Related
Hi,
I want to buy a Note 4 and absolutely need root on it. I just found some ugly stuff about rooting it:
http://forum.xda-developers.com/note-4-att/help/root-samsung-sm-n910a-5-1-1-build-t3355869
quote:
----------------------
forgot to tell you the two U.S. carriers that put locks on their bootloaders is AT&T and VERIZON so i wouldnt recommend root unless you unlock bootloader or else your phone will continueously stay in boot mode without letting you exit. that i believe is a bootloop good luck
-----------------------
Since I can chose which one I buy, I obviously want to get the one that can be rooted. It does not have to be easy, I have used odin in the past, no problem. There are quite a few versions out there though, and I'm a little confused which ones will work. Looks to me like that N910A is out and root pretty much impossible.
I have my eyes on the canada version: N910W8
What about the T-mobile version?
Thanks,
Markus
browny_amiga said:
Hi,
I want to buy a Note 4 and absolutely need root on it. I just found some ugly stuff about rooting it:
http://forum.xda-developers.com/note-4-att/help/root-samsung-sm-n910a-5-1-1-build-t3355869
quote:
----------------------
forgot to tell you the two U.S. carriers that put locks on their bootloaders is AT&T and VERIZON so i wouldnt recommend root unless you unlock bootloader or else your phone will continueously stay in boot mode without letting you exit. that i believe is a bootloop good luck
-----------------------
Since I can chose which one I buy, I obviously want to get the one that can be rooted. It does not have to be easy, I have used odin in the past, no problem. There are quite a few versions out there though, and I'm a little confused which ones will work. Looks to me like that N910A is out and root pretty much impossible.
I have my eyes on the canada version: N910W8
What about the T-mobile version?
Thanks,
Markus
Click to expand...
Click to collapse
AT&T and Verizon should be avoided, otherwise you can just flash super-su via odin.
browny_amiga said:
Hi,
I want to buy a Note 4 and absolutely need root on it. I just found some ugly stuff about rooting it:
http://forum.xda-developers.com/note-4-att/help/root-samsung-sm-n910a-5-1-1-build-t3355869
quote:
----------------------
forgot to tell you the two U.S. carriers that put locks on their bootloaders is AT&T and VERIZON so i wouldnt recommend root unless you unlock bootloader or else your phone will continueously stay in boot mode without letting you exit. that i believe is a bootloop good luck
-----------------------
Since I can chose which one I buy, I obviously want to get the one that can be rooted. It does not have to be easy, I have used odin in the past, no problem. There are quite a few versions out there though, and I'm a little confused which ones will work. Looks to me like that N910A is out and root pretty much impossible.
I have my eyes on the canada version: N910W8
What about the T-mobile version?
Thanks,
Markus
Click to expand...
Click to collapse
910t is mod friendly. To root a 910t, you flash Odin and load SuperSU (systemless) as indicated above or flash a permissive kernal and system level root. It is also compatible with att network if that is your carrier. Just need to unlock it.
Thanks guys, that helps, I will go for a 910t then.
weard1212 said:
AT&T and Verizon should be avoided, otherwise you can just flash super-su via odin.
Click to expand...
Click to collapse
Bit of a noob, but I'm a bit confused. If I buy an "Unlocked" Verizon phone like the SM-N910V, would I be able to use any custom roms?
I was about to buy either the N910V (Verizon) or N910W8 (Verizon/North America)
Can't the Verizon & AT&T be rooted with Chainfire AutoRoot?
joebelachi said:
Bit of a noob, but I'm a bit confused. If I buy an "Unlocked" Verizon phone like the SM-N910V, would I be able to use any custom roms?
I was about to buy either the N910V (Verizon) or N910W8 (Verizon/North America)
Can't the Verizon & AT&T be rooted with Chainfire AutoRoot?
Click to expand...
Click to collapse
Only if you buy a developer edition verizon model and last time I checked they were upwards of around $800. Your best bet is W8 or T. I did all the research like you and ended up buying a T and have never been happier
joebelachi said:
Bit of a noob, but I'm a bit confused. If I buy an "Unlocked" Verizon phone like the SM-N910V, would I be able to use any custom roms?
I was about to buy either the N910V (Verizon) or N910W8 (Verizon/North America)
Can't the Verizon & AT&T be rooted with Chainfire AutoRoot?
Click to expand...
Click to collapse
(Unlocked means sim unlocked)
Bootloader Unlocked verizon phones can be flashed with a custom rom, and if you get a verizon phone, I suggest a Bootloader unlocked one. Verizon and AT&T phones with locked bootloaders can't be rooted with Chainfire. Chainfire should NOT be used on a phone with a locked bootloader because it flashes partitions and will most likely hard brick your phone. I would still sugest against a Bootloader non-unlocked Verizon or AT&T phone. Also using a custom recovery or odin to flash super-su has worked much better for me with a lot less less risk than Chainfire.
Whatever you decide upon dont get the EDGE. it needs special roms, and it wont work with gear VRs. i have the euro verison, and didnt have any problems rooting. cf-autoroot and done.
Really appreciate the responses guys. Especially for the clarification around Unlocking ("Unlocked means the bootloader").
I'll check out what custom ROMS work on the Verizon (910V).
Are there more ROMS for the 910W8's or the 910V's. Also if I go stock on the W8s, I would have to choose a Canadian carrier.
I'll definitely stay away from the EDGE, didn't really like it anyway
joebelachi said:
Really appreciate the responses guys. Especially for the clarification around Unlocking ("Unlocked means the bootloader").
I'll check out what custom ROMS work on the Verizon (910V).
Are there more ROMS for the 910W8's or the 910V's. Also if I go stock on the W8s, I would have to choose a Canadian carrier.
I'll definitely stay away from the EDGE, didn't really like it anyway
Click to expand...
Click to collapse
Careful there, usually 'unlocked' like on Swappa or similar means carrier unlocked, not boot loader unlocked.
hey there.
so short version.
i got a sprint s7, apparently it was not carrier unlocked when i got it. sprint says they will only unlock it if it's on an active service in good standing which i dont plan on getting on sprint at all. so i need a trusted place to get the unlock codes for it please, the cheaper the better because of my situation.
longer version.
my dad has early onset dementia so we had to take his phone from him and close his account. it's been a while and i found his S7 sitting there not doing anything and i need a new phone to put on my Verizon prepaid plan so after looking on the s7 the hardware is all the same just the firmware blocks out whichever bands each carrier chooses. so i need to go tomorrow and get one of Verizon sims to be ready so when i get the unlock code i can put it in right away and make sure i dont receive that sim error. or do i need to flash to the verizion firmware before i try to carrier unlock it?
any and all help is really appreciated as our family is really struggling atm and not having to purchase a new phone would save us alot of money.
p.s. device info is sm-g930p
baseband g930pvps4bqc1
android version 7
Here's a link to the remote unlocking service I used to have my 930P unlocked: https://www.gsmzambia.com/product/samsung-sprint/
You'll have to install Teamviewer and let them remotely control your PC to perform the unlock. I found them to be very reputable and helpful before, during and after the sale.
After unlocking, I'd recommend using Odin (https://www.androidfilehost.com/?fid=24591023225177749) to flash the "U" firmware: http://updato.com/firmware-archive-select-model?record=52EF42AE925C11E7963AFA163EE8F90B
With U firmware, you won't have any of the Sprint bloatware that came preloaded on the phone, and it'll automatically detect and apply the proper settings for whichever SIM card you insert. If you don't want to flash alternate firmware, you can stick with what's already on the phone; you'll just have to manually enter the Verizon APN settings.
QJ3 <stock sprint> updated the bootloader from v4 to v5. Just a heads up for those of you wanting to flash the U firmware and getting errors.
