fall in the water?
thanks for your answer
You should use the salt that is used to lower humidity (e.g. from Bison).
Put the bag of salt on the bottom of a plastic box.
On top of the bag a plate so your device has no fysical contact
with the salt. On the plate you lay down your device without
the backside. Seal the box airtight and leave it there for 7 days.
I did this with the Ipod of my son which had been washed for over
an hour on 60 degrees celsius. The Ipod was dead, but after the
procedure as described it was fully functional!
Thanks a lot, I'll try this!!
Yes mine was on, actually someone called my when it fell
I dropped mine in deep snow... I was holding it in my hand and slipped and also fell
It was very wet so I got scared it won't work but when I got home I turned it off,removed the battery,cards and just put it in some blanket to dry off
After an hour turned it back on and everything worked just like before
Also the other day I accidentally spilled some hand cream on my blackstone and it got inside but nothing happened again so I'm lucky...
thanks for your advices, trying the rice thing
lol, you guys are fecking useless
There is no way I would put myself in that situation, then again I have dropped it a few times so probably only lucky there wasnt water about
Well, I also dropped my Blackstone into water and, after drying it for some 2-3 hrs in the sun it works, except the memory card reader - the problem with the water and mobile phones is the fact that the water is oxidizing the circuitry - so, if it still malfunctions after a week of drying, then probably the phone is doomed.
Sorry for your loss!
for oxid, i've "bathed" the phone in Svitol, but nothing appens... i'm going to sell it as spare.
thanks all for your answer
open the device and dry it out..
already tried, using the service manual to open it, and dried for a week, but nothing appens.
thanks anyway
keep pressing the on/off button - eg, press button on off on off on off (while charging)
and tell me what happens, eg, a vibration??
hi, ti vibrate, then starts, show the smart mobility screen, load the SO, and all works for about 10 minutes. Then the phone restarts and get stuck to smart mobility screen. After that the only way is to press reset or remove the battery. After that if you press the power button the phone get always stuck on smart mobility, sometimes start to load the SO and then it restart before finishing to load.
Nicola
Solved
Hi, problem solved, just left the phone in its box for a month then acidentally tried to start it and from that day works great... guess that just needed to dry out.
Thread can be closed.
Thanks for all your advice.
Nicola
The end?
Dropped my Blackstone in the toilet last night (don't know how, I was drunk at the time). I believe it had been fully submerged for 2-3 minutes. It was turned on at the time. When I recovered it (thank God nothing had been done in the toilet at the time), it was off. I removed the cover and there was water behind the battery, in the SD card reader and SIM. Not a lot, but it was wet. Stupidly (drunk) and panicking , I dried off the back panel with a hand towel (possible static charge damage? - not yet known ). I left it on top of a t-shirt which is on top of the radiator. I don't yet want to turn it on fo fear of wrecking it (if it's not already wrecked).
What methods to people recommend I should take from above? Or maybe there are some new techniques? Would I be better taking it to a mobile service repair shop to see if they can fix it from the beginning, before I do any more damage?
1 dismantle the device into pieces. (if your not sure how i can give you a step by step guide)
2 now dry each of the parts of the device with cotton wool buds (the things used to clean your ears)
3 the put the device back together.
4 done.
....some people say to leave the device in rice etc because it draws the water from the device, IMO this does not work properly and there is nothing better that opening the device and actually cleaning it and removing the water yourself, and this should only take a few mins. it is also not recomended to send it to a service repair shop for something you can do yourself. just be carefull when dismantling the device. do not break any ribbons - used to connect the lcd amungst other things to motherboard.
might be possible you will need a new battery ^
I went swimming a couple of days back and i forgot that i had my HD2 inside my packet, the phone got wet and now when i try to turn it on i see the buttons lighting up but a black screen...what should i do?
My HD2 had been very wet once,so we are on the same boat. You should never turn on your phone while it is still wet. Take out the batt, flush it with some denatured alcohol if you have some(this is recommended as it removes impurities left behind,like Chlorine.It also dries out any remaining water much faster than normal drying).If you do not have that, just run it under tap water for half a minute. Unscrew your phone so that at least the housing is separated. If you want, you can unscrew all the different modules. Submerge all those parts into a container of uncooked rice or silica gel. The phone should be completely covered. Leave it to dry for 5-7 days. Then, attempt to turn your phone on and test to see if everything is fine. If you cannot power up your phone at all, you might wanna try a new battery, as the battery might be broken. My HD2 worked perfectly,save for the mic. If yours does not work, you might want to order those water indicator stickers and the warranty void stickers from aBay and replace the current stickers,then send it for repair or submit a claim from insurance.hope this helps and i wish you good luck in reviving your phone.
Hey guys,
so, I was filming underwater when suddenly my phone told me that I ejected my SD card ( which saved the life of it), so I thought it could be water and ran out of the water as fast as I could and took out the battery.
Note: Qi charge seems to be a bad idea...
Well.. after drying it and repairing the SD card in windows everything is working fine, except the notification LED, it won't work in *#0*#, not while charging, not while booting and so on.
I saw that opening a galaxy s5 is pretty hard, so does anyone got an idea for another solution ? Now, that i don't have it anymore I feel how useful it is.
