Hello,
wondering if anyone else has seen this. I turn on the phone into recovery mode, select "reboot to bootloader", hit power button, but it just reboots into normal mode. It won't do engineering mode either. I power off, then press volume down + power buttons, it boots into Factory Test Mode, which is useless. I give it commands over ADB from my computer, using a command line, or using that ADBTools GUI, the phone responds correctly to commands like "adb shell" and "adb devices", but will not boot into bootloader mode. No response to "fastboot devices". I tried every way known to man, but no bootloader mode, no way to root.
i found the software/files by Zachary Pidgeon, but they're not available anymore.
can't think of any other ways to do it.
Related
Ok I've Openswift 2.2.1 not the newest version, but I can't boot into fastboot when I try the POWER+CAMERA combination it just boots up as normal. Are there other combinations to boot into fastboot?
vol up + camera + power
but i think its only workin because camera + power..
I have the same problem.
Sent from my GT540 using XDA App
Same problem..
If i press the camera button very hard it doesn't load normally the screen just stays black but when i type "adb devices" it doesn't show anything.
tatail said:
Same problem..
If i press the camera button very hard it doesn't load normally the screen just stays black but when i type "adb devices" it doesn't show anything.
Click to expand...
Click to collapse
You are in fastboot, instead of "adb devices" use "fastboot devices" and you should see an "?", that means your in fastboot mode.
Seems to work if you press CAMERA first, then POWER and hold them both.
Hi, I have a problem similar, my gt540 dosent recognize my sd card but when i try to put code "fastboot oem enableqxdm 0" to try to enable it show "..." and nothing happend. What i´m doing wrong?
Yesterday, while watching a youtube video, my redmi 3s prime switched off on itself and entered bootloop. I switched mobile to recovery mode and entered fastboot while connecting android with pc, I thereafter launched command prompt and entered "adb devices" but no devices were displayed, then I typed "fastboot oem edl" but again I received message "failed...:device is locked, oem edl is not allowed", the to bypass bootloop so that I can enable oem in developers option I tried "fastboot continue" and then although homescreen was entered but message was displayed saying:"The process system is not responding" and eventually screen hanged with capacitative buttons not responding and the only go is to enter recovery again. I thus need help to enable oem so that I can flash stock rom as in Miflash device port i.e COM10 is not being displayed rather random number alongwith alphabets is displayed. I have posted photo to show device error.
Garu8 said:
Yesterday, while watching a youtube video, my redmi 3s prime switched off on itself and entered bootloop. I switched mobile to recovery mode and entered fastboot while connecting android with pc, I thereafter launched command prompt and entered "adb devices" but no devices were displayed, then I typed "fastboot oem edl" but again I received message "failed...:device is locked, oem edl is not allowed", the to bypass bootloop so that I can enable oem in developers option I tried "fastboot continue" and then although homescreen was entered but message was displayed saying:"The process system is not responding" and eventually screen hanged with capacitative buttons not responding and the only go is to enter recovery again. I thus need help to enable oem so that I can flash stock rom as in Miflash device port i.e COM10 is not being displayed rather random number alongwith alphabets is displayed. I have posted photo to show device error.
Click to expand...
Click to collapse
I have an idea, which I didn't try myself.
You could try to enter the recovery by holding volume + und power, long until it will show the first recovery screen
It has orange text boxes, and one of those is saying "recovery" tap it
Probably then, if chinese text appears, you will have to translate it using another phone and google translate
app by camera scan.
If that all would theoretically work, try wipe cache and dalvic or a factory reset (you would then loose all ur data)
In worst case you have to do a deepflash as descibed here:
http://forum.xda-developers.com/showpost.php?p=69782123&postcount=7
Garu8 said:
Yesterday, while watching a youtube video, my redmi 3s prime switched off on itself and entered bootloop. I switched mobile to recovery mode and entered fastboot while connecting android with pc, I thereafter launched command prompt and entered "adb devices" but no devices were displayed, then I typed "fastboot oem edl" but again I received message "failed...:device is locked, oem edl is not allowed", the to bypass bootloop so that I can enable oem in developers option I tried "fastboot continue" and then although homescreen was entered but message was displayed saying:"The process system is not responding" and eventually screen hanged with capacitative buttons not responding and the only go is to enter recovery again. I thus need help to enable oem so that I can flash stock rom as in Miflash device port i.e COM10 is not being displayed rather random number alongwith alphabets is displayed. I have posted photo to show device error.
Click to expand...
