No sensors working w/ oficial MM update - ZenFone 2 General

When I updated w/ latest oficial MM (not beta, the final one) none of the sensors were not working at all. Zen fone 2 551ML.
Edit:
At least if you have a Brazilian Zenfone... more than20 people had the same problem. Mine is a brazilian one.
http://www.asus.com/zentalk/thread-98565-1-1.html

juraci said:
I do not recoomend updating w/ latest oficial MM (not beta, the final one): the sensors are not working at all. Zen fone 2 551ML
Click to expand...
Click to collapse
all is working here
don't confuse people with wrong info

It's not wrong info if HIS sensors are not working.
How did you update? Ware you rooted, unlocked ?
Sent from my ASUS_Z008D

I think it's the same problem some people experienced with the leaked beta .61
Never understood why for some people everything works, while for some others the sensors were (are?) not recognized...

Acca85 said:
It's not wrong info if HIS sensors are not working.
How did you update? Ware you rooted, unlocked ?
Sent from my ASUS_Z008D
Click to expand...
Click to collapse
i was unlocked but not rooted flashed the system with .194 raw then updated all the apps from playstore
then download MM update and let it finish flash after that go to stock recovery and sideload update onece more
the format data and cache and reboot to system
first boot takes a while.............. wait to boot up
and all is good for me.....
u check your device with sensor app from play store to verify

Acca85 said:
It's not wrong info if HIS sensors are not working.
How did you update? Ware you rooted, unlocked ?
Sent from my ASUS_Z008D
Click to expand...
Click to collapse
My Zenfone was not rooted neither modded with something. 100% asus original, updating from the original firmware .194 to MM firmware downloaded from Asus Site. I've checked the sensors with AIDA and CPUX apps.
All sensors were working as expected before the update.
My next attempt will be a factory reset to see if it works.

Druboo666 said:
all is working here
don't confuse people with wrong info
Click to expand...
Click to collapse
This is the reason of a forum... to discuss and share experiences. If the upgrade is working for you... great! It is good to know.

I did update too and I'm facing the same issues. It appears to be something related to Brazilian ZF2. I've seen more than 15 reports on this issue and each one of them were Brazilian. Hope we get and answer soon. For now, I'm rolling back to lollipop.

juraci said:
This is the reason of a forum... to discuss and share experiences. If the upgrade is working for you... great! It is good to know.
Click to expand...
Click to collapse
Its okay to share experiences but you were telling people "I do not recoomend updating w/ latest oficial MM"which is a wrong info and people may get confused with this kind post

Druboo666 said:
(...)
u check your device with sensor app from play store to verify
Click to expand...
Click to collapse
You can also use the internal SMMI test app: open the calculator, digit .12345+= then select single test for the sensors
---------- Post added at 07:48 PM ---------- Previous post was at 07:41 PM ----------
thiagoml said:
I did update too and I'm facing the same issues. It appears to be something related to Brazilian ZF2. I've seen more than 15 reports on this issue and each one of them were Brazilian. Hope we get and answer soon. For now, I'm rolling back to lollipop.
Click to expand...
Click to collapse
At the time of beta .61 there it was no apparent reason for the sensor(s) failing to be recognised on some phones, other than perhaps the age of the phone (thus different HW releases).
If that's the case, only ASUS can fix it (and I wonder why they didn't in the past 3 months...)

Sensor test
I've tested my proximity sensor and it fail in step 2: away.

GREGGDYNIA said:
I've tested my proximity sensor and it fail in step 2: away.
Click to expand...
Click to collapse
Is that the only sensor not working?

xpen.xda said:
Is that the only sensor not working?
Click to expand...
Click to collapse
Yes, only proximity. G-sensor, light, compass, touch etc all ok, just proximity (away) fail.

