Related
Hi, I have recently installed COS 13 SNAPSHOT build and was working fine. I have restarted my phone and got stuck in a boot loop so I have installed latest COS 13 nightly after which fingerprint menu disappeared totally . I have installed turbo ROM after that (after wiping cos nightly) still no fingerprint menu. Anyway to restore the get it working .
getmmg said:
Hi, I have recently installed COS 13 SNAPSHOT build and was working fine. I have restarted my phone and got stuck in a boot loop so I have installed latest COS 13 nightly after which fingerprint menu disappeared totally . I have installed turbo ROM after that (after wiping cos nightly) still no fingerprint menu. Anyway to restore the get it working .
Click to expand...
Click to collapse
Just some ideas I have. Did you install mm firmware?
Otherwise, I have had FP menu disappear twice in the past. Both times it was after my FP sensor was exposed to some water, so essentially it was compromised. Maybe yours was damaged? I tried wiping and flashing and reflashing different ROMs and firmware and it came back about a week later. I believe the FP sensor finally dried and the water was gone from in there so it worked again. So I think when the sensor is damaged it is removed from settings as if it is not there.
Hope this helps.
Try cleaning credentials, maybe this helps.
JonnyAw said:
Just some ideas I have. Did you install mm firmware?
Otherwise, I have had FP menu disappear twice in the past. Both times it was after my FP sensor was exposed to some water, so essentially it was compromised. Maybe yours was damaged? I tried wiping and flashing and reflashing different ROMs and firmware and it came back about a week later. I believe the FP sensor finally dried and the water was gone from in there so it worked again. So I think when the sensor is damaged it is removed from settings as if it is not there.
Hope this helps.
Click to expand...
Click to collapse
What is mm firmware? I haven't installed it. I have installed twrp and flashed cos nighties on top.
getmmg said:
What is mm firmware? I haven't installed it. I have installed twrp and flashed cos nighties on top.
Click to expand...
Click to collapse
MM firmware is the driver package for marshmallow (android 6.0), it allows you to use fingerprint sensor. On the list of things to install for turbo rom Ordenkreiger did not put that you have to install it but it is required for fp sensor. If you check other cm13 based roms here most will be explicit about installing it.
Here is the link for the firmware for our device, just flash it before installing the roms and FP will work: https://www.androidfilehost.com/?fid=24533103863141329
It only needs to be installed once and then you never worry about it when installing other marshmallow roms. That is the same link given in other threads for our Zuk. Hope it works!
Tried flashing mm-firmware but still no fingerprint menu in setting.
does this works for nougat?
JonnyAw said:
MM firmware is the driver package for marshmallow (android 6.0), it allows you to use fingerprint sensor. On the list of things to install for turbo rom Ordenkreiger did not put that you have to install it but it is required for fp sensor. If you check other cm13 based roms here most will be explicit about installing it.
Here is the link for the firmware for our device, just flash it before installing the roms and FP will work: https://www.androidfilehost.com/?fid=24533103863141329
It only needs to be installed once and then you never worry about it when installing other marshmallow roms. That is the same link given in other threads for our Zuk. Hope it works!
Click to expand...
Click to collapse
or any alternative for nougat..
Goku027 said:
or any alternative for nougat..
Click to expand...
Click to collapse
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Try nuclear ROM 1.0.1 beta no issue with finger print and calling no bug for zuk z1
Goku027 said:
or any alternative for nougat..
Click to expand...
Click to collapse
I serch in google and found this file for Nougat:
https://www.androidfilehost.com/?fid=745425885120705241
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
thanks..it worked.
scraptchatella said:
I serch in google and found this file for Nougat:
https://www.androidfilehost.com/?fid=745425885120705241
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
Click to expand...
Click to collapse
now my fingerprint sensor is back.
scraptchatella said:
I serch in google and found this file for Nougat:
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
Click to expand...
Click to collapse
Thanks a lot, worked for me too, after flashing lineage os from cos 12 my finger print option disappeared too. Luckily I found this now every thing works again!
I had the same problem. And tried all the available options like updating mm firmware, Going back to COS 12.1, CM 13, LOS 14.1.... Nothing really worked. For some time finger print worked in COS12.1 and after a while it malfunctioned, and vibrated continuously. Then I have taken to the service center. There they have replaced the whole screen.( dont know the exact reason and the person delivered the mobile is too noob to ask). So what I mean is it is a hard issue upto my knowledge. If your mobile is covered in warranty, give it a try..
