I have a issue when i format all i can no longer add Zips via usb normally the phone comes up on computer but storage size doesn't so nothing can be moved on. Can anyone help me i would really like to get off miui.
Your are on "davinci", not "raphael" XDA subforum.
Don't know exactly which TWRP version you use, but you may need to enable MTP toggle/option to be able to see your storage via USB.
just mount, if that not resolve then restart recovery and reconnect usb. happened to me aftet format data phone was detected, but atorage was unknown and not accessible
Related
Hey all,
I have downloaded the Windows 7 64 bit drivers for my Fascinate. Installed them...but when i go to mount my SD card I can see it in Windows Explorer but it says CD drive F: Verizon Mobile. I cannot see anything on my SD card at all. How can I get this mounted. I am rooted and I have USB debugging on. Any other ideas on how to get this to work.
Pull down the notification bar at the top of the phone. Press mount sd card. Your problem mabe deeper than this but I just thought best to start simple. If u still can't get it we need more info like is it DI01,DJ05, or DL09
Sent from my SCH-I500 using XDA App
No, I cannot mount that way. I am on dl09. Very frustrating.
Sent from my SCH-I500 using XDA App
I had the same issue. I flashed Adrynalyne's latest voodoo kernel 01/21 low voltage and it seemed fixed it for me. I'm running DL09 supah clean 04 also.
See here and go to Test 4 this maybe your issue.
http://forum.xda-developers.com/showthread.php?t=915709&highlight=cd-rom
This is the official response from Samsung:
"There is no SD card mount issue on Windows OS. After user connects USB cable, Windows OS will recognize the device as CD-Rom, and the ToolLauncher_Bootstrap.exe will be running by autorun function. (WinXP only, Win 7 user should run ToolLauncher_Bootstrap.exe by himself ). At this point either user can ignore the installation of TL and use mass storage directly, or wait 30 secs timeout and the device will be changed to mass storage.
Another option is that user can change the settings -> USB setting to 'Ask on connection' from mass storage(default). It will allow user to go to mass storage directly by selecting mass storage.
But The mass storage is not working on MAC OS from previous version, and We have a fix for that in FROYO release."
Hope this helps.
I have the same issue when using certain kernels not sure if it is in the kernel or not. the only way i am able to mount the sd or use pda net is to plug the phone into the comp and reboot the phone after the phone reboots the comp recognizes it. I know this is not a fix but it does work everytime and the phone is recognized until the next time i reboot my phone without it being plugged into comp. This is a temp fix until you can find a better fix.
I don't know what happened, but I can no longer mount the SD card via USB. I've spent half the afternoon trying to fix the drivers, and I end up in the exact same place I was before.
I'm running Windows 7 64-bit and CyanogenMod 6 RC2 on the phone. I have ADB set up and, to my knowledge, the drivers for it are working. ADB devices recognized my phone.
When I try to mount the SD card, the phone shows "USB storage in use," but it doesn't show up on my computer. Normally I get a little popup asking if I want to open the folder to view files. In Device Manager, it shows a little warning on USB Mass Storage Device which I believe is the phone. If I right-click and go to Properties, is says "This device cannot start. (Code10)" (see first thumbnail).
Here's the weird part: If I boot into recovery and select to mount the storage card, it will mount (see second thumbnail).
Can anyone help me? Thanks in advance.
Did you try it with a different card? Or this card in card reader? You have to rule out simple things first, like weird card corruption.
I've tried a different card. No difference.
I uninstalled all the drivers and restarted my computer. When I plugged the phone in, I got the following message. Something called MTP did not install successfully. Anyone know what to do about this?
Well, after numerous cycles of uninstalling and attempting to reinstall the drivers, I still had no idea what the problem was. I uninstalled all the drivers and ran a utility on my PC to clean and fix problems in the registry. I rebooted it and then plugged the phone in. It installed the drivers and now both ADB and USB storage work.
Strange thing is, I don't see an entry for Android ADB Interface in the device manager any more. I see Android USB Drivers and the USB Mass Storage though, so I guess that's all it needs.
ok i runing Oxygen and everithing is just fine,but i have one smaal problem: i can't use USB Mass storage mode.
Lets say the phone is turned absolutley off , when i turn it on and try to get in recovery mode the computer detects it and it shows it like CD Drive(empty), ok i tried some of the options of recovery- i mount/unmount, format , fix .. etc. still appear like CD Drive.
