Device Model: SM-J500H
Year: 2015
I'm having a problem downgrading from Stock Samsung Marshmallow Rom
After unlocking OEM "disabling frp mode" from developer options and enabling USB debugging here's what i tried:
.I tried downgrading directly by flashing lollipop stokc rom via odin but having an error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
.I tried to use Zoink's BT and Modem files to downgrade easily but same error (https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801)
.I tried to flash two custom roms via TWRP (Resurrection Remix 7.1 and MIUI Rom Port 5.1) RROS didn't even flash it showed me that the rom is not for my device model) (MIUI was flashed successfully but when i tried to boot the phone was stuck on the first boot logo (SAMSUNG GALAXY J5 LOGO NOT THE SECOND ONE WHICH HAS ANIMATIONS) i waited for a while but then i noticed that the screen is getting glitchy and the phone screen is getting green more and more.
.I tried to use the combination rom method but same error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
I CAN'T EVEN FLASH A 5.1 STOCK ROM BECAUSE OF THE ABOOT THING
.Hope this information will be enough to get me a working solution
Thanks in advance.
me too can`t downgrade
i Hope Find working solution
Astranx said:
Device Model: SM-J500H
Year: 2015
I'm having a problem downgrading from Stock Samsung Marshmallow Rom
After unlocking OEM "disabling frp mode" from developer options and enabling USB debugging here's what i tried:
.I tried downgrading directly by flashing lollipop stokc rom via odin but having an error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
.I tried to use Zoink's BT and Modem files to downgrade easily but same error (https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801)
.I tried to flash two custom roms via TWRP (Resurrection Remix 7.1 and MIUI Rom Port 5.1) RROS didn't even flash it showed me that the rom is not for my device model) (MIUI was flashed successfully but when i tried to boot the phone was stuck on the first boot logo (SAMSUNG GALAXY J5 LOGO NOT THE SECOND ONE WHICH HAS ANIMATIONS) i waited for a while but then i noticed that the screen is getting glitchy and the phone screen is getting green more and more.
.I tried to use the combination rom method but same error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
I CAN'T EVEN FLASH A 5.1 STOCK ROM BECAUSE OF THE ABOOT THING
.Hope this information will be enough to get me a working solution
Thanks in advance.
Click to expand...
Click to collapse
First unlock the oem unlocking and download the stock rom and make sure it is for yoir model number.And flash it through odin. You have a problem of mismatch os.
It's because Samsung locked the bootloader for SM-J500H, so if you're on lollipop and upgraded to marshmallow, you cannot downgrade again.
Same probleme any sulitions please
Astranx said:
Device Model: SM-J500H
Year: 2015
I'm having a problem downgrading from Stock Samsung Marshmallow Rom
After unlocking OEM "disabling frp mode" from developer options and enabling USB debugging here's what i tried:
.I tried downgrading directly by flashing lollipop stokc rom via odin but having an error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
.I tried to use Zoink's BT and Modem files to downgrade easily but same error (https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801)
.I tried to flash two custom roms via TWRP (Resurrection Remix 7.1 and MIUI Rom Port 5.1) RROS didn't even flash it showed me that the rom is not for my device model) (MIUI was flashed successfully but when i tried to boot the phone was stuck on the first boot logo (SAMSUNG GALAXY J5 LOGO NOT THE SECOND ONE WHICH HAS ANIMATIONS) i waited for a while but then i noticed that the screen is getting glitchy and the phone screen is getting green more and more.
.I tried to use the combination rom method but same error "aboot.mbn fused 2 > binary 1" "AUTH FAILED"
I CAN'T EVEN FLASH A 5.1 STOCK ROM BECAUSE OF THE ABOOT THING
.Hope this information will be enough to get me a working solution
Thanks in advance.
Click to expand...
Click to collapse
1.Flash this firmware by Odin
https://drive.google.com/file/d/0B-pt1IG7T4hmVzhuMnRyeTBjTGM/view?usp=drivesdk
(Before flashing, wipe all storages(all except internal, external in advanced wipe).
If your recovery is not twrp , you must do both wipes in stock recovery.
2. After this flash csc and cp (modem,phone) from multi-regional 4-file firmware, or firmware for your country.(5.1.1)
Thas all.
wrongwriter3 said:
1.Flash this firmware by Odin
https://drive.google.com/file/d/0B-pt1IG7T4hmVzhuMnRyeTBjTGM/view?usp=drivesdk
(Before flashing, wipe all storages(all except internal, external in advanced wipe).
