Hi everybody!
After several not lucky rooting attemps, Nook Glowlight 3 starts to freeze/lag heavily whenever Wi-Fi is switched on. Using default ROM, it just lags from the very begining - i.e. "get started" screen and than freezes at "turning on Wi-Fi screen". With custom TWRP-installed ROM, system works fine and smooth up until I switch-on Wi-Fi in settings. And then it freezes, with only harware reboot working, but freezes again now just during reboot. TWRP factory reset helps up until i switch-on Wi-Fi in settings again...
Is there a way to double-check in adb/fastboot that Wi-Fi module is indeed the reason for the problems and how can I restore it to normal state? ie radio image or smth else
Thank you for any help and ideas.
See logcat attached. Btw, logcat command also freezes after i switch-on Wi-Fi in settings
Related
Hi all,
A few days ago I started to have a problem with data synchronization in settings, mainly whenever I try to open it the phone restarts, leaving me without possibility to switch on/off data sync. I've tried with widgets but to no avail.
What I did after the first time it occured, was just a factory reset from recovery. It worked but after a few hours the situation repeated. I really don't want to reset it again... I've tried to fix permissions from recovery but it didn't help.
Any thoughts ?
I have a 2.1 stock ROM with enabled fastboot and clockwork mode recovery. The phone is rooted now, but it happened both when it was rooted and when it was not.
Hi There,
Shortly after updating my Nexus 4 to 4.2.2 OTA today the screen went blank and I've been unable to get it to function correctly again.
The phone is still showing some signs of life, I am getting notification LEDs and I am unable to unlock the phone with facial recognition even though the screen remains blank - I can tell from the vibration and the LED stopping that it has unlocked. Pressing the power button to lock it starts the notification LED again.
I have tried a hard boot (Volume Down + Power) and the screen did come on to display the google logo followed by the X but as soon as they had been shown it returned to a blank screen.
Does anybody have any ideas of what this could be or how to solve it or should I contact Google in regards to this issue?
Thanks in advance for any help
seems like the OTA update has corrupted somewhere. You should reboot into bootloader and use fastboot to flash the stock 4.2.2
Is there anything else worth trying before doing that? I wouldn't have a clue where to start as this is my first android device
Ok so I got it working but did lose all my data. If anyone else comes across this issue I had to boot into recovery mode and do a full wipe/factory reset. The first time i did this the phone started up with no problems but during configuration when I entered my Google account the blank screen strangely returned so I again did a full wipe in recovery mode, skipped the 'set-up google account' step and then entered it manually later in settings once the device had started up.
No idea what caused this and if its a bug in 4.2.2 or an issue with some settings in my google account that are being backed up and restored to the phone but either way I had no problems until 4.2.2 update installed and the issue occuring even after first data wipe rules out any third party apps being the cause.
I had a similar problem after updaing that the screen stay blank and it wo'nt unlock
As soon as i disable the bluetooth the problem solved.
It's happened when i paired it with my pc
Hello,
i just got my Fire HD 10 yesterday. Updated it (via ota) to 5.6.0.1 and rooted it using this guide:
https://forum.xda-developers.com/hd8-hd10/general/tut-fire-hd-10-7th-gen-2017-root-box-t3726443
Everything worked fine.
After that i installed Google Playstore and Launcher Highjacker as shown in this guide:
https://forum.xda-developers.com/hd8-hd10/general/tool-disables-ota-lockscreen-install-t3715320
I disabled some Apps using Titanium Backup(like the Prime Video app or the lockscreen package) and that was it.
After a while a began to encounter the following problems:
1: My device was pretty hot in the upper left corner(i fixed it my disabeling the com.amazon.client.metrics - it wakelocked it for 80+% of the time).
2: It (seemingly) randomly turned off.
3: When i turned the screen off for longer than ~5 seconds, i couldnt turn it on anymore (most of the time) and had to force poweroff and start again.
4: When i tried to shutdown my device, the shutting down loop was there endlessly and i also had to force poweroff.
I decided to reinstall the device.
What i did was:
1: Go into recovery.
2: Factory reset and delete cache
3: ADB sideload the os(link in first thread, second post(5.6.0.1))
4: Reboot
Now the default amazon setup your device screen apeared. But here comes my current problem:
When i pick my Wifi Network and enter the password it loads for a few seconds and the firelogo appears, starting an endless loop.
Do you guys have any idea what happens here? What can i do? Hope you guys got an idea.
Greetings
edit:: After beeing in that loop for a while(like 10 mins) it startet optimizing my system-storage and apps in a loop.
edit:: after a few iterations(ca. 3) of the optimizing my system etc. loop and removing my sd card(dont know if that helps) it worked
Thread can be closed
Hi guys,
I am having an issue with my p10 lite
There are some times where wifi despite being on it stops working, and only rebooting fixes the problem.
It happens with more than one wifi network.
wifi stops working and my p10 is unable to search for any network. Before last o/s update only restart would fix the problem, now i have to turn wifi off and on again, but still...
It seems when wifi on and when I do not touch long time phone
I think if I do not touch 1-2 hour, wifi goes off and can't open it, when ı try to open it, it goes settings does not respond anything.
If anyone has a clue to fix this please advise...
Thank you!
Hi i had a similar issue
My phone is :was-lx1 c432b198 now b206
In my case wifi showed on but no networks shown in menu
And no react to turn off button
The device cant restart with standard method
Restart only with long press power button 10sec.
I could not understand what was causing it
After a week a resset the device twise to solve the problem
First resset did't work Because i recover a backup from hisuite and the problem was recovered
But second resset was fresh install from recovery menu wipe data and cache
only contacts was recovered from google account
And now works good no bugs
Sorry for my bad english
Hi,
I just solved the same issue today.
Two solutions
1. Leave wifi always on : setup, wifi, configure, wifi Always on. Drains battery a lot.
2. Reinstall update with full update package. I had the problem after installing the b182 package and solved this way...
Hi guys,
Trying to fix a friends x704f wifi only, but no luck.
It had Lineage 18.1 on it, and for whatever reason he did not like that, and went on to reflash stock with Lenovo's Rescue and Smart assistant which showed it a success rescue, but now Tablet boots to EULA, arrives to choose wifi and it crashes and reboots constantly, with no wifi icon being shown.
Lenovo rescue installed TB_X704_S000060_220916_ROW, so I factory reset it a few times from recovery, went through rescue again, installs same ROM, success, yet again it crashes at network selection, of if you do not touch anything, it crashes itself after about 20 seconds after being booted and if i hold the Power button and select shutdown, briefly the standard desktop shows with icons and than it crashes, so guessing ROM is there, it just can't boot.
Tried with QPST and latest ROM, but on eMMC xml selection I get error Document error on element program and name/value true.
Guessing baseband or some other thing should of been backed up before flashing stock again? if it helps, OEM lock is OFF, secure boot is ON what I can see from fastboot.
Thanks.
There must be something wrong with the persist partition, flash the persist.img again.