GREGGDYNIA said:
Yes, only proximity. G-sensor, light, compass, touch etc all ok, just proximity (away) fail.
Click to expand...
Click to collapse
Do you have a screen protector that cover the prox sensor?
Sent from my ASUS_Z00A using Tapatalk

kenbo111 said:
Do you have a screen protector that cover the prox sensor?
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
No screen protector at all. Phone was working absolutely fine before update (today). Phone is not rooted, is locked (bootloader as original) and it was upgraded via ota (downloaded zip to phone, reboot and tapped update). So it was dirty update but never had any problems before when updating.

GREGGDYNIA said:
No screen protector at all. Phone was working absolutely fine before update (today). Phone is not rooted, is locked (bootloader as original) and it was upgraded via ota (downloaded zip to phone, reboot and tapped update). So it was dirty update but never had any problems before when updating.
Click to expand...
Click to collapse
You were on Lollipop before this update, or on the leaked beta? Because this problem only surfaced with the first MM beta, back then

xpen.xda said:
You were on Lollipop before this update, or on the leaked beta? Because this problem only surfaced with the first MM beta, back then
Click to expand...
Click to collapse
I was on lollipop WW-2.20.40.194, never tried mm beta.

GREGGDYNIA said:
I was on lollipop WW-2.20.40.194, never tried mm beta.
Click to expand...
Click to collapse
That's what I was expecting, in fact.. thanks

From Brazil and sensors dont work... All sensors... Since beta marshmallow .... Any drivers is missing to us from Brazil!

From brazil too, sensors not working.

Related

Software Version 10M Discussion Thread

Hey all,
Feel free to use this thread to discuss the recent V10m-OCT-14 Software Update for the G3. I have just received it on my International D855 Model.
Listed enhancements are:
- Apps
This update is 180MB if coming from the other latest update, v10l. You can download this update by going to your Update Center, Software Update. Or, your G3 might have already downloaded it OTA.
Personally, I find a bit more battery life, and more responsiveness coming from v10l, feel free to share your individual experiences with this update here!
Battery life is better than 10L, but it's only one day used. Will see how is in the next few days
Just installed it and rooted it with PD...works fine at the moment, downloading music from spotify and such, let's see how it behaves in a few days time. V10L still had the noises while charging...expecting 10m to have the same issue.
Any KDZ File?
Thank's
Bump! works with this?
lossah said:
Bump! works with this?
Click to expand...
Click to collapse
PurpleDrake root and Bump! is working with this version too.
freaked9 said:
PurpleDrake root and Bump! is working with this version too.
Click to expand...
Click to collapse
Awesome. Wonder what "apps" mean. Not less lag guess?
pcwm said:
Any KDZ File?
Thank's
Click to expand...
Click to collapse
Mega:
https://mega.co.nz/#!QJRj2CiC!Itn_hfpNHLxmpVFhobybtkb4Wf87sZaQxyJ6ASQBpN8
A few hours of usage 10M seems on par with 10L, same performance noting special. Guess we will have to see, the newer kernel build date suggests that some tweaks and updates are present and we are always grateful for tweaks
freaked9 said:
PurpleDrake root and Bump! is working with this version too.
Click to expand...
Click to collapse
:good: Cool. I can't wait OTA.
@ Mr Bo
Thank's , flash in progress.
Does this update resolves the "Hissing and buzzing sound with headset/AUX" issue ?
Still don't see the M for my IMEI / Region (India) yet. Waiting !
Hissing noise is likely to be hardware so don't hold your breath for a software fix. They obviously didn't adequately shield headphone socket from the charging/battery.
Blimey, I only just got around to flashing v10L.
Is there a way to install the OTA update for someone who has TWRP recovery installed without getting stuck inn the recovery on reboot ? Fortunately, there is a fix to get out of the recovery but the OTA doesn't install when returning back to system.
oracleoftruth said:
Hissing noise is likely to be hardware so don't hold your breath for a software fix. They obviously didn't adequately shield headphone socket from the charging/battery.
Click to expand...
Click to collapse
I can cancel this issue with some tricks (USB or call trick). The G2 did have this issue with kk4.4.2 ant it was resolved with the 4.4.4. So i m still waiting an update or an aosp rom.
soupratt said:
Is there a way to install the OTA update for someone who has TWRP recovery installed without getting stuck inn the recovery on reboot ? Fortunately, there is a fix to get out of the recovery but the OTA doesn't install when returning back to system.
Click to expand...
Click to collapse
I'd like to know this as well.
biron_w said:
I'd like to know this as well.
Click to expand...
Click to collapse
Tried this?
That's how I install L. Worked fine, just lost root (which TWRP fixed), DPI was changed back to stock (I fixed that) and it reinstalled a little bloatware (McAfee) which Titanium took care of.
That is, of course, if you can get the KDZ.
I can't see any serious difference after weeks of using ".i" version... always flashing with CSE option.
phone works great, very smooth, battery life for around 5-6h of screen awake