So, probably a dumb question, but what do I need to do to avoid the errors? I messed up trying to flash a T-Mobile rom right after updating the firmware, and now I can't boot. I can get to download mode, but can't find a firmware that will flash without failing.
From what reading I've done, I need to find a newer firmware than the one that was on my phone originally, but I can't seem to find anything that will work.
prnorm said:
So, probably a dumb question, but what do I need to do to avoid the errors? I messed up trying to flash a T-Mobile rom right after updating the firmware, and now I can't boot. I can get to download mode, but can't find a firmware that will flash without failing.
From what reading I've done, I need to find a newer firmware than the one that was on my phone originally, but I can't seem to find anything that will work.
Click to expand...
Click to collapse
You should be able to flash QJ3 or maybe the latest tmob one. Check sammobile or updato... Just checked, not posted yet. Have you tried a Google search for the qj3 firmware?
lvpre said:
You should be able to flash QJ3 or maybe the latest tmob one. Check sammobile or updato... Just checked, not posted yet. Have you tried a Google search for the qj3 firmware?
Click to expand...
Click to collapse
Thank you, I wasn't sure what the latest version is so that helps. I did try flashing the latest T-Mo and Sprint firmwares on both Sammobile and updato.com, but it looks like neither are newer than QJ3 so I guess that's my problem. I'll just search or wait to find a new version posted. This phone isn't a daily driver so it's not critical right now.
prnorm said:
Thank you, I wasn't sure what the latest version is so that helps. I did try flashing the latest T-Mo and Sprint firmwares on both Sammobile and updato.com, but it looks like neither are newer than QJ3 so I guess that's my problem. I'll just search or wait to find a new version posted. This phone isn't a daily driver so it's not critical right now.
Click to expand...
Click to collapse
I had the same issue and just loaded the latest PIT. It allowed me to start my phone with my old Sprint OS.
Here is a version of the QJ3 zip for odin.
Click Here
You should be able to flash and restore your phone
lvpre said:
Here is a version of the QJ3 zip for odin.
Click Here
You should be able to flash and restore your phone
Click to expand...
Click to collapse
Thanks so much, this worked perfectly.
Has anyone tried going to the u firmware via pit file? I remember this working in the past. You have to flash the version pit file and previous stock rom, then you could flash the u rom.
Is there any way to downgrade bootloader from P version and then install U version?
Meerk4t said:
Is there any way to downgrade bootloader from P version and then install U version?
Click to expand...
Click to collapse
Maybe. About a year ago, you could load a PIT file. Not sure if that method works with the newest bootloader. @spamforme mentioned something about it a few posts ago.
Meerk4t said:
Is there any way to downgrade bootloader from P version and then install U version?
Click to expand...
Click to collapse
Right now there is no way to downgrade to install the U version software. Sprint upgraded to the version 5 bootloader and is the only carrier in the US to do so, so you can't install any other carrier software on your S7 or S7 Edge right now once you have Sprint software installed on it. I have a SM-G930U I took to sprint this past July under the 1 year free service before taxes promotion. Fully unlocked version I purchased online, after having trouble installing a Sprint sim, I had to go in to the store to get the phone to activate.
Once activated Sprint sim locked my unlocked phone(found this out 2 months later when I tried to put another sim in it.) At this point it was still running the SM-G930U Unlocked firmware. I escalated a sim unlock request in September, 2 months pasted and they still didn't unlock my phone. I ended up having to go back in to a Sprint Store to facilitate the unlock, and during that process the Sprint store, flashed my phone to 5BQJ3, that being said, after they did that to unlock my phone they were unable to put the Unlocked firmware back on the phone in the store, I have failed to put the unlocked firmware back on my phone since also, I have escalated this to Samsung, as my phone is under warranty and Samsung say there is nothing they can do. So Sprint sim locked my unlocked phone, and during the process of getting my sim unlocked phone back unlocked, they hijacked my phones software and put all the sprint bloatware and malware on my S7 SM-G930U unlocked phone, and it can't be removed currently as Sprint is the only carrier using bootloader 5 in the US.
