HI all, i've a really disappointing problem. My touch HD was in my pocket when I took some rain on my motorcycle . Arrived at home the phone was off. I opened it following the service manual. I've putted it behind the power supply of the pc, where the warm air comes out, dismantled, for a few days.
Then I assembled all, and now it turns on, but, it randomly restart. Do you think my mobo is broken? some contact?
I was thinking I can sell the various parts of my phone all the items works, sim, sd reader, camera (back and front) except the mobo ofcourse.
thanks in advance for your help
Hi.I have heard of one way of fixed water damaged devices and that is by putting them in a container covered by UNCOOKED rice. I think the rice is meant to draw the water out. Leave it for a day I think. Never tried it myself but heard it works
Phil G
Hi, thanks for your answer, the phone was behind the psu of the pc for a week totally dismantled, so I think is pretty dry
thanks again for you interest
I actually dropped me BS in a bucket of water. Dried it out in a heat cabinet at work (50 deg C) for a day and it works perfectly still
Hi la3bna, i'm trying to do as you suggested, was your bs powered when it fall in the water?
thanks for your answer
You should use the salt that is used to lower humidity (e.g. from Bison).
Put the bag of salt on the bottom of a plastic box.
On top of the bag a plate so your device has no fysical contact
with the salt. On the plate you lay down your device without
the backside. Seal the box airtight and leave it there for 7 days.
I did this with the Ipod of my son which had been washed for over
an hour on 60 degrees celsius. The Ipod was dead, but after the
procedure as described it was fully functional!
Thanks a lot, I'll try this!!
Yes mine was on, actually someone called my when it fell
I dropped mine in deep snow... I was holding it in my hand and slipped and also fell
It was very wet so I got scared it won't work but when I got home I turned it off,removed the battery,cards and just put it in some blanket to dry off
After an hour turned it back on and everything worked just like before
Also the other day I accidentally spilled some hand cream on my blackstone and it got inside but nothing happened again so I'm lucky...
thanks for your advices, trying the rice thing
lol, you guys are fecking useless
There is no way I would put myself in that situation, then again I have dropped it a few times so probably only lucky there wasnt water about
Well, I also dropped my Blackstone into water and, after drying it for some 2-3 hrs in the sun it works, except the memory card reader - the problem with the water and mobile phones is the fact that the water is oxidizing the circuitry - so, if it still malfunctions after a week of drying, then probably the phone is doomed.
Sorry for your loss!
for oxid, i've "bathed" the phone in Svitol, but nothing appens... i'm going to sell it as spare.
thanks all for your answer
open the device and dry it out..
already tried, using the service manual to open it, and dried for a week, but nothing appens.
thanks anyway
keep pressing the on/off button - eg, press button on off on off on off (while charging)
and tell me what happens, eg, a vibration??
hi, ti vibrate, then starts, show the smart mobility screen, load the SO, and all works for about 10 minutes. Then the phone restarts and get stuck to smart mobility screen. After that the only way is to press reset or remove the battery. After that if you press the power button the phone get always stuck on smart mobility, sometimes start to load the SO and then it restart before finishing to load.
Nicola
Solved
Hi, problem solved, just left the phone in its box for a month then acidentally tried to start it and from that day works great... guess that just needed to dry out.
Thread can be closed.
Thanks for all your advice.
Nicola
The end?
Dropped my Blackstone in the toilet last night (don't know how, I was drunk at the time). I believe it had been fully submerged for 2-3 minutes. It was turned on at the time. When I recovered it (thank God nothing had been done in the toilet at the time), it was off. I removed the cover and there was water behind the battery, in the SD card reader and SIM. Not a lot, but it was wet. Stupidly (drunk) and panicking , I dried off the back panel with a hand towel (possible static charge damage? - not yet known ). I left it on top of a t-shirt which is on top of the radiator. I don't yet want to turn it on fo fear of wrecking it (if it's not already wrecked).
What methods to people recommend I should take from above? Or maybe there are some new techniques? Would I be better taking it to a mobile service repair shop to see if they can fix it from the beginning, before I do any more damage?
1 dismantle the device into pieces. (if your not sure how i can give you a step by step guide)
2 now dry each of the parts of the device with cotton wool buds (the things used to clean your ears)
3 the put the device back together.
