Hey guys, So i am having a problem with the OTG. It was working fine Lieage OS official and unofficial both as well as RR. But with Tesla and AOSP extended the OTG is detected but when i go to open it it says failed to open file. When i restart the OTG works fine but i have to restart to make it work. Any help would be appreciated. Thanks!
Hello!
I've go problem with connection to Remote Controller for phantom 4 pro. Remote Controller has USB host and I connect it tablet. There is too fast disappearing popup with question which USB app to run and i can't click OK. It not need USB debug.
The only solution is reboot tablet with connected USB and when it boot pop-up won't disappear and i can click OK and it works fine.
Popup title: "Choose an app for the USB device"
I have root. I tried MTP Enabler. Changing usb mode from mtp to ptp or rndis show popup for a 0.5 second.
How to solve this problem (dsiappearing popup)? There is any permission that i can set? How to debug it, is there any logs?
tosiaczus said:
Hello!
I've go problem with connection to Remote Controller for phantom 4 pro. Remote Controller has USB host and I connect it tablet. There is too fast disappearing popup with question which USB app to run and i can't click OK. It not need USB debug.
The only solution is reboot tablet with connected USB and when it boot pop-up won't disappear and i can click OK and it works fine.
Popup title: "Choose an app for the USB device"
I have root. I tried MTP Enabler. Changing usb mode from mtp to ptp or rndis show popup for a 0.5 second.
How to solve this problem (dsiappearing popup)? There is any permission that i can set? How to debug it, is there any logs?
Click to expand...
Click to collapse
Install the official Lineage 14.1 ROM. It works great and fixes the USB sometime issue with DJI Go 4. You won't regret it. Everything works including fingerprint reader. DJI Go works great, even when recording screen with DU Recorder. I used to see overheating messages on the Samsung firmware, but no issues with Lineage.
how to install lineage on t719? It is fo r @nswenson
There is no lineage for version with LTE. There is the same partition table? Bootloader?
Lineage is for Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) - T713
We need it for Samsung Galaxy Tab S2 8.0 LTE (2016) (gts28velte) T719
I would be interested in this as well, as I have the same issue with my DJI RC.
I also have the Galaxy Tab S2 8.0 LTE (SM-T719Y).
Please help ...
Yt2...
---------- Post added at 06:46 PM ---------- Previous post was at 06:45 PM ----------
Would it be worthwhile reloading Nougat again???
Yt2...
After homework I have found a way to connect.
Start RC.
Start Aircraft.
Plug in pad (yes you will get the flashing screen).
Turn off the RC.
Turn back on RC.
All should be good.
Thai will have to do until Samsung or Android does an update...
This is not working - there is no video, fake connection.
You have to restart tablet with connected RC.
I just flew with mine today using the above method.
It is a pain in the butt but it will have to do until Android do a fix.
I have turned on developer mode.
Chris
Same problem here, only fix I can find is to reboot the tablet once rc and rpas are on. Pain in the butt but still better than being forced to use apple!
Hi Guys,
I have successfully downgraded my SM-T719Y LTE (Version 2) Tab S2 to Android 6.01.
Back to normality again with no hassles. Yippee.
I will post links shortly...
Yt2...
Turn everything COMPLETELY off. Power up RC and then the Mavic. Let them connect. Then plug in the USB cable and fire up the S2. Should load the Go 4 app directly and you should be up and running. If not just start the app after the tablet has fully booted. You have to do this every single time though.
Hi did you tried LineageOS 15.1 with DJI GO4 ?
donrosko said:
Hi did you tried LineageOS 15.1 with DJI GO4 ?
Click to expand...
Click to collapse
Installed yesterday, it works fine, USB can be inserted and removed as long as desired. I will test further.
Hi, my brother got this phone with RR 7.1.1 installed and it seems like the rom has lots of bugs because it reboots from time to time and instead of botting to the system it bots to TWRP, I downloaded Lineage OS to install it but the phone isnt detected at all by the PC, like, it wont even tell me there is a new device connected, the usb port is working because I can charge it just fine with the charger but nothing works when connecting it to the PC, anyone has faced this problem or knows how to fix it? Also, can I just downgrade to stock marshmallow?
Thanks in advance.
zeratos said:
Hi, my brother got this phone with RR 7.1.1 installed and it seems like the rom has lots of bugs because it reboots from time to time and instead of botting to the system it bots to TWRP, I downloaded Lineage OS to install it but the phone isnt detected at all by the PC, like, it wont even tell me there is a new device connected, the usb port is working because I can charge it just fine with the charger but nothing works when connecting it to the PC, anyone has faced this problem or knows how to fix it? Also, can I just downgrade to stock marshmallow?
Thanks in advance.
Click to expand...
Click to collapse
Go to settings, developer options and enable debugging mode. When you will connect via usb it should ask for authorization. Post authorizing, pull down the menu and set usb to data transfer.
There are other options like using memory card or transfer via xender.
hi guys, i flashed nethunter 2019.3 on my h990ds android 7.0
everything is working fine except the bluetooth.
if i flash mk2000 nougat kernel bluetooth comes on but the i cant use otg wifi adapter
but i flash nethunter kerel bluetooth goes off.
any suggestion? thanks
Unlock bluetooth from the second screen and leave it. And it will boot up after few minutes. Thats how it works so far with nethunter. But i have few quistions.
1-Did monitor mode work well with you?
2-Which interface?
3-Which usb adapter did you use?
4-which firmware did you use?
Hello, I installed the lineage os 18.1 custom rom presented on the site. Recently I can only charge my smartphone when it is switched off. When it's on and I put the cable in, it connects then disappears right after.