Hello everyone! I would like to ask for some help because I just unintalled TWRP and installed Philz using the Flashify. Upon rebooting, it showed a red text in the upper left of the screen labeled as "seandroid not enforcing" and upon putting the USB cable to the device, a message pops up showing USB device not recognized and device descriptor request fail shows. Does anyone had similar problems and found a way to fix it? Thank you
Related
Hi. I have a SM-G900T and tried to root it today using Chainfire. I got a message that it passed, but it entered into a loop where is starts to reboot, displays a message "Set Warranty Bit : kernel" at the top, and restarts after a few seconds. Looking around I saw a lot of advice to essentially try again if you get the "Set Warranty Bit : kernel" error, however when I get into the download mode now windows (and Odin) no longer see the device. I tried getting the latest drivers from Samsung to see if it helped, but it did not.
When it's stuck in the reboot loop I can hear the windows sound for USB connecting, but it restarts before I can verify anything in device manager.
Can anyone help me out? Thanks!
Ok. I'm a fool. As soon as I hit the up volume from the warning the USB connected.
I tried to install the Chainfire root again, but I got the same error. I'm now downloading the stock firmware from Sammobile to try and get my phone functional again.
Hi all !
I have a Samsung A8 (model SM-A800F) which was working great. I ran Kingo Root to try to install Youtube ad free. The next time I restarted it, it didn't load, and restarted in an endless loop to where "Samsung" logo appears (then restarted again). I booted into System Recovery and chose to reset to factory, but it didn't help. Then I tried flash it using Odin in Download mode. I installed the Windows drivers, downloaded the 6.0.1 firmware for Vietnam (where it was purchased), loaded the file into the AP field, and once verified clicked Start. The progress was frozen when reaching mid-way every time I tried, until it said "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software"...
I downloaded Smart Switch and installed in Windows, but the drivers were not able to install correctly, and failed on the component referring to the ID or something... while Modem driver was installed correctly and the phone appeared in Device Manager. Smart Switch didn't recognize my phone and said "unsupported device".
Now I cannot get the phone stay constantly ON, and the screen shuts down and loads in an endless loop, to the "Error occured" screen... When trying to boot to the ODIN Download page, it loads, I press UP for Continue, and then it again shuts down and loads to "Error Occured".
I tried to charge over night but it didn't help. It does the same thing when the phone is connected to the charger...
However it seems that by IMEI it is sill under warranty. I'm not sure if I voided it :/
Here's what the Download mode page says:
ODIN MODE
PRODUCT NAME: SM-A800F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FAP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 0
AP_SWREV: 1
Would appreciate any help, this phone is almost new but now it's dead :/
have u try use kise to repair ur phone
Hi,
I solved it, see this thread:
https://forum.xda-developers.com/ga...lease-help-t3622059/post72699428#post72699428
Thread closed, this is a duplicate of this one: https://forum.xda-developers.com/samsung-a-series/help/killed-phone-warranty-please-help-t3622059
Wood Man
Forum Moderator
Need help with samsung galaxy S6 edge plus "Custom Binary Blocked by FRP Lock"
Hello Everyone
I am in a serious trouble with my Samsung galaxy s6 edge plus
I bought one in the market used one. i bring it home and it was ok .
The next day from settings i give a reset but now the phone start and giving me message """ Custom Binary Blocked by FRP Lock""" at the start and phone goes shutdown.
I put the phone in Recovery mode and connect the USB cable but neither windows ( 7 and 10) recognise the device error " Device Descriptor Request Failed"
I watched some youtube videos suggesting different techniques but still device is not recognized by Windows.
What should i do i need help Please.
I know you may have already tried, but what happens if you follow the guide for flashing a stock Rom in Odin (so follow the pre-requisits for USB drivers and what not) then put it into download mode (Power Home Vol down then vol up)
I had an FRP issue which soft bricked my s6 edge+, Samsung Switch, Lies and even ADB tools wouldn't detect the device but Odin detected the phone on Com Port 3. If after the device driver installation fails, maybe go into Device Manager, right click on the phone and update drivers manually.. extract the Samsung drivers and point to that directory.
