What is the use of Select Radio Bands?
It is used to select the network type: 2g, 3g, 4g, lte. However this method is advanced since it locks it to the selected network. When the band is unavailable, your phone wont have any network. unless you change it via the normal settings.
It is good during erratic network(fluctuation) to 'lock' to any band and save battery... But you may not be able to receive calls if your phone is locked to 4G, Lte bands.
P.S. In Stock ROMS dialling this code does not always work. I dont know about custom roms, lucky if it works
Xrobot said:
It is used to select the network type: 2g, 3g, 4g, lte. However this method is advanced since it locks it to the selected network. When the band is unavailable, your phone wont have any network. unless you change it via the normal settings.
It is good during erratic network(fluctuation) to 'lock' to any band and save battery... But you may not be able to receive calls if your phone is locked to 4G, Lte bands.
P.S. In Stock ROMS dialling this code does not always work. I dont know about custom roms, lucky if it works
Click to expand...
Click to collapse
I think you meant Preferred Network Type? Well I'm not talking about the same. Let me show you the screenshot.
Any ideas anyone?
Saya mau memulihkan band radio, karena pas saya mau kunci sinyal 4 hilang
Saya mau pulih band radio, karena pas saya mau sinyal 4 hilang
Related
I am a noob to the world of android phones (as an owner) however I have an android tablet. Currently i am warming up to android so i purchased a Samsung Galaxy Y. I am currently in Jamaica and the provider I had purchased the phone from is a 2g, 4g provider knowing i could not legitimately get 4G I was given a 4G none the less but my phone would say H during data transfers, I have never tested the speed though. My internal memory was full and after hours and days of trying link2SD and other programs to create a psedo-extended internal drive i decided to try Creeds rom V4 however it was a memory hog and i decided to try another ROM, this caused my phone to "brick" i was able to unbrick itexcept now i am seeing E for my data transfers instead of H. I have no HSPA menu since noticing that i have tried several other ROMs and stock OS however none gave me back the H please help :'(
*#*#4636#*#* push Phone Information and push WCDMA Preferred on the drop down.
help me its now working
MrObvious said:
*#*#4636#*#* push Phone Information and push WCDMA Preferred on the drop down.
Click to expand...
Click to collapse
WCDMA prefered was the first thing selected on the drop down
You must have a 3G/4G mobile compatible device such as a smartphone, BlackBerry, tablet or dongle and a Digicel SIM to access Digicel 4G Mobile.
Our 4G network supports any device with the 850MHz band. Any such 3G, 4G, HSPA, HSDPA and HSPA+ capable device can enjoy the fastest download, upload and browsing speeds available on Digicel 4G Mobile.
Change your phone settings for 4G:
Customers must ensure that the device settings are properly set up to connect to 4G Mobile.
Here is how to change your phone Network Settings:
STEP 1 - Device Settings:
· 4G Phones/Smartphones: Adjust your phone network settings in “Network Settings” or “Network Connection” to 3G & 2G, 4G & 2G, GSM/WCDMA or dual mode depending on your phone type.
· BlackBerry Smartphones: Adjust your phone network settings in “Manage Connections” or “Mobile Network Option” to 3G & 2G or 4G & 2G depending on your phone type.
STEP 2 - Remove and replace the phone battery or power off and on your phone.
STEP 3 - Once you have successfully connected to 4G Mobile the icon on your home screen should successfully change to 3G+, 4G, H, H+, HSPA+ etc. The icon displayed is dependent on the device model. The icon will change if you are in a 4G coverage area.
Taken from my mobile provider's website
i mean its no working
I tried searching however could not find anything. Perhaps I may be using the wrong wording.
What I am trying to accomplish is to disable the GSM mode. What I find is the phone likes to jump to the GSM network and with that the internet connection just doesn't move at all. If I force the phone to WCDMA mode it work just fine standing in the same spot, so the phone is still picking GSM over WCDMA even when there is a good signal for WCDMA.
Current modes:
LTE/WCDMA/GSM (auto connect)
WCDMA/GSM (auto connect)
WCDMA Only
GMS only
Is it possible to have a LTE/WCDMA option?
MrDerrickC said:
I tried searching however could not find anything. Perhaps I may be using the wrong wording.
What I am trying to accomplish is to disable the GSM mode. What I find is the phone likes to jump to the GSM network and with that the internet connection just doesn't move at all. If I force the phone to WCDMA mode it work just fine standing in the same spot, so the phone is still picking GSM over WCDMA even when there is a good signal for WCDMA.
Current modes:
LTE/WCDMA/GSM (auto connect)
WCDMA/GSM (auto connect)
WCDMA Only
GMS only
Is it possible to have a LTE/WCDMA option?
Click to expand...