This file only makes a penguin logo appear when I boot my rr ROM. Did not provide the finger print option. Hope this does not mess with my phone. Is there any way to remove this thing I flashed?
lineage-14.1-20171031
I cannot find the fingerprint menu. Where should it be? The setup was interrupted and now I cannot find it.
Radhouene90 said:
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Click to expand...
Click to collapse
Well my mic also not works in case i am recording but when i receive a call and put it on loudspeaker it works fine...
Anyone can tell what is that problem??
highdude said:
Well my mic also not works in case i am recording but when i receive a call and put it on loudspeaker it works fine...
Anyone can tell what is that problem??
Click to expand...
Click to collapse
this could be a software problem, what ROM are you using ?
As for my fingerprint, i changed it , it's working ..
Radhouene90 said:
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Click to expand...
Click to collapse
Got my fingerprint working with the Dead Unicorns ROM, while it didn't work with lineage and nuclea.
lg-optimus said:
Got my fingerprint working with the Dead Unicorns ROM, while it didn't work with lineage and nuclea.
Click to expand...
Click to collapse
i tried it but id does not worked , so i bought a new one from ebay
Radhouene90 said:
this could be a software problem, what ROM are you using ?
As for my fingerprint, i changed it , it's working ..
Click to expand...
Click to collapse
I haven't changed my rom yet
My phone isn't even rooted
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
highdude said:
I haven't changed my rom yet
My phone isn't even rooted
Click to expand...
Click to collapse
And i wanna root my phone any suggestions how to do that
Just got a notification tonight about downloading and updating my Sprint HTC 10 to 2.51.617.2.
Has anyone received this update yet? I'm unlocked with Magisk root and don't want to go thru the update if it's going to break Safetynet (again!).
I got the notification too, but I have not allowed it to go in so far.
The update is actually 2.51.651.2 and is July 2017 security update. I did it yesterday without issues.
costy11 said:
The update is actually 2.51.651.2 and is July 2017 security update. I did it yesterday without issues.
Click to expand...
Click to collapse
It is only the security updates? It is 802MB! That is a lot of security! I doubt it would go in on mine anyway as I have too many system modifications.
lexridge said:
It is only the security updates? It is 802MB! That is a lot of security! I doubt it would go in on mine anyway as I have too many system modifications.
Click to expand...
Click to collapse
And "Performance enhancements" too, whatever they may be, as it had no further details on them.
For me, it broke the fingerprint sensor. It now works to unlock the phone only within the first 5 minutes or so after turning it off. After that, I have to use the pattern. It's like the sensor gets disabled during low-power suspend, but turning the screen on doesn't wake it back up. This started immediately after I received the update.
costy11 said:
The update is actually 2.51.651.2 and is July 2017 security update. I did it yesterday without issues.
Click to expand...
Click to collapse
We're you able to take the OTA with root and/or TWRP? Have you experienced any adverse effects?
radji said:
We're you able to take the OTA with root and/or TWRP? Have you experienced any adverse effects?
Click to expand...
Click to collapse
I took it OTA. I just got the phone a month ago and have only sim unlocked it, no root or twrp. Everything seems to be working fine still since the update.
I was unable to take the update with root and TWRP.
hegemon13 said:
For me, it broke the fingerprint sensor. It now works to unlock the phone only within the first 5 minutes or so after turning it off. After that, I have to use the pattern. It's like the sensor gets disabled during low-power suspend, but turning the screen on doesn't wake it back up. This started immediately after I received the update.
Click to expand...
Click to collapse
Anyone else experience this? I'm a bit hesitant to do the update if this is a real problem.....
Sent from my 2PS64 using Tapatalk
DNarsingh said:
Anyone else experience this? I'm a bit hesitant to do the update if this is a real problem.....
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
I'm interested to know, too. Is it a fluke or coincidence that I might fix with a factory reset, or is anyone else seeing the same thing? If I'm going to reset anyway, might be time to go ahead and root it.
DNarsingh said:
Anyone else experience this? I'm a bit hesitant to do the update if this is a real problem.....
Click to expand...
Click to collapse
It happened to mine. Sometimes the scanner works, most times it doesn't.
