HI All,
I tried to flashed my Sm-T580 WIFI with stock using ODIN 3.14 (BL, CSC and AP) but now it came up with "No command" and not booting into the OS
I screwed up and managed to get the Factory Binary installed but when flashing the stock rom it did not want to get into the OS (no command) and then it reboot and into the loop after 2 mins
The stock firmware I got from SamMobile : T580XXU4CRK5_T580XSA4CRK5_XSA
I can not get into the HOME+Vol UP + Power
I can only get into the download mode
Can I please get some suggestion on how to fix this.
Thank you
Related
I have a Galaxy S4 SPH-L720T was trying to install an update to a rom i was testing out and my battery was at 25% and i was about to plug it in and the screen was black but it turned back on and the firmware was all messed up and it said my baseband version was unkown and i tried to go into recovery (TWRP) and it wouldn't load up so i booted into download mode and then i tried flashing a stock firmware and it failed so i cant boot into recovery/system but i can get into download mode but i have been trying to flash the stock firmware but it says i have no PIT partition. Please help me asap my phone is the Sprint SPH-L720T 16GB. Thanks
1st time flashing my S4. i have experience flashing custom roms and anything on my S3 before and never encountered problems. phone specs are:
Model: I9505
Android Version: 4.4.2
Baseband Version: I9505XXUGNG8
Write Protection Enabled
Burst Mode Enabled
i have turned on debugging. no kies on background and installed USB drivers.
I used odin 3.07
tried to flash latest version of CWM recovery
flash was successful but when i try to go on recovery the screen says "No Command" and i only get the official recovery. i have tried other versions but the same results I get. Help please. This is the first time for the phone to be flashed.
The FAQ is for you too.
for anyone with the same problem i have a fix for it i have solved my problem. you have to uncheck the AUTO REBOOT from Odin then flash the recovery .tar file you will see that the flashing is complete remove the battery and the USB cable. wait 10 sec. put it back together then go to recovery mode immediately otherwise it wont work.
Hi guys
Ive flashed this device and everythings fine in odin, just that when it restarts in the boot menu on the Samsung logo, and i cant Wipe/Factoryreset since it comes up with the mdm error.
ANY ideas?
what did you flash to your device >.>
I flaashed A stock firmware from Odin, i Odin itself it goes as it should
Device Model: SM-J500H
Year: 2015
I'm having a problem downgrading from Stock Samsung Marshmallow Rom
After unlocking OEM "disabling frp mode" from developer options and enabling USB debugging here's what i tried:
.I tried downgrading directly by flashing lollipop stokc rom via odin but having an error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
.I tried to use Zoink's BT and Modem files to downgrade easily but same error (https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801)
.I tried to flash two custom roms via TWRP (Resurrection Remix 7.1 and MIUI Rom Port 5.1) RROS didn't even flash it showed me that the rom is not for my device model) (MIUI was flashed successfully but when i tried to boot the phone was stuck on the first boot logo (SAMSUNG GALAXY J5 LOGO NOT THE SECOND ONE WHICH HAS ANIMATIONS) i waited for a while but then i noticed that the screen is getting glitchy and the phone screen is getting green more and more.
.I tried to use the combination rom method but same error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
I CAN'T EVEN FLASH A 5.1 STOCK ROM BECAUSE OF THE ABOOT THING
.Hope this information will be enough to get me a working solution
Thanks in advance.
me too can`t downgrade
i Hope Find working solution
Astranx said:
Device Model: SM-J500H
Year: 2015
I'm having a problem downgrading from Stock Samsung Marshmallow Rom
After unlocking OEM "disabling frp mode" from developer options and enabling USB debugging here's what i tried:
.I tried downgrading directly by flashing lollipop stokc rom via odin but having an error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
.I tried to use Zoink's BT and Modem files to downgrade easily but same error (https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801)
.I tried to flash two custom roms via TWRP (Resurrection Remix 7.1 and MIUI Rom Port 5.1) RROS didn't even flash it showed me that the rom is not for my device model) (MIUI was flashed successfully but when i tried to boot the phone was stuck on the first boot logo (SAMSUNG GALAXY J5 LOGO NOT THE SECOND ONE WHICH HAS ANIMATIONS) i waited for a while but then i noticed that the screen is getting glitchy and the phone screen is getting green more and more.
.I tried to use the combination rom method but same error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
I CAN'T EVEN FLASH A 5.1 STOCK ROM BECAUSE OF THE ABOOT THING
.Hope this information will be enough to get me a working solution
Thanks in advance.
Click to expand...
Click to collapse
First unlock the oem unlocking and download the stock rom and make sure it is for yoir model number.And flash it through odin. You have a problem of mismatch os.
It's because Samsung locked the bootloader for SM-J500H, so if you're on lollipop and upgraded to marshmallow, you cannot downgrade again.
Same probleme any sulitions please
Astranx said:
Device Model: SM-J500H
Year: 2015
I'm having a problem downgrading from Stock Samsung Marshmallow Rom
After unlocking OEM "disabling frp mode" from developer options and enabling USB debugging here's what i tried:
.I tried downgrading directly by flashing lollipop stokc rom via odin but having an error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
.I tried to use Zoink's BT and Modem files to downgrade easily but same error (https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801)
.I tried to flash two custom roms via TWRP (Resurrection Remix 7.1 and MIUI Rom Port 5.1) RROS didn't even flash it showed me that the rom is not for my device model) (MIUI was flashed successfully but when i tried to boot the phone was stuck on the first boot logo (SAMSUNG GALAXY J5 LOGO NOT THE SECOND ONE WHICH HAS ANIMATIONS) i waited for a while but then i noticed that the screen is getting glitchy and the phone screen is getting green more and more.
.I tried to use the combination rom method but same error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
I CAN'T EVEN FLASH A 5.1 STOCK ROM BECAUSE OF THE ABOOT THING
.Hope this information will be enough to get me a working solution
Thanks in advance.
Click to expand...
Click to collapse
1.Flash this firmware by Odin
https://drive.google.com/file/d/0B-pt1IG7T4hmVzhuMnRyeTBjTGM/view?usp=drivesdk
(Before flashing, wipe all storages(all except internal, external in advanced wipe).
If your recovery is not twrp , you must do both wipes in stock recovery.
2. After this flash csc and cp (modem,phone) from multi-regional 4-file firmware, or firmware for your country.(5.1.1)
Thas all.
wrongwriter3 said:
1.Flash this firmware by Odin
https://drive.google.com/file/d/0B-pt1IG7T4hmVzhuMnRyeTBjTGM/view?usp=drivesdk
(Before flashing, wipe all storages(all except internal, external in advanced wipe).
If your recovery is not twrp , you must do both wipes in stock recovery.
2. After this flash csc and cp (modem,phone) from multi-regional 4-file firmware, or firmware for your country.(5.1.1)
Thas all.
Click to expand...
Click to collapse
After this step can i install miui multipro in j500h ????????
Hi
Maybe you are not flashing the right version.Different model Number,region,build etc...
OK. First some info about the phone:
GT-I9506
S/N: RF8F20W841T
PDA: PL2 / PHONE: OJ2 / CSC: OK1 (NEE)
I replaced the screen few days ago and got the phone working at last! It was with STOCK 4.4.2. So i used OTA to update it to latest STOCK 5.0.1. After this I have rooted it with CF-AUTO-ROOT and it was fine for two days.
After two days wile charging with S CHARGER COVER (OEM) it just restarted. Was working ok but after few minutes hanged and rebooted again. Then the bootloop appeared. First screen with GT-I9506 logo and then blue flash and again.
CAN'T BOOT IN TO THE SYSTEM (no matter what I can't make it to boot properly)
CAN'T ENTER RECOVERY (it's showing that's booting in to the recovery but instead of recovery it just restart)
CAN ENTER DOWNLOAD MODE (no problem with entering DM)
What I have done so far:
- Kies recovery with phone model number and serial number (still bootloop).
- Odin flashing STOCK rom from SamFirm download (still bootloop) (single and 4 files flash).
- Re-partitioning (flashing PIT file).
- Reflashing bootloder (still nothing).
- Tryed CWM, TWRP and other Recovery, non of them boot up.
Using those files to flash:
AP_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_low_ship.tar
BL_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_low_ship.tar
CP_I9506XXUDOJ2_REV00_CL1318424.tar
CSC_NEE_I9506NEEDOK1_CL6069869_QB7017077_REV03_user_low_ship.tar
I would really appreciate help from someone more skilled then me.
Is it possible that I should flash 4.4.2 STOCK ROM instead of 5.0.1 to revive it? I came with 4.4.2 so maybe to make him work again I should start from flashing STOCK 4.4.2 NEE?
UPDATE:
STOCK FIRMWARE 4.3 and 4.4.2 does not help... I'm out of ideas...
After flashing bootloader it self I manage to get to the point when Green Droid appear and after 30% of progress it restarts and bootloop is back again...
Uninstall any old drivers and install new drivers.
Download the official file latest for your device from here
And try to reflash again, it should work or ultimately you will have to buy a new motherboard for your device....
You are likely to have encountered a hardware fault, assuming everything you tried were done correctly. The only fix is to buy a new phone, because of Samsung's stupid Knox policy D: