Google Play System Updates - OnePlus 6T Questions & Answers

Hello, everyone.
I had to reset my OP6t yesterday and found that there is an update for the Google Play System Updates. After I installed it, my device rebooted and I could see in the settings briefly May 2020 before my device rebooted again. After that, February 2020 was displayed again. Does anyone know the problem and could help me?
OOS 10.3.4
Magisk 20.4
RadioActive Kernel 10.6.9
Thanks

Related

Magisk Manager Upgrade 6.00: No Data or Cell

Last night before turning in I decided to update to the latest version of Magisk Manager, 6.0.0. This morning I turn on the phone and have no cell service or data. I noticed on the main screen of Magisk it only displays Installed Version v17.1 and Uninstall instead of the usual Latest Version, Installed Verision, Tap to Start SafteyNet check, etc.
I have been looking around but can't seem to find any posts with the same issues. At this point tempted to uninstall Magisk and reinstall to see if that fixes it. Anyone have any suggestions.
I have tried restarting the phone, changing the Cell Service from LTE to 3G, removing all forms fingerprint and pattern locks but nothing so far.
Running
Nexus 6P
Lineage 15.1 August build
Magisk 17.1
TWRP : Most recent
Open GApps
Thanks
:good:
I don't believe that Magisk Manager could do that to your device. I'm running the same setup as you and I'm not having any problems, only difference is I'm using magisk v17.2 instead of v17.1. You can find the new version at magisk's github (I'm not able to post links on my messages yet)
Hope it helps!
Zombillano said:
I don't believe that Magisk Manager could do that to your device. I'm running the same setup as you and I'm not having any problems, only difference is I'm using magisk v17.2 instead of v17.1. You can find the new version at magisk's github (I'm not able to post links on my messages yet)
Hope it helps!
Click to expand...
Click to collapse
Thanks for your reply. It turns out it had nothing to do with the software or the phone. We experienced severe weather in the area, something we are not accustomed to, and it took out big areas of our cell network. Sorry for wasting your time. Everything is good now.

How to remove a pending Pie OTA update

Hi there, i searched all over the net, but all i found were older ways to do it.
Anyway, I am on 8.1 and I have a pending Pie update bugging me (restart now to update), I do not want to do it until the camera issues with gcam are completely resolved.
I have unchecked the "automatic system updates" in developer options, but the update was downloaded before that, so it keeps nagging me to update. I am afraid that if my phone reboots / runs out of battery ill end up with Pie (happened to my gf and brother). Camera means more than pie to me
I am unrooted. Tried searching internal storage for anything mentioning OTA but to no success. Can anyone help me find/delete these downloaded temp files?
Thanks,
jaka
Since we have an A/B partition device, maybe the update have already been applied. You can try to disable update app through adb using a computer, but I guess if you reboot, your device will be updated.