Anyone know where I can get the 2.42.651.63 recovery to flash? I want to take the OTA but I did not backup the stock recovery when I flashed TWRP after the last update.
radji said:
Anyone know where I can get the 2.42.651.63 recovery to flash? I want to take the OTA but I did not backup the stock recovery when I flashed TWRP after the last update.
Click to expand...
Click to collapse
look in the firmware/RUU thread? https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257
DNarsingh said:
Anyone else experience this? I'm a bit hesitant to do the update if this is a real problem.....
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
Same issue here. I really don't want to reset the device to find out if it helps. I was hoping yesterday's update, 2.5.651.11 would fix it but it didn't.
OMJ said:
look in the firmware/RUU thread? https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257
Click to expand...
Click to collapse
I downloaded the 2.42.651.63 firmware zip, but am unable to open it. 7-zip says its not a valid zip file.
Since manually installing this update, I can no longer change my SMS Notification sound using the stock SMS app.. No matter what I change it to, it still uses the default system sound. Any ideas how to fix this, without switching SMS apps?
lexridge said:
Since manually installing this update, I can no longer change my SMS Notification sound using the stock SMS app.. No matter what I change it to, it still uses the default system sound. Any ideas how to fix this, without switching SMS apps?
Click to expand...
Click to collapse
I tried everything from Sprint's based release. Fingerprint sensor issues everytime. On Leedroid's latest release. It's not firmware related, it's software. Something Sprint put in is messing with fingerprint sensor from sleep.
Sent from my 2PS64 using Tapatalk
Sad news for those who haven't heard yet. Wileyfox has called in the administrators.
http://www.theregister.co.uk/2018/02/07/wileyfox_goes_into_adminisitration/
https://www.reddit.com/r/wileyfox/comments/7vo3d4/wileyfox_has_entered_administration/
TTib said:
Sad news for those who haven't heard yet. Wileyfox has called in the administrators.
http://www.theregister.co.uk/2018/02/07/wileyfox_goes_into_adminisitration/
https://www.reddit.com/r/wileyfox/comments/7vo3d4/wileyfox_has_entered_administration/
Click to expand...
Click to collapse
Poop. I have a Swift 2 needing RMA [emoji24]
Sent from my Swift 2 Plus using Tapatalk
So that's it for future updates, I guess. Here's hoping there'll be a stable lineage release some day.
Buxbaum666 said:
So that's it for future updates, I guess. Here's hoping there'll be a stable lineage release some day.
Click to expand...
Click to collapse
There IS a stable lineage release. I'm currently running it! Check the roms section
carpenoctem1985 said:
There IS a stable lineage release. I'm currently running it! Check the roms section
Click to expand...
Click to collapse
Presumably he means an OFFICIAL Lineage OS release with OTA updates that is obtainable from the Lineage website as is the case with the original Swift. Without that we're stuck with out of date official Wileyfox firmware or an unofficial Lineage release.
Sent from my Swift 2 Plus using Tapatalk
Vygotsky said:
How stable is it though? What kind of problems do you run into? And is it updated frequently?
Click to expand...
Click to collapse
I've found it excellent up to now. Been using it for months. They tend to update it OTA when there's an android update. Had a problem ages ago that was a common bug (forget what it was now) but it's been fixed a long time ago.
Vygotsky said:
Thanks for the quick reply! The xda page says that fingerprint and nfc are not working. Is this still the case? I need nfc for banking...
Click to expand...
Click to collapse
The fingerprint works absolutely fine! I use mine to unlock etc. Only issue is that some apps (like my banking app) recognises the custom rom and won't allow fingerprint access. It still let's me log ok though. Nfc I'm not sure as I don't really use it. It's worked here and there when I've been playing with the phone but I can't comment extensively on that one.
carpenoctem1985 said:
The fingerprint works absolutely fine! I use mine to unlock etc. Only issue is that some apps (like my banking app) recognises the custom rom and won't allow fingerprint access. It still let's me log ok though. Nfc I'm not sure as I don't really use it. It's worked here and there when I've been playing with the phone but I can't comment extensively on that one.
Click to expand...
Click to collapse
My banking app allowed fingerprint access once I told magisk to hide from it. May help you if applicable.
GreatLordAnt said:
My banking app allowed fingerprint access once I told magisk to hide from it. May help you if applicable.
Click to expand...
Click to collapse
I've not yet played with magisk... Any quick guide links etc? I've heard it's pretty good!
