Hello i bought my SGN3 wit XEH csc code. I wanted change it on XEO, but i install bad singapore XSP firmware on my phone it is only in english i need czech language.... .... firmware was from sammobile... i try get old firmware to device and now when i turn on mobile - no sound and no signal... i can´t connect to network.... please need help...
WantedJoker said:
Hello i bought my SGN3 wit XEH csc code. I wanted change it on XEO, but i install bad singapore XSP firmware on my phone it is only in english i need czech language.... .... firmware was from sammobile... i try get old firmware to device and now when i turn on mobile - no sound and no signal... i can´t connect to network.... please need help...
Click to expand...
Click to collapse
Have you tried to put back XSP Singapore firmware ?
AFAIK, you can't flash back your old firmware, because your bootloader has been upgraded to NE4 bootloader (comes with XSP Singapore firmware).
Therefore, you can only wait for NE4 or newer firmware for your region.
antique_sonic said:
Have you tried to put back XSP Singapore firmware ?
AFAIK, you can't flash back your old firmware, because your bootloader has been upgraded to NE4 bootloader (comes with XSP Singapore firmware).
Therefore, you can only wait for NE4 or newer firmware for your region.
Click to expand...
Click to collapse
singapore firmware connect to network and sounds are good, but there is not czech language...
WantedJoker said:
singapore firmware connect to network and sounds are good, but there is not czech language...
Click to expand...
Click to collapse
If you are rooted device there's a work around on it i think
antique_sonic said:
Have you tried to put back XSP Singapore firmware ?
AFAIK, you can't flash back your old firmware, because your bootloader has been upgraded to NE4 bootloader (comes with XSP Singapore firmware).
Therefore, you can only wait for NE4 or newer firmware for your region.
Click to expand...
Click to collapse
Agreed, OP can only wait for a NE4 firmware, but you could try to install morelocal2
i have´t root. How i can set czech language in MoreLocale2?
Do you know about some firmware with NE4 bootloader included czech language?
Try to flash my rom its almost stock
Which your rom?
Related
Hello. I live in Turkey and still no update for us.
So i suppose i can change CSC and get official update from kies.
How can i change CSC to UK ?
After i changed i suppose i will get official uk updates. But would this cause any problem since i live in turkey and uses different service providers
thank you
my phone is currently stock firm 4.0.4 and not rooted
MonsterMMORPG said:
Hello. I live in Turkey and still no update for us.
So i suppose i can change CSC and get official update from kies.
How can i change CSC to UK ?
After i changed i suppose i will get official uk updates. But would this cause any problem since i live in turkey and uses different service providers
thank you
my phone is currently stock firm 4.0.4 and not rooted
Click to expand...
Click to collapse
You will need the full UK ROM from Sammobiles or checkfus.
This may give you the Korean CSC, if it does you will need to download the CSC changer for SGS/2/3 from the market and select BTU, this will wipe your data though.
delsus said:
You will need the full UK ROM from Sammobiles or checkfus.
This may give you the Korean CSC, if it does you will need to download the CSC changer for SGS/2/3 from the market and select BTU, this will wipe your data though.
Click to expand...
Click to collapse
csc changer from market displays on this
sales code : ATO
and no other thing
MonsterMMORPG said:
csc changer from market displays on this
sales code : ATO
and no other thing
Click to expand...
Click to collapse
The Turkish ROM contains the CSC for Turkey only I believe, you need to flash the latest ICS from Sammobiles or checkfus and flash through Odin, then change the CSC.
Btw the English ROM is BTU
and another Btw, we haven't got JB for unbranded devices in UK yet, only O2 and Three carrier branded.
when i type *#1234#
i get these
AP : I9300XXBLH1
CP : I9300XXLH1
CSC : I9300ATOBLH1
so which country is my phone right now ?
I don't know the sales code but if you Google Samsung sales code ATO you will be able to find out.
But because you bought it front Turkey there's a 99% chance ATO is Turkey. If you want the English firmware you needs BTU then change the CSC to BTU (English firmware has a few CSCs included)
Sent from my GT-I9300 using xda premium
CSC is not an upgrade path .
Unless you have the full correct HIDSWVER codes phone will not update .
Solution download stock firmware and flash via \ODIN .
http://forum.xda-developers.com/showthread.php?t=1646610
or use CHECKFUS to download any firmware and flash via ODIN .
jje
JJEgan said:
CSC is not an upgrade path .
Unless you have the full correct HIDSWVER codes phone will not update .
Solution download stock firmware and flash via \ODIN .
http://forum.xda-developers.com/showthread.php?t=1646610
or use CHECKFUS to download any firmware and flash via ODIN .
jje
Click to expand...
