So I was trying some custom roms and wanted to download crDroid but the wifi and sim card didn't work so I decided to stay with stock miui. I flashed the original rom in MI flash tool but when it finished it didn't reboot but stayed on a blank screen and I can't do anything because if I try to flash miui it says "Can't recieve hello packet"
Edit: I've found the solution! Hhttps://forum.xda-developers.com/redmi-note-7/how-to/how-to-fix-hardbricked-redmi-note-7-t3916512
This guide might help you. Also read the comments because the OP put a link to a flash tool there which i used.
Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
Hello everyone,
Im using my yureka since more than a year...I hav rooted, changed roms, kernels, softbricked, hardbricked and debricked and got rid of such sort of problems by following the posts in xda.
A month ago, i flashed stock rom cm11, rooted and flashed twrp recovery.. It worked good with no problems, but today while iam chatting, my phone freezed all of a sudden and switched off with no cause and thats it...ENDLESS BOOTLOOP!! :crying:
I tried flashing stock rom and other roms too...but same condition...bootloop continues...!! anyone expert or who know how to overcome this problem please help me in reviving my phone back to working...!! :crying: :crying:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
ravi44teja said:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
Click to expand...
Click to collapse
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Abhi_569 said:
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Click to expand...
Click to collapse
thanks for ur reply buddy...i tried ur suggestion...but didnt work..
actually, when no procedures worked, i myslf hardbricked phone by flashing cm12.1 using kitkat flashtools, its screen gone blank and bricked and then i used the sd card method of debricking mentioned here http://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112
it then came upto cyanogen logo and hanging there, i tried flashing cm12.0 and same stuck at cyanogen logo..then i flashed cm11 stock rom, it booted up and switched on...
but now,
(1) wifi not switching on,
(2)Internal memory corrupted and showing error while opening file explorer as "there is no information available for the file system" , "the file or folder was not found" and internal memory not showing in pc..
(3) while opening camera it shows "revert to default file location", "insert SD card before using the camera" and unable to capture photos
(4) while trying to take screenshot, in notification panel it shows "couldnt capture screenshot, couldnt save screenshot, storage may be in use"
(5)sim cards not detecting at all
in cm 12.0 and 12.1, its nomore beyond cyanogen logo...:crying:
Fixied ?
Hell7 said:
Fixied ?
Click to expand...
Click to collapse
not yet bro
hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.
Hello, i decided to open new thread because I nowhere find solution. My problem is that after flashing my moto g2 with omni 6.0.1 it get stuck on warning message (about unlocked bootloader). Now I can only get into bootloader menu, connect phone to PC (it's showing dewice as motorola dadb interface),I can only flash twrp using fastboot (fastboot boot twrp.img) and that's it. I can not flash anything permanently to the phone: any custom recovery, any rom,can't fix it with logofix.It just look like phone doesn't accept any flash. I tried also to change boot and other img but with no succes, always after any operation when I reboot phone it's get to warning message.
My phone is motorola 2G xt1068, 8gb, bootloader ver 48.87. Once I tried to flash it with retail rom from sd card via twrp 3.8.0.1 it shows that previous system was omni-titan 6.0.1 and retaildsdsall can not be flash,always shows error 7.
I wonder if I can flash it with upper version of omni: 7.0.1 to fix the problem with booting the phone.
If You could give me any advise how to solve the problem, I would be very appreciate.
Waitng for your reply Guys.
After a lot of tryes I found that anythig I do on the phone after restart it's getting to the same state, even if I manually deleted folder "Firmware", after reboot it's going back. When I prepared Moto for installing new rom using Philz recovery, all the data stay on it's place ( I mean private data like thumbnails in DCIM folder etc), nothing dissapeared. It's look like it have some copy of the system in internal storage and always after rebooting it's recovering it back, even if the system is flashed by new rom.
Have U any idea what's wrong with this phone?
Additinally I found that a lot of internal memory is busy: over 4500MB and free is only 780MB. Even after wiping everything, also formatting system.Should it be like this?
Edit: 2018-02-15
Ok, if noone could help me let's treat it as a blog.
Digging in google I found spanish site with a lot of custom roms for motorola. Now I'm trying one by one till I found the right one.
It's a pitty that Father's of the omni rom leaving me lonely in that situation, I think that they are the best of source of informations about that rom.
2018.02.19
I tried to install OmniRom 6.0.1 Homemade but on the beginning I had the infothat installation failed with error 7. So I found the solution to change the information in meta-info folder.I did it but when instalation started after "symlinkig" it stopped with error: some symlinks failed, error 7. And again I stucked.I feellike I'm very close of the solution but I need help. I'm using twrp 3.2.1.0 running via fastboot (boot twrp.img).
Hi Fellas,
Need your help in making my old lenovo A6000plus working again.
I have tried flashing 4 roms so far and got error 7 on 3 out of four. I cant download many roms and try them because of low internet data availability. I hope you can understand.
Out of 4 roms i was only able to flash Lineage OS android 10 rom by dev harsh. But unfortunately that just seems stucked on booting screen and taking eternal to boot. i waited like 4 hours to get that finished but that never did. I guess something is wrong there.
I need your immediate help to make my old phone alive again. i want to give this phone to my younger brother so that he could study from Internet.
I am using TWRP 3.2.2.0.
Consider me kind of noob in resolving issues while flashing.
Thanks in advance.
the same to you
The question is same to you
TWRP Error
Try installing the newest PitchBlack Recovery, I also had problems with stock TWRP, especially 3.2.2, the Pitchblack recovery is based on TWRP 3.3.1, and should solve your problems, if still not, check that the bootloader is unlocked, the system partition isn't read only, and format every partition (not the sd card ofcourse XD)
You can download PitchBlack recovery here: sourceforge.net/projects/pbrp/files/a6000/PitchBlack-a6000-2.9.0-20181119-1229-OFFICIAL.zip/download[/url]
It's a sourceforge link, since they no longer support the a6000
Have a nice day and hope this helps :highfive: