Just received the OTA for ATE5 update on the G9880. Looks like only a baseband update though... :good:
I am BRI too, but I do not get update yet.
bigcow77 said:
I am BRI too, but I do not get update yet.
Click to expand...
Click to collapse
When i do the search on Frija, it shows no update for BRI yet :good:
Guys, everyone in the phone has no mention of 5g mode anywhere on the BRI region? I found it only on phone's box and on the first screen after turn it on, and nothing else.
sergmarin said:
Guys, everyone in the phone has no mention of 5g mode anywhere on the BRI region? I found it only on phone's box and on the first screen after turn it on, and nothing else.
Click to expand...
Click to collapse
5G has not been enabled for BRI yet... Only way is to change CSC to TGY
Mittesh said:
5G has not been enabled for BRI yet... Only way is to change CSC to TGY
Click to expand...
Click to collapse
Thanks for answer. But which the way to change CSC from BRI to TGY? Firmware for those two regions is the same and contains two CSCs. Use Samkey? Or possible to flash Chinese FW CHC at first and then to try flash TGY?
sergmarin said:
Thanks for answer. But which the way to change CSC from BRI to TGY? Firmware for those two regions is the same and contains two CSCs. Use Samkey? Or possible to flash Chinese FW CHC at first and then to try flash TGY?
Click to expand...
Click to collapse
I used Samkey... Very simple and easy. Someone posted a very detailed set of instructions on another thread and it took less then 5 mins. Had to purchase key from eBay $11 AUD otherwise no issues.
Mittesh said:
I used Samkey... Very simple and easy. Someone posted a very detailed set of instructions on another thread and it took less then 5 mins. Had to purchase key from eBay $11 AUD otherwise no issues.
Click to expand...
Click to collapse
Ok, thanks. Sad for me I have Mac, but Samkey is not work in virtuals...
I got a update for BRI with 5G.
Can i flashed CHC firmware on TGY or BRI?
They're same G9880 model but PDA and CSC. Would it cause a problem with LTE band or 5g?
Matroid said:
Can i flashed CHC firmware on TGY or BRI?
They're same G9880 model but PDA and CSC.
Click to expand...
Click to collapse
Without any problem. Full wipe required.
Matroid said:
Would it cause a problem with LTE band or 5g?
Click to expand...
Click to collapse
I don't know about it.
Hello, which 5g bands are active in BRI fw?
Moreover, which differences between BRI and TGY fw?
Regards to all.
Hey guys! Which CSC do you recommend using in Europe?
barese said:
Hello, which 5g bands are active in BRI fw?
Moreover, which differences between BRI and TGY fw?
Regards to all.
Click to expand...
Click to collapse
BRI 5G Band
zjhao said:
BRI 5G Band
Click to expand...
Click to collapse
Thanks, it's very interesting.
TGY only supports 1,41,78,79.
Does BRI also supports eSIM?
barese said:
Thanks, it's very interesting.
TGY only supports 1,41,78,79.
Does BRI also supports eSIM?
Click to expand...
Click to collapse
Currently, every operator in Taiwan does not support the S20 series e-SIM function
Any info about TGY August update?
Not yet released and next month is about to come..
Anyone here know how to change csc from china to other one ?
jucin said:
Anyone here know how to change csc from china to other one ?
Click to expand...
Click to collapse
You can check here:
https://forum.xda-developers.com/galaxy-s20/how-to/free-csc-change-apk-s20-t4116015
barese said:
You can check here:
https://forum.xda-developers.com/galaxy-s20/how-to/free-csc-change-apk-s20-t4116015
Click to expand...
Click to collapse
Not working i am on july patch it dont show anythink in themes
Related
4.1.2
baseband dlk7
kernel 3.0.31-679347
bld jz054k.n7100xxdll4
nice, but most important question is what csc do you have?
and where in the world you are and with which mobile provider do you use etc,when you open a thread make sure you do it properly mate
France DLL4...Bangladesh DLL2...Sri Lanka DLL2...Nepal DLL2...and India DLL2.. has N7100XXDLL4
promi said:
nice, but most important question is what csc do you have?
Click to expand...
Click to collapse
Doesn't my build number above, show you the CSC?
US ATT SIM, French stock GT-N7100.
heinrich said:
Doesn't my build number above, show you the CSC?
US ATT SIM, French stock GT-N7100.
Click to expand...
Click to collapse
On your Galaxy note 2 keypad, then tap *#1234#. Then you will get your firmware info
heinrich said:
Doesn't my build number above, show you the CSC?
US ATT SIM, French stock GT-N7100.
Click to expand...
Click to collapse
No, because as far as i know csc from *#1234# don't show what csc your phone is using.
for example entering *#1234# on my note shows: N7100OXXALJ4 but csc is XEO <- and you get firmware update based on this csc.
To determine what csc is set, use this app: https://play.google.com/store/apps/details?id=com.manniakk.cscselector or check kies (csc in brackets)
And if your phone is "open" french, csc should be XEF, and XEF update is available since 20 Dec.
I just plugged into KIES and tried OTA, DBT still hasn't received the update as of 10:30 AM on 24/12/12 +1 (Madrid, Spain). Lame ... PLEASE SAMSUNG! XMAS PRESENT!
Yep.
Samsung makes strange things regarding updates.
N7100XXDLL4 contains OXA multi CSC (BTU, CPW, DBT, ITV, XEF, XEO) and only XEF is released. I don't see any reason, why not to release remaining CSC. Samsung do really strange things.
Edit: only thing that i can think of is exynos exploit.
Merry Christmas Everyone
turborider said:
wth,he open e freaking thread and he still not put right info,prick
Click to expand...
Click to collapse
Think you need to take a chill pill dude. Getting abusive on a mobile phone forum.... Really? Chill man
Sent from my Samsung Note II.
turborider said:
wth,he open e freaking thread and he still not put right info,prick
Click to expand...
Click to collapse
Someone clearly got coal in his stocking and wants to take it out on the internet...
Chill... Seriously... That's not how to behave here, we won't stand for it.
Is there any way to just freeze the phone at the current OS version without accepting updates? OS updates have been the bane of my existence.
i got mine updated to OTA
XEF France international n7100
To be honest it still feels exactly the same lol, the notifcation toggles is bonus
Hey
i flashed a couple of roms before so i decided to try the xnote rom but during in aroma installer its asking me to choose csc what is it?if i choose a wrong CSC can it lock or brick my device or something?thanks
Basically its your region. CSC NEE is nordic unlocked, BRI is Taiwan unlocked and DBT is German unlocked.
You wont brick it of course.
tcntad said:
Basically its your region. CSC NEE is nordic unlocked, BRI is Taiwan unlocked and DBT is German unlocked.
You wont brick it of course.
Click to expand...
Click to collapse
I am from israel that's why i don't know which one to choose...if i choose a wrong CSC can it make problems?
VodkaPlease said:
I am from israel that's why i don't know which one to choose...if i choose a wrong CSC can it make problems?
Click to expand...
Click to collapse
No it woudnt cause any issues. But you will recieve updates for another region than Israel.
tcntad said:
No it woudnt cause any issues. But you will recieve updates for another region than Israel.
Click to expand...
Click to collapse
thank you very much
Is CSC related to modem ?
Can I run a XXUEMKE modem with XXUBMGA CSC ?
Hey y'all,
I've had this S7 Edge International version for a while, and I was wondering if there is any way to improve signal. My internet is slow when I'm not on WIFI, I notice that in certain areas it is good, and most areas is just 1 bar which is meh. Any way to change some settings on the phone to fix this?
what csc are using? I got a France 935 and xfe works OK on AT&T. I did read you don't want to use an AT&T csc as it would be for a snapdragon and mess up a exynos based phone. maybe try BTU
UberBock said:
what csc are using? I got a France 935 and xfe works OK on AT&T. I did read you don't want to use an AT&T csc as it would be for a snapdragon and mess up a exynos based phone. maybe try BTU
Click to expand...
Click to collapse
how do i check which CSC it is?
*#12580*369# in the dial section on the phone app it will list it. it's the 3 letters after G935F
UberBock said:
*#12580*369# in the dial section on the phone app it will list it. it's the 3 letters after G935F
Click to expand...
Click to collapse
it says UUB
I think that is a multi csc for Latin America. might look around xda about using a different open multi csc. also are u updated to latest firmware. maybe since it is an international grab one from UK that has an updated modem (cp) file.
UberBock said:
I think that is a multi csc for Latin America. might look around xda about using a different open multi csc. also are u updated to latest firmware. maybe since it is an international grab one from UK that has an updated modem (cp) file.
Click to expand...
Click to collapse
How do I do this? and does it trip knox?
if you update to an official Samsung version Knox will not trip. look for entries about official Samsung firmware and Odin. I assume that this international s7 edge will not be back in it country of origin. if it was and on a network there you'd get updates. if it is in the United States on AT&T then no updates would be pushed to the phone since they would be for the snapdragon version.
UberBock said:
if you update to an official Samsung version Knox will not trip. look for entries about official Samsung firmware and Odin. I assume that this international s7 edge will not be back in it country of origin. if it was and on a network there you'd get updates. if it is in the United States on AT&T then no updates would be pushed to the phone since they would be for the snapdragon version.