If your recovery is not twrp , you must do both wipes in stock recovery.
2. After this flash csc and cp (modem,phone) from multi-regional 4-file firmware, or firmware for your country.(5.1.1)
Thas all.
Click to expand...
Click to collapse
After this step can i install miui multipro in j500h ????????
Hi
Maybe you are not flashing the right version.Different model Number,region,build etc...
Related
1st time flashing my S4. i have experience flashing custom roms and anything on my S3 before and never encountered problems. phone specs are:
Model: I9505
Android Version: 4.4.2
Baseband Version: I9505XXUGNG8
Write Protection Enabled
Burst Mode Enabled
i have turned on debugging. no kies on background and installed USB drivers.
I used odin 3.07
tried to flash latest version of CWM recovery
flash was successful but when i try to go on recovery the screen says "No Command" and i only get the official recovery. i have tried other versions but the same results I get. Help please. This is the first time for the phone to be flashed.
The FAQ is for you too.
for anyone with the same problem i have a fix for it i have solved my problem. you have to uncheck the AUTO REBOOT from Odin then flash the recovery .tar file you will see that the flashing is complete remove the battery and the USB cable. wait 10 sec. put it back together then go to recovery mode immediately otherwise it wont work.
Good day,
I have a problem on galaxy s6 edge plus,
Is a G928F with frp lock and drk broken with binary 3
I tried to flash the combination file COMBINATION_FA51_G928FXXU3API1_CL5994902_QB10802728_REV00_user_mid_noship.tar
But at boot there is ddr 4G error in red.
With smart swith everything is restored but when I start it is a drk flash boot error install eng boot first.
There is no solution to starting it. There is a solution to this?
Thank you
Try installing twrb recovery and then install no dm verity
ADhaM2016 said:
Try installing twrb recovery and then install no dm verity
Click to expand...
Click to collapse
I cannot because i have frp on
boot your phone to download mode , and install stock frimware via odin. before rooting / flashing custom rom after that, turn on devolper options , and from devolper options , tick on oem unlock. happy flashing
Hi, My galaxy grand prime got a boot loop, stuck in samsung logo, i tried to flash a lot of roms, but all the roms got errors in the odin, failed auth, and other, so i tried to flash a custom recovery twrp but no sucess, the phone boot into recovery mode but he got a black screen, i tried a lot of custom recovery versions but all the versions got a black screen, only boot into original recovery and download mode, i need help :crying:.
The android version is 4.4.4, i tried to flash xxu and xcu, is a brazilian phone, with claro provider rom, help-me pls.
I tried another rom, flashing looks like ok, but i got this error https://ibb.co/f7ivLx
Please help me
Someone help me plssssss
Hello there
Downoald the official frimware from sammobile and flash it via odin then wipe system and factroy reset from the official recovery after flashing the official frimware and it will work
Dont work
hello every one i updated my note 4 to android 7 Refined Nougat N7FE Port 5.6 since 2 week and today my phone not booting or even enter recovery mode and if i put it to charger its freeze on battery icon . i flashed lollipop by odin and pass but same result
can some body suggest solution please and thx
any help please .. i flashed stock rooms 511 and 601 by odin but same result at startup should i flash bootloader or what??
Backstory:
Received the message "Custom binary blocked by FRP lock" when restarting my phone. I had a custom ROM installed so this was probably why, but I had flashed no-verity-opt-encrypt previously so I don't know why I randomly got this message.
Tried to flash the latest Android 8.0.0 stock firmware from sammobile, successfully flashed through Odin but when the phone boots it keeps looping into recovery, followed by "No command".
When I try to access the recovery settings by pressing power+up it comes with:
fail to open recovery_cause(No such file or directory)#
Reboot Recovery Cause is [UNKNOWN]# No Support SINGLE-SKU
Along with a bunch of lines saying failed to mount /system and dm-verity failed.
I've tried flashing many different stock ROMs but only the factory binary combination ROM is able to boot up. Therefore, I cannot turn off FRP lock. I am struggling to find out why, even though Odin successfully flashed the whole stock BL, AP, CP and CSC, the recovery cannot be opened.
Any ideas would be greatly appreciated.
Edit: Managed to fix it through a YouTube video by Mr.Lee
Try downgrading to nougat or marshmallow. That should remove FRP.
Sent from my SM-G935FD using Tapatalk
I've tried but I cannot find any marshmallow/nougat version which does not result in a SW REV CHECK FAIL error, my kernel only accepts Oreo or higher it seems.