Hey
i flashed a couple of roms before so i decided to try the xnote rom but during in aroma installer its asking me to choose csc what is it?if i choose a wrong CSC can it lock or brick my device or something?thanks
Basically its your region. CSC NEE is nordic unlocked, BRI is Taiwan unlocked and DBT is German unlocked.
You wont brick it of course.
tcntad said:
Basically its your region. CSC NEE is nordic unlocked, BRI is Taiwan unlocked and DBT is German unlocked.
You wont brick it of course.
Click to expand...
Click to collapse
I am from israel that's why i don't know which one to choose...if i choose a wrong CSC can it make problems?
VodkaPlease said:
I am from israel that's why i don't know which one to choose...if i choose a wrong CSC can it make problems?
Click to expand...
Click to collapse
No it woudnt cause any issues. But you will recieve updates for another region than Israel.
tcntad said:
No it woudnt cause any issues. But you will recieve updates for another region than Israel.
Click to expand...
Click to collapse
thank you very much
Is CSC related to modem ?
Can I run a XXUEMKE modem with XXUBMGA CSC ?
Related
Hi. I am kinda new to S4. I bought my phone in baltic region but my phone has CSC EVR (its UK). As they are delaying updates a lot what will happen if I will download firmware for SEB region from Sammobile and flash it via Odin? Is there any danger to brick the phone? Will CSC then will change to SEB?
Thanks in advance.
Leinger said:
Hi. I am kinda new to S4. I bought my phone in baltic region but my phone has CSC EVR (its UK). As they are delaying updates a lot what will happen if I will download firmware for SEB region from Sammobile and flash it via Odin? Is there any danger to brick the phone? Will CSC then will change to SEB?
Thanks in advance.
Click to expand...
Click to collapse
U can download firmware for same variant and install it using Odin no plm
for more info on CSC etc u go to the banner link on my signature
123hiten said:
U can download firmware for same variant and install it using Odin no plm
for more info on CSC etc u go to the banner link on my signature
Click to expand...
Click to collapse
Worked like a charm :good: Thanks mate!
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
I have galaxy s4 i9505 and after region changing my csc is ALB, i can't get updates. What can i do? It is multi-csc... Region SEB, but CSC ALB.
So I will not get updates?
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Meyhemg said:
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Click to expand...
Click to collapse
My CSC now is ALB, and i can't find this rom on samsung-updates.com
Before that the CSC was different?
Meyhemg said:
Before that the CSC was different?
Click to expand...
Click to collapse
Before was DTM
Vartotojas258 said:
Before was DTM
Click to expand...
Click to collapse
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Meyhemg said:
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Click to expand...
Click to collapse
I'm from lithuania, but when buy the phone csc was dtm.
Vartotojas258 said:
I'm from lithuania, but when buy the phone csc was dtm.
Click to expand...
Click to collapse
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Meyhemg said:
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Click to expand...
Click to collapse
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Vartotojas258 said:
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Click to expand...
Click to collapse
Yeah that's an option also.
Also, did you try factory reset after the installation? If not, do it. It sometimes helps, in my case it didn't help to change the CSC to DBT when I installed the German rom.
I hope Kitkat will arrive soon to our devices. I can't wait to see the improvements and how did they change the TW.
Hello i bought my SGN3 wit XEH csc code. I wanted change it on XEO, but i install bad singapore XSP firmware on my phone it is only in english i need czech language.... .... firmware was from sammobile... i try get old firmware to device and now when i turn on mobile - no sound and no signal... i can´t connect to network.... please need help...
WantedJoker said:
Hello i bought my SGN3 wit XEH csc code. I wanted change it on XEO, but i install bad singapore XSP firmware on my phone it is only in english i need czech language.... .... firmware was from sammobile... i try get old firmware to device and now when i turn on mobile - no sound and no signal... i can´t connect to network.... please need help...
Click to expand...
Click to collapse
Have you tried to put back XSP Singapore firmware ?
AFAIK, you can't flash back your old firmware, because your bootloader has been upgraded to NE4 bootloader (comes with XSP Singapore firmware).
Therefore, you can only wait for NE4 or newer firmware for your region.
antique_sonic said:
Have you tried to put back XSP Singapore firmware ?
AFAIK, you can't flash back your old firmware, because your bootloader has been upgraded to NE4 bootloader (comes with XSP Singapore firmware).
Therefore, you can only wait for NE4 or newer firmware for your region.
Click to expand...
Click to collapse
singapore firmware connect to network and sounds are good, but there is not czech language...
WantedJoker said:
singapore firmware connect to network and sounds are good, but there is not czech language...
Click to expand...
Click to collapse
If you are rooted device there's a work around on it i think
antique_sonic said:
Have you tried to put back XSP Singapore firmware ?
AFAIK, you can't flash back your old firmware, because your bootloader has been upgraded to NE4 bootloader (comes with XSP Singapore firmware).
Therefore, you can only wait for NE4 or newer firmware for your region.
Click to expand...
Click to collapse
Agreed, OP can only wait for a NE4 firmware, but you could try to install morelocal2
i have´t root. How i can set czech language in MoreLocale2?
Do you know about some firmware with NE4 bootloader included czech language?
Try to flash my rom its almost stock
Which your rom?
Hello,
i have a belgian S7 edge and flashed a while ago the british nougat beta firmware.
yesterday i wanted to go back to my countries own firmware but was still marshmallow on sammobile.
so i installed this version using odin.
but when i did a recovery and wiped everything it installed german apps and the language was in german.
i tought that my CSC wasnt correct so i only flashed the CSC from the marshmallow rom for my country but the problem remains.
now i have multi CSC but i only want one and that is CSC PRO (Belgium Proximus)
how can i fix this? i tried the code with *#27*imei# but nothing works?
because of this problem i cannot use VOLTE on my own operator.
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
And which csc shpuld i choose for example?
_DrG_ said:
You need to flash a totally different CSC that is not multi csc with re partiton enabled in Odin... then flash the csc you want to be on again with re partition enabled in Odin.
Click to expand...
Click to collapse
And which csc should i choose for example?
nielsvg said:
And which csc should i choose for example?
Click to expand...
Click to collapse
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
I also have the same problem. Last month I flashed a BTU firmware because I haven't got the Nougat update yet here in the Philippines and I really wanted to try out the Nougat update as soon as it started rolling out in UK. This month the Nougat update finally rolled out here in the Philippines so I decided to go back to Philippine firmware which is XTC. After flashing I got the Thailand CSC (THL) even though I flashed the Philippine firmware (XTC). My s7e is not rooted and I have no plans on rooting it. Can someone help me go back to Philippine CSC? Thanks in advance.
Piravinth said:
Try flashing a KSA CSC firmware (Saudi Arabia) and then flash the CSC firmware you want
Click to expand...
Click to collapse
And this will surely work because on sammobile forum they say it isnt possible to change it back
nielsvg said:
And this will surely work because on sammobile forum they say it isnt possible to change it back
Click to expand...
Click to collapse
The CSC you are trying to flash maybe part of the same firmware so you have to change to another csc entirely. Try KSA CSC firmware and flash the PRO CSC firmware
I am in the UK and my phone orgibally had XEU CSC and I wanted to flash the BTU CSC to get Nougat however because BTU and XEU were in the same firmware this meant when I flashed the BTU CSC I still had the XEU CSC.
So I flashed KSA CSC and flashed BTU CSC and now I have BTU
Piravinth said:
The KSA CSC wouldn't be part of the multi-csc you have so if you flash that and flash the firmware that has the CSC you want you should get that CSC
I am in the UK and had the XEU CSC and wanted to flash the BTU CSC to get Nougat however because BTU is part of a multi-csc this meant when I flashed the BTU CSC I still had the XEU CSC. I flashed KSA CSC and flashed BTU CSC and now I have BTU
Click to expand...
Click to collapse
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
nielsvg said:
Do i have to turn on re partitioning when flashing ksa csc and have i turn it on again when flashing pro csc ?
Click to expand...
Click to collapse
Yes
Piravinth said:
Yes
Click to expand...
Click to collapse
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
nielsvg said:
Final check to be definitive sure
So when finally flashing pro software with pro csc re partitioning had to be turned on
Click to expand...
Click to collapse
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Piravinth said:
Yes that's what I did and to receive OTA update wipe cache and data, I did it after flashing ksa and BTU just to be sure
Click to expand...
Click to collapse
ok thx will try it now
nielsvg said:
ok thx will try it now
Click to expand...
Click to collapse
Also flash the KSA firmware with reparation enabled
Piravinth said:
Also flash the KSA firmware with reparation enabled
Click to expand...
Click to collapse
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
nielsvg said:
never had a problem with odin but now first time it said failed.
and now second and thirthed time it didnt do anything. it kept saying setupconnection but nothing else happened.
Click to expand...
Click to collapse
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Piravinth said:
Are you using the latest version, v 3.12.3?
Under options in odin the following should be ticked;
Auto Reboot
Re-Partion
F.Reset Time
Click to expand...
Click to collapse
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
nielsvg said:
thx was using older model. i use it a lot but now i am having doubts.
do i only have to add the AP file or do i have to choose the AP file and the CSC file?
Click to expand...
Click to collapse
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Piravinth said:
I added the files into ; BL, AP, CP and CSC. For CSC I didn't choose the home_CSC but the other one
Click to expand...
Click to collapse
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
nielsvg said:
It didnt work. Still on german csc. I did a complete wipe in recovery mode but it is still the same.
I didnt do thuis procedure when i flashed the ksa version
Click to expand...
Click to collapse
What is going on?
When flashing the KSA CSC firmware, did you add the BL,AP,CP AND CSC files and did you choose the csc file and not the home csc?
Did you follow the same step when flashing PRO CSC firmware?