Ok i turned on the phone, and then i choose the android option to use the phone like USB flash drive, again it appeared like CD Drive , wich automaticly means only read but not write on memory card, and now every time i have to remove the card from the phone put it in SD card reader and upload on it some music, photos etc ...
Anyone with a solution?
1) First try another sd-card to see if the sd-card has a problem.
2) Either your ROM has a problem or it is your computer. Please try it again with another computer just to make sure that yours is not the cause for this behaviour.
3) If the problem persists try flashing your ROM again, but in recovery mode: Choose Wipe Data /Factory Reset, then go back to main menu. Choose Wipe Cache Partition, then go back to main menu. Go to Advanced and choose Wipe Dalvik Cache, then go back to main menu. This will delete all the data on the phone and make sure the ROM is installed properly.
Oxygen ROM do not allow to use Internal memory in usb mode, but sd card works 100% tested.
the worst thing for me is that, when im in recovery again appear like cd drive, so the phone for the computer from the begining is cd drive.
when i go in device manager it shows that HSUSB driver is not installed properly is it the same for you guys?
it only shows that my device is android usb device, but not mass stotage
THE same problem
stan40 said:
ok i runing Oxygen and everithing is just fine,but i have one smaal problem: i can't use USB Mass storage mode.
Lets say the phone is turned absolutley off , when i turn it on and try to get in recovery mode the computer detects it and it shows it like CD Drive(empty), ok i tried some of the options of recovery- i mount/unmount, format , fix .. etc. still appear like CD Drive.
Ok i turned on the phone, and then i choose the android option to use the phone like USB flash drive, again it appeared like CD Drive , wich automaticly means only read but not write on memory card, and now every time i have to remove the card from the phone put it in SD card reader and upload on it some music, photos etc ...
Anyone with a solution?
Click to expand...
Click to collapse
THE same problem! How can you deal with it?
This thread is old...
Sent from my GT-P1000 using Tapatalk 2
The god dam windows and drivers was the problem. Actualy i have a huawei USB modem for internet, and the drivers which i used for the modem messed with the drivers for the phone. The solution was to remove the USB Modem drivers and then reinstall them again and this time the computer discover the phone like mass storage.
I really need help, I think I screwed up a lot.
I've tried to flash a different ROM, but did not think that it was good.
So here is my big mistake, i have wiped it all away, also my backup, the only thing i can start up is TWRP v2.7.0.0.
I cant flash because i did not enable USB DEBUGGING before Wipe.
So i bought an OTG cable, but when i try to connect it, it wont mount..
Is there anything i can do, is there anyone that can help me.:crying:
My Phone is a LG G2 D802 without SD card slot..
KR
CooLPoT
Usb otg is for flash disks
take a flash disk (usb drive), format it @ FAT32
copy over your rom and flash it.
Or simply connect the device to the computer and push via
"adb push rom.zip /sdcard/rom.zip"
also usb debugging off/on is only for android (which is alive).
Feel free to ask.
bender_007 said:
Usb otg is for flash disks
take a flash disk (usb drive), format it @ FAT32
copy over your rom and flash it.
Or simply connect the device to the computer and push via
"adb push rom.zip /sdcard/rom.zip"
also usb debugging off/on is only for android (which is alive).
Feel free to ask.
Click to expand...
Click to collapse
Thanks for answer.
The problem is that when i connect a USB flash drive, it wont mount it.
And when i try to connect my phone to my PC through with ADB i cant see it, not even inside Device Manager, and i have installed ADB drivers many different ones in hope to make it work.
When i use my girlfriends phone that are the same model, then it works.
I have been reading that the PC can not see the Phone with out USB DEBUGGING activated.
But i do believe that with the right command inside TERMINAL of TWRP i can activate USB DEBUGGING.
try formatting into fat32 - the usb
I am not able to transfer files using USB cable on my MI A1. Everytime I connect my phone with PC using cable I get a notification "Not able to detect usb device and driver cannot be installed".Everytime I connect the phone with PC using usb cable it works as a charger.Even I change the option to "file tranfer" in developer option still it i was not able to transfer files or pics.plz help
I'm facing this problem too im on Official HavocOS V2.0 android pie I did try to mount in TWRP but not respond while decrypting in TWRP it says unable to mount storege something like that have all driver installed I got access one time storege in TWRP accidentally switching slot when my OS is installed in slot b and I just switched to slot a after then I'm unable to do this again tried everything format storege clean install in different slot but no luck what OS you have installed ? If get solved the issue please put the "solved" word in the title of thread it helps more peoples.