new update G925FXXU2BOGE 5.1.1

Hi All,
I just received a new update on my Sim Free UK S6 Edge, unfortunately I did not capture the list of changes.
Attached screenshot. Not sure what has changed and I need to pop out, will check through some apps and settings latter
cheers,
found this
<Mod Edit - SamMobile Links are not permitted.>
sorry mods - wrong section, should be in general
has the memory leak/slow speeds/lag been fixed? -_-
Here the Mega-link:
http://forum.xda-developers.com/showpost.php?p=62069348&postcount=303
just receiving OTA 227.62 mb, dont know what changes it has.
It's strange that after the update, the DETAIL menu from Battery can't be pressed. So no Auto Stop Apps after 10 minutes anymore...
2dorr said:
It's strange that after the update, the DETAIL menu from Battery can't be pressed. So no Auto Stop Apps after 10 minutes anymore...
Click to expand...
Click to collapse
you got the update via OTA? or flashed?\
rooted or not?
Flashed with ODIN, no root.
2dorr said:
Flashed with ODIN, no root.
Click to expand...
Click to collapse
thank you.
2dorr said:
Flashed with ODIN, no root.
Click to expand...
Click to collapse
Can you say something about memory management please?
Inviato dal mio SM-G925F utilizzando Tapatalk
I was previously on 5.0.2 on my UK S6 Edge sim free and yesterday I got this 5.1.1 update.
No idea if it's the standard 5.1.1 or the updated one that fixes the memory and battery leaks.
MrZippo said:
I was previously on 5.0.2 on my UK S6 Edge sim free and yesterday I got this 5.1.1 update.
No idea if it's the standard 5.1.1 or the updated one that fixes the memory and battery leaks.
Click to expand...
Click to collapse
That's BOGB, so the latest 5.1.1.
Too early to say for sure if this fixes all my issues with my S6E but, after 24 hours running it, it does seem better than any of the other S6E builds I've used.
Regards,
Dave
Sent from my SM-G925F using Tapatalk
foxmeister said:
That's BOGB, so the latest 5.1.1.
Too early to say for sure if this fixes all my issues with my S6E but, after 24 hours running it, it does seem better than any of the other S6E builds I've used.
Regards,
Dave
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
That's cool. It's difficult for me to say as I never got the update to the first 5.1.1 and was stuck on 5.0.2 and only yesterday did i get the update to 5.1.1
But so far battery life seems to be on par with 5.0.2 and I do notice that unlocking the lock screen and going into the home screen seems a tad faster.
is it worth to loose root? cos i'm still on 5.02 with Root Exploit [email protected] and i use Titanium Backup a lot
Battery seems to be better on mine since the update
2dorr said:
It's strange that after the update, the DETAIL menu from Battery can't be pressed. So no Auto Stop Apps after 10 minutes anymore...
Click to expand...
Click to collapse
Yeah, same for me.
I'm not finding much different than BOFJ. Battery maybe better but too early to say yet.
Just a question to participators, what version of Android were you all on prior to the update..I'm trying to get my head around this update as there's another news that Samsung has released another update of about 120mb in France...
amirage said:
Just a question to participators, what version of Android were you all on prior to the update..I'm trying to get my head around this update as there's another news that Samsung has released another update of about 120mb in France...
Click to expand...
Click to collapse
I was on 5.0.2
amirage said:
Just a question to participators, what version of Android were you all on prior to the update..I'm trying to get my head around this update as there's another news that Samsung has released another update of about 120mb in France...
Click to expand...
Click to collapse
I don't think anyone except Samsung can understand their Rom updates (maybe even they can't!)
Mod Edit
Please continue this discussion here:
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
Thread closed
malybru
Forum Moderator

OTA Update came for Moto G 3rd gen 2015 3 new update.

