Database Users

Service provider update restart to configure features ?

After i installed a exposed module called Xtouchwiz for the AT&T model and i restarted my phone this keeps popping up on my screen " Service Provider update , Your device will restart to configure features supported by the new sim card" but no sim card is added ? How can i change this ?

I too, am getting this message, but only when my SIM is inserted. It reboots into recovery....

you have to unroot and restore the device to the stock version

Raz12 said:
After i installed a exposed module called Xtouchwiz for the AT&T model and i restarted my phone this keeps popping up on my screen " Service Provider update , Your device will restart to configure features supported by the new sim card" but no sim card is added ? How can i change this ?
Click to expand...
Click to collapse
Hi @Raz12 and @rodin95.
I have also got this problem after flashing the G930U firmware and later inserting my SIm card. I have also just installed Exposed, so not sure if this could be the cause. Did either of you have any success solving the issue?

ghter said:
Hi @Raz12 and @rodin95.
I have also got this problem after flashing the G930U firmware and later inserting my SIm card. I have also just installed Exposed, so not sure if this could be the cause. Did either of you have any success solving the issue?
Click to expand...
Click to collapse
Well sadly i just had to restore everything back in odin and not install that xposed module. I'm scared to install anything xposed until it's a easier way to flash without restarting over.

@ghter - As @Raz12 mentioned, I had to do the same thing and restore everything back and not install xposed.

are you guys using the ATT or Unlocked Samsung versions of the S7/S7 Edge? i'm on ATT using a S7 Edge DUOS with the XTouchWiz installed and have not received any message about updates. Thanks

I am having the same issue. I uninstalled xposed and all the modules and cleared cache and I am still getting the notification. I removed the sim so I can kinda use the phone. Is the only way to fix it is to reinstall firmware?

cortez.i said:
are you guys using the ATT or Unlocked Samsung versions of the S7/S7 Edge? i'm on ATT using a S7 Edge DUOS with the XTouchWiz installed and have not received any message about updates. Thanks
Click to expand...
Click to collapse
I'm using the Galaxy s7 edge ATT that wasn't unlocked. 935A

GartimusPrime said:
I am having the same issue. I uninstalled xposed and all the modules and cleared cache and I am still getting the notification. I removed the sim so I can kinda use the phone. Is the only way to fix it is to reinstall firmware?
Click to expand...
Click to collapse
basically :|

YOU DO NOT HAVE TO FACTORY RESET!!
My phone is a Galaxy S7 running the G930U Firmware on Verizon. I also received this warning after installing XTouchWiz. I was unable to use my phone as each time it booted up, it would greet me with the the following message:
"SERVICE PROVIDER UPDATE - Your device will restart to configure features supported by the new SIM card"
....even though I had not installed a new SIM card. Anyways, this is how I was able to regain access to my phone after this nuisance:
Just enter adb shell, and enter the following commands:
adb shell
su
pm list packages -e | grep 'AutoPreconfig'
pm disable com.sec.android.AutoPreconfig
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

After that, you may wish to go to the following directory and delete the actual apk:
/system/priv-app/AutoPreconfig/
Find the AutoPreconfig.apk package and either delete it, or just rename it to something your Android doesn't recognize. The advantage to renaming it is that if for some reason you do end up needing it, you still have the file and you can just rename it back to stock.

Wired4Fun said:
After that, you may wish to go to the following directory and delete the actual apk:
/system/priv-app/AutoPreconfig/
Find the AutoPreconfig.apk package and either delete it, or just rename it to something your Android doesn't recognize. The advantage to renaming it is that if for some reason you do end up needing it, you still have the file and you can just rename it back to stock.
Click to expand...
Click to collapse
Thank you so much! I couldnt get the first part to work so i just took out the sim and deleted the app

Wired4Fun said:
After that, you may wish to go to the following directory and delete the actual apk:
/system/priv-app/AutoPreconfig/
Find the AutoPreconfig.apk package and either delete it, or just rename it to something your Android doesn't recognize. The advantage to renaming it is that if for some reason you do end up needing it, you still have the file and you can just rename it back to stock.
Click to expand...
Click to collapse
Thank you!!!! You saved me! I restored everything from my backup after flashing a new ROM on my s7 edge and couldn't figure out why the message kept popping up. I deleted the apk and it's gone!!!

patstar5 said:
Thank you!!!! You saved me! I restored everything from my backup after flashing a new ROM on my s7 edge and couldn't figure out why the message kept popping up. I deleted the apk and it's gone!!!
Click to expand...
Click to collapse
Glad I could help. I remember how incredibly frustrating that was when it happened to me. Glad to hear you're back up and running again.