Click to collapse
If you can go to the settings then try to make factory reset. If not then try vol up +power and then select download mode.. If it is not working then switch off your device and connect to pc and the same time when you plugged it into pc just hold the vol up and down together this will take you on download mode.. If this is not working then try to make drep flash cable or request xiaomi to unlock bootloader permission..
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
I have Moto G4 Plus and its power button broke. Now the battery is dead and I am not able to switch it on even with a pointed object. I searched the net and found a way to enter recovery mode. I pressed the Volume down button and immediately plugged in the charger. Now I managed to enter the recovery mode but still, I need the power button to switch it on.
I found another way, but still, it did not work. I installed ADB Fastboot and opened the command window. I remember that I had even tried to root my phone so USB debugging was enabled. But this ADB command window does not detect the phone, even on typing "adb devices". How do Switch on the phone?
grishi99 said:
I have Moto G4 Plus and its power button broke. Now the battery is dead and I am not able to switch it on even with a pointed object. I searched the net and found a way to enter recovery mode. I pressed the Volume down button and immediately plugged in the charger. Now I managed to enter the recovery mode but still, I need the power button to switch it on.
I found another way, but still, it did not work. I installed ADB Fastboot and opened the command window. I remember that I had even tried to root my phone so USB debugging was enabled. But this ADB command window does not detect the phone, even on typing "adb devices". How do Switch on the phone?
Click to expand...
Click to collapse
I tried with both (vol -) and (vol +) and it went into bootloader.
Try it, Then use command: fastboot reboot
( add "m" if you use mfastboot)
keep vol- pressed then plug an usb cable. leave the vol- in bootloader mode.
then just press power button to start
LG G6 H871 unrooted
I just can't get into fastboot or recovery mode. I've tried everything on the internet.
I've tried turning off the phone. Holding down the volume down button and then plugging in the USB cable.
I've tried adb command "adb reboot bootloader" which just reboots the phone until I can see the "enter your PIN" screen
The closest I got to the recovery mode was using "adb reboot recovery" which gave me the "no command" screen.
Any tips on this?
Have you enabled OEM Unlock option under Developer settings?
Yes. "Enable OEM unlock" and "USB debugging" enabled.
both oem unlock is on and usb debugging on and my computer has accepted the fingerprint from teh device to shake with adb. . still cant get into fastboot mode.what to do.
Is your phone rooted? If so use flashify to reflash recovery. You do know that if you want to boot in recover you have to let the power key go and repress it once your screen goes on right?
You can also try phone off. Holding volume up while you insert usb cable. Might be a tool that allows a command to be send to reboot it in fastboot mode? If not downgrade its firmware..
ErlendAnderson said:
LG G6 H871 unrooted
I just can't get into fastboot or recovery mode. I've tried everything on the internet.
I've tried turning off the phone. Holding down the volume down button and then plugging in the USB cable.
I've tried adb command "adb reboot bootloader" which just reboots the phone until I can see the "enter your PIN" screen
The closest I got to the recovery mode was using "adb reboot recovery" which gave me the "no command" screen.
Any tips on this?
Click to expand...
Click to collapse
If I understand correctly, when you got to the No Command" screen, you were actually in Recovery. From my experience, the No Command screen is like a "greeting", if you will. Once you see that screen, you need to fiddle with the power & volume buttons. I believe the correct combination is to press and hold the power button. Then press and release the volume up button but continue to hold power button. If that is not the correct sequence you will need to Google for the correct order. Reference.
Considering that you are not rooted, there is not much you can do in the stock recovery.
EDIT 2 - Realized that this thread is over a year old and the OP has probably moved on. Didn't realize another member revived it. Sorry.
My Oneplus 8 Pro is cycling through the bootloader options as if I am holding the volume up button. I tried MSM tool back to stock to try to fix the problem but it keeps happening. If anybody knows a fix for this issue please let me know! Thank you!
Edit: I discovered this while trying to install Evolution X 7.1 ROM and got stuck in the bootloader
I am having a similar issue with my Oneplus 8, were you able to find a fix for this?
My Op8 pro have the same issue, but fastboot commands are working so i just write command fastboot reboot bootloader.
It reboots to the same screen with "Start", and i can select with vol down/up options, but sometimes vol up still gives weird response like it will be holding still and cycles through all options. Mostly fastboot reboot bootloader in my case solves the problem, and fastboot mode have proper response to keys.
Second question is: why do you need not shuffling bootloader? To select option? If yes, then you can select most of the options through commands (even if options are switching like crazy) like:
fastboot reboot recovery
fastboot reboot bootloader
fastboot reboot
and there's moooore and more options ^_^
Show barcode have no command from what i know.
I got around that by unplugging the phone before you boot to fastboot. It seems to work fine when it is not plugged in your computer.