And can i buy this notification LED piece anywhere?
Using the hair dryer...
Use the hair dryer to blow at the phone and dry it completely before turning it on.
I recently got my note 3 wet (clean-ish lake water) and immediately got the battery out and the phone dissasembled and into a bag of rice.
after a few days I reassembled it and booted it up and I can hear the startup sounds, feel the vibrations from power up, reboot & charge and I also can hear all of my notifications including ringing calls.
The problem is I cannot get the screen to turn on*.
What happens is the back button and menu button led's light up at the bottom and the screen sometimes flickers. I have got the screen to turn on though really rarely (playing with it and removing/readding the battery, rebooting etc..) and when I DO get it to turn on all functions work perfectly as if the phone was never damaged.
My question is, what components can I take a closer look at that would cause this behaviour? I would say that the screen is kaput but when it turns on everything works....
I am asking here as my google fu has not dredged up anyone with this specific problem before.
I have cleaned what appears to be corrosion or water spots on the larger copper traces on the mainboard with 99% iso and dried then reassembled but no change in behaviour (it did turn on once after I did this and work).
I tried a new OEM battery, no change.
Any and all advice is appreciated and yes I will order a waterproof quality case if I can get it working again
aridhol said:
I recently got my note 3 wet (clean-ish lake water) and immediately got the battery out and the phone dissasembled and into a bag of rice.
after a few days I reassembled it and booted it up and I can hear the startup sounds, feel the vibrations from power up, reboot & charge and I also can hear all of my notifications including ringing calls.
The problem is I cannot get the screen to turn on*.
What happens is the back button and menu button led's light up at the bottom and the screen sometimes flickers. I have got the screen to turn on though really rarely (playing with it and removing/readding the battery, rebooting etc..) and when I DO get it to turn on all functions work perfectly as if the phone was never damaged.
My question is, what components can I take a closer look at that would cause this behaviour? I would say that the screen is kaput but when it turns on everything works....
I am asking here as my google fu has not dredged up anyone with this specific problem before.
I have cleaned what appears to be corrosion or water spots on the larger copper traces on the mainboard with 99% iso and dried then reassembled but no change in behaviour (it did turn on once after I did this and work).
I tried a new OEM battery, no change.
Any and all advice is appreciated and yes I will order a waterproof quality case if I can get it working again
Click to expand...
Click to collapse
You acted perfectly after getting the phone wet, so congratulations. But unfortunately, screen failures are fairly common in phone-wetting scenarios.
What you can do is try keeping the phone a couple of days more in silica gel bags/rice to see if there still is moisture in the screen assembly. If nothing changes, all you can do is replace the whole screen assembly.
totalnoob34 said:
You acted perfectly after getting the phone wet, so congratulations. But unfortunately, screen failures are fairly common in phone-wetting scenarios.
What you can do is try keeping the phone a couple of days more in silica gel bags/rice to see if there still is moisture in the screen assembly. If nothing changes, all you can do is replace the whole screen assembly.
Click to expand...
Click to collapse
Can the screen be submerged in isopropyl 99% to displace any water or will that damage it?
aridhol said:
Can the screen be submerged in isopropyl 99% to displace any water or will that damage it?
Click to expand...
Click to collapse
Alcohol should be harmless. Go for it, you have nothing to lose.
I think you should put your phone in sun light for 40 minute without battery. after that let you phone cool. then Try to boot.If not work then open that back part then try again for more 30 minutes. I think it will help you.
in my case it works on samsung galaxy s.
God bless you & your phone.
Hello,
I recently dropped my S6 Edge plus in a bucket of water.....I immediately put it in a bag with rice..... after 24 hours I took it out. It was responsive but the colors were not displayed correctly. Back into the rice for another 24 hours...took it out everything worked fine.
2 or 3 days later I shut the phone off, and the next day when I turned it back on, it booted up but the touch screen is unresponsive.
I was able to use ADB and Fastboot once on the phone and restored it to factory settings.....now I cannot even connect to the phone. By doing the restore it reset, so allow debugging or using and unregistered apps is back to stock etc.
The Hard reset volume up+home+power does not go to the rest settings....it just keeps showing the Samsung S6 Edge logo.....screen goes off to black ....and the S6 Edge Plus Logo back again...looping each time.
Ayone have any suggestions I can try?
You could try giving it an alcohol bath, otherwise put it back in rice and hope you didn't short anything out
Alcohol Bath?
How would I do this?
jtcnb said:
Alcohol Bath?
How would I do this?
Click to expand...
Click to collapse
I Recommend you take it into aparts... Put the mainboard into a box filled with Alcohol take it out and clean it gently with a toothbrush or something similiar then leave it in the box until alcohol is gone... dont put too much in the box just as this that the board will be completely swim in it...
If that wont work the Amoled has also a flex cable wit some electronic on it clean that also.
And remember no water is 100% clean so just put it in rice is not a lifetime deal always clean with alcohol.
Wow.....I seen some videos of the breakdown of this phone.....seems pretty intense.
I may just put it on Kijiji or Ebay and sell it for parts
Had a person do this for me, and the LCD was damaged,