Hi, I have recently installed COS 13 SNAPSHOT build and was working fine. I have restarted my phone and got stuck in a boot loop so I have installed latest COS 13 nightly after which fingerprint menu disappeared totally . I have installed turbo ROM after that (after wiping cos nightly) still no fingerprint menu. Anyway to restore the get it working .
getmmg said:
Hi, I have recently installed COS 13 SNAPSHOT build and was working fine. I have restarted my phone and got stuck in a boot loop so I have installed latest COS 13 nightly after which fingerprint menu disappeared totally . I have installed turbo ROM after that (after wiping cos nightly) still no fingerprint menu. Anyway to restore the get it working .
Click to expand...
Click to collapse
Just some ideas I have. Did you install mm firmware?
Otherwise, I have had FP menu disappear twice in the past. Both times it was after my FP sensor was exposed to some water, so essentially it was compromised. Maybe yours was damaged? I tried wiping and flashing and reflashing different ROMs and firmware and it came back about a week later. I believe the FP sensor finally dried and the water was gone from in there so it worked again. So I think when the sensor is damaged it is removed from settings as if it is not there.
Hope this helps.
Try cleaning credentials, maybe this helps.
JonnyAw said:
Just some ideas I have. Did you install mm firmware?
Otherwise, I have had FP menu disappear twice in the past. Both times it was after my FP sensor was exposed to some water, so essentially it was compromised. Maybe yours was damaged? I tried wiping and flashing and reflashing different ROMs and firmware and it came back about a week later. I believe the FP sensor finally dried and the water was gone from in there so it worked again. So I think when the sensor is damaged it is removed from settings as if it is not there.
Hope this helps.
Click to expand...
Click to collapse
What is mm firmware? I haven't installed it. I have installed twrp and flashed cos nighties on top.
getmmg said:
What is mm firmware? I haven't installed it. I have installed twrp and flashed cos nighties on top.
Click to expand...
Click to collapse
MM firmware is the driver package for marshmallow (android 6.0), it allows you to use fingerprint sensor. On the list of things to install for turbo rom Ordenkreiger did not put that you have to install it but it is required for fp sensor. If you check other cm13 based roms here most will be explicit about installing it.
Here is the link for the firmware for our device, just flash it before installing the roms and FP will work: https://www.androidfilehost.com/?fid=24533103863141329
It only needs to be installed once and then you never worry about it when installing other marshmallow roms. That is the same link given in other threads for our Zuk. Hope it works!
Tried flashing mm-firmware but still no fingerprint menu in setting.
does this works for nougat?
JonnyAw said:
MM firmware is the driver package for marshmallow (android 6.0), it allows you to use fingerprint sensor. On the list of things to install for turbo rom Ordenkreiger did not put that you have to install it but it is required for fp sensor. If you check other cm13 based roms here most will be explicit about installing it.
Here is the link for the firmware for our device, just flash it before installing the roms and FP will work: https://www.androidfilehost.com/?fid=24533103863141329
It only needs to be installed once and then you never worry about it when installing other marshmallow roms. That is the same link given in other threads for our Zuk. Hope it works!
Click to expand...
Click to collapse
or any alternative for nougat..
Goku027 said:
or any alternative for nougat..
Click to expand...
Click to collapse
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Try nuclear ROM 1.0.1 beta no issue with finger print and calling no bug for zuk z1
Goku027 said:
or any alternative for nougat..
Click to expand...
Click to collapse
I serch in google and found this file for Nougat:
https://www.androidfilehost.com/?fid=745425885120705241
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
thanks..it worked.
scraptchatella said:
I serch in google and found this file for Nougat:
https://www.androidfilehost.com/?fid=745425885120705241
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
Click to expand...
Click to collapse
now my fingerprint sensor is back.
scraptchatella said:
I serch in google and found this file for Nougat:
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
Click to expand...
Click to collapse
Thanks a lot, worked for me too, after flashing lineage os from cos 12 my finger print option disappeared too. Luckily I found this now every thing works again!
I had the same problem. And tried all the available options like updating mm firmware, Going back to COS 12.1, CM 13, LOS 14.1.... Nothing really worked. For some time finger print worked in COS12.1 and after a while it malfunctioned, and vibrated continuously. Then I have taken to the service center. There they have replaced the whole screen.( dont know the exact reason and the person delivered the mobile is too noob to ask). So what I mean is it is a hard issue upto my knowledge. If your mobile is covered in warranty, give it a try..
This file only makes a penguin logo appear when I boot my rr ROM. Did not provide the finger print option. Hope this does not mess with my phone. Is there any way to remove this thing I flashed?
lineage-14.1-20171031
I cannot find the fingerprint menu. Where should it be? The setup was interrupted and now I cannot find it.
Radhouene90 said:
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Click to expand...
Click to collapse
Well my mic also not works in case i am recording but when i receive a call and put it on loudspeaker it works fine...
Anyone can tell what is that problem??
highdude said:
Well my mic also not works in case i am recording but when i receive a call and put it on loudspeaker it works fine...
Anyone can tell what is that problem??
Click to expand...
Click to collapse
this could be a software problem, what ROM are you using ?
As for my fingerprint, i changed it , it's working ..
Radhouene90 said:
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Click to expand...
Click to collapse
Got my fingerprint working with the Dead Unicorns ROM, while it didn't work with lineage and nuclea.
lg-optimus said:
Got my fingerprint working with the Dead Unicorns ROM, while it didn't work with lineage and nuclea.
Click to expand...
Click to collapse
i tried it but id does not worked , so i bought a new one from ebay
Radhouene90 said:
this could be a software problem, what ROM are you using ?
As for my fingerprint, i changed it , it's working ..
Click to expand...
Click to collapse
I haven't changed my rom yet
My phone isn't even rooted
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
highdude said:
I haven't changed my rom yet
My phone isn't even rooted
Click to expand...
Click to collapse
And i wanna root my phone any suggestions how to do that
Related
When I updated w/ latest oficial MM (not beta, the final one) none of the sensors were not working at all. Zen fone 2 551ML.
Edit:
At least if you have a Brazilian Zenfone... more than20 people had the same problem. Mine is a brazilian one.
http://www.asus.com/zentalk/thread-98565-1-1.html
juraci said:
I do not recoomend updating w/ latest oficial MM (not beta, the final one): the sensors are not working at all. Zen fone 2 551ML
Click to expand...
Click to collapse
all is working here
don't confuse people with wrong info
It's not wrong info if HIS sensors are not working.
How did you update? Ware you rooted, unlocked ?
Sent from my ASUS_Z008D
I think it's the same problem some people experienced with the leaked beta .61
Never understood why for some people everything works, while for some others the sensors were (are?) not recognized...
Acca85 said:
It's not wrong info if HIS sensors are not working.
How did you update? Ware you rooted, unlocked ?
Sent from my ASUS_Z008D
Click to expand...
Click to collapse
i was unlocked but not rooted flashed the system with .194 raw then updated all the apps from playstore
then download MM update and let it finish flash after that go to stock recovery and sideload update onece more
the format data and cache and reboot to system
first boot takes a while.............. wait to boot up
and all is good for me.....
u check your device with sensor app from play store to verify
Acca85 said:
It's not wrong info if HIS sensors are not working.
How did you update? Ware you rooted, unlocked ?
Sent from my ASUS_Z008D
Click to expand...
Click to collapse
My Zenfone was not rooted neither modded with something. 100% asus original, updating from the original firmware .194 to MM firmware downloaded from Asus Site. I've checked the sensors with AIDA and CPUX apps.
All sensors were working as expected before the update.
My next attempt will be a factory reset to see if it works.
Druboo666 said:
all is working here
don't confuse people with wrong info
Click to expand...
Click to collapse
This is the reason of a forum... to discuss and share experiences. If the upgrade is working for you... great! It is good to know.