Click to collapse
I miss this option. The Xperia Z had this mode, I loved it. It was reachable via the common code *#*#4636#*#*. But this code doesn't work on the GT-I9505 with stock Samsung ROMs. But even with custom ROM, and working code. This special mode is missing. There are 2 switches for "LTE only" and "WCDMA only" but not both
Try this:
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher&hl=de
MrSpiceGuy said:
Try this:
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher&hl=de
Click to expand...
Click to collapse
App doesn't seem to work, when I hit "Select Radio Band" it comes up with "Set GSM/UMTS Band" and nothing else.
MrDerrickC said:
App doesn't seem to work, when I hit "Select Radio Band" it comes up with "Set GSM/UMTS Band" and nothing else.
Click to expand...
Click to collapse
You have to use "prefered network type" as seen here
https://lh5.ggpht.com/y1CQbSg9Wf8J3q3klA3GNi_IgVtluML2jwhW38ldPpExSPTQ_SEu6iWJa3kRNaiSfcg
This should work
Here is my screenshot. It only has "LTE/CDMA", which only allows me to use LTE. There is no "LTE/WCDMA" option.
Perhaps, this might be an idea for rom creators?
also interested in this.
yes, please add this function LTE/WCDMA only into ROM CYANOGENMOD.
because LTE/GSM auto (PRL) connect to 2G/3G/4G, and i'm not interested for 2G.
Did anyone ever find a solution to this?
fergietime said:
Did anyone ever find a solution to this?
Click to expand...
Click to collapse
Solution please ! I have the same problem also
True. I am able to use the following:
LTE/GSM (prl)
WCDMA (prl)
GSM Only (prl)
I am unable to use LTE/WCDMA/GSM
I am using XXUGNG8 modem, and I am unable to use 2G (network won't connect).
3G works in most cases, but it is still dropping. Only technology which works correctly is LTE...stable and fast.
I am unable to switch the network band to any other one. I tried it with service menu tool, but it does not work either (allows me to change to defined items above, and reverts back to LTE/GSM if I'll select anything else).
Is there a way to add support for more network modes? I am confident that my issues are not related to HW, as both bootloader, GSM modem and LTE modem are all of the same version - XXUGNG8, and I do have very good reception for whole band. I am just unable to switch over to 2G, and 3G is still dropping.
I live in Prague, Czech Republic, and I own GT-9505i variant
Any solutions guys?
any solution to this date? im interested in the same thing.
I finally found a solution that works on my Samsung Galaxy S5. Enter code *#2263# into your dialer. An option menu will open with "LTE/WCDMA Mode" only as an option. Works like a charm!
Wrong posted.
Hi,
Sorry to bump this but I have the same issue. I have a Galaxy S4 and it is very weird with its network selection.
The default setting is LTE/GSM auto, which I believe is LTE combined with the GSM Auto mode that everyone knows about - this being, prefer 2G instead of 3G in weak signal areas.
I have the following options:
LTE Only
LTE/GSM Auto
GSM Auto
WCDMA Only
GSM Only
WCDMA Preferred
Plus a load of other stuff about CDMA and EvDo (I'm sure that the GT-I9505 doesn't support CDMA or EvDo?).
The problem I am having is as follows:
Immediately when I got the S4, I realized that it was preferring GSM over WCDMA/HSPA. This was confirmed when compared with a Samsung Galaxy Ace Plus, on the same network, in the same location, and the Ace Plus (S7500) was choosing 3G, whilst the S4 chose 2G. Doing a bit of Googling led me to find the WCDMA setting, and after choosing that, the S4 chose 3G.
So all was good for the last 2 years, using WCDMA Only mode on my S4, as my mobile operator (Virgin Mobile) didn't have 4G access. Losing LTE wasn't a problem.
However, now I have switched to the EE network, I now face a problem. As mentioned above, there is the WCDMA Only mode, and the LTE Only mode - meaning that I am unable to have both 3G (WCDMA) and 4G (LTE) without also having GSM, and there is no way that I want to ever use GSM again, especially since that EDGE/GPRS are barely usable as data connections, GSM has sub-standard voice quality, and the S4 is choosing GSM over WCDMA.
A couple of examples, once on my way home, the S4 dropped from 4G to 2G and completely ignored 3G - despite being right next to a 3G mast operated by EE (albeit on the old Orange code). On WCDMA mode, the phone always connects to the Orange 3G mast. Thankfully, a bit later on, it did pick up 4G again, but if I was streaming Tunein Radio, that would have been a disaster (it would have dropped the stream).
A bit later on, on the same journey, the phone also went to 2G, from 4G - despite being in a reasonable signal area for 3G. Why didn't the phone choose 3G? I'd had enough by then and switched to WCDMA Only mode; result? 28% 3G signal (3 bars)!
It's also happened on my local mast, until a few weeks ago. The S4 was choosing 4G from a more distant mast (strength 50%), instead of 3G from the local mast (strength 60%). When I went downstairs, to the kitchen, the signal strength dropped and the phone went straight to GPRS! GPRS is likely to give about 30kbps max, so I don't know why the phone was doing this - although about 20-30 seconds later, it did then go to the 3G from the local mast.
I can't use LTE Only mode as (a) the 4G rollout isn't complete, and (b) the S4 does not support Voice Over LTE (VOLTE), meaning that in 4G only mode, I have no way of accepting or receiving calls.
I need a 3G/4G mode (LTE/WCDMA) on my S4, that doesn't use 2G at all, because 3G/4G signals are present virtually everywhere on the EE network, and it would stop the S4's crazy behavior.
Any suggestions to remedy this would be appreciated. I am not rooted, though if someone knew how to root the phone for me, it could be a possibility, as it is out of warranty.
Hi I have a L720 and made him sprint sim unlock, I'm using it in Argentina with the "claro" position the company APN and it works, sign up both 2G and 3G and the mobile internet works fine. however my question is this, in the menu of this phone does not let me change mode, GSM / UMTS network can not choose one or the other, I can only make it automatic, it is not a stock ROM that lets me choose 2G or 3G. can this be changed? or stays like this forever? I need to use that in my area 2G 3G works very poorly and do not come calling me ..
from already thank you very much.
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
I have a Nokia X6. I put two SIMs into it, both show 4G.
I have some problem to connect data or mobile internet. Grammen phone provider.
I was ready to purchase one, however, was curious if this would work on t-mobile. If so, would the Wi-Fi calling work?
Did you already checked if your 4g network band compatible with your phone?
Gin.Or.Juice said:
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
Click to expand...
Click to collapse
Android One TA-1099 or TA-1103?
For TA-1099
Network 900MHz, 1800MHz, 850MHz, 1900MHz, 800MHz, 2GHz, Band 38, Band 39, Band 40, Band 41 (2555-2575 MHZ, 2575-2635 MHZ, 2635-2655 MHZ), Band 1, Band 3, 1.9GHz, I , II, V, VIII
Data Service LTE Cat. 4, 150Mbps DL/50Mbps UL
Could someone upload the bands for this phone? I'm not sure about get it, I need to know if TA-1103 have the LTE B4, in some sites said yes and other no.
brunonemer said:
Could someone upload the bands for this phone? I'm not sure about get it, I need to know if TA-1103 have the LTE B4, in some sites said yes and other no.
Click to expand...
Click to collapse
TA-1103 LTE Band 1, 3, 5, 7, 8, 28, 34, 38, 39, 40, 41
https://imgur.com/a/SqSj1Tg
https://imgur.com/a/oDBAiOe
https://imgur.com/a/QAnFBVG
https://imgur.com/a/glcUhMc
https://imgur.com/a/SXYMKfM
Gin.Or.Juice said:
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
Click to expand...
Click to collapse
So, have you solved your problem?
If the ROM of your phone is "CN" you could try to flash the phone to the global ROM 2_29(WW) or wait for a new update of the firmware. You haven't noticed the firmware's version. Have the phone got any updates?
I just returned the phone and got an LG G7 instead. The X6 that I was using also had a problem with Bluetooth as I was never able to turn it on.
Manually switch the preferred network type.
I am using the latest Stock Android version on Nokia 8 and struggled with this issue too. I tried everything I could possibly do.
The simplest answer is to go into network settings and select 2G, give it a minute to find it. Do it for 3G too. Give it a minute to find it. Then 4G, same thing. Finally select 4G as preferred network type and that should do it.
It looks like the default preferred network type is 3G from the factory.
guys i cant even access my mobile data connection can anyone tell how access it
thanks
By salah
hello!
I am trying to set my network mode to WCDMA because I want to use data and receive calls on the same time since my carrier hasn't enabled VoLTE (that's another story...) but I can't!
The option is there, settings, more, Mobile networks, network mode, i make the change to "GSM/WDSMA auto" but it won't stick! If I go back and come again to this menu, the option is reverted back to "GSM/WDSMA/LTE auto"!
There is no luck either with the LG hidden menu, *#546368#*870# , it says "Connection problem or invalid MMI code".
Could this has to do with my modded kernel?
Any other ideas?
Here is my setup right now:
LG G6 H870
Android 7 Nougat V11i-EUR-XX
Melina kernel 3.18.62-melina-rel7_2017.12.31_uber-6.x_STOCK_zefie
Thank you in advance for your help!
That is a GSM phone. You cannot simply switch to CDMA. Different hardware.
patruns said:
That is a GSM phone. You cannot simply switch to CDMA. Different hardware.
Click to expand...
Click to collapse
what?
If i know that correct, WCDMA = 3g, right?
I want my device to be locked to 3g only, not 4g, because when I receive a call, it drops from 4g to 3g and I lose my internet connection, which is really frustrating if you are in the middle of a video call!