If I'm honest I only installed it for root control that still allowed me to use android pay. Old root methods fail safety net. I just went to the magisk thread and went from there.
As far as lineage goes it has been rock steady for me.
Good news (I hope so)
http://www.mobilenewscwp.co.uk/2018/02/12/wileyfox-will-continue-despite-administration/
Abdullah S.A. said:
Good news (I hope so)
http://www.mobilenewscwp.co.uk/2018/02/12/wileyfox-will-continue-despite-administration/
Click to expand...
Click to collapse
Time will tell.
carpenoctem1985 said:
There IS a stable lineage release. I'm currently running it! Check the roms section
Click to expand...
Click to collapse
azcom said:
Presumably he means an OFFICIAL Lineage OS release with OTA updates that is obtainable from the Lineage website as is the case with the original Swift. Without that we're stuck with out of date official Wileyfox firmware or an unofficial Lineage release.
Click to expand...
Click to collapse
Indeed. Although I have since switched to lineage 14.1 and I am quite satisfied. No hassle to remove bloatware and it has a few features that I previously missed. OTA updates work, too. Finally no more waiting for official Wileyfox recovery images.
Buxbaum666 said:
Indeed. Although I have since switched to lineage 14.1 and I am quite satisfied. No hassle to remove bloatware and it has a few features that I previously missed. OTA updates work, too. Finally no more waiting for official Wileyfox recovery images.
Click to expand...
Click to collapse
I'm a bit leery of moving to Lineage because I'm afraid that I won't be able to use my banking apps on a rooted/non-original ROM.
dryhte said:
I'm a bit leery of moving to Lineage because I'm afraid that I won't be able to use my banking apps on a rooted/non-original ROM.
Click to expand...
Click to collapse
True concern... I have just had to go back to stock (and relock the B/L) from LineageOS as my Banking app updated to a greater security level. NOTHING fixed it and I tried everything.
LenAsh said:
True concern... I have just had to go back to stock (and relock the B/L) from LineageOS as my Banking app updated to a greater security level. NOTHING fixed it and I tried everything.
Click to expand...
Click to collapse
I'm lucky with my bank, app works fine with root, but I do need to hide root to use login with fingerprint.
GreatLordAnt said:
I'm lucky with my bank, app works fine with root, but I do need to hide root to use login with fingerprint.
Click to expand...
Click to collapse
I was until this week...! Cloaking methods are a no go.
There you go. Ridiculous but that's what will keep me on the OEM firmware.
Got the Pie update notice today along with January security patch. My question is for those who, like me, waited until the official notification to update.
With so many here experiencing problems with the previous update(s), it's hard to distinguish which threads are for it, custom, or for the latest Xiaomi update. Did you update to Pie in January? Are there any issues you've noticed with the update? Should I pull the trigger on the update or wait?
Any info is appreciated, as always.
Regards,
KB
I just directly installed January update, migrated from Oreo. Didn't face any issues as of yet.
By the way how do you guys turn on FM Radio?
No data since update.
I did the update earlier today and haven't been able to get mobile data since. Can anybody help me?
Barneyjp18 said:
I did the update earlier today and haven't been able to get mobile data since. Can anybody help me?
Click to expand...
Click to collapse
I downloaded my update with the mobile data and used it since right after. No problem. Wifi seems ok too.
Barneyjp18 said:
I did the update earlier today and haven't been able to get mobile data since. Can anybody help me?
Click to expand...
Click to collapse
That sounds like a serious issue, and one that makes me think I might just wait a bit on this update. Thanks for the feedback, and I hope you get the issue resolved. Where are you located?
KB_Thailand said:
That sounds like a serious issue, and one that makes me think I might just wait a bit on this update. Thanks for the feedback, and I hope you get the issue resolved. Where are you located?
Click to expand...
Click to collapse
I'm am located in Japan. Did the update while connected to wifi on WiFi. I never even questioned it as never had a problem in the 14months I have owned the phone.
Barneyjp18 said:
I'm am located in Japan. Did the update while connected to wifi on WiFi. I never even questioned it as never had a problem in the 14months I have owned the phone.
Click to expand...
