Hello guys, my phone is bricked for 2 days now after i flash stock firmware. it fails to system.img (I dont know what happened maybe i installed wrong variant) Phone written at the back G930FD so i flashed the G030FD one. then i tried to flash the G930F but still failed Now i tried to install TWRP and succeed. then when i look at the /data it has 0mb so i changed it from ext4 to ext2 then it displayed some digits now from 0, but still failed to flash stock and has bootloop if i install a custom rom. (the day ends there) on the next day, tried to change it to ext4 to exFat now it gets worsed its stuck with formatting.. and i can't turn it off, so waited it ro ran out of battery. after i pugged it and boot itself, its now stuck in TWRP logo and still fail to flash via Odin. the only way that i can see is to restore it via Smart Switch Emergency Software Recovery with recovery code?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so guys it would be appreciated if you can give me fresh back up file. or do you have guys any idea how can i fix this? PS: its lock down right now so i can't send it to repair shop yet and i don't have spare money to buy a new one
A Smartswitch backup won't do you any good. It looks more like the partitiontable is busted. Use Heimdall and dump the pit and look if it checks out.
Gesendet von meinem SM-G930F mit Tapatalk
Related
Sorry guys need some help. I try to go into download mode with my data cable plugged into the PC. After that I saw this? Please any kind soul know how to go into the downloader mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi you are still in download mode have you tried to flash new firmware
I can't using odin 1.7 it will prompt failed.
ok try press volume up and hold the power tell me what happens
It is the same pic as stated. I plug in the charger and it is still the same pic.
do you get failed while flashing firmware threw odin if yes can you tell me what firmware you were on before flashing and what firmware you are trying to flash now reason i ask as i was trying to downgrade firmware i had same problem, so i had to flash the latest firmware and it worked
I was on the P1000DXJK2 at first. I'm trying to flash P1000DXJM4. At first it was successful from the odin 1.7 but when boot up it stayed at the samsung screen. Maybe i need to flash the dbdata.
yeah that could be the problem, put dbdata in pda, no pit
Where can I downlaod dbdata for this firmware P1000DXJM4.
Ok. Thanks bro I managed to get it back. Thousand thanks.
Here you go just unzip and you have a .tar file
celestar32 said:
Ok. Thanks bro I managed to get it back. Thousand thanks.
Click to expand...
Click to collapse
your welcome m8 now you know what to do if it happens again
thx so much
As title states, a friend of mine asked me to try and fix his S1, first of all I boot to download mode (both 3 key & JIG work), and flash a few ROMS in ODIN, but the same thing, it stuck in boot screen, I tried bit 3 files & PIT, with repartition and without, nothing. Also I can't boot into recovery mode, I then open the device to check for any corrosion, but it's clean as a baby ass, then I disconnect the internal battery and connect back, but still no news, also it do charge the battery but not show it on the screen :
CHARGE:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BOOT:
Any help is more then wellcome :good:
hmm which Roms did you flash? Have you tried a Stock Rom? Or put the battery out for a few hours and then try again. Does the battery have enough power? happend to me one time xD
I flashed only stock GB ROMS, the battery indeed have enough power (the phone not boot, but the charging functionality are still in tact, I double checked it with a multimeter), I also cant be sure if there is a problem with the internal memory as it not boot pass the opening screen.
maybe there a safemode? or a fastboot solutions? I tried to repartitions an uSD card to 2GB EXT4 + FAT32 the left space, then flash wit ODIN, but it no write any data on the uSD...
Hi all! Walked into the lake with my phone in the rear pocket - doh! Here is what I did so far ...
1. Turned off
2. Removed battery
3. Disassembled phone
4. Dried it out
5. Cleaned all the components with isopropyl
6. Put in a new battery
Turns on fine
Goes into d/l mode
I can flash firmware to it via Odin
Will NOT boot
Will NOTgo into recovery
I have tried various stock firmwares from Samobile - they all do the same thing - see pictures below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ANY firmware I try does this after Odin is "Successful" Blue writing says " Recovery Booting ... but it just sits there.
Any ideas? It is a stock Rogers phone but I don't mind using any Firmware ion any network if I can get it up and running - I'll just unlock it later.
Thanks!
Also, can I try to re-partition it using a .pit file? I've only ever used Odin for flashing firmware. Where can I get .pit files, can't seem to find them anywhere.
ixoye777 said:
Also, can I try to re-partition it using a .pit file? I've only ever used Odin for flashing firmware. Where can I get .pit files, can't seem to find them anywhere.
Click to expand...
Click to collapse
I work at a repair shop and had the exact same thing happen this past weekend. No luck. same result. freezes when booting into recovery. thats water damage for ya.
I don't know what happened to my phone. From what I've read, I think its boot loop? I had recently edited my build.prop file. However, I found this was completely unnecessary and was going to overwrite the build.prop file with one that I had backed up to a micro sd card previously. After I did this, I was stuck on the screen(see image). I tried using android recovery mode. I tried "wipe cache partition" and wipe data/factory reset. Afterwards, I tried to reboot from recovery mode, and I saw the word error and the screen was stuck again. I've removed the battery and nothing works. Is something like adb the solution and if so, can someone link me a guide that's really noob friendly. My phone is rooted and this happened after I overwrite the build.prop file and restarted the phone. I have never flashed a rom. Thx in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Similare problem here
I have a similar problem, but a little different...
Rooted the phone and then tried to flash TWRP using their official app., It stated that everything was successful and asked if I wanted to reboot into recovery. I tapped yes so I could make my first backup., Now the phone starts and shows the logo in your image then goes to a blank screen and thats it... Cant boot into recovery or bootloader or anything...
Any advice out there, or do I now won a brick?
I also have this problem and I can not do anything, neither recovery nor odin ...
Hello,
sometime ago, I tried to install a custom ROM (it required a repartitioning script) on my old Samsung Galaxy A3 (2017) - SM-A320FL, but after many attempts I wasn't able to install the OS through the custom recovery (OrangeFox R11.0) so I gave up.
Now I decided to go back at it and give it another shot, but first I wanted to return to Stock ROM to see if everything was okay.
After flashing everything with Odin, the installation of Oreo fails, and so I'm stuck in the Stock Recovery.
I tried to flash the phone many times, I even tried doing Nand Erase and Re-partition by using the PIT file that was in the ROM I downloaded, but the outcome is always the same
(On the first reboot I can see the Android updating page, the installation fails, it throws me in recovery - If I reboot the phone it remains stuck on the white Samsung screen).
The stock Recovery always shows this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I downloaded the firmware files using Friya 1.4.4.0, with the Model set as SM-A320FL and the CSC as ITV (unbranded).
Maybe I choose the wrong CSC, and this is why it's not working, but I'm not sure. The other country codes for my country (IT) should be the following:
FWB, GOM, HUI, OMN (Vodafone), OXA*, TIM, VOM, WIN, XET
Click to expand...
Click to collapse
Honestly, I'm not sure on how this error can still persist after a complete re-flash of the device, so I'm here asking for your help. Thanks.