I ended up filling out a complaint with the FCC about this last week, and waiting for Sprint to respond as the FCC filed the complaint with Sprint on December 22, 2017. and they have 30 days to respond. But I have tried everything I can think of to get the phone back to the U version software without any resolve. As far as I am concerned Sprint owes me a replacement Samsung Galaxy S7 Unlocked phone or newer model, and right now the only "Unlocked" variant Samsung phone Sprint even stocks is the new S8 Active SM-G892U phone which is the same phone for Sprint as it is for T-Mobile; but we shall see what happens I am not holding my breath with Sprint and will probably just have to take them to small claims court for the replacement cost of my phone as it is cheaper than submitting a formal grievance with the FCC is the informal one doesn't solve the issue.
is there any other carrier firmware with the same bootloader version that i can flash to? i need a phone for Verizon, i'm stuck on the sprint firmware. there's a band that is disabled on the sprint one. hopefully one of the others, if there is one available, will have the bands needed enabled.
oponewbie said:
Right now there is no way to downgrade to install the U version software. Sprint upgraded to the version 5 bootloader and is the only carrier in the US to do so, so you can't install any other carrier software on your S7 or S7 Edge right now once you have Sprint software installed on it. I have a SM-G930U I took to sprint this past July under the 1 year free service before taxes promotion. Fully unlocked version I purchased online, after having trouble installing a Sprint sim, I had to go in to the store to get the phone to activate.
Once activated Sprint sim locked my unlocked phone(found this out 2 months later when I tried to put another sim in it.) At this point it was still running the SM-G930U Unlocked firmware. I escalated a sim unlock request in September, 2 months pasted and they still didn't unlock my phone. I ended up having to go back in to a Sprint Store to facilitate the unlock, and during that process the Sprint store, flashed my phone to 5BQJ3, that being said, after they did that to unlock my phone they were unable to put the Unlocked firmware back on the phone in the store, I have failed to put the unlocked firmware back on my phone since also, I have escalated this to Samsung, as my phone is under warranty and Samsung say there is nothing they can do. So Sprint sim locked my unlocked phone, and during the process of getting my sim unlocked phone back unlocked, they hijacked my phones software and put all the sprint bloatware and malware on my S7 SM-G930U unlocked phone, and it can't be removed currently as Sprint is the only carrier using bootloader 5 in the US.
I ended up filling out a complaint with the FCC about this last week, and waiting for Sprint to respond as the FCC filed the complaint with Sprint on December 22, 2017. and they have 30 days to respond. But I have tried everything I can think of to get the phone back to the U version software without any resolve. As far as I am concerned Sprint owes me a replacement Samsung Galaxy S7 Unlocked phone or newer model, and right now the only "Unlocked" variant Samsung phone Sprint even stocks is the new S8 Active SM-G892U phone which is the same phone for Sprint as it is for T-Mobile; but we shall see what happens I am not holding my breath with Sprint and will probably just have to take them to small claims court for the replacement cost of my phone as it is cheaper than submitting a formal grievance with the FCC is the informal one doesn't solve the issue.
Click to expand...
Click to collapse
Wow - nice persistence following up with FCC! Would love to hear how that gets resolved. I'm also stuck with a 930P v5 bootloader and no way to install 930U firmware. What is the best way to track 930U firmware bootloader versions so that I know if/when v5 is released?
kpl388 said:
Wow - nice persistence following up with FCC! Would love to hear how that gets resolved. I'm also stuck with a 930P v5 bootloader and no way to install 930U firmware. What is the best way to track 930U firmware bootloader versions so that I know if/when v5 is released?
Click to expand...
Click to collapse
G930UUES4BQL1 is bootloader 4.
G930UUEU2APG9 is bootloader 2.
G930PVPU5BQJ3 is bootloader 5.
