So when I was on R2BA023 (rooted with the method from Bin4ry, Biktor_gj, jerpelea, et al.) I was able to use the little microphone on the HTC IME mod keyboard, and on the Google Search widget to speak instead of type my messages.
About 3 weeks ago, I re-rooted my phone using some other method on here (and updated to 26), and now I can't do speech to text.
Just wondering if it's because of the root method, or if anyone knows how I can get it back?
Thanks for any help...
somewhere in the settings there is something you select to make it download the speech stuff. you must of done that at some point on the old firmware
Alright, did some research, and basically, you need an app called "Google Search By Voice"...not sure if I put it on, or if it was in the 23 root package, but either way, it's been removed from the market for some reason.
I managed to find the apk, here's a link if anyone else has the same issue:
http://www.mediafire.com/?sharekey=c2bec0e7155dcbb5ab1eab3e9fa335ca9bf4984cd4e3a7d4
chris_knows said:
Alright, did some research, and basically, you need an app called "Google Search By Voice"...not sure if I put it on, or if it was in the 23 root package, but either way, it's been removed from the market for some reason.
I managed to find the apk, here's a link if anyone else has the same issue:
http://www.mediafire.com/?sharekey=c2bec0e7155dcbb5ab1eab3e9fa335ca9bf4984cd4e3a7d4
Click to expand...
Click to collapse
It's been removed in place of Google Voice, which is an all commands in one application for either 2.1 or 2.2. I don't remember which.
Sent from my X10i using Tapatalk
DISCLAIMER: this is not my work, all credits goes to Jenkins (creator of android N-ify)
Pre-requisite:
Having exposed running on your device.
Steps:
1- download and install this Google app (beta) here: http://www.apkmirror.com/apk/google...gle-app-6-6-14-21-arm64-android-apk-download/
2- download and install the latest Android N-ify module (#697) here: https://ci.paphonb.xyz/jenkins/job/AndroidN-ify/
3- once you install them both, activate the module and wipe data and cache of the google app.
4- give permissions to google app. (Don't open it yet)
5- reboot.
And you now have google assistant.
If you can't access google assistant by holding on home button, go to settings--->apps--->advanced--->default apps--->assist and voice input, and then choose google app.
What's the point of making a thread specific to our phone for someone else's work that applies to all MM devices...?
I just shared, that's it
OK Google detection doesn't work properly. I tried using the the original thread's suggestion of training the voice model, then changing the buildprop.
Anyone have any ideas?
Hutch MD said:
OK Google detection doesn't work properly. I tried using the the original thread's suggestion of training the voice model, then changing the buildprop.
Anyone have any ideas?
Click to expand...
Click to collapse
Yes ok google detection have bugs now, we're waiting for an update of Android n-ify to see if it solves the hot word detection.
man your attitude
halomademeapc said:
What's the point of making a thread specific to our phone for someone else's work that applies to all MM devices...?
Click to expand...
Click to collapse
what an A-Hole you are. The guy is just sharing something. I would have never known about this unless he posted this and I need this.
so my friend found a samsung galaxy express 3 from at & t and wanted me to set it up for him. so he gave it to me, first thing i did was factory reset it in recovery mode. Then problems started. I dont have the previous owners account so i need to bypass the google verification. But i have no idea how. ive tried the side sync method, the open with option never showed up. this phone doesn't have usb hosting so i cant use an otg cable. i tried the real term method, just an error when i put the codes. i tried the no computer methods, i can get into ultra power saving mode, but thats it. with the other no computer methods it comes down to restarting it, and when it comes back on theirs camera access but for me when i restart it its locked, but no camera or phone access. ive tried every option i could find and even tried installing a stock ROM, succeeded with the stock rom installation thinking it would remove the google verification but still didn't. does anybody have any ideas? i cant enable USB debugging. so i dont think i can root it and install a custom rom and disable it. at least i think. im new to this stuff so if anybody has suggestions for me then that would be great. Thank you in advance
Google frp bypass. Methods have changed, due to patching. You need to research the most current method. I used Rootjunky's method back in the fall of 2016. Worked like a charm. Consisted of a phony call through an emulator, triggered a request for contact storage, led to browser opening playstore for a vcard app. Download frp bypass app instead, viola!! Imho, too much work for that phone.
I managed to get into chrome. Now what?