I did update too and I'm facing the same issues. It appears to be something related to Brazilian ZF2. I've seen more than 15 reports on this issue and each one of them were Brazilian. Hope we get and answer soon. For now, I'm rolling back to lollipop.
juraci said:
This is the reason of a forum... to discuss and share experiences. If the upgrade is working for you... great! It is good to know.
Click to expand...
Click to collapse
Its okay to share experiences but you were telling people "I do not recoomend updating w/ latest oficial MM"which is a wrong info and people may get confused with this kind post
Druboo666 said:
(...)
u check your device with sensor app from play store to verify
Click to expand...
Click to collapse
You can also use the internal SMMI test app: open the calculator, digit .12345+= then select single test for the sensors
---------- Post added at 07:48 PM ---------- Previous post was at 07:41 PM ----------
thiagoml said:
I did update too and I'm facing the same issues. It appears to be something related to Brazilian ZF2. I've seen more than 15 reports on this issue and each one of them were Brazilian. Hope we get and answer soon. For now, I'm rolling back to lollipop.
Click to expand...
Click to collapse
At the time of beta .61 there it was no apparent reason for the sensor(s) failing to be recognised on some phones, other than perhaps the age of the phone (thus different HW releases).
If that's the case, only ASUS can fix it (and I wonder why they didn't in the past 3 months...)
Sensor test
I've tested my proximity sensor and it fail in step 2: away.
GREGGDYNIA said:
I've tested my proximity sensor and it fail in step 2: away.
Click to expand...
Click to collapse
Is that the only sensor not working?
xpen.xda said:
Is that the only sensor not working?
Click to expand...
Click to collapse
Yes, only proximity. G-sensor, light, compass, touch etc all ok, just proximity (away) fail.
GREGGDYNIA said:
Yes, only proximity. G-sensor, light, compass, touch etc all ok, just proximity (away) fail.
Click to expand...
Click to collapse
Do you have a screen protector that cover the prox sensor?
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
Do you have a screen protector that cover the prox sensor?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
No screen protector at all. Phone was working absolutely fine before update (today). Phone is not rooted, is locked (bootloader as original) and it was upgraded via ota (downloaded zip to phone, reboot and tapped update). So it was dirty update but never had any problems before when updating.
GREGGDYNIA said:
No screen protector at all. Phone was working absolutely fine before update (today). Phone is not rooted, is locked (bootloader as original) and it was upgraded via ota (downloaded zip to phone, reboot and tapped update). So it was dirty update but never had any problems before when updating.
Click to expand...
Click to collapse
You were on Lollipop before this update, or on the leaked beta? Because this problem only surfaced with the first MM beta, back then
xpen.xda said:
You were on Lollipop before this update, or on the leaked beta? Because this problem only surfaced with the first MM beta, back then
Click to expand...
Click to collapse
I was on lollipop WW-2.20.40.194, never tried mm beta.
GREGGDYNIA said:
I was on lollipop WW-2.20.40.194, never tried mm beta.
Click to expand...
Click to collapse
That's what I was expecting, in fact.. thanks
From Brazil and sensors dont work... All sensors... Since beta marshmallow .... Any drivers is missing to us from Brazil!
From brazil too, sensors not working.
http://en.miui.com/forum.php?mod=viewthread&tid=402767&mobile=2
A little backgroud:Like most of the users of Redmi Note 3,I have been at wits end to get volte working on the recent versions of global developer rom.Post 6.9.22 I wasn't able to use volte and since the feature was essential to me,I would revert back to 6.9.22 global developer rom.
Soultion:Here is an easy way that would help you guys to get volte up and running on the recent versions of MIUI.I backed up my 6.9.22 rom using TWRP ZCX,since I had volte working on it.I installed the version 6.10.27(since it was on my laptop,tested on 6.11.3 as well..screenshot enclosed)using TWRP ZCX,then restored the modem and efs from 6.9.22 that I had backed up.Volte is up and running.No issues so far.Will update this if I face any issues.
