Hello,
since today, my Mi A1 is totally messed up: it virbates, then the Mi Logo and a four coloured bar appears, and after 5 seconds, the screen goes off, it vibrates again, and the same happens again. I cannot switch it completely off, and I cannot see any menu.
I tried holding Power and Volume Up, but nothing happens (according to many sites, this should give a hard reset opportunity, but nothing happens on this device)
Holding Power and Volume Down, a Fastboot Logo appears, but it reboots again, so no way to enter fast boot.
SIM and SD card are removed.
What else can I try?
Maybe vol buttons damaged?
Wysłane z mojego Mi A1 przy użyciu Tapatalka
it just reboots again on its own after you get to fastboot? is your phone connected into your pc when it resets itself after you enter fastboot?
if so disconnect from the pc, enter fastboot and it should not reset by itself this time.
what now? this happened to me too, what I did to fix this problem was flash the stock rom, and then flash the custom rom again, and it worked.
you can flash the stock rom using miflash and the stock rom folder (make sure to get the fastboot version of the rom so u can use it on fastboot)
---------- Post added at 06:58 PM ---------- Previous post was at 06:57 PM ----------
tofikos said:
Maybe vol buttons damaged?
Wysłane z mojego Mi A1 przy użyciu Tapatalka
Click to expand...
Click to collapse
seems he edited the post, maybe you've got a way to fix it that isnt my way? incase mine fails
Related
Hi guys, I'm using CM10 in my L5 E612, but I've getting some issues and I've decided back to stock ROM, I already downloaded the KDZ and I have the tool called KDZ Updater, but in the tutorials that I've founded they said that I need to enter in "Emergency Mode", but my phone don't enter in emergency mode, when I press the keys the phone just blink the lights once, there is another way that I can back to stock ROM ?
Are you pressing just Volume - button? Or both (+ and -)? First you need to flash a kdz to downgrade to V10,then you can flash a V20 version
Enviado desde mi LG-E610 usando Tapatalk 4
Stop pressing the power button when lights turn on.
And downgrade to v10 is not required. You can flash v20 over v20.
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
chrisdlc119 said:
First you need to flash a kdz to downgrade to V10,then you can flash a V20 version
Enviado desde mi LG-E610 usando Tapatalk 4
Click to expand...
Click to collapse
Where did you hear it, my bro?
DevastatingTech said:
Stop pressing the power button when lights turn on.
And downgrade to v10 is not required. You can flash v20 over v20.
---------- Post added at 11:57 PM ---------- Previous post was at 11:56 PM ----------
Where did you hear it, my bro?
Click to expand...
Click to collapse
Well, in my experience LOL
Enviado desde mi LG-E610 usando Tapatalk 4
chrisdlc119 said:
Are you pressing just Volume - button? Or both (+ and -)? First you need to flash a kdz to downgrade to V10,then you can flash a V20 version
Enviado desde mi LG-E610 usando Tapatalk 4
Click to expand...
Click to collapse
Thanks for the answer, I'm pressing both the buttons (+ and -) and hold the power button at the same time, If I want flash the kdz I just need press the - button ?
Unfor80 said:
Thanks for the answer, I'm pressing both the buttons (+ and -) and hold the power button at the same time, If I want flash the kdz I just need press the - button ?
Click to expand...
Click to collapse
for download mode , press vol + and - and plugin the USB cable which is already connected to your pc
stuck
Hi, I've tried to put stock firmware using KDZ tool, after the process has finished, the smartphone keep stucked on LG boot logo, I already do the hard reset and keeps stuck on logo, someone knows what else can I do ?
Unfor80 said:
Hi, I've tried to put stock firmware using KDZ tool, after the process has finished, the smartphone keep stucked on LG boot logo, I already do the hard reset and keeps stuck on logo, someone knows what else can I do ?
Click to expand...
Click to collapse
Thanks for the help guys, I managed the problem, I just use adb to fix this, indeed, I just type: adb reboot recovery .
i have downloaded the drivers and ODIN and the latest TWRP, but when i tried rebooting it stuck on samsung logo, now even ODIN won't flash anything gives me fails message every time i try to flash the recovery again, and reboots the phone before even finishing.
can some one help me
my phone SAMSUNG S8 G950FD
Tried to flash stock? Try dead flashing, is your phone visible in adb console ?
Wysłane z mojego SM-G950F przy użyciu Tapatalka
Repo92 said:
Tried to flash stock? Try dead flashing, is your phone visible in adb console ?
Wysłane z mojego SM-G950F przy użyciu Tapatalka
Click to expand...
Click to collapse
well I've tried to use ADB but it won't read the phone, the computer reads it when i boot into download mode but ADB won't, is there any drivers missing ?
Try use another USB port, rebooting your PC, reinstall drivers, reboot your phone.
Wysłane z mojego SM-G950F przy użyciu Tapatalka
I had this problem too and after many hours I found a solution. When the flash fails and the mobile redtarts, quickly press volume down, bixby button and power button to go into download mode again. Don't let the phone go into boot. The second time it will flash correctly.
DevilDante24 said:
I had this problem too and after many hours I found a solution. When the flash fails and the mobile redtarts, quickly press volume down, bixby button and power button to go into download mode again. Don't let the phone go into boot. The second time it will flash correctly.
Click to expand...
Click to collapse
yup I've tried that and it works thanks, now i think i should flash the stock rom, but why flashing TWRP keep the phone on SAMSUNG logo, is there any solution for that
i have tried something, I've flashed BL and CP files and the phone booted into TWRP but it still won't start if i rebooted system!! ,does that means the system file is corrupted should i install official stock rom, or if i installed a custom rom it would start normally
Install AQF7 bootloader otherwise you will be stuck at boot
Try this !
Prepare ODIN with the files CL + BL.
This worked for me this way, my phone was like yours...
I Cannot turn phone off too.
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Yup I've tried Odin again and pressed the download mode combination and I've entered the TWRP recovery and flashed Batman Rom and it worked fine thank to u guys I'm out of this, I'm so grateful to u all
DevilDante24 said:
I had this problem too and after many hours I found a solution. When the flash fails and the mobile redtarts, quickly press volume down, bixby button and power button to go into download mode again. Don't let the phone go into boot. The second time it will flash correctly.
Click to expand...
Click to collapse
Good tip thank you at least ive now got my pc to recognise my phone
---------- Post added at 11:56 AM ---------- Previous post was at 11:03 AM ----------
AngelOfBlood said:
Try this !
Prepare ODIN with the files CL + BL.
This worked for me this way, my phone was like yours...
I Cannot turn phone off too.
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Click to expand...
Click to collapse
Do you mean CP + BL ??
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
AngelOfBlood said:
Try this !
Prepare ODIN with the files CL + BL.
This worked for me this way, my phone was like yours...
I Cannot turn phone off too.
There's a trick...
All the time you enter in Download mode, and hit Start in Odin, the Odin says "FAIL" and the phone automatic reboot.
The trick is..
When in "Download mode" Start and at the same time press and hold "Vol Down + Bixby + Power".
Odin says FAIL and it will restart the phone automatic.
Press faster and hold "Vol Down + Bixby + Power" to go again to "Download mode".
Press Start in Odin and be prepared to press and hold at the same time "Vol UP + Bixby + Power".
Odin will start to transfer the files... and after that the phone reboot again faster, just press and hold one more time and faster "Vol UP + Bixby + Power".
TWRP will start !
Hope it helps
Click to expand...
Click to collapse
Do you mean CP + BL ?? plus the links are dead ?
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Vermillion_PT.2 said:
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Click to expand...
Click to collapse
Try to power off your phone and press volver+, vol- and power at the same time until mi logo appears. Then release allí buttons
Enviado desde mi Redmi 4 mediante Tapatalk
Dang! I don't know why. But it's worked!!! Thanks man!!!!
Hi all!
First, english is not fluent for me, so excuse me for grammatical/temporal mistakes in my words.
It is now 12 days I am with my A1 phone bricked. It's bricked because I try to relock my phone with TWRP installed for making an OTA update.... I shouldn't, I know that now. My phone didn't wanted to boot, only on fastboot mode. But I couldn't flash anything because my bootloader seems to be locked now.
I disable the driver enforcement signature, installed the qualcomm drivers, open my phone and use the tespoints method. And my phone boot and this EDL mode 9008, and miflash tool saw it on COMxx and I was able to flash the fastboot july release. I was so happy! :laugh: But, then, the phone now stay in black screen mode :crying: If I plug an USB cable for charge or on PC, the white led blink 3 times. I tried to push the power button during a few minutes, I tried to push power and volume up, power with volume down, power with volume up and down. I tried to reflash 3 times in miflash, everytimes it's a success flash, but I'm still stuck on that black screen mode. I don't know how to exit or if my phone is dead. I tried several USB port and cable too, that doesn't change anything.
Does anyone have any idea how i can exit this annoying black screen blinking white led mode? Or my phone is definitly dead? I searched but I didn't find a solution that works for my phone.
eljulien said:
Hi all!
First, english is not fluent for me, so excuse me for grammatical/temporal mistakes in my words.
It is now 12 days I am with my A1 phone bricked. It's bricked because I try to relock my phone with TWRP installed for making an OTA update.... I shouldn't, I know that now. My phone didn't wanted to boot, only on fastboot mode. But I couldn't flash anything because my bootloader seems to be locked now.