So with a bunch of messing around I managed to get into chrome through the emergency call but I'm in chrome. Which is how most methods work is through chrome. U install an app then run it and ur able to bypass it pretty much. But I can't install any apks. When I download a file it ask if I wanna download it, then starts it but never prompts me when it's done so I can't open it and install it. If I redowbload the same file it lets me look at the downloaded files and I can even get to the SD card. But if I tap on anything that's not a folder it kicks me back to the browser. So how could I get on the Samsung store to get es file explorer or install apks? Any help would be great thanks
I've had success setting up a samsung account installing es file explorer, then putting the app needed on sd card or Bluetooth it via a settings app. Rootjunky has the apks. But yes the 911 loophole is there if you don't have a sim to do a realterm dialer method
Hi
I have Axon 7, A2017 (Chinese) with Android 8.0.0 software (ZTE_A2017V3.0.0B11). On the previous version 7.1.1 the problem also occurred. On the Marshmallow version (the first software from the news) everything was fine.
The problem is that some applications such as Google Chrome, Google Maps, Google Dev, Google Canary, Maps Go (uses Google maps) and a few others; SOMETIMES they hang on startup (usually the splashscreen). In the case of Google Maps sometimes hangs immediately after the start (when showing the map). After a temporary suspension, I receive a dialog that the application is not responding - I can close it, wait or send feedback to Google.
This problem does not occur every time. I do not know what it depends on, but sometimes these applications start and work normally. Unfortunately, most often they do not work when I need them most ...
I would like to add that if any of these applications has such a problem, each of the others listed will behave the same - no response. However, if this problem does not occur (the application worked), the others will also start correctly and I will be able to use them until Android does not kill their process.
Does any of you have a similar problem?
------------------------------------------------
To get rid of this bothersome problem, I tried to restore the phone to the factory settings and after the reset do not change anything in the phone / application settings. Did not help.
Next, I tried to downgrade to the previous version of the system (7.1.1) using the official EDL packages provided by ZTE., from: zte.com.cn/china/sitecore/content/device/home/support/detail?id=B4C0ACE418834F588FED0C72D6046C78, package ZTE_A2017V1.0.0B15. On this version (7.1.1) there is the same problem, with the difference that the applications are jamming at startup, with white background (I see splashscreen on Oreo).
Since I remembered that everything worked well on Marshllow, I decided to do a downgrade version 6.0.0 (also from official sources, package: ZTE_A2017V1.0.0B15). Unfortunately, this version of the system from the official source does not work properly for me! Firstly, the phone does not search SIM cards at all. Secondly, WiFi can not be activated on the phone. Third - i can not enable USB debugging! (ie, debugging itself can be enabled, whereas after connecting the phone to a PC, there is no dialog window on the phone with the option of accepting a PC fingerprint). I had to use an SD card to update the system.
Does anyone of you also had a problem with this compile version after roolback?
Regards,
Xerphis
Xerphis said:
Hi
I have Axon 7, A2017 (Chinese) with Android 8.0.0 software (ZTE_A2017V3.0.0B11). On the previous version 7.1.1 the problem also occurred. On the Marshmallow version (the first software from the news) everything was fine.
The problem is that some applications such as Google Chrome, Google Maps, Google Dev, Google Canary, Maps Go (uses Google maps) and a few others; SOMETIMES they hang on startup (usually the splashscreen). In the case of Google Maps sometimes hangs immediately after the start (when showing the map). After a temporary suspension, I receive a dialog that the application is not responding - I can close it, wait or send feedback to Google.
This problem does not occur every time. I do not know what it depends on, but sometimes these applications start and work normally. Unfortunately, most often they do not work when I need them most ...
I would like to add that if any of these applications has such a problem, each of the others listed will behave the same - no response. However, if this problem does not occur (the application worked), the others will also start correctly and I will be able to use them until Android does not kill their process.
Does any of you have a similar problem?
------------------------------------------------
To get rid of this bothersome problem, I tried to restore the phone to the factory settings and after the reset do not change anything in the phone / application settings. Did not help.
Next, I tried to downgrade to the previous version of the system (7.1.1) using the official EDL packages provided by ZTE., from: zte.com.cn/china/sitecore/content/device/home/support/detail?id=B4C0ACE418834F588FED0C72D6046C78, package ZTE_A2017V1.0.0B15. On this version (7.1.1) there is the same problem, with the difference that the applications are jamming at startup, with white background (I see splashscreen on Oreo).
Since I remembered that everything worked well on Marshllow, I decided to do a downgrade version 6.0.0 (also from official sources, package: ZTE_A2017V1.0.0B15). Unfortunately, this version of the system from the official source does not work properly for me! Firstly, the phone does not search SIM cards at all. Secondly, WiFi can not be activated on the phone. Third - i can not enable USB debugging! (ie, debugging itself can be enabled, whereas after connecting the phone to a PC, there is no dialog window on the phone with the option of accepting a PC fingerprint). I had to use an SD card to update the system.
