[PROBLEM] Black screen after replacing broken screen - Xiaomi Mi A1 Questions & Answers

After replacing a broken screen I installed a new one but it just only turns the back light on and the phone turns off automatically. If I install the original one back it works perfect. Ive just ordered another one from another seller with no difference, exactly experiencing the same issue. The seller does not specify anything related to compatibility so just asking if somebody could help with it?
Thanks!

Related

Screen all white after LCD replaced?

Alright, so I have another 8125 here that had a broken screen. I replaced the LCD but now when I turn it on, it just shows up all white. I thought the phone might have been messed up but it's not, the computer recognizes it fine. Anyone have any ideas with what's going on? Thanks!
Is this in any way related to your other thread? The one where you say you ripped the ribbon cable?
http://forum.xda-developers.com/showthread.php?t=304323
No, this was a different phone, and I got it to work ! yay!
I had a simular problem and found it was a stuck button that caused the screen to go white.

Dropped my Wizard - White screen

Hi to everyone.
I dropped my wizard and lcd broke so I bought a new one and put it on. The problem is that although it takes phone calls and it syncs to pc, the screen is always white with nothing written..only a white screen. I do not know whether another problem occured besides the broken lcd. I tried to disassemble and reassemble it again but with no success. Any help please?
Hi, If my understanding is correct there are 2 versions of LCD for the Wizard. Are you sure that you have the right one? I'm sorry that I am unable to offer any further advice except to say that if the phone 'phones' and 'syncs' the basics must be working. Also the white screen means that the backlight is working - the problem is the LCD drive. Perhaps worth checking with your replacement supplier that they sent you the correct part?
Good luck!

Problamatic LCD screen on my Wing looking for help.

OK I have had my T-mobile Wing aka HTC Herald since last April.
Just a few days ago I encountered a problem with my lcd. And I would like your guys feedback if possible before I purchase an lcd replacement.
My problem is when I slide open the wing my screen starts to fade, (almost making it look like a negative from a picture) after that it starts to fade to different colors.
Now the problem persists when the phone is closed, however if I tap the top of my wing and hold it the screen becomes normal, but once I let go it starts to fade again.
I would like to know if any of you experienced this with ur phone and if a replacement lcd screen will fix the problem or am I sol?
If it helps im running my wing on Open Touch v6.0 WM 6.1 Build 20273.1.3.3
Thanks in advance.
LCD problems
Hello,
I too have some weird LCD problems and instead of creating a new thread I thought of posting in this one.
For the past few months, whenever I get a call or resume my phone from standby mode using the power button the entire screen goes white or sometimes it has green or blue colored lines all over them. I have to keep on pressing the power button few times to get proper display. Also whenever I open the qwerty keyboard the display goes blank. Since I am out of warranty Tmobile is not ready to replace the phone and I contacted the HTC customer service and they told that the display unit and some hardware stuff is gone and it needs to be replaced and will cost a minimum of 170$ and will increase if they had to replace some other hardware.
Please note that, my screen is NOT broken and the touch screen too works fine. Recently the display has gone completely blank or too faded even to see whats there in the screen I could barely see the today screen.
I searched and I did not find any similar issues that other folks have faced. Since the LCD and the touch screen is not broken replacing them is not going to fix the issue, correct? I was using open touch and recently I updated the latest official Tmobile release of ROM 6.26.xxx. I also tried the hard resets too.
Any other ideas/suggestions will be of great help for me. Thanks in advance.
I am having some similar problems as well, but my problem is much more severe. My screen is completely black and it just happened this past weekend. When i slide the phone the screen used to flicker but now it black as well. Phone works fine but is useless due to the fact the the screen is out. I remember seeing a program where you can interact with your phone via your pc when something was wrong w/ your screen (cracked, broken, etc.) I have searched the forum but to no avail. The program was very simple and effective. I plan on replacing my phone but would like to retrieve some info off the one I have. I just need that program! Anyone please HELP US!
handsome22 said:
I am having some similar problems as well, but my problem is much more severe. My screen is completely black and it just happened this past weekend. When i slide the phone the screen used to flicker but now it black as well. Phone works fine but is useless due to the fact the the screen is out. I remember seeing a program where you can interact with your phone via your pc when something was wrong w/ your screen (cracked, broken, etc.) I have searched the forum but to no avail. The program was very simple and effective. I plan on replacing my phone but would like to retrieve some info off the one I have. I just need that program! Anyone please HELP US!
Click to expand...
Click to collapse
link to the thread containing some info about the software... its called my mobiler
thanks for the info

Strange problem with the screen.

Hi to all,
I have strange problem with my Elf. My screen stopped responding and I thought that the problem is the digitizer. Hard reset didn't help. I ordered a new one and changed it. Unfortunately the situation remained the same. So I got the same working phone from a friend and decided to change some parts to find out where the problem is. The result is..
My front panel(with the new and after that with the old digitizer) connected to the working phone - not responding screen.
My phone connected to the working front panel - not responding screen.
I have no idea what to do. If anyone can help. Exclude the warranty.
There is a small battery on the motherboard. Does anyone know its functions?
I have a suggestion that it is something like cmos battery of the PC.
My idea is to remove it for a while and make new hardware initialization.
I am not sure about that.
I doubt that there is something with the touch screen controller(TSC2046). Is there any way to reset it?

[Q] black screen after screen replacement for samsung focus

i just replaced the screen on my focus n i used it all day n made some calls then all of a sudden the screen went black on a call n it hasnt come back on since. i have tried taking out the battery, plugging it into the computer, i even updated it. and still yet a have a black screen. the touch funtions still work i can use the phone unlock it select things i just have no display. please help
Screen issue? You might need to take it apart again and check the connectors...
i tried that today n still no luck
As I said, screen problem? Although new, it might be gone. Which might also indicate another issue related to the screen (some circuit overloading?)

Categories

Resources