Click to expand...
Click to collapse
I get updates, it's just software updates though, nothing AT&T pushes afaik.
I meant firmware updates from either Samsung or your carrier. if you use *#12580*369# the first two lines should end in BPHJ. That would be an updated firmware. what do the first two entries say
uberbock said:
i meant firmware updates from either samsung or your carrier. If you use *#12580*369# the first two lines should end in bphj. That would be an updated firmware. What do the first two entries say
Click to expand...
Click to collapse
ap: G935fxxu1bph8
cp: G935fxxubph1
Hello,
Yesterday I downloaded the Vodafone Italian Nougat firmware, flashed it and immediately as my S7E turned on I saw that the firmware was wrong.
In fact the firmware is from Germany No Brand, I already downloaded it again just to make sure that I didn't made any mistakes, flashed it again and I have the same problem.
Sammobile take up to 10 days to respond, So I'm asking if anyone else has this problem, or maybe can anyone upload the real Vodafone Italia Nougat firmware:
Model SM-G935F
Model name Galaxy S7 edge
Country Italy (Vodafone)
Version Android 7
Changelist 10422490
Build date Mon, 20 Feb 2017 06:27:00 +0000
Security Patch Level 2017-02-01
Product code OMN
PDA G935FXXU1DQBT
CSC G935FVFG1DQBT
Thanks everyone
your firmware can be download from here.
http://updato.com/firmware-archive-select-model?q=G935F&r=OMN&order=date&dir=desc&exact=1
edan1979 said:
your firmware can be download from here.
http://updato.com/firmware-archive-select-model?q=G935F&r=OMN&order=date&dir=desc&exact=1
Click to expand...
Click to collapse
Thanks, will download, flash and report back here
I downloaded that one myself some days ago and had no issues.
However, I am wondering why did you flash it if it was wrong. You can easily determine it by the filename.
Has your device been on OMN before?
andiling said:
I downloaded that one myself some days ago and had no issues.
However, I am wondering why did you flash it if it was wrong. You can easily determine it by the filename.
Has your device been on OMN before?
Click to expand...
Click to collapse
Yes mine is branded Vodafone, but I had the UK Nougat flashed, now I saw that finnaly Italian Vodafone Nougat became available I donwloaded it to flash, but the guys from sammobile made an mistake, yes the firmware is Vodafone, but it's germany not italy
It contains actually several countries but all are Vodafone branded.
Did you have a Vodafone Italy SIM inside when booting up for the first time?
edan1979 said:
your firmware can be download from here.
http://updato.com/firmware-archive-select-model?q=G935F&r=OMN&order=date&dir=desc&exact=1
Click to expand...
Click to collapse
Update.....Tried to flash it 2 times, but the same result, I dont know what's going on, I'm still on Germany Vodafone firmware.
Can anyone help please?
andiling said:
It contains actually several countries but all are Vodafone branded.
Did you have a Vodafone Italy SIM inside when booting up for the first time?
Click to expand...
Click to collapse
Yes ofcourse, I an prepaid Vodafone SIM installed. The phone was not bought under any contract with Vodafone
the firmware is multi csc files with Germany is the main CSC. we cannot do anything with it. The only way i know how to change the csc fully to your country is via Samsung Service Center or you need to root the device and do it with samsung phoneinfo apps. Root and you will loose samsung pay function/secure folder and any knox related software like shealth
Usually the CSC changes accordingly to the sim inserted. Only if there's no corresponding csc it takes the default one in multi csc roms.
Please download Phone INFO ★Samsung★ and posts screens here to see what's really going on.
Here's the screenshot
Anyone has an solution?
blackfire2802 said:
Anyone has an solution?
Click to expand...
Click to collapse
Flash your original marshmallow firmware using the CSC. It will factory reset your device
Flash the latest Nougat firmware using the HOME_CSC from your original firmware (can be the marshmallow one or if you have an Nougat one, use this). Don't use the nougat CSC file anymore.
Unfortunately without a Single CSC file you are not getting back to your original CSC and a single CSC has not been published for Vodafone Italy. In case of multi CSC the system uses the CSC already applied or in case of change (since you've BTU at the moment) the standard CSC which is VD2 (Vodafone Germany) in this case.
The only way to change that is with root.
andiling said:
Unfortunately without a Single CSC file you are not getting back to your original CSC and a single CSC has not been published for Vodafone Italy. In case of multi CSC the system uses the CSC already applied or in case of change (since you've BTU at the moment) the standard CSC which is VD2 (Vodafone Germany) in this case.
The only way to change that is with root.
Click to expand...
Click to collapse
I said using CSC meaning the firmware included all the stuff of your firmware.
