Well restarted my phone on the weekend and when it started up a notification showed it was being updated. I had automatic updates turned off. I checked and see I am now on July update.
Magisk manager is still installed but it says Magisk has been uninstalled. The strange this is that the Google Camera is still working.
Has anyone else had something similar happen?
Yes magisk and twrp has been removed
Yes it has happened to me too.
Twrp got removed from boot and also magisk was uninstalled.
Gcam app is also not working
Can anyone help me remove the gcam app from boot.
Thanks in advance
ludditefornow said:
Well restarted my phone on the weekend and when it started up a notification showed it was being updated. I had automatic updates turned off. I checked and see I am now on July update.
Magisk manager is still installed but it says Magisk has been uninstalled. The strange this is that the Google Camera is still working.
Has anyone else had something similar happen?
Click to expand...
Click to collapse
No, had updates turned off since early Oreo and its never updated 'automatically'.
Happened to me also. As it didn't behave like a normal update, I am wary of reinstalling magisk/twrp. Has anyone done it, can they post a link to the guide they used?
Thanks all
Sent from my Mi A1 using Tapatalk
I didnt have twrp installed, but i dontbthink i will bother with Magisk reinstall because gcam is still working.. only problem is that my Viper i stall has gone.. so if i get sick of the low volume through headphones, i will install magisk again
Have installed magisk - or at least have root acess, but magisk manager says it's not installed. Maybe I am doing something wrong. or is it a version release issue. Also is Cosmic Dan's twrp the best way to go with July release
Thanks
M
Related
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
It's working for me with android pay.
Safetynet is passing for me using Magisk v9 & phh's Superuser r266-2, but a new version of each was released last week that chatter in other forums seem to suggest device-specific trouble with. I might try but first wanted to know if anyone else in the LePro3 world already has and had problems. My current interest in safetynet is for Android Pay and DirectvNow.
suhridkhan said:
It's working for me with android pay.
Click to expand...
Click to collapse
Thanks!
robertzas said:
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
Click to expand...
Click to collapse
Linked method is outdated ever since the introduction of November security patch.
Magisk V10 and phh SU r266 working fine for me on 20s
Upgrading worked for me too and I like how safety net check is part of the new status screen.
Seems like known issue but installing Xposed caused safetynet to fail, both before and after upgrade. Uninstalling Xposed caused safety net to pass again.
Root working and safetynet still passing on my x727 after taking the Magisk Manager upgrade to Magisk 11.1 and MagiskSu.
are all of you on a stock ROM and bootloader locked, I am using lineage OS 13, but safety net fails? do you have any idea how to fix this, just wanted to use ANDROID PAY, or do I need to be on STOCK ROM, just don't like the EUI and the status bar icons and the way they look(it's just me). Any help would greatly be appreciated=)
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay. I don't see how safetynet could be expected to fully pass on a non-OEM supported ROM, especially over the longhaul of the cat-and-mouse game.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen, the settings application, and the recents screen which I tolerate so as to have safetynet.
I could not pass safety net, got CM13, with MAGISK installed. Dang=)
squandry said:
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay but I don't see how safetynet could ever pass on a custom ROM.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen and the recents screen which I tolerate so as to have safetynet.
Click to expand...
Click to collapse
Hi, Did this but after installing MAGISK, everything passed, except FINGERPRINT got disabled, says hardware not supported. Android Pay works,just went to gas station and tried it, works flawlessly. FINGERPRINT is the problem I'm seeing now. Thanks for any help.
Sent from my LEX727 using XDA-Developers Legacy app
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
squandry said:
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
Click to expand...
Click to collapse
Yup, what boot image did you install? I think the problem was the boot image I used, are you on the 20's now? thanks
I am running the aboot from dr4stic's 19s unlocked bootloader zip, everything else is from the stock 20s OTA zip.
Ok, I have spent several hours trying to make it work and now time to ask for help. I got Leeco LePro 3 with custom Ron based on EUI, and trying to get Magisk working. First I tried installing system less SuperSU and Magisk, but it failed safety check multiple times, so I tried uninstalling SuperSU and use Magisksu, but not I am not able to move forward. I installed Magisk manager and when it try to install Magisk manager it downloads but doesn't show way to install it, I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
bocondo said:
I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
Click to expand...
Click to collapse
Flashing Magisk with TWRP should work. What do you mean by it fails to update?
Last night before turning in I decided to update to the latest version of Magisk Manager, 6.0.0. This morning I turn on the phone and have no cell service or data. I noticed on the main screen of Magisk it only displays Installed Version v17.1 and Uninstall instead of the usual Latest Version, Installed Verision, Tap to Start SafteyNet check, etc.
I have been looking around but can't seem to find any posts with the same issues. At this point tempted to uninstall Magisk and reinstall to see if that fixes it. Anyone have any suggestions.
I have tried restarting the phone, changing the Cell Service from LTE to 3G, removing all forms fingerprint and pattern locks but nothing so far.
Running
Nexus 6P
Lineage 15.1 August build
Magisk 17.1
TWRP : Most recent
Open GApps
Thanks
:good:
I don't believe that Magisk Manager could do that to your device. I'm running the same setup as you and I'm not having any problems, only difference is I'm using magisk v17.2 instead of v17.1. You can find the new version at magisk's github (I'm not able to post links on my messages yet)
Hope it helps!
Zombillano said:
I don't believe that Magisk Manager could do that to your device. I'm running the same setup as you and I'm not having any problems, only difference is I'm using magisk v17.2 instead of v17.1. You can find the new version at magisk's github (I'm not able to post links on my messages yet)
Hope it helps!
Click to expand...
Click to collapse
Thanks for your reply. It turns out it had nothing to do with the software or the phone. We experienced severe weather in the area, something we are not accustomed to, and it took out big areas of our cell network. Sorry for wasting your time. Everything is good now.
Has anyone managed to get the Intune Portal Hider to to work on the 6T. The version for Magisk 18.xxx gets detected in about 15 minutes. I cannot get Magisk 17.3 to pass Safetynet on the 6T, fails with "API error". The aggravating thing is that this worked without a hitch on the 5 with Magisk 17.3
Check which version of Magisk Manager you have installed. Flashing Magisk 17.3 automatically installs MM 6.0.1. Update it to 6.1.0. I ran into the same issue the other night when I updated to OOS 9.0.12. Magisk 18.1 kept failing SafetyNet checks. Uninstalled it and reinstalled 17.3. I got the same API error until I installed MM 6.1.0.
sharksfan7 said:
Check which version of Magisk Manager you have installed. Flashing Magisk 17.3 automatically installs MM 6.0.1. Update it to 6.1.0. I ran into the same issue the other night when I updated to OOS 9.0.12. Magisk 18.1 kept failing SafetyNet checks. Uninstalled it and reinstalled 17.3. I got the same API error until I installed MM 6.1.0.
Click to expand...
Click to collapse
If I could hit the thanks button 10x I would. interesting that I pass Safety Net without issues for 18
SafetyNet will initially pass on 18.x. But for me at least, after some time it will fail. Toggling Magisk Hide off/on will then allow it to pass SN again. I got a bit obsessive in checking it so it was just less to worry about using 17.3. Can't figure out where the problem is exactly since I can't forcibly reproduce it. But the other night after I updated OOS, Magisk 18.1 passed SN. I went to sleep & the next morning checked SN and it failed. I haven't had any such issues with 17.3.
sharksfan7 said:
SafetyNet will initially pass on 18.x. But for me at least, after some time it will fail. Toggling Magisk Hide off/on will then allow it to pass SN again. I got a bit obsessive in checking it so it was just less to worry about using 17.3. Can't figure out where the problem is exactly since I can't forcibly reproduce it. But the other night after I updated OOS, Magisk 18.1 passed SN. I went to sleep & the next morning checked SN and it failed. I haven't had any such issues with 17.3.
Click to expand...
Click to collapse
I have experienced exactly the same issue in both 18.0 18.1. My banking apps seem to detect root also. Got fed up with it and didn't experience any of these issues with 17.3, so just stick with this version as it does what I need it to do.
dj_ooms said:
I have experienced exactly the same issue in both 18.0 18.1. My banking apps seem to detect root also. Got fed up with it and didn't experience any of these issues with 17.3, so just stick with this version as it does what I need it to do.
Click to expand...
Click to collapse
Magisk 17.3 with Manager 6.1.0 so far is the most stable version you can get until v18 gets improved.
For me it's kinda weird. Intune Hider for 18.1 work for me. Hides what I need and all that. But my mobile data doesn't work. Disable the module and poof it's back.
Edit: Never mind. Got it by disabling a couple apps from Magisk Hide.
So recently, I had to unroot my phone because I need snapchat working. I was using Magisk with the newest update and EdXposed. Everything was fine until I got struck by a suprise 12 hour ban, yeah no big deal, I wasn't even using root for much else but changing the boot animation at the time.
This is where it gets interesting, after multiple restarts disabling modules and then finally uninstalling Magisk, I get struck by a mesagge that the phone is corrupted and can't be trusted. I got a mini heartattack from this but after starting my phone, nothing is weird or out of place, bootloader is still unlocked and updating the phone works.
My question is, what will this affect that I haven't realised yet and is there any way to prevent that message from appearing?
I think Magisk Hide can do something. Just turn on Magisk Hide and in its section turn on Snapchat.
Hi all,
I was on 11.0.7.7 until yesterday, when I got the notification to update my phone to 11.0.8.8.IN11BA, which I did immediately OTA.
Unfortunately after restart I often get a notification window: "System UI keeps stopping" and my phone returns to home screen.
Very very annoying. I tried to clear Google cashe, uninstalled Google updates, I installed again 11.0.8.8.IN11BA, nothing works. .. Until now I had no issues at all, immediately after update the mess started..
Can somebody help me, any solution?
Thanks in advance!
Oneplus 8 pro EU, 12/256Gb, radioactive kernel 2.2.5
do you have any magisk modules such as nolimits, renovate ice, oos native recorder etc? maybe substratum themes or anything that changes systemui?
I uninstalled all magisk modules I had and now all ok. Thank you for your tip!
Do you have the original or magisk patched boot.img for 11.0.8.8 IN11BA?
If you have one, can you share it?
Thanks!
No, sorry, I have not. I cannot help you.
Thank you!
@sandrosdj, it seems, that gsser upload them, see https://forum.xda-developers.com/t/...r-magisk_patched-guides.4175033/post-85499289