Sorry to resurrect, but I thought it worth noting that you can freeze AutoPreConfig app with Titanium Backup.

I upgraded from version Q10 to version S05. First stockRom and then I installed rom s05 and magisk 25.2, everything is working wonderfully. I'm having difficulties installing Xposed Edge Pro 7.01. When starting it, the message appears that the module is not active. I installed Lsposed and managed to activate it within Lsposed but when running Xposed Edge Pro 7.01 it still appears that the module is not active yet. Which is to enable it within the xposed installer. I INSTALLED riru-v26.1.6.r527.cdcb9f34c6-release.zip and MAGISK 25.2 shows me that the Riru module is suspended because Zygisk is active. I also don't know if Riru is necessary to be installed and activated to Xposed Edge Pro 7.01 work. Could anyone help me how I can make Xposed Edge Pro 7.01 work on this ROMS05? I'd like also to install and Active the Riru module in Magisk because many modules need of Riru.

Downgrade Always On Display for more themes !

ROOT is required (Only for android 6 marshmallow )
I have a galaxy A7 2017 , and the Always On Display is good , but not enough... it only contain 2 clock themes and 1 calendar theme.
The S7 contain 11 clock themes and 2 calendar themes.
The A series 2017 come with AOD(always on display) version 1.7.85 , so if you downgrade AOD to version 1.7.34 you will get additional themes and customization !
Instructions:
•Download App Downgrader (ROOT) by Dev-Alex193a from the play store .
•Download AOD 1.7.34 apk from Apkmirror and put it in your internal storage .
•Open App Downgrader and grant Root .
•Select AOD 1.7.34 apk from internal storage (if you are android 6+ Allow App downgrader to access storage in app permission).
•Click Downgrade and wait between 15 seconds and 1 minute.
If you get a blue check mark that means it worked. :victory:
If the app is still loading after 1 minute, exit the app and try again,
And if it didn't work again that means you can't downgrade (sorry)...
Pros :
* 11 clock themes and 2 calendar themes !
* 3rd party notification is working .
Cons :
*After every reboot the AOD will upgrade automatically (restoring to the original version)
You have to re-Downgrade on every Reboot.(if you find any solution to this problem please tell me).
*Double tapping on notifications on AOD won't open the app.
This is my first post on xda, so sorry if i did anything wrong .
I can't post the links for the apps because xda rules : "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"

Interesting, hope samsung will bring more themes with official 7 update...

I cannot believe Samsung so severely gimped this feature in an update. Thank you so much for the tip! It worked without a hitch, and my AOD looks so much more beautiful now.

Thank you so much!!!

I don't have a rooted phone but do you know if it's being updated through the Galaxy apps app? If so you can open Galaxy Apps, tap the three dots, Open Settings and select never auto update. The other way is to disable Galaxy apps altogether using BK Disabler or uninstall it.

can you install themes on the aod with this method ????

I found a way to not have to reinstall after reboot. Just follow the steps above only uninstall always on display before downgrading it. You need an system app uninstaller for this

The reason why aod has to be reinstalled on every boot, is because when you downgrade the app, it becomes a user app and not a system app. so to fix this, just use any tool that can make any user app a system app to make aod a system app, and then you won't have to reinstall aod on every boot.

Mohamed R 96 said:
any screenshot ?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks

Thank but this make a the A OD useless, without double tap to change music etc...

I have an a5 2017. Iam on rooted stock. Iv changed with root explorer AOD apk from system with AOD from apkmirror and gave it permissions and it works, no downgranding ,and it stays after restarting the phone.
No doubletapp on notiff.

kubura2999 said:
I have an a5 2017. Iam on rooted stock. Iv changed with root explorer AOD apk from system with AOD from apkmirror and gave it permissions and it works, no downgranding ,and it stays after restarting the phone.
No doubletapp on notiff.
Click to expand...
Click to collapse
can you give some intructions how we do that?

nekos95 said:
can you give some intructions how we do that?
Click to expand...
Click to collapse
as said,double tap on notifications,sadly not working.
if someone could find a solution on this,or maybe port S8 AOD for Galaxy Alpha would be awesome!
@nekos95
open a root explorer and go to system/priv-app/AOD service(back up this folder
just in case you want to revert) and delete AOD apk and then replace it with the one you downloaded from APK Mirror.
give the right permissions if needed 0644(check the three vertical boxes below READ and the first box below WRITE.
reboot and your done.if you want to revert back copy your backup file in system/priv-app again and reboot.

Thanks <33

Just updated to OOS 9.0.3 I need help now...

As the title says, I just updated to OOS 9.0.3 and it's so different from the old one i'm really scared to try anything and risk to brick the phone...
I have several problems with the phone (nothing too scary thankfully) and I was thinking some of you could help here.
1) Nova Launcher isn't working properly. When I try to see the apps menu (where all the apps icons are displayed) it just doesn't show up, instead i just see the background and the apps can be seen just a bit in the upper part.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, I can touch the screen and the apps open where the icons should be... I tried to update nova, but the apk gives me the "app not installed" error and I'm not sure why.
2) Not rooted. I want to root the phone. I had it rooted before the update, but considering the last time i tried to root the phone without looking exactly what to do all my memory got wiped, I need to know exactly how to install Magisk and TWRP without bricking the phone or deleting anything... I have a method already that works, but I'm not sure with this now.
3) Is it possible to change the "recent app" orientation to vertical instead of horizontal? Also, is there an easier way to lock and unlock a recent app?
4) Is there a way to link Do Not Disturb to the slider?
5) Xposed is not installed. To be honest I forgot how to install that one, has it changed with this new OS update?
I might have more questions, but that's all for now, I updated like an hour ago, so I haven't been able to try it out more
thank you

Alright, I can try to help with some of your issues, but not all.
Don't worry about the new stuff, you'll get used to it quickly. Some things are still a bit "under development", but mostly is very usable. You'll not break anything and as long as you can boot into fastboot, your phone will be alright.
I cannot help with Nova launcher, I'm not using it.
If you have your bootloader unlocked, then just flash the newest Magisk zip, and you're good to go. Just to be safe, download the MagiskManager app and also the uninstaller zip, so if you end up with a bootloop, you can uninstall it.
I don't think that you can change the recenets, but I might be wrong. If you click the 3 dots in the top right corner of the app, you can lock / unlock it.
I was wondering about the same. I tried to link the DND to the slider with Tasker, without luck so far.
To my knowledge, there is no stable version of Xposed for Pie just yet. There's a beta or alpha build which is somewhat working though.

xchikyx said:
As the title says, I just updated to OOS 9.0.3 and it's so different from the old one i'm really scared to try anything and risk to brick the phone...
I have several problems with the phone (nothing too scary thankfully) and I was thinking some of you could help here.
1) Nova Launcher isn't working properly. When I try to see the apps menu (where all the apps icons are displayed) it just doesn't show up, instead i just see the background and the apps can be seen just a bit in the upper part.
However, I can touch the screen and the apps open where the icons should be... I tried to update nova, but the apk gives me the "app not installed" error and I'm not sure why.
2) Not rooted. I want to root the phone. I had it rooted before the update, but considering the last time i tried to root the phone without looking exactly what to do all my memory got wiped, I need to know exactly how to install Magisk and TWRP without bricking the phone or deleting anything... I have a method already that works, but I'm not sure with this now.
3) Is it possible to change the "recent app" orientation to vertical instead of horizontal? Also, is there an easier way to lock and unlock a recent app?
4) Is there a way to link Do Not Disturb to the slider?
5) Xposed is not installed. To be honest I forgot how to install that one, has it changed with this new OS update?
I might have more questions, but that's all for now, I updated like an hour ago, so I haven't been able to try it out more
thank you
Click to expand...
Click to collapse
Please take some time and search the OP5 sub forum, you'll find a lot already
Your start is here(installation along with twrp and root) : https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003

thank you both

OnePlus 6T on Oxygen OS 10.3.3 CtsProfile: false problem

I have a OnePlus 6T T-Mobile converted to unlocked global ROM. I had Magisk rooted and working on OOS 9 with no TWRP.
I recently updated to OOS 10.3.3 from 9.0.17 and now the CtsProfile returns false on a safetynet check.
Am I supposed to install safetypatcher module for magisk?
(https://forum.xda-developers.com/apps/magisk/module-safetypatcher-t3809879)
Or am I supposed to install MagiskHidePropsConfig module?
Also, how do I flash the busybox installer if I need to install MagiskHidePropsConfig?
Do I need to boot into TWRP?