Finally Motorola released the OTA update for Moto g 3rd gen with 3 different improvements .The size of OTA is 177.4 Mb.
1.Stagefright Fix
2.Add Night Mode to Camera
3.Bug fixes and Stability Improvements
Source:http://www.gammerson.com/2015/09/moto-g-3rd-gen-ota-update-fix-download.html
so this update will fix the overheating issue and battery drain issue?
gonzodesigns said:
so this update will fix the overheating issue and battery drain issue?
Click to expand...
Click to collapse
What issues are those? I've seen very few reports of those types of issues with the 3rd gen. Obviously, those things happens to a small portion of users on almost every Android phone.
screen on time is decent, but could be better. I'd love to find a permissive kernel I could tweak...anyone up for it??
Im still running the release version firmware. Had night mode since release so i wonder apart from stagefright what the UK release will bring?
Does anyone have this as a flashable zip yet?
Sent from my MotoG3 using xda premium
bozzykid said:
What issues are those? I've seen very few reports of those types of issues with the 3rd gen. Obviously, those things happens to a small portion of users on almost every Android phone.
Click to expand...
Click to collapse
my personal experience with an 8gb model was a hot skillet in just 3 minutes on wifi or lte network plus doing some search i found a lot of users reporting the same issue so its not a very small percent it is a known issue maybe some users dont report it or dont care about it but it really gets hot. maybe some batchs maybe the 8gb model who knows!
every phone have small issues some related to hardware some related to software thats why i asked if the upgrade fix this one
but a phone that turns in to a hot skillet its not safe to use.
Update notes
gonzodesigns said:
so this update will fix the overheating issue and battery drain issue?
Click to expand...
Click to collapse
Umm... What overheating and battery drain issues . My Moto G3 is definitely the coolest running phone is ever owned, and battery life is very good to excellent.
Sounds to me like you have other issues going on.
Sent from my MotoG3 using Tapatalk
Not showing up on my US retail version yet.
Himalaya saxena said:
Finally Motorola released the OTA update for Moto g 3rd gen with 3 different improvements .The size of OTA is 177.4 Mb.
1.Stagefright Fix
2.Add Night Mode to Camera
3.Bug fixes and Stability Improvements
Source:http://www.gammerson.com/2015/09/moto-g-3rd-gen-ota-update-fix-download.html
Click to expand...
Click to collapse
This OTA does not load itself if you have a custom recovery. To avail of this OTA the phone should have the STOCK recovery.
Unlocked bootloader does not matter, but being on STOCK recovery is must for the update to recognize the fingerprint and load the OTA.
After changing the custom recovery to STOCK recovery, phone is stuck at blank screen after the OTA update. Trying to figure out what to do.
Any suggestions?
arunhebbare said:
This OTA does not load itself if you have a custom recovery. To avail of this OTA the phone should have the STOCK recovery.
Unlocked bootloader does not matter, but being on STOCK recovery is must for the update to recognize the fingerprint and load the OTA.
After changing the custom recovery to STOCK recovery, phone is stuck at blank screen after the OTA update. Trying to figure out what to do.
Any suggestions?
Click to expand...
Click to collapse
anyone help i facing the same issue
asrupesh said:
anyone help i facing the same issue
Click to expand...
Click to collapse
I am surprised to notice that after the update the system has vanished and the booting process stops on a blank screen (with screen lit dimly).
No worry. Here is the solution. Flash STOCK firmware....
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Here is the link for the procedure
http://www.gammerson.com/2015/08/how-to-flash-stock-firmware-of-Moto-g-3rd-gen.html
Can some one capture the OTA and make a custom rom flashable file?
Currently my phone is bricked. Will update later.
arunhebbare said:
I am surprised to notice that after the update the system has vanished and the booting process stops on a blank screen (with screen lit dimly).
No worry. Here is the solution. Flash STOCK firmware....
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Here is the link for the procedure
http://www.gammerson.com/2015/08/how-to-flash-stock-firmware-of-Moto-g-3rd-gen.html
Can some one capture the OTA and make a custom rom flashable file?
Currently my phone is bricked. Will update later.
Click to expand...
Click to collapse
I found the solution just clean flash stock rom without root or any modifiction.
Then update, It works perfectly without any problem... I updated by following this method......
asrupesh said:
I found the solution just clean flash stock rom without root or any modifiction.
Then update, It works perfectly without any problem... I updated by following this method......
Click to expand...
Click to collapse
Can u give stock rom link
samarjatt said:
Can u give stock rom link
Click to expand...
Click to collapse
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
asrupesh said:
I found the solution just clean flash stock rom without root or any modifiction.
Then update, It works perfectly without any problem... I updated by following this method......
Click to expand...
Click to collapse
Hi, thank you.
Which stock rom did you use from the link? There are two there for the xt1550. I guess the one with the 23.72-47_cid7(Newer Build) is the one?
If you could elaborate what you did it would help others.
arunhebbare said:
Hi, thank you.
Which stock rom did you use from the link? There are two there for the xt1550. I guess the one with the 23.72-47_cid7(Newer Build) is the one?
If you could elaborate what you did it would help others.
Click to expand...
Click to collapse
No i used Older version 23.72-33... I didnt get update notification in newer 23.72-47 update...
aion11 said:
Not showing up on my US retail version yet.
Click to expand...
Click to collapse
US carriers seem to be much slower pushing out updates. Since they mostly use foreign support it makes little sense. I work for the same company as my carrier, but different division and word I have is they aren't pushing out the update for this phone because the phone isn't in their list of devices yet. BTW, I'd be curious if anyone actually knows someone that got the stagefright bug. You have as big a chance to get struck by lightning as you are in getting stagefright. Anything with Kit Kat or later makes it almost impossible for stagefright to replicate on their phone.
Tel864 said:
US carriers seem to be much slower pushing out updates.
Click to expand...
Click to collapse
The Moto G 3rd gen is sold in the US fully unlocked with no carrier branding. So the carriers don't push out the updates. Motorola generally pushes their updates to India first but the US usually comes soon after.