Click to collapse
I understand. I've not experienced many of the issues some have with the updates, though the battery issues a few updates ago were driving me crazy. Those seem to be resolved now and I can easily get 2 to 3 days out of a charge. The only reason I hesitated was I read some of the threads from the initial update Xiaomi put out, and was trying to be sure this one was less troublesome before allowing it. I saw a couple of folks complain about the loss of WiFi and Data on the first update, so perhaps all of the initial bugs haven't been squashed. I'm in Thailand, so need it to be as clean as possible.
Again, hope you get the issue resolved. Let us know if you do.
I am from Czech Republic and I can say I don't have any LTE issues, battery is great. No issues with Pie at all.
@KB_Thailand
If you are a big fan of gcam.. Then dont update, else do it.
For me everything is working fine, except gcam focus issue.
Stock camera works though.
ShaikhSiddiky said:
I just directly installed January update, migrated from Oreo. Didn't face any issues as of yet.
By the way how do you guys turn on FM Radio?
Click to expand...
Click to collapse
You need to connect a wired headphone in the 3.5 mm jack, then you will get FM.
Regards
Eshwar123 said:
@KB_Thailand
If you are a big fan of gcam.. Then dont update, else do it.
For me everything is working fine, except gcam focus issue.
Stock camera works though.
Click to expand...
Click to collapse
It's not working even flashing the magisk patch module?
ccalixtro said:
It's not working even flashing the magisk patch module?
Click to expand...
Click to collapse
I don't know about this, coz I'm a non rooted user.
If it works, please share,
Eshwar123 said:
I don't know about this, coz I'm a non rooted user.
If it works, please share,
Click to expand...
Click to collapse
Well it works for me. Just unlock the bootloader, put the phone in fastboot mode, boot twrp cosmicdans from adb, flash magisk and when it boots open magisk and download camera patch for pie. It's really easy but i think when you unlock the bootloader you lose your data so think about it.
KB_Thailand said:
Got the Pie update notice today along with January security patch. My question is for those who, like me, waited until the official notification to update.
Click to expand...
Click to collapse
If you are stock 100% do it, if not hang out a while, no big issues now for stock, very few people on stock have had an issue with the latest Pie, those that do have very simple easily fixed things.
Barneyjp18 said:
I did the update earlier today and haven't been able to get mobile data since. Can anybody help me?
Click to expand...
Click to collapse
Try the last page here, changing the IPv4/IPv6 setting, it fixed it for others who had a problem.
https://forum.xda-developers.com/mi-a1/help
I have also lost my data connection since the update.
Does anyone have any idea on how to fix this problem?
EDIT : It seems that the update deleted the apn configuration. Re-entering it solved the issue.
Based on the positive responses I went ahead and did the update since my A1 is stock. So far so good with no issues I've noticed. Both data and wifi seem to be working properly.
Thanks for the responses!
After updating to pie many of the users including myself face an issue where the mic volume has reduced a lot. Other people can't hear me properly on normal voice calls
ccalixtro said:
Well it works for me. Just unlock the bootloader, put the phone in fastboot mode, boot twrp cosmicdans from adb, flash magisk and when it boots open magisk and download camera patch for pie. It's really easy but i think when you unlock the bootloader you lose your data so think about it.
Click to expand...
Click to collapse
Thank you for confirming that,
After rooting, and installing the magisk patch, can I completely unroot and lock the bootloader, and will the patch still work?
Will unlocking the bootloader also wipe data?
(i thought only locking bootloader will wipe, we can use the vol button trick)
Thanks in advance.
Eshwar123 said:
Thank you for confirming that,
After rooting, and installing the magisk patch, can I completely unroot and lock the bootloader, and will the patch still work?
Will unlocking the bootloader also wipe data?
(i thought only locking bootloader will wipe, we can use the vol button trick)
Thanks in advance.
Click to expand...
Click to collapse
1. Unlocking bootloader wipes data
2. Does your phone contain nuclear weapon key? If no, then i don't see any reason you dont want a unlocked bootloader. (Manufacturer denying warranty for unlocked bootloader is thing of past, MI has no problem with it. Also you can lock phone just before giving it to MI store in any case)
3. As long as you install apps from playstore, i also dont see any problem with a rooted phone either.
.:Addicted:. said:
1. Unlocking bootloader wipes data
2. Does your phone contain nuclear weapon key? If no, then i don't see any reason you dont want a unlocked bootloader. (Manufacturer denying warranty for unlocked bootloader is thing of past, MI has no problem with it. Also you can lock phone just before giving it to MI store in any case)
3. As long as you install apps from playstore, i also dont see any problem with a rooted phone either.
Click to expand...