Does anyone of you also had a problem with this compile version after roolback?
Regards,
Xerphis
Click to expand...
Click to collapse
I only experienced that with the chinese oreo betas. Every google app wouldn't start, only a white screen.
Does not happen for me on stock 7.1.1, AOSP or with GSIs.
Unfortunately, until then I could not find a solution to this problem.
Therefore, I am asking you to make an EDL backup (without user data of course). Can any of you make such a copy of your software for A2017?
Xerphis said:
Unfortunately, until then I could not find a solution to this problem.
Therefore, I am asking you to make an EDL backup (without user data of course). Can any of you make such a copy of your software for A2017?
Click to expand...
Click to collapse
Sent you a PM with B15 EDL backup.
Read my PM and please make a backup before flashing it.
bornlivedie said:
Sent you a PM with B15 EDL backup.
Read my PM and please make a backup before flashing it.
Click to expand...
Click to collapse
I also have an Axon 7 chinese (A2017) whit Nougat 7.1.1. (A2017V2.0.0B13)
I have the same problem as Xherpis, exactly the same.
I did the same as Xerphis, I restored the phone to the factory settings, but I still have the same problem.
Could you send me the B15 EDL Backup ?.
If it did not work, I would have to change my phone, because there are many applications that do not work.
Regards.
There is a fix posted on the Edl Oreo page
This link explains how to fix this issue.
Link is here
http://en.miui.com/thread-1682191-1-1.html
Initially, uploading backup did not help me. At the beginning, the applications behaved the same.
It helped to install the Google Services Framework version 8.0.0.-4147944.
I will add that the installation of this framework on the previous system image did not help - but you can try this first..
Hi Xerphis,
What is the final solution then? i am also facing the same issue . i am on A2017 7.1.1 B13 . modem is pretty stable but not the apps which dependent on google. Chrome, maps, paytm etc..
Thanks and regards,
Karidi Prashanth
karidiprashanth said:
Hi Xerphis,
What is the final solution then? i am also facing the same issue . i am on A2017 7.1.1 B13 . modem is pretty stable but not the apps which dependent on google. Chrome, maps, paytm etc..
Thanks and regards,
Karidi Prashanth
Click to expand...
Click to collapse
For me, installing every google apk fixed the issue. I was using B15, though.
You could try the yalp app?
The yalp app was good on a custom ROM I was testing.
This is an alternative to the google play store, however its usually the google play services that cause the crashes, etc
I'm running the B15 Oreo update, the apps are no problem on this, the earlier version before B13 was bad for apps force closing, crashing etc.
Had the same issue, found it to be the google play services, somthing on the last update really f%^&ed things up,
1. force stop
2. clear cache
3. clear all data
4. press 3 dots > uninstall updates
5. let it run... it will start acting strange for 1-2 min that will update the google services again and your good to go.
After installing the backup from @bornlivedie and installing Google Framework Services v8.0.0.-4147944, everything worked well.
Unfortunately, there is a network problem. Namely, I spend a lot of time in the place where the 4G network is starting (the network switches between 3G and 4G continuously), so it increased the battery usage. So in the settings I've always turned on by default 2G / 3G for both cards. Currently, changing these settings - even forcing the 2G network will not change the network mode, and all the time in the top bar I see 3G and 4G.
So I thought that I would return to the stock ROM to see if the problem would disappear. Unfortunately, even after returning to the stock ROM, the problem still exists. Anybody knows what's going on?
@kaplaey2 WOW it's work! It actually helped me. At least for now - I hope it is not a coincidence. I would like to add that the manual installation of the latest version of "Google services" did not help. It really helped uninstalling the update from the application settings. After this, we will receive push notifications to install updates from the play store.
My app was not working
I've got quite a few apk mods off of here that bypass location or needing another app installed like Amazon store. Just wondering if anyone has considered modding Hulu (if it's even possible) to bypass location.
I know it's a new app so it will be a while if it is done, but is anyone else having an issue using the new app?
The new app says I'm at the wrong IP address / zip code and won't let me login.
If I uninstall the update I can login just fine.
I was having an issue with it. It wouldn't even open. Just give me an error saying 'unable to open'. I went into Magisk Manager and selected "Magisk Hide" from the drop down menu. Then scrolled through my apps and checked Hulu. I was then able to open the app and everything worked fine. Didn't even have to restart.
It wouldn't open for me, so I updated it... now it will not register the ok button on my keyboard (only this app, and all other controls work).