Hey everyone,
I drove into a big issue with my sister’s phone. The phone is a Samsung Galaxy S5 NEO (SM-G903F). Some days ago, I did root the phone of my sister. Everything was allright and worked afterwards. I just had to unlock the OEM lock in the developer options. Additionally, I flashed a custom recovery from “TWRP”. To that point everything did just worked fine as it should be. Now we come to the issue. My sister accidently hit the OEM lock button. Now she can’t boot the phone anymore as the phone shows the message: "Custom binary blocked by FRP lock". Also, if I try to go into the recovery system the message pops of with: "Custom binary blocked by FRP lock" and "Recovery is not seandroid enforcing"! If I turn on the power button or either go into the recovery, I can see the start samsung boot display for 3 seconds after that the phone shuts down automatically. On top on all of that, the phone generally has an overheating issue as it gets really easy very hot and closes application automatically. Now the only options I thought I have is to go into the download mode and connect the phone via USB to “Odin” to flash a new firmware. Easy as it is I started “Odin” on the pc went into the download mode, plugged the USB cable into the pc and waited for the "added" message. Unfortunately, nothing popped up. Therefore, I tried all different cables (Original Samsung, Multi-USB and cables from other phones) on the pc but still no "added" message. After that I tried 3 different PC's even a MAC, I tried all cables on all PC's but it didn't worked. Also I tried it on diffrent USB-Ports. I checked the Device-Manager and also there couldn't find the phone anywhere. I installed “Kies”, tried to somehow connect the phone and installed new drivers. Really nothing worked... I am just not sure if the USB-Debugging button was checked or activated in the developer options or not. Anyway, I guess it shouldn't matter as it should connect in download mode the phone via usb. I really do hope someone is out there who can help me or might has a good tip/advice for me except something like: "You tried already everything", "There is nothing you can do" or " You can throw your phone away".
Thanks in advance.
Kind regards,
Cossack007
Cossack007 said:
Hey everyone,
I drove into a big issue with my sister’s phone. The phone is a Samsung Galaxy S5 NEO (SM-G903F). Some days ago, I did root the phone of my sister. Everything was allright and worked afterwards. I just had to unlock the OEM lock in the developer options. Additionally, I flashed a custom recovery from “TWRP”. To that point everything did just worked fine as it should be. Now we come to the issue. My sister accidently hit the OEM lock button. Now she can’t boot the phone anymore as the phone shows the message: "Custom binary blocked by FRP lock". Also, if I try to go into the recovery system the message pops of with: "Custom binary blocked by FRP lock" and "Recovery is not seandroid enforcing"! If I turn on the power button or either go into the recovery, I can see the start samsung boot display for 3 seconds after that the phone shuts down automatically. On top on all of that, the phone generally has an overheating issue as it gets really easy very hot and closes application automatically. Now the only options I thought I have is to go into the download mode and connect the phone via USB to “Odin” to flash a new firmware. Easy as it is I started “Odin” on the pc went into the download mode, plugged the USB cable into the pc and waited for the "added" message. Unfortunately, nothing popped up. Therefore, I tried all different cables (Original Samsung, Multi-USB and cables from other phones) on the pc but still no "added" message. After that I tried 3 different PC's even a MAC, I tried all cables on all PC's but it didn't worked. Also I tried it on diffrent USB-Ports. I checked the Device-Manager and also there couldn't find the phone anywhere. I installed “Kies”, tried to somehow connect the phone and installed new drivers. Really nothing worked... I am just not sure if the USB-Debugging button was checked or activated in the developer options or not. Anyway, I guess it shouldn't matter as it should connect in download mode the phone via usb. I really do hope someone is out there who can help me or might has a good tip/advice for me except something like: "You tried already everything", "There is nothing you can do" or " You can throw your phone away".
Thanks in advance.
Kind regards,
Cossack007
Click to expand...
Click to collapse
hey!
don't panic try thisfirst update the samsung usb drivers. then try to restore the phone with the original samsung smart switch software (grab it here)
Hi,
I would like to use my old phone but when I turned it on I get an error "secure booting error! cause: boot certification verify"
I tried to enter download mode by holding the vol+ key and than plug in the usb cable to my phone and pc and it says "entering download mode" (or something similar) and again "secure booting error!"
I also installed lg mobile support tool and nothing happens different..
I also tried to format my phone but i get the same error
what can I do ?
thanks,
Rachel
no one knows what to do?