Magisk 17.3 and/or Intune portal hider on the 6T

Has anyone managed to get the Intune Portal Hider to to work on the 6T. The version for Magisk 18.xxx gets detected in about 15 minutes. I cannot get Magisk 17.3 to pass Safetynet on the 6T, fails with "API error". The aggravating thing is that this worked without a hitch on the 5 with Magisk 17.3
Check which version of Magisk Manager you have installed. Flashing Magisk 17.3 automatically installs MM 6.0.1. Update it to 6.1.0. I ran into the same issue the other night when I updated to OOS 9.0.12. Magisk 18.1 kept failing SafetyNet checks. Uninstalled it and reinstalled 17.3. I got the same API error until I installed MM 6.1.0.
sharksfan7 said:
Check which version of Magisk Manager you have installed. Flashing Magisk 17.3 automatically installs MM 6.0.1. Update it to 6.1.0. I ran into the same issue the other night when I updated to OOS 9.0.12. Magisk 18.1 kept failing SafetyNet checks. Uninstalled it and reinstalled 17.3. I got the same API error until I installed MM 6.1.0.
Click to expand...
Click to collapse
If I could hit the thanks button 10x I would. interesting that I pass Safety Net without issues for 18
SafetyNet will initially pass on 18.x. But for me at least, after some time it will fail. Toggling Magisk Hide off/on will then allow it to pass SN again. I got a bit obsessive in checking it so it was just less to worry about using 17.3. Can't figure out where the problem is exactly since I can't forcibly reproduce it. But the other night after I updated OOS, Magisk 18.1 passed SN. I went to sleep & the next morning checked SN and it failed. I haven't had any such issues with 17.3.
sharksfan7 said:
SafetyNet will initially pass on 18.x. But for me at least, after some time it will fail. Toggling Magisk Hide off/on will then allow it to pass SN again. I got a bit obsessive in checking it so it was just less to worry about using 17.3. Can't figure out where the problem is exactly since I can't forcibly reproduce it. But the other night after I updated OOS, Magisk 18.1 passed SN. I went to sleep & the next morning checked SN and it failed. I haven't had any such issues with 17.3.
Click to expand...
Click to collapse
I have experienced exactly the same issue in both 18.0 18.1. My banking apps seem to detect root also. Got fed up with it and didn't experience any of these issues with 17.3, so just stick with this version as it does what I need it to do.
dj_ooms said:
I have experienced exactly the same issue in both 18.0 18.1. My banking apps seem to detect root also. Got fed up with it and didn't experience any of these issues with 17.3, so just stick with this version as it does what I need it to do.
Click to expand...
Click to collapse
Magisk 17.3 with Manager 6.1.0 so far is the most stable version you can get until v18 gets improved.
For me it's kinda weird. Intune Hider for 18.1 work for me. Hides what I need and all that. But my mobile data doesn't work. Disable the module and poof it's back.
Edit: Never mind. Got it by disabling a couple apps from Magisk Hide.

July Security Happened Automatiically - Deleted Magisk

Well restarted my phone on the weekend and when it started up a notification showed it was being updated. I had automatic updates turned off. I checked and see I am now on July update.
Magisk manager is still installed but it says Magisk has been uninstalled. The strange this is that the Google Camera is still working.
Has anyone else had something similar happen?
Yes magisk and twrp has been removed
Yes it has happened to me too.
Twrp got removed from boot and also magisk was uninstalled.
Gcam app is also not working
Can anyone help me remove the gcam app from boot.
Thanks in advance
ludditefornow said:
Well restarted my phone on the weekend and when it started up a notification showed it was being updated. I had automatic updates turned off. I checked and see I am now on July update.
Magisk manager is still installed but it says Magisk has been uninstalled. The strange this is that the Google Camera is still working.
Has anyone else had something similar happen?
Click to expand...
Click to collapse
No, had updates turned off since early Oreo and its never updated 'automatically'.
Happened to me also. As it didn't behave like a normal update, I am wary of reinstalling magisk/twrp. Has anyone done it, can they post a link to the guide they used?
Thanks all
Sent from my Mi A1 using Tapatalk
I didnt have twrp installed, but i dontbthink i will bother with Magisk reinstall because gcam is still working.. only problem is that my Viper i stall has gone.. so if i get sick of the low volume through headphones, i will install magisk again
Have installed magisk - or at least have root acess, but magisk manager says it's not installed. Maybe I am doing something wrong. or is it a version release issue. Also is Cosmic Dan's twrp the best way to go with July release
Thanks
M

Update to Oxygen OS 11.0.8.8.IN11BA issue

Hi all,
I was on 11.0.7.7 until yesterday, when I got the notification to update my phone to 11.0.8.8.IN11BA, which I did immediately OTA.
Unfortunately after restart I often get a notification window: "System UI keeps stopping" and my phone returns to home screen.
Very very annoying. I tried to clear Google cashe, uninstalled Google updates, I installed again 11.0.8.8.IN11BA, nothing works. .. Until now I had no issues at all, immediately after update the mess started..
Can somebody help me, any solution?
Thanks in advance!
Oneplus 8 pro EU, 12/256Gb, radioactive kernel 2.2.5
do you have any magisk modules such as nolimits, renovate ice, oos native recorder etc? maybe substratum themes or anything that changes systemui?
I uninstalled all magisk modules I had and now all ok. Thank you for your tip!
Do you have the original or magisk patched boot.img for 11.0.8.8 IN11BA?
If you have one, can you share it?
Thanks!
No, sorry, I have not. I cannot help you.
Thank you!
@sandrosdj, it seems, that gsser upload them, see https://forum.xda-developers.com/t/...r-magisk_patched-guides.4175033/post-85499289

Categories

Resources