Result so far:Volte is working flawlessly on 6.11.3.In fact it is better than in 6.9.22,where you had to delete the APN to get volte.Also no issue of data being on at the time of volte,like it was in some earlier builds.Posting a screenshot as well.
Anyway to install 6.11.3 using twrp ??
i havnt faced any volte issue, m always on latest beta.
tharmor said:
Anyway to install 6.11.3 using twrp ??
Click to expand...
Click to collapse
I will recommend TWRP ZCX as I have tried it multiple times.Most recently I flashed 6.11.3 yesterday.On TWRP alka I got a soft brick.So I can't say if TWRP will work properly.
c_/\/\_k said:
i havnt faced any volte issue, m always on latest beta.
Click to expand...
Click to collapse
Well then you must be a luck guy.Do you clean flash always?
mmnspeed said:
Well then you must be a luck guy.Do you clean flash always?
Click to expand...
Click to collapse
never, i love my userdata, so i always prefer dirty flash, and all the system mods again n again.
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
tharmor said:
Anyway to install 6.11.3 using twrp ??
Click to expand...
Click to collapse
either you flash boot image patcher or use modified recovery.
c_/\/\_k said:
never, i love my userdata, so i always prefer dirty flash, and all the system mods again n again.
Click to expand...
Click to collapse
There is a minority of people on MIUI forums also who say what you are saying.I have even tried clean flashing on my device,but it doesn't work.As I said you are the lucky few.For the rest of us it has been 6.9.22 all the way.At least till yesterday.Hopefully the developers will find a permanent fix.I am not complaining as the fix I posted yesterday is working flawlessly.
mmnspeed said:
There is a minority of people on MIUI forums also who say what you are saying.I have even tried clean flashing on my device,but it doesn't work.As I said you are the lucky few.For the rest of us it has been 6.9.22 all the way.At least till yesterday.Hopefully the developers will find a permanent fix.I am not complaining as the fix I posted yesterday is working flawlessly.
Click to expand...
Click to collapse
anyways i barely use miui forum so no idea about it, and builds are perfectly fine because we all downlods frm same servers, issue may be device specific or may b large batch of devices are affected frm it, btw global beta releases for RN3 qualcom were suspended after 6.10.13 bcoz few major bugs have been reported on few of the devices, may be you r one of them.
c_/\/\_k said:
never, i love my userdata, so i always prefer dirty flash, and all the system mods again n again.
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
either you flash boot image patcher or use modified recovery.
Click to expand...
Click to collapse
c_/\/\_k said:
anyways i barely use miui forum so no idea about it, and builds are perfectly fine because we all downlods frm same servers, issue may be device specific or may b large batch of devices are affected frm it, btw global beta releases for RN3 qualcom is suspended after 6.10.13 bcoz few major bugs have been reported on few of the devices, may be you r one of them.
Click to expand...
Click to collapse
I myself suspect the same.Maybe some differences in device hardware.Global dev 6.11.3 has been released yesterday for Redmi Note 3 after being suspended for a few weeks.I was on 6.9.22 and initially downloaded the ota zip and dirty flashed it.Lost volte.Then reverted to 6.9.22 and decided to do something.lol.Can you tell me which version you last used fast boot ROM of?Just curious.I just yesterday saw a mod telling a poster that volte is working fine on beta 6.9.22 and global stable 8.0.6(haven't tried that..tried 8.0.5 but volte wasn't working).They are well aware of the issue.That confirms that there is one.
PS:Also if you dirty flash to 6.11.3,please do post your experience here.Whether volte works normally.
mmnspeed said:
I myself suspect the same.Maybe some differences in device hardware.Global dev 6.11.3 has been released yesterday for Redmi Note 3 as well after being suspended for a few weeks.I was on 6.9.22 and initially downloaded the ota zip and dirty flashed it.Lost volte.Then reverted to 6.9.22 and decided to do something.lol.Can you tell me which version you last used fast boot ROM of?Just curious.I just yesterday saw a mod telling a poster that volte is working fine on beta 6.9.22 and global stable 8.0.6(haven't tried that..tried 8.0.5 but volte wasn't working).They are well aware of the issue.That confirms that there is one.
PS:Also if you dirty flash to 6.11.3,please do post your experience here.Whether volte works normally.Since you are on 6.10.13,it will be a full update,around 1.3Gb.
Click to expand...
Click to collapse
as i can see in screenshot above, you are using 2 gb variant, and i use 3gb variant, we are on different soc so it quite obivous that we will have different experiences. i still wonder wat kind of problem you are talking about because i never suspected anything like that.. i flashed 6.8.x as a last fastboot rom, afterwards i do dirty flashes, i used boot image patcher previously but nw i do it with zcx twrp. and 6.9.22 was quite stable build for me.. i didnt noticed any bug in anything. i hv jst flashed 6.11.3, its booted up, and seems fine to me as well.
Edit: Everytime i flash beta builds, i need to flash super su, xposed, few mod zips as well... and i have toremove bloatwares and few xiaomi core apps too everytime.. after all these efforts the rom becomes so smooth and fast to play with.
c_/\/\_k said:
as i can see in screenshot above, you are using 2 gb variant, and i use 3gb variant, we are on different soc so it quite obivous that we will have different experiences. i still wonder wat kind of problem you are talking about because i never suspected anything like that.. i flashed 6.8.x as a last fastboot rom, afterwards i do dirty flashes, i used boot image patcher previously but nw i do it with zcx twrp. and 6.9.22 was quite stable build for me.. i didnt noticed any bug in anything. i hv jst flashed 6.11.3, its booted up, and seems fine to me as well.
Click to expand...
Click to collapse
I didn't know you have a 3Gb variant.One thing is clear to me now that there is a definite issue with certain devices and I own one of them.As is evident we have a slightly different hardware configuration.But thankfully not a big deal now as I have it working flawlessly and xiaomi can take its own sweet time.Enjoy the new update.
I think this problem is peculiar for me as I didn't find in this forum or anywhere else about this weird problem.
After updating from stock MM all this CM giving me restart problem as soon as the screen times out or I press the power button to lock.
Can anyone help me please?
I had a face this problem. Have you get any solution for this yet?
No. Everyone seems busy!
I just got the same issue, with ZE551kl. The only solution for me was to downgrade cm 13(6.0.1)
addvardd said:
I just got the same issue, with ZE551kl. The only solution for me was to downgrade cm 13(6.0.1)
Click to expand...
Click to collapse
But I want Nougat, not MM. Stock MM is quite fine for me.
masud.shorif said:
But I want Nougat, not MM. Stock MM is quite fine for me.
Click to expand...
Click to collapse
Then you should get used to the restarting issue, for me it's quite annoying, so i gave up on that.
I have seen that nobody shared this informations: openkirin is working on lineageos, resurrection remix, carbonrom and omnirom. These are treble ROMs and openkirin has published beta previews that support our device, we have fully working cameras with stock emui camera app on every rom( with all functions), every rom works perfecly, no bugs, no issues, everything works, I only faced with overheating caused by fast charger that I fixed using a normal charger. You find links on openkirin telegram group, keep in mind that these are only previews so things could be even better. (Thanks openkirin)
Fully supported Openkirin LOS b5 for honor 8 is out... Download at openkirin.net
Volte working?
annujangra said:
Volte working?
Click to expand...
Click to collapse
Not yet
Any chance of volte working??
annujangra said:
Any chance of volte working??
Click to expand...
Click to collapse
https://openkirin.net/support/
Can we enable it by a magisk module called volteenabler??
No. No volte. The openkirin team will tell you the exact same thing. And sorry but those who pay attention to xda about Oreo know these images already exist. They've been discussed here for well over a month.