At the end, go 5 digits back and you will get the boot binary version. So when the U firmware gets to G930UXXX5XXXX it should be good to go. Based on the U history, it looks like the bootloader will get updated if/when oreo gets dropped to the device. It seems like they went with 2 for MM; 4 for Nougat; and hopefully 5 for Oreo. Every carrier seems to be updating the bootloader version about 5 months before the actual release of the new OS...maybe that means that Sprint will be the first to receive Oreo.
lvpre said:
G930UUES4BQL1 is bootloader 4.
G930UUEU2APG9 is bootloader 2.
G930PVPU5BQJ3 is bootloader 5.
At the end, go 5 digits back and you will get the boot binary version. So when the U firmware gets to G930UXXX5XXXX it should be good to go. Based on the U history, it looks like the bootloader will get updated if/when oreo gets dropped to the device. It seems like they went with 2 for MM; 4 for Nougat; and hopefully 5 for Oreo. Every carrier seems to be updating the bootloader version about 5 months before the actual release of the new OS...maybe that means that Sprint will be the first to receive Oreo.
Click to expand...
Click to collapse
Thanks so much for the great info!
If we wait for oreo and it has bootloader 5 then it will be great assuming we do not update the sprint oreo first potentially changing the bootloader version number again. Would be great but I guess now we will just wait and see
oponewbie said:
Right now there is no way to downgrade to install the U version software. Sprint upgraded to the version 5 bootloader and is the only carrier in the US to do so, so you can't install any other carrier software on your S7 or S7 Edge right now once you have Sprint software installed on it. I have a SM-G930U I took to sprint this past July under the 1 year free service before taxes promotion. Fully unlocked version I purchased online, after having trouble installing a Sprint sim, I had to go in to the store to get the phone to activate.
Once activated Sprint sim locked my unlocked phone(found this out 2 months later when I tried to put another sim in it.) At this point it was still running the SM-G930U Unlocked firmware. I escalated a sim unlock request in September, 2 months pasted and they still didn't unlock my phone. I ended up having to go back in to a Sprint Store to facilitate the unlock, and during that process the Sprint store, flashed my phone to 5BQJ3, that being said, after they did that to unlock my phone they were unable to put the Unlocked firmware back on the phone in the store, I have failed to put the unlocked firmware back on my phone since also, I have escalated this to Samsung, as my phone is under warranty and Samsung say there is nothing they can do. So Sprint sim locked my unlocked phone, and during the process of getting my sim unlocked phone back unlocked, they hijacked my phones software and put all the sprint bloatware and malware on my S7 SM-G930U unlocked phone, and it can't be removed currently as Sprint is the only carrier using bootloader 5 in the US.
I ended up filling out a complaint with the FCC about this last week, and waiting for Sprint to respond as the FCC filed the complaint with Sprint on December 22, 2017. and they have 30 days to respond. But I have tried everything I can think of to get the phone back to the U version software without any resolve. As far as I am concerned Sprint owes me a replacement Samsung Galaxy S7 Unlocked phone or newer model, and right now the only "Unlocked" variant Samsung phone Sprint even stocks is the new S8 Active SM-G892U phone which is the same phone for Sprint as it is for T-Mobile; but we shall see what happens I am not holding my breath with Sprint and will probably just have to take them to small claims court for the replacement cost of my phone as it is cheaper than submitting a formal grievance with the FCC is the informal one doesn't solve the issue.
Click to expand...
Click to collapse
Did we ever get an update on this?
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
I'm not entirely sure if this will work on the S10+, I haven't tried it yet, but when I had the S8+(it was from Verizon as well), I'd take it internationally with a different sim card, it would just prompt me to reboot the phone and it would automatically apply the appropriate CSC settings. I was on stock VZW firmware as well and VoLTE worked (wifi calling didnt).
You should be fine either way though, people have successfully flashed the U1 firmware on their VZW devices for the S10+, so you shouldn't have any issues getting your AT&T sim card to work on it.