I disable the driver enforcement signature, installed the qualcomm drivers, open my phone and use the tespoints method. And my phone boot and this EDL mode 9008, and miflash tool saw it on COMxx and I was able to flash the fastboot july release. I was so happy! :laugh: But, then, the phone now stay in black screen mode :crying: If I plug an USB cable for charge or on PC, the white led blink 3 times. I tried to push the power button during a few minutes, I tried to push power and volume up, power with volume down, power with volume up and down. I tried to reflash 3 times in miflash, everytimes it's a success flash, but I'm still stuck on that black screen mode. I don't know how to exit or if my phone is dead. I tried several USB port and cable too, that doesn't change anything.
Does anyone have any idea how i can exit this annoying black screen blinking white led mode? Or my phone is definitly dead? I searched but I didn't find a solution that works for my phone.
Click to expand...
Click to collapse
Push and keep power button until your phone will restart
mar.ur said:
Push and keep power button until your phone will restart
Click to expand...
Click to collapse
I already tried that during 3-4 minutes. How long do I need to push it?
eljulien said:
I already tried that during 3-4 minutes. How long do I need to push it?
Click to expand...
Click to collapse
About 10 s . Try to push volume down and power button together and keep untill restart to fastboot
If doesn't work it can mean that power button has broken when you was opening the phone .
Well, I don't think it's the power button broken because if I plug the phone for charging, the led blink. If I disconnected the phone from charge and push the power button for 10s or more, nothing happen. If I put the phone and charge, start to push the power button then unplug the charge cable with power button still pushing it blinks 3 times after unplugged, then nothing. It's a small difference, but still a little reaction so I don't think the power button is the problem, but I'm not sure of that
eljulien said:
Well, I don't think it's the power button broken because if I plug the phone for charging, the led blink. If I disconnected the phone from charge and push the power button for 10s or more, nothing happen. If I put the phone and charge, start to push the power button then unplug the charge cable with power button still pushing it blinks 3 times after unplugged, then nothing. It's a small difference, but still a little reaction so I don't think the power button is the problem, but I'm not sure of that
Click to expand...
Click to collapse
When you connect phone with pc check what recognize in device manager . You can be in qdlooader 9008 or in diagnostic e900 . Always check what is in device manager after connect phone with pc . You will be know in which state is your phone . I don't know if your phone is in edl mode .
try holding on the power button and volume UP (not down) buttons for 10 secs and it should restart, I got into the same problem as u and that is what fixed it for me
if that doesnt work here is a link to a post with a guy that has the same problem: https://forum.xda-developers.com/mi-a1/help/black-screen-xiaomi-mi-a1-reboot-power-t3728497
If I connect the phone to the computer, it shows nothing. I have to bridge the tespoints to make it appears, and then it appears in Qualcomm HS-USB QDLoader9008 (COM10). And then I can flash with miflash and miflash tells me that it's a success.
I have exactly the same problem. Looking for a solution for weeks now. Tried everything that is on the net but still black screen
daveve said:
I have exactly the same problem. Looking for a solution for weeks now. Tried everything that is on the net but still black screen
Click to expand...
Click to collapse
Sorry to read that but I think our phones are dead honestly. I don't see what to try to make it rise from the shadows of this black screen At least, I learn how to go in EDL mode and never relock bootloader with custom recovery. It's an expensive lesson but...
Thanks to you guys for answering and helping me
what is android virson????
rawnel said:
what is android virson????
Click to expand...
Click to collapse
Android 8.1 july patch was installed via EDL mode with miflash tool.
eljulien said:
Android 8.1 july patch was installed via EDL mode with miflash tool.
Click to expand...
Click to collapse
The same thing happens to you. Could you solve it ??
I was in the same situation until i flashef nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
I was in the same situation until i flashed nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:35 PM ----------
I was in the same situation until i flashed nougat,.
ccalixtro said:
I was in the same situation until i flashef nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
I was in the same situation until i flashed nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:35 PM ----------
I was in the same situation until i flashed nougat,.
Click to expand...
Click to collapse
Also try to flash to Nougat and the problem is not fixed, the vibration is more intermittent only. Thanks for the input.
Enviado desde mi GT-I9505 mediante Tapatalk
XuFLeS said:
Also try to flash to Nougat and the problem is not fixed, the vibration is more intermittent only. Thanks for the input.
Enviado desde mi GT-I9505 mediante Tapatalk
Click to expand...
Click to collapse
same porblem
How do you get to the recovery under Pie? The previous key combination does not work anymore. It always comes back the start screen.
fenie said:
How do you get to the recovery under Pie? The previous key combination does not work anymore. It always comes back the start screen.
Click to expand...
Click to collapse
Power off device.
Hold Vol Down + Power buttons
When lg logo appears, release Power button (still holding VolDown) then quickly press and hold Power
I read this somwhere but don't remember where
I think this should be the same as G7
https://thedroidguy.com/2019/09/how-to-fix-lg-g7-thinq-boots-to-recovery-mode-1092121
Wysłane z mojego LG-H870 przy użyciu Tapatalka