4 done.
....some people say to leave the device in rice etc because it draws the water from the device, IMO this does not work properly and there is nothing better that opening the device and actually cleaning it and removing the water yourself, and this should only take a few mins. it is also not recomended to send it to a service repair shop for something you can do yourself. just be carefull when dismantling the device. do not break any ribbons - used to connect the lcd amungst other things to motherboard.
might be possible you will need a new battery ^
Related
Good day...
Some idiot sat on my bag which contained mineral water. My mineral bottle blew open and the water inside spilled inside my bag. Unfortunately for me, my cellphone was at the bottom of my bag. During that time, I was listening to mp3s through a2dp. A minute later, the idiot told me that something in my bag spilled. Then, I noticed my bag was wet. Then a 10 seconds later, I realized my phone was inside my bag.
Long story short, my phone was working well, then the mp3s starting skipping like crazy, so I turned off my phone. Once I got home 20 minutes later, I blow dried the outer shell and the battery area and it was seemingly dry. Now I turned my phone on and it had some problems at first. The backlight wasn't lighting all the time until I went to the backlight settings.
Now my problem is that my screen is slightly flickering when the backlight is on. If I open my wizard with the help of the service manual, do you think I'll be able to solve this problem?
Okay, now the thing works again... However, now I am paranoid about it. Should I dry bake it and how do you dry bake? The only thing I did right now was to blow dry the hell out of it. I plan on getting that star shaped screw driver tomorrow, for a thorough cleansing. The touch screen seems to be damaged on the right side.
I'm not sure dry baking it is going to help now. If your phone is wet at all you should remove the battery immediately until you know that the phone is completely dry. To dry bake it though, rmove the battery and turn your oven on its lowest setting and then pop it in there for a few hours and it should be good to go after that. I'm guessing any damage that has been done to it already might be permanent. Maybe you'll get luck though and it isn't.
I would advise against baking it. My Cing 8525 has fallen into water TWICE now; the trick is to immediately shut it down, remove the battery, and allow the phone to thoroughly dry. I took a can of compressed air and blow dried my phone the first time; I then let it sit for several days open with the battery out (thought it was dead) but then decided to give it another try and it worked fine. Has continued to work well even after the second dunking but then I was in Africa and it was 118 degrees so didn't take long to dry.......
Baking the phone just increases your risks of overdoing or doing something wrong....
I left my phone outside before a rainstorm. It didn't get get direct rainfall on it but got the spray of the water hitting the side of the wall. When I remembered it 15 minutes later it was covered in water drops but not soaked.
Everything seemed to work fine at first but then the touchscreen kept thinking it was touched at random places.
I turned it off, removed the battery, and started to dry it off with a kleenex and a condensed air can to blow the water out of the slider. When I turned it back on, the backlight flickered for about a minute and then went black (the LCD picture was still there but very dark)
Now when I turn it on the backlight is on for a second but then goes off. If I hit the OK, Talk, or other buttons they work 1 out of 10 times. The touchscreen still registers hits by itself.
Any suggestions on what I should do to dry it out? Do I need to take apart the screen?
I'd hate to throw it away...any help will be much appreciated!
Hum ill try to say this in english. This solution worked for some friends of mine when their phones got wet. disassemble all the tytn parts, take pff the battery, sim card, memory card, everything u can, take it out. Then with a hairdryer point it to the PDA about an hour. Pay attention not burn it up, only heat it a little so that the water or humidy left in the PDA can evaporate. Then leave it on shelf all opened for about a night. Next day join all the parts and try to connect your device. If it doesnt work, u can always take it to warranty. Sry 4 my english I hope u can understand ^^
Zero|Cool said:
Hum ill try to say this in english. This solution worked for some friends of mine when their phones got wet. disassemble all the tytn parts, take pff the battery, sim card, memory card, everything u can, take it out. Then with a hairdryer point it to the PDA about an hour. Pay attention not burn it up, only heat it a little so that the water or humidy left in the PDA can evaporate. Then leave it on shelf all opened for about a night. Next day join all the parts and try to connect your device. If it doesnt work, u can always take it to warranty. Sry 4 my english I hope u can understand ^^
Click to expand...
Click to collapse
Hey don't worry about your English - you speak it better than most others. I'll try this suggestion but I will definitely have to be careful not to burn up anything. Thanks
After the experience tell me how it went
Forget warranty though, there is a water activated sticker inside the hermes to tell the service department if its been soaked. Its white if no water has got in but turns pink if water touches it.
Cheers...
Heres the link to the service manual to be able to dissassemble safely - http://michael-channon.spaces.live.com/PersonalSpace.aspx?_c02_owner=1
You need a small flatbade, a small philips head screwdriver and a no. 6 torque key.
Good luck....
The warranty's already gone so I am willing to take drastic measures to fix this thing. I will let it sit overnight and if that doesn't work, I'll be taking it apart tomorrow. I found a youtube video that shows precisely how to do it. I'll update tomorrow
Would grab the manual as well as it can't hurt to have all bases covered. The manual takes you through step by step.
Cheers...
Thanks for your help, guys!
Seems I was freaking out over nothing. I did like Zero said and took a hair dryer to it (maybe 3mins on low -- 1min on high....did have the patience to do it for an hour) and then let it sit overnight. The phone was completely messed up around 10pm last night even after blow drying but this morning I powered it on and it did just fine. It did reset a couple of settings in advanced config but nothing else was touched. As a matter of fact, I believe the phone runs faster than it did before the incident! I do notice that the CPU memory is idling at 45% instead of 55+%...weird....
So I guess they do make em like they used to
Im glad my solution worked out actually i never tested it on PDA's so i guess that it's quite the same. Hair dryer rullez^^
check your wifi
mcattack86 said:
Thanks for your help, guys!
Seems I was freaking out over nothing. I did like Zero said and took a hair dryer to it (maybe 3mins on low -- 1min on high....did have the patience to do it for an hour) and then let it sit overnight. The phone was completely messed up around 10pm last night even after blow drying but this morning I powered it on and it did just fine. It did reset a couple of settings in advanced config but nothing else was touched. As a matter of fact, I believe the phone runs faster than it did before the incident! I do notice that the CPU memory is idling at 45% instead of 55+%...weird....
So I guess they do make em like they used to
Click to expand...
Click to collapse
I had an MDA before my Wing, dropped in the toilet twice after a couple of days worked fine the second time the wifi went out.
PS My wing doesnt go in the bathroom with me anymore
When you phone gets wet
I don't know if anyone has heard of the Kim Commando Show, she is syndicated over the Radio. Anyways, she's a techie and gives advice on different situations relating to different devices and new stuff coming out. Anyways, she advices when a phone get wets to NOT turn on the phone right away (obviously), take the battery out and put the phone in a bag of rice. The rice will pull out the moisture. The phone has to be in the rice for 24 hours. It works 95% of the time. The trick is to not turn on the phone until you are sure the phone is completly dry inside and out. As you all know, electricity and water will just fry your phone. A new battery is suggested.
water damage SGS2 also..
Got my Galaxy s2 in my pocket when it was raining , i hade about 10% of battery.
Took it up and it was dead, so when i came home i put the charger in it but nothing happend.
I have put it into a bag of rise now and will se if it starts tomorrow. I also have bought a new battery.
if that not works ive also bought a new Charger oem cabel from ebay.
to bad for me did the warrenty went out for about 3 weeks ago.
I hope it will turn on again when i read that people that have droped directly into water and have them fixed by rise or other ways.
If this not works, is there any other ways?
thankfull for any help!
Ok so my JasJam was in my bag and my water bottle leaked onto it. Thing is I didn't realise that it was wet for at least a couple of hours.
When I picked it up it had turned off because there was all this grime in between the battery terminals. I took the battery out and almost cried.
This is how to fix a water damaged JasJam...
1. Buy a can of CO contact cleaner.
2. Pull the entire phone apart.
3. Spray cleaner on the board and inbetween all contacts and scrub with a toothbrush.
4. Leave to dry for a day or so.
5. Put battery back in and turn on phone.
Ok so at this point the screen didn't turn on and none of the lights came on so I almost cried again. But then I noticed that when I flipped the keyboard out the keyboard lit up! So I held the power button in to turn the phone off and it made that beep that it makes when it asks you if you want to turn it off. My JasJam was still alive, it... just...couldn't see!
Ok so if your screen doesn't come back on follow the next steps...