I don't think the Treble ROMs are working very well. I've Tried LOS Beta 5 from openkirin's website. Factory reset using custom recovery after Flashing the LOS system image didn't work. However the ROM booted and there was some issues like, random google error message pop-ups and both the camera apps aren't working. I've tried this thoroughly by following the installation guide on their website but still had these issues. Any suggestions or help is welcomed.
You should NOT use custom recovery at all.
Alok Bajaj said:
I don't think the Treble ROMs are working very well. I've Tried LOS Beta 5 from openkirin's website. Factory reset using custom recovery after Flashing the LOS system image didn't work. However the ROM booted and there was some issues like, random google error message pop-ups and both the camera apps aren't working. I've tried this thoroughly by following the installation guide on their website but still had these issues. Any suggestions or help is welcomed.
Click to expand...
Click to collapse
Just use commands ( fastboot erase system and the Fastboot flash system ) for installing.
Graphical issues had fixed and reuploaded .Download it again :highfive:
i have Android 8, emui 4.2 and i want to flash one of these roms. Root and open bootloader is there.
Somebody has an idea what the perfect procedure to flash one of this roms is? First Oreo than the rom? Thanks
Palindrom87 said:
i have Android 8, emui 4.2 and i want to flash one of these roms. Root and open bootloader is there.
Somebody has an idea what the perfect procedure to flash one of this roms is? First Oreo than the rom? Thanks
Click to expand...
Click to collapse
You first need to update to Oreo, yes. Neither Marshmallow nor Nougat support Treble ROMs.
Depending on where you live and what model you own you probably need to rebrand though. Or you wait until Honor/Huawei rolls out the update for your region, which shouldn't take TOO long anymore.
Moh3n.B said:
Just use commands ( fastboot erase system and the Fastboot flash system ) for installing.
Graphical issues had fixed and reuploaded .Download it again :highfive:
Click to expand...
Click to collapse
I'll try. Now I'm on AOSPA 7.1
Alok Bajaj said:
I'll try. Now I'm on AOSPA 7.1
Click to expand...
Click to collapse
Just bear in mind... installation needs to be done through fastboot and not through twrp.. Also its also recommended that you extract the stock files like ramdisk etc. so that incase something goes wrong you would be able to go back to it
All the best mate.. I m running LoS B5 with Magisk and it works like a charm..
kishorev said:
Just bear in mind... installation needs to be done through fastboot and not through twrp.. Also its also recommended that you extract the stock files like ramdisk etc. so that incase something goes wrong you would be able to go back to it
All the best mate.. I m running LoS B5 with Magisk and it works like a charm..
Click to expand...
Click to collapse
Thanks for the tips. And yes I flashed via fastboot not twrp. But if you please, could you write down exact steps to flash this ROM considering I'm on EMUI 8 with stock Recovery... And what would be the exact steps that I need to do next.
Are you using Magisk 16.x? And it works with fingerprint and PIN set on the device?
Alok Bajaj said:
Thanks for the tips. And yes I flashed via fastboot not twrp. But if you please, could you write down exact steps to flash this ROM considering I'm on EMUI 8 with stock Recovery... And what would be the exact steps that I need to do next.
Are you using Magisk 16.x? And it works with fingerprint and PIN set on the device?
Click to expand...
Click to collapse
I m using the custom version of magisk.. i shall share you to the links later today when I get back from work..infact all these details are available on openkirin.net
kishorev said:
I m using the custom version of magisk.. i shall share you to the links later today when I get back from work..infact all these details are available on openkirin.net
Click to expand...
Click to collapse
Okay. I had followed the instructions on openkirin.net. However I ran into some issues that I posted recently. I'll wait for the link. Now I'm going to try RROS B2.
Alok Bajaj said:
Okay. I had followed the instructions on openkirin.net. However I ran into some issues that I posted recently. I'll wait for the link. Now I'm going to try RROS B2.
Click to expand...
Click to collapse
I'm experiencing similar things.