Click to collapse
I just want to stay stock and receive official updates and with gcam working as like on oreo. That's it Bro.,
That's why i wanted to unroot and keep the BL locked.
Will the vol down key avoid wipe for unlocking BL as well?
And will the patch work after unroot?
Thanks
Anybody install this yet?
jimlightner said:
Anybody install this yet?
Click to expand...
Click to collapse
I have been running 10.3 for a while and I am t-mobile locked but converted to International. Everything is smooth other than Gpay is not working and Playstore is not certified. This is because I am t-mobile variant.
jimlightner said:
Anybody install this yet?
Click to expand...
Click to collapse
Yes! I've been installed for a few weeks. All perfect.
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
I too got a push update notification. My question is this, can I update through the regular method as it's a full update or do I need to flash?
Originally t mobile variant I rebranded to international and sim unlocked. Also flashed to 9.0.17 and rooted via magisk. Any insight would be appreciated as I have heard improper updating can result in a brick. Thanks in advance
BoSavageYo said:
I too got a push update notification. My question is this, can I update through the regular method as it's a full update or do I need to flash?
Originally t mobile variant I rebranded to international and sim unlocked. Also flashed to 9.0.17 and rooted via magisk. Any insight would be appreciated as I have heard improper updating can result in a brick. Thanks in advance
Click to expand...
Click to collapse
Just do a local upgrade. Just follow the guide to save root.
jimlightner said:
Anybody install this yet?
Click to expand...
Click to collapse
Everybody has installed it... It's been out for days
Went for it yesterday. With an "ultimate guide" here on forum. I was 9.0.17 rooted with twrp description problems. So I downloaded update (1.8Gb) from official One+ site. And did local update, and all the steps to keep root. After finally booting up I got message that Magisk Manager stopped working, but everything was fine. So cleared app temp memory, and settings (for Magisk only) and next boot everything was ok.
Nope... 100% stock, 9.0.17 is ROCK solid, g-pay, samsung pay work perfectly & there really isn't anything in 10 I can't live without yet. So, I
see no need to update for now.
I'm also not updating yet, at least until they fix the keyboard offset issue and other things I've read about.
Luckily you can just freeze the system update app with Titanium.
sssarg said:
I'm also not updating yet, at least until they fix the keyboard offset issue and other things I've read about.
Luckily you can just freeze the system update app with Titanium.
Click to expand...
Click to collapse
There is no keyboard offset issue and so therefore it's never getting fixed. Designs can change, but there isn't going to be a fix for something that isn't a problem.
Causical said:
There is no keyboard offset issue and so therefore it's never getting fixed. Designs can change, but there isn't going to be a fix for something that isn't a problem.
Click to expand...
Click to collapse
Judging by all the people complaining about the empty space under the keyboard it does seems to be a problem, though.
sssarg said:
Judging by all the people complaining about the empty space under the keyboard it does seems to be a problem, though.
Click to expand...
Click to collapse
There is a Magisk module to deal with that (immersive gestural Navigation for Android 10), and an adb command to change the size of the space. It's a deliberate thing from Google so they'll perhaps remove it later or no but staying with Pie just for that.....
Causical said:
There is no keyboard offset issue and so therefore it's never getting fixed. Designs can change, but there isn't going to be a fix for something that isn't a problem.
Click to expand...
Click to collapse
It's not a bug, it's there for the swipe gesture, so that way you won't swipe the keypad when using gestures
Sent from my LG-G8 using Tapatalk
Question of the day. I've been waiting to do the A10 update for the issues it showed on the first days. I'm on a converted 6T from TMo, running 9.0.17. my major concern is the GPay thing I use it a lot. But researching here there's a way to make it work if I root the device. So can I update to 10.3.0 then root to get the GPay issue resolved with the Hide module on magisk? Or should I root on Pie then update?
phillymade said:
It's not a bug, it's there for the swipe gesture, so that way you won't swipe the keypad when using gestures
Sent from my LG-G8 using Tapatalk
Click to expand...
Click to collapse
This is pretty bad ux experience, and with the amount of complaints it seems and accidental keypress possibly when swiping is much better than losing all the text and keyboard closing with an accidental touch. At least give us the option to move it down, without having to go into ADB and setting an offset that then interferes with the way all apps render.