6. Get a new screen or buy a faulty JasJam off ebay.
7. Take it apart and replace screen.
After replacing the screen try switching it on agian. Mine switched on! But the backlight wasn't working...?!? Go to the next step...
8. Replace the scroll wheel circuit board.
Done, my JasJam now works again! A very happy day!
is there any way to "bypass" the scroller? mine did the same thing but cant really afford a new scroller circuit or dead imate.
Rubbing Alcohol and Rice!
I always fix water damage with rubbing alcohol and rice...
Take the phone apart, soak the FEY layers (the green layers with all the circuitry) in rubbing alcohol, take it out, toothbrush it, put it into your oven at about 350 for like 3 minutes, take it out and place it into a cup of rice for 24 hours. Don't worry, it won't melt because the silicon and iron melting points are really high! And the rice just sucks all the moisture out of anything!
Good Luck!
Didn't find a workaround for the scroll wheel, you'll need to replace...
Hi guys unfortunately my HD was in a drawer during night and in the morning i found it soaked with water under the battery and both cards. I was in hospital so probably the infusion hose is the reason. I tried standart drying and isopropyl but it behaves like the "volume down" button is permanently pressed and my screen flashes touchFlo/volume. When i try to power it on by pressing power button it gets in bootloader. I must press both volume and power buttons together for a while to turn it on. Everything except the button is fine. I am stuck with that and warranty doesn´t repair water damage. I don´t want to disassemble it because it´s new only few weeks. Any idea please? Thanks
That realy sucks dude!
I've had experience with a Touch Cruise that got dropped in a bucket filled with water. After drying it for three days it actually worked (even till this day).
Don't think there is much hope for your device since it was covered with a fluid for a longer time. This also means that there is quite a big chance that the battery caused some short circuit in the device.
My advice is to remove the battery and let the device dry for a few days.
Also, never use a damaged battery, get a new one.
Try the submerging it in dry rice trick, the rice should help to absorb the moisture inside the device. @ this juncture it can't hurt to try.
Leave it for a couple of days before turning it on.
Hey everyone,
I am an avid runner and I use RunKeeper on my phone to track my runs. Last night I was running in a gym, and got really hot... My armband was soaked in sweat, and my volume buttons started malfunctioning.
When I restarted the phone, it went straight into bootloader mode as if the volume down key was pressed.
Anyway, as I read in these forums, I placed the phone in a bowl of raw rice, and it stayed there all night so it can absorb the moisture.
This morning I can boot into Android, but my volume keys still don't work. Whether I press Vol + or Vol - it works as if I'm pressing Vol -. So my Legend immediately goes to silent mode.
Anyone had problems with a wet Legend? Should I leave it in the bowl for a longer period? (I guess I'm too impatient since I'm using my old crappy phone right now) Do you think it's permanently damaged?
sveon said:
Do you think it's permanently damaged?
Click to expand...
Click to collapse
Chances are it's already too late to fix. You can try taking the battery/sim/sdcard out and chucking the phone in a bowl of rice for a couple of days or so, but at this point I don't think it's possible to repair.
I hope your Legend is still under warranty. |:
The problem is probably not the humidity itself, but the salts in the water from the sweat. Salt water often leads to short-circuits in electronics. The salt stays in the phone, even after the water has evaporated.
If you don't get it running again, you could try turning off the phone, removing the battery and washing it in sterilized water (full submerging for an extended time and move it around or leaving it under running tap-water for some minutes while you rotate it.
You should then open all lids and let the phone dry out in a warm and dry place for some days before trying it again.
I did this for my phone. At first the speaker, buttons and vibrator didn't work, but they came around after a few days. Good luck!
@jawil, that sounds very extreme... My phone is working except the volume up/down buttons. They are kinda malfuctioning, but I installed a widget to control volume settings.. I was also thinking about the salts.
It's still under warranty, and I was wondering if they will accept it. My service center told me a repair might take a couple of weeks, and I really can't go without my Legend now, so I thought I'd wait a while.
DON'T WASH IT IN TAP WATER!!! Even if it worked for a while the minerals in the tap water would eventually build up on the circuit board a make the phone malfunction you could take it apart and clean it with pure alcohol.
Sent from my HTC Legend using XDA App