SD card doesn't get recognized/system says it's corrupted which is obviously isn't, root via ramdisk method works but Magisk is buggy and modules just won't install, WiFi randomly turns off or disconnects with no pattern behind it... I've tried both LOS (twice) and ROS (once) and they both have similar problems. Guess I'll have to stay on EMUI then... *sigh*
Frau Son said:
I'm experiencing similar things.
SD card doesn't get recognized/system says it's corrupted which is obviously isn't, root via ramdisk method works but Magisk is buggy and modules just won't install, WiFi randomly turns off or disconnects with no pattern behind it... I've tried both LOS (twice) and ROS (once) and they both have similar problems. Guess I'll have to stay on EMUI then... *sigh*
Click to expand...
Click to collapse
Have you tried the RROS B2? It was posted recently. It's working well for me now.
Hello guy's
November update is here : Let's upgrade :good:
But no pie for this moment
It broke my phone...
90.3 MB Lets see if they fix the proximity sensor
---------- Post added at 03:42 PM ---------- Previous post was at 03:35 PM ----------
Agustinm said:
90.3 MB Lets see if they fix the proximity sensor
Click to expand...
Click to collapse
UPdate OK
It seems that proximity sensor is working much better
Oodles47 said:
It broke my phone...
Click to expand...
Click to collapse
Mine too, but the "fix" is to remove your SIM card. Without it, your phone won't go into the bootloop. No need to go for the factory reset just yet...
harmtemolder said:
Mine too, but the "fix" is to remove your SIM card. Without it, your phone won't go into the bootloop. No need to go for the factory reset just yet...
Click to expand...
Click to collapse
Thanks! I'll try it. Already did a factory reset though...
Voniaak said:
Hello guy's
November update is here : Let's upgrade :good:
But no pie for this moment
Click to expand...
Click to collapse
Successfully updated but wht are the improvemnts...did u guys find any ?
proximity sensor is working much better
90.3MB for me it's a security update not an system upgrade so very surprised that the proximity sensor is working much better
cyrillem28410 said:
90.3MB for me it's a security update not an system upgrade so very surprised that the proximity sensor is working much better
Click to expand...
Click to collapse
my proximity is trash here
Enter *#*#64663#*#* for test menu. Go to proximity centre and wave hand close to the sensor so the calibration menu becomes available calibraye and exit.
Whatsapp audio (proximity sensor) and Read/Write emmc speeds (clean big cache) still buugged. no pie and no bug fixes..sad
I haven't got it yet anyone knows why ? My OTA says there are no updates and I still have October security
I sell my phone and buy mate 10
Way more better
emprazol said:
I sell my phone and buy mate 10
Way more better
Click to expand...
Click to collapse
I'm gonna return my phone, too. Never a Xiaomi for me again.
emprazol said:
I sell my phone and buy mate 10
Way more better
Click to expand...
Click to collapse
Well for a double of the price, it should be better !
~500eur vs ~220eur
I know that mate 10 lite was a trash, and it worked like a trash.
Smart Lock stopped working in my device. It was working fine in the October patch.
kvnfjv said:
Whatsapp audio (proximity sensor) and Read/Write emmc speeds (clean big cache) still buugged. no pie and no bug fixes..sad
Click to expand...
Click to collapse
Same here, nothing changed. This is the patch just for security from Google. I think they will fix all this bugs only with Android Pie update, just not to make a double work )
It fix my october update failed issue. Nice .. about 1gb size..
I cant install, error.
I have root and bootloader unlocked, but i have flashed the boot.img to unroot, and still dont installing. Any suggestions? I dont want to flash stock again lol
sergiopjr85 said:
I cant install, error.
I have root and bootloader unlocked, but i have flashed the boot.img to unroot, and still dont installing. Any suggestions? I dont want to flash stock again lol
Click to expand...
Click to collapse
I have unlocked bootloader and had root. I uninstalled Magisk manager and restored the images then used completely uninstall and now it doesn't want to update.
Can anyone help?