Sent from my SM-G935F using XDA-Developers Legacy app
Unfortunately that won't help as there's no firmware which only includes Vodafone Italy. There's only one with several European Vodafone settings and if you flash that onto a device with non-Vodafone CSC such as BTU it used the standard CSC included which is Vodafone Germany. I thought first different, too, unfortunately there's no way without root (tested it by myself).
Rooting is out of picture, because I don't want to loose warranty.
I'll try to download and flash Vodafone Italy MM, then flash it, after I'll flash again the nougat with the old MM csc.
Edit: in this case I'll wait for a few weeks until Vodafone Italy will release the proper csc file.
Thanks
Flash this CSC file in Odin without rooting to enable Volte.
https://drive.google.com/open?id=0BxqHpwwlXBjIYnZ2Qm9idE5abjg
Is this for Snapdragon?
Only for exynos version bought outside India to gain VOLTE
farookh said:
Flash this CSC file in Odin without rooting to enable Volte.
https://drive.google.com/open?id=0BxqHpwwlXBjIYnZ2Qm9idE5abjg
Click to expand...
Click to collapse
That's great one buddy! Can you do this for Note 5 as well?
swrpgalaxy said:
That's great one buddy! Can you do this for Note 5 as well?
Click to expand...
Click to collapse
This is INS CSC from Note 5 India N920G
flash cache.tar.md5 in odin csc to enable volte in note 5
https://drive.google.com/open?id=0BxqHpwwlXBjIZVdrVGNzNEJhSFU
farookh said:
Flash this CSC file in Odin without rooting to enable Volte.
https://drive.google.com/open?id=0BxqHpwwlXBjIYnZ2Qm9idE5abjg
Click to expand...
Click to collapse
I have a unlocked s8+ from UK, was with Vodafone but I've put the no brand firmare but with ee I have not volte.
If I will flash this, I will have volte without have any other problem?
Thank you
farookh said:
Flash this CSC file in Odin without rooting to enable Volte.
https://drive.google.com/open?id=0BxqHpwwlXBjIYnZ2Qm9idE5abjg
Click to expand...
Click to collapse
can you make it a zip somehow
swrpgalaxy said:
That's great one buddy! Can you do this for Note 5 as well?
Click to expand...
Click to collapse
marko68 said:
I have a unlocked s8+ from UK, was with Vodafone but I've put the no brand firmare but with ee I have not volte.
If I will flash this, I will have volte without have any other problem?
Thank you
Click to expand...
Click to collapse
EE UK CSC file
https://drive.google.com/open?id=0BxqHpwwlXBjIQnIzRlQ0WV9CMWs
Can you please provide steps to flash using odin?
farookh said:
Flash this CSC file in Odin without rooting to enable Volte.
https://drive.google.com/open?id=0BxqHpwwlXBjIYnZ2Qm9idE5abjg
Click to expand...
Click to collapse
Can you also kindly share the CSC for Note4 ? (Need it for a N910U(Exynos) which has an Intel XM7260 modem)
Need India CSC file for Samsung Galaxy S8+ 128 Gn
Hi
I would really appreciate if you can share the india csc file for galaxy s8+ 128 GB that I brought from South Korea. It is KT operator locked and i need to use it in India. Many thanks in advance!
farookh said:
Flash this CSC file in Odin without rooting to enable Volte.
https://drive.google.com/open?id=0BxqHpwwlXBjIYnZ2Qm9idE5abjg
Click to expand...
Click to collapse
Hi i am unable to flash. it fails everytime and "SYSTEM REV. Invalid magic string" message appears on the left upper corner of the phone. i have Note 5 920C. flashed with 'Cambodia' firmware.
Please help?
Can you send ATT Mexico CSC IUS for S8+ ? SM-G955F
I have S8+ with (SM-G955F). Volte not working. Can I flash it with SM-G955FD) software?
pvr1946 said:
I have S8+ with (SM-G955F). Volte not working. Can I flash it with SM-G955FD) software?
Click to expand...
Click to collapse
Yeah, both are similar.
Can this be installed on S6 Oreo firmware? JIO sim
moneyrockers said:
Can this be installed on S6 Oreo firmware? JIO sim
Click to expand...
Click to collapse
Exynos or snapdragon?
nimms said:
Exynos or snapdragon?
Click to expand...
Click to collapse
Exynos G920I
moneyrockers said:
Exynos G920I
Click to expand...
Click to collapse
Just download G920F firmware and flash just the CSC part or whole rom with Odin.. (make a full back up first)
hello sir
l have samsung s8+ with firmware
G955fxxu6dsk9 bootloader
G955foxm6dsk9 csc
region germany BDT
Can you please provide steps to flash using odin?