Click to collapse
thanks flashing right now lets see
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Dear Friends,
I'm using N9005 on this N9005XXUBMJ1 firmware and trying to flash to the newer firmware from other region N9005ZHUDMJ8.
However, I've been getting an error "ext4 img" in ODIN and now my phone cannot boot and stuck on the download mode. So I decided to flash it back to its previous version N9005XXUBMJ1 but still not success and stuck on the same loop.
I have tried doing the emergency recovery from KIES, but having another error "[about] Fused 2 > Binary 1" (on the following screenshot)
Can anybody help me on this problem? I really like the phone and I really need it back.
Thank you
I just solved the problem by myself, it seems that there is a problem with the bootloader on the MJ8 version or something, so I use the MJ6 BTU firmware instead and it works. phewww
Having the same problem...which firmware is MJ6 BTU?
TIA
SoKoOLz said:
I just solved the problem by myself, it seems that there is a problem with the bootloader on the MJ8 version or something, so I use the MJ6 BTU firmware instead and it works. phewww
Click to expand...
Click to collapse
I think MJ8 is from Hongkong 16GB Model.
Either way the knox warranty void has been triggered. You also have the new bootloader meaning recovery through Kies won't work until your country gets the new bootloader stock.. You are essentially stuck using another countries rom now until your coutry/carrier upgrades their firmware with the new bootloader...
Forget Kies recovery working if things go wrong...
doclucas said:
Having the same problem...which firmware is MJ6 BTU?
TIA
Click to expand...
Click to collapse
To answer my own question, this is the BTU (United Kingdom) firmware file that saved my otherwise bricked phone which got the MJ8 HK bootloader:
N9005XXUDMJ6_N9005OXADMJ4_BTU.zip
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
doclucas said:
To answer my own question, this is the BTU (United Kingdom) firmware file that saved my otherwise bricked phone which got the MJ8 HK bootloader:
N9005XXUDMJ6_N9005OXADMJ4_BTU.zip
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Click to expand...
Click to collapse
I currently have a hong kong model 16gb (MJ8) version.
is it possible to flash BTU onto this device?
jeezy85 said:
I currently have a hong kong model 16gb (MJ8) version.
is it possible to flash BTU onto this device?
Click to expand...
Click to collapse
It should be possible, but might fail, so in any case make sure you download both the latest Hong Kong firmware (MK1) and the MJ7 BTU firmware just in case it fails you can flash MK1 on top and your device supposed to work fine.
Hey
i flashed a couple of roms before so i decided to try the xnote rom but during in aroma installer its asking me to choose csc what is it?if i choose a wrong CSC can it lock or brick my device or something?thanks
Basically its your region. CSC NEE is nordic unlocked, BRI is Taiwan unlocked and DBT is German unlocked.
You wont brick it of course.
tcntad said:
Basically its your region. CSC NEE is nordic unlocked, BRI is Taiwan unlocked and DBT is German unlocked.
You wont brick it of course.
Click to expand...
Click to collapse
I am from israel that's why i don't know which one to choose...if i choose a wrong CSC can it make problems?
VodkaPlease said:
I am from israel that's why i don't know which one to choose...if i choose a wrong CSC can it make problems?
Click to expand...
Click to collapse
No it woudnt cause any issues. But you will recieve updates for another region than Israel.
tcntad said:
No it woudnt cause any issues. But you will recieve updates for another region than Israel.
Click to expand...
Click to collapse
thank you very much
Is CSC related to modem ?
Can I run a XXUEMKE modem with XXUBMGA CSC ?
I have galaxy s4 i9505 and after region changing my csc is ALB, i can't get updates. What can i do? It is multi-csc... Region SEB, but CSC ALB.
So I will not get updates?
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Meyhemg said:
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Click to expand...
Click to collapse
My CSC now is ALB, and i can't find this rom on samsung-updates.com
Before that the CSC was different?
Meyhemg said:
Before that the CSC was different?
Click to expand...
Click to collapse
Before was DTM
Vartotojas258 said:
Before was DTM
Click to expand...
Click to collapse
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Meyhemg said:
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Click to expand...
Click to collapse
I'm from lithuania, but when buy the phone csc was dtm.
Vartotojas258 said:
I'm from lithuania, but when buy the phone csc was dtm.
Click to expand...
Click to collapse
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Meyhemg said:
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Click to expand...
Click to collapse
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Vartotojas258 said:
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Click to expand...
Click to collapse
Yeah that's an option also.
Also, did you try factory reset after the installation? If not, do it. It sometimes helps, in my case it didn't help to change the CSC to DBT when I installed the German rom.
I hope Kitkat will arrive soon to our devices. I can't wait to see the improvements and how did they change the TW.