Fingerprint menu disappeared

Hi, I have recently installed COS 13 SNAPSHOT build and was working fine. I have restarted my phone and got stuck in a boot loop so I have installed latest COS 13 nightly after which fingerprint menu disappeared totally . I have installed turbo ROM after that (after wiping cos nightly) still no fingerprint menu. Anyway to restore the get it working .
getmmg said:
Hi, I have recently installed COS 13 SNAPSHOT build and was working fine. I have restarted my phone and got stuck in a boot loop so I have installed latest COS 13 nightly after which fingerprint menu disappeared totally . I have installed turbo ROM after that (after wiping cos nightly) still no fingerprint menu. Anyway to restore the get it working .
Click to expand...
Click to collapse
Just some ideas I have. Did you install mm firmware?
Otherwise, I have had FP menu disappear twice in the past. Both times it was after my FP sensor was exposed to some water, so essentially it was compromised. Maybe yours was damaged? I tried wiping and flashing and reflashing different ROMs and firmware and it came back about a week later. I believe the FP sensor finally dried and the water was gone from in there so it worked again. So I think when the sensor is damaged it is removed from settings as if it is not there.
Hope this helps.
Try cleaning credentials, maybe this helps.
JonnyAw said:
Just some ideas I have. Did you install mm firmware?
Otherwise, I have had FP menu disappear twice in the past. Both times it was after my FP sensor was exposed to some water, so essentially it was compromised. Maybe yours was damaged? I tried wiping and flashing and reflashing different ROMs and firmware and it came back about a week later. I believe the FP sensor finally dried and the water was gone from in there so it worked again. So I think when the sensor is damaged it is removed from settings as if it is not there.
Hope this helps.
Click to expand...
Click to collapse
What is mm firmware? I haven't installed it. I have installed twrp and flashed cos nighties on top.
getmmg said:
What is mm firmware? I haven't installed it. I have installed twrp and flashed cos nighties on top.
Click to expand...
Click to collapse
MM firmware is the driver package for marshmallow (android 6.0), it allows you to use fingerprint sensor. On the list of things to install for turbo rom Ordenkreiger did not put that you have to install it but it is required for fp sensor. If you check other cm13 based roms here most will be explicit about installing it.
Here is the link for the firmware for our device, just flash it before installing the roms and FP will work: https://www.androidfilehost.com/?fid=24533103863141329
It only needs to be installed once and then you never worry about it when installing other marshmallow roms. That is the same link given in other threads for our Zuk. Hope it works!
Tried flashing mm-firmware but still no fingerprint menu in setting.
does this works for nougat?
JonnyAw said:
MM firmware is the driver package for marshmallow (android 6.0), it allows you to use fingerprint sensor. On the list of things to install for turbo rom Ordenkreiger did not put that you have to install it but it is required for fp sensor. If you check other cm13 based roms here most will be explicit about installing it.
Here is the link for the firmware for our device, just flash it before installing the roms and FP will work: https://www.androidfilehost.com/?fid=24533103863141329
It only needs to be installed once and then you never worry about it when installing other marshmallow roms. That is the same link given in other threads for our Zuk. Hope it works!