Edit: link to get the U1 firmware
https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
aroy97 said:
I'm not entirely sure if this will work on the S10+, I haven't tried it yet, but when I had the S8+(it was from Verizon as well), I'd take it internationally with a different sim card, it would just prompt me to reboot the phone and it would automatically apply the appropriate CSC settings. I was on stock VZW firmware as well and VoLTE worked (wifi calling didnt).
You should be fine either way though, people have successfully flashed the U1 firmware on their VZW devices for the S10+, so you shouldn't have any issues getting your AT&T sim card to work on it.
Edit: link to get the U1 firmware
https://forum.xda-developers.com/s10-plus/how-to/sm-g975u-firmware-downloads-tmo-spr-att-t3908657
Click to expand...
Click to collapse
I wish Samsung included the BYOD update in the S10+, that would make it so much easier. I think I'm just gonna make the trade.
I've read through that thread and that's what I think I'm going to do. I'd much rather flash the AT&T version, but seeing as how it's not available, the U1 will do fine until it's released. I'll just need to switch to a different voicemail service in the meantime. lol
I got a Verizon S10+ and it is running build PPR1.180610.011.G975USQS2ASGB, I have confirmed that putting an AT&T SIM gives me network ability to call and what not. I want to flash the stock U1 branded firmware, is it okay if I flash G975U1UEU1ASD8 with Odin?
SimplyNando said:
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
Click to expand...
Click to collapse
HEY I know have the same problem... Does it work.., I have installed the firmware and all so should I go for it.., waiting for your reply
I have Verizon unlocked phone and I'm able to use internationally where there is no Verizon, but I'm not getting updates so I have downloaded latest firmware should I flash it, also now I don't need any Verizon sim after flashing right ?
Yes you can flash U1 firmware to a U device and vica versa. The U means Universal, so you can flash AT&T, Verizon, T-mobile, or unlocked firmware to it. You gotta use the patched version of Odin though.
SimplyNando said:
Hello! I've been out of the Android scene for a few years so I have a question that I can't seem to find the answer to by searches.
Can I flash the unlocked U1 firmware to a Verizon S10+ and use it on AT&T? I know I'll lose VoLTE and WiFi calling, but I don't really care about those. Mainly, I'm just trying to see if I can use a Verizon S10+ on AT&T. Ideally, I'd like to flash the AT&T firmware on the device but from what I've gathered, that firmware isn't available yet.
I had a Galaxy S8+ when it came out and I used Odin to flash between U1 and AT&T firmware so the process isn't entirely new to me.
A bit of background:
I'm looking to jump off of the dead iPhone train and hop back into Android with the S10+. I'm currently trying to sell/trade my iPhone XS Max in order to make the switch.
I have someone who is willing to trade me their Black S10+ for my iPhone as an even trade but their S10+ is from Verizon. It's unlocked but it's still running the stock Verizon firmware.
I just want to know what I have to do with this trade in order for it to work for me. I want to make sure I get a phone I can use. Any advice or input would be greatly appreciated!
Thanks for any help!
Click to expand...
Click to collapse
As Just changing csc without installing the system is more than enough. Even the company logo changes. Just look for the samkey program and you will see
I have an old Tmobile S7E on old ass firmware (Android 7.0 BQE1) and it's already rooted. I just went through Tmobiles Device Unlock process and I believe the phone was unlocked successfully. I'm looking to upgrade to the latest firmware that still allows rooting. I've looked through the Custom Roms threads and can't tell which one is the latest. I am also wondering if I need to use Verizon firmware or stay on Tmobile firmware.
For instance, this thread here: by jrkruse, he mentions to another user in the comments "This one or verizon one? This one just has the Tmobile csc stuff added and a build.prop for gsm carriers thats it" so it made me wonder if I'm using Verizon service but it's a Tmobile phone if this would work. I know Verizon is CDMA so him saying gsm carriers made me think it may not work.
I know this device is old and this thread doesn't get browsed as much anymore so hopefully I can get some answers. If I can't get this working I guess I'll just be getting a new 2020 model phone :highfive:
Thanks guys!