Hi
Is there a way to know how much data is being downloaded via data connection? that could be reset every month for exemple? some sort of a counter like there exists for sms or calls...
and is there also a way to turn off data connection automatically after it has not been used for a while?
thanks
There is app SPB Wireless Monitor!
hi
thanks for your answer... I was thinking of something much simpler.. just a basic "how much has been transfered since xxx"
how about the automatic shut off of data connection?
is there at least a simple app that can shut down data conncection after a certain amount of time it is not being used?
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me
Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?
Eh no cause on the galaxy tab the battery cant be removed
NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.
no Im not using a bt PAN to connect the inet, only normal bluetooth data usage
Push
Just only me who is facing this annoing problem?
Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out
I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.
It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.
Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.
try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun
I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..
Help!!! After update to 7.0 my phone has trouble connecting to WiFi. It's not mynetwork because other devices connect and it happens at my workplace too. I've tried clearing the partition cache, restarting it and forgetting the WiFi. Even putting it into airplane mode for a few minutes. I'm not very techie so please keep keep answer easy to understand.
I think I fixed it. I went to my Google account and there was a way to restore my wifi settings.
My wife's G4 has been having the same issue... I cannot get it to reliably connect to any wifi network. Very occasionally it will connect but it only lasts for a few minutes before dropping again. Most of the time it just doesn't see any wifi networks available. I've tried resetting to factory, I've reset default networks under wifi settings, I even applied the new system update that came out yesterday, and still no luck. This is very aggravating. Anyone have any ideas?
when iam in what's up call or viber my galaxy s8 plus drop wifi and try to reconnect again. Mostly when I try to open YouTube app or any other app need data i factory reseted netwoek reseted and cleared cashe paetition but didn't work .does anyone else have this issue or solution for this?
Azizamiri796 said:
when iam in what's up call or viber my galaxy s8 plus drop wifi and try to reconnect again. Mostly when I try to open YouTube app or any other app need data i factory reseted netwoek reseted and cleared cashe paetition but didn't work .does anyone else have this issue or solution for this?
Click to expand...
Click to collapse
try with your router, reset cycle
Hello, i've got a non Samsung phone. Recently there has been a bug with recently released gw4 plugin app. Bug is that wear app force prompt user to update the app although its already up to date so wear app doesnt open and watch cant connect to phone.
Reinstalled the wear app and plugin apps on watch. During pairing setup stage "Getting your watch ready" it always stuck at 80-90% and doesnt complete setup so watch cant connect to phone. Cleared cache on watch via recovery menu but didnt help. Tried connecting another phone but watch doesnt allow it without factory resetting. I dont want to reset watch as i have some health and watch settings data on it that hasnt been backed up yet. There is an adb trick to connect wearos watches to another phone without resetting but seems like it doesnt work with wearos 3. Cant manually pull the data from watch via wifi debugging either because it's not rooted. Any solution would be much appreciated. Cheers