Click to expand...
Click to collapse
or any alternative for nougat..
Goku027 said:
or any alternative for nougat..
Click to expand...
Click to collapse
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Try nuclear ROM 1.0.1 beta no issue with finger print and calling no bug for zuk z1
Goku027 said:
or any alternative for nougat..
Click to expand...
Click to collapse
I serch in google and found this file for Nougat:
https://www.androidfilehost.com/?fid=745425885120705241
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
thanks..it worked.
scraptchatella said:
I serch in google and found this file for Nougat:
https://www.androidfilehost.com/?fid=745425885120705241
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
Click to expand...
Click to collapse
now my fingerprint sensor is back.
scraptchatella said:
I serch in google and found this file for Nougat:
I try it (I had the same problem) and i FIXED it!!!
Simply download> Reboot in Recovery and Flash it.
:fingers-crossed:
Click to expand...
Click to collapse
Thanks a lot, worked for me too, after flashing lineage os from cos 12 my finger print option disappeared too. Luckily I found this now every thing works again!
I had the same problem. And tried all the available options like updating mm firmware, Going back to COS 12.1, CM 13, LOS 14.1.... Nothing really worked. For some time finger print worked in COS12.1 and after a while it malfunctioned, and vibrated continuously. Then I have taken to the service center. There they have replaced the whole screen.( dont know the exact reason and the person delivered the mobile is too noob to ask). So what I mean is it is a hard issue upto my knowledge. If your mobile is covered in warranty, give it a try..
This file only makes a penguin logo appear when I boot my rr ROM. Did not provide the finger print option. Hope this does not mess with my phone. Is there any way to remove this thing I flashed?
lineage-14.1-20171031
I cannot find the fingerprint menu. Where should it be? The setup was interrupted and now I cannot find it.
Radhouene90 said:
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Click to expand...
Click to collapse
Well my mic also not works in case i am recording but when i receive a call and put it on loudspeaker it works fine...
Anyone can tell what is that problem??
highdude said:
Well my mic also not works in case i am recording but when i receive a call and put it on loudspeaker it works fine...
Anyone can tell what is that problem??
Click to expand...
Click to collapse
this could be a software problem, what ROM are you using ?
As for my fingerprint, i changed it , it's working ..
Radhouene90 said:
xda is full of Zuk fingerprints problems.
it's a hardware problem. Most of members here suffer from damaged fingerprint.
Click to expand...
Click to collapse
Got my fingerprint working with the Dead Unicorns ROM, while it didn't work with lineage and nuclea.
lg-optimus said:
Got my fingerprint working with the Dead Unicorns ROM, while it didn't work with lineage and nuclea.
Click to expand...
Click to collapse
i tried it but id does not worked , so i bought a new one from ebay
Radhouene90 said:
this could be a software problem, what ROM are you using ?
As for my fingerprint, i changed it , it's working ..
Click to expand...
Click to collapse
I haven't changed my rom yet
My phone isn't even rooted
---------- Post added at 11:41 AM ---------- Previous post was at 11:40 AM ----------
highdude said:
I haven't changed my rom yet
My phone isn't even rooted
Click to expand...
Click to collapse
And i wanna root my phone any suggestions how to do that

November update is here : Let's upgrade

Hello guy's
November update is here : Let's upgrade :good:
But no pie for this moment
It broke my phone...
90.3 MB Lets see if they fix the proximity sensor
---------- Post added at 03:42 PM ---------- Previous post was at 03:35 PM ----------
Agustinm said:
90.3 MB Lets see if they fix the proximity sensor
Click to expand...
Click to collapse
UPdate OK
It seems that proximity sensor is working much better
Oodles47 said:
It broke my phone...
Click to expand...
Click to collapse
Mine too, but the "fix" is to remove your SIM card. Without it, your phone won't go into the bootloop. No need to go for the factory reset just yet...
harmtemolder said:
Mine too, but the "fix" is to remove your SIM card. Without it, your phone won't go into the bootloop. No need to go for the factory reset just yet...
Click to expand...
Click to collapse
Thanks! I'll try it. Already did a factory reset though...
Voniaak said:
Hello guy's
November update is here : Let's upgrade :good:
But no pie for this moment
Click to expand...
Click to collapse
Successfully updated but wht are the improvemnts...did u guys find any ?
proximity sensor is working much better
90.3MB for me it's a security update not an system upgrade so very surprised that the proximity sensor is working much better
cyrillem28410 said:
90.3MB for me it's a security update not an system upgrade so very surprised that the proximity sensor is working much better
Click to expand...
Click to collapse
my proximity is trash here
Enter *#*#64663#*#* for test menu. Go to proximity centre and wave hand close to the sensor so the calibration menu becomes available calibraye and exit.
Whatsapp audio (proximity sensor) and Read/Write emmc speeds (clean big cache) still buugged. no pie and no bug fixes..sad
I haven't got it yet anyone knows why ? My OTA says there are no updates and I still have October security
I sell my phone and buy mate 10
Way more better
emprazol said:
I sell my phone and buy mate 10
Way more better
Click to expand...
Click to collapse
I'm gonna return my phone, too. Never a Xiaomi for me again.
emprazol said:
I sell my phone and buy mate 10
Way more better
Click to expand...
Click to collapse
Well for a double of the price, it should be better !
~500eur vs ~220eur
I know that mate 10 lite was a trash, and it worked like a trash.
Smart Lock stopped working in my device. It was working fine in the October patch.
kvnfjv said:
Whatsapp audio (proximity sensor) and Read/Write emmc speeds (clean big cache) still buugged. no pie and no bug fixes..sad
Click to expand...
Click to collapse
Same here, nothing changed. This is the patch just for security from Google. I think they will fix all this bugs only with Android Pie update, just not to make a double work )
It fix my october update failed issue. Nice .. about 1gb size..
I cant install, error.
I have root and bootloader unlocked, but i have flashed the boot.img to unroot, and still dont installing. Any suggestions? I dont want to flash stock again lol
sergiopjr85 said:
I cant install, error.
I have root and bootloader unlocked, but i have flashed the boot.img to unroot, and still dont installing. Any suggestions? I dont want to flash stock again lol
Click to expand...
Click to collapse
I have unlocked bootloader and had root. I uninstalled Magisk manager and restored the images then used completely uninstall and now it doesn't want to update.
Can anyone help?

Categories

Resources