Just enable MagiskHide on Magisk Manager, then Magisk Hide the Google Play Store and Google Framework Services.
Good luck

yot2703 said:
Just enable MagiskHide on Magisk Manager, then Magisk Hide the Google Play Store and Google Framework Services.
Good luck
Click to expand...
Click to collapse
Hi,
I had MagiskHide active already before updating from OOS 9 to 10, and checking the Magisk Hide list I already have Google Play Services checked on the list of applications to hide Magisk from (Google Play Store does not show up on the list so I can't have it checked).
For what its worth, I tried to find Netflix on the Play Store and it doesn't show up meaning the Play Store is definitely detecting something is off.
Is there a way to make Play Store show up on the list of Magisk hide apps? (its not showing up at the moment)

digitalsonic said:
Hi,
I had MagiskHide active already before updating from OOS 9 to 10, and checking the Magisk Hide list I already have Google Play Services checked on the list of applications to hide Magisk from (Google Play Store does not show up on the list so I can't have it checked).
For what its worth, I tried to find Netflix on the Play Store and it doesn't show up meaning the Play Store is definitely detecting something is off.
Is there a way to make Play Store show up on the list of Magisk hide apps? (its not showing up at the moment)
Click to expand...
Click to collapse
You need to enable Show System Apps on the MagiskHide tab.

yot2703 said:
You need to enable Show System Apps on the MagiskHide tab.
Click to expand...
Click to collapse
Hi,
I enabled "show system apps", which made "google framework services" and "google play store" show up. I tried adding them to the magisk hide list then rebooting the phone.
Unfortunately, I am still getting a "ctsProfile: false" result when I run a SafetyNet check (basicIntegrity: true passes).
Thanks for the suggestions so far.
Do you have anything else I could try or does anything I might have missed come to mind?

I think you have a bad fingerprint. The answer you're looking for might be in the following link.
https://github.com/Magisk-Modules-R...ices-fingerprint-to-pass-the-ctsprofile-check

Ended up installing Magisk Hide Props Config module. For future reference the answers to my questions in the original post:
MagiskHidePropsConfig module -> Change fingerprint on the device to a certified one.
Also, how do I flash the busybox installer if I need to install MagiskHidePropsConfig? -> Put the zip file on your phone's storage and install as a module from Magisk Manager.
Do I need to boot into TWRP? -> No need to boot into TWRP, installation can be done via Magisk Manager module installer.

digitalsonic said:
Ended up installing Magisk Hide Props Config module. For future reference the answers to my questions in the original post:
MagiskHidePropsConfig module -> Change fingerprint on the device to a certified one.
Also, how do I flash the busybox installer if I need to install MagiskHidePropsConfig? -> Put the zip file on your phone's storage and install as a module from Magisk Manager.
Do I need to boot into TWRP? -> No need to boot into TWRP, installation can be done via Magisk Manager module installer.
Click to expand...
Click to collapse
Just about to try this out myself - which option did you choose if you don't mind me asking?
The one I was going to choose looks to be what I already have? I wanted to confirm before proceeding. TIA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A6013 using Tapatalk

Fire TV Tank 5.2.8.2 OTA Zip

Download:
Updated to 668700420
Fire TV Tank 5.2.8.2 OTA Zip 668700420.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is it the new UI?

Yes new Ui

0815hoffi said:
Yes new Ui
Click to expand...
Click to collapse
How (good/bad) is it working? Do you like it?

For me it works good, but i have disabled the Amazon Launcher ;-)

Sus_i said:
How (good/bad) is it working? Do you like it?
Click to expand...
Click to collapse
tank with the new UI is laggy as hell, compared to the "old" UI.

Ok, then I'll skip this update^^
I guess they want to drive us into the trade-in of all the older (unlocked) fire TV devices^^
They offer $3.00 for every tank, sloane, bueller and even the cube. Lol.
Thats a really awesome offer
Someone here should make a new thread about this opportunity
Amazon Trade-In: Get Paid for Your Used Items
Trade in Fire tablets, Kindle E-readers, streaming media players, and more for an Amazon.com Gift Card.
www.amazon.com

0815hoffi said:
For me it works good, but i have disabled the Amazon Launcher ;-)
Click to expand...
Click to collapse
Hello, I have a rooted fire stick (tank) with build 5.2.7.3. I too have disabled Amazon Launcher and replaced it with ATV launcher and Markus Firetools for settings.
Prime Video app used to work fine but since two days it is showing 'error code 8056' though the app version is matching to the one on the app store. More over it is forcing to update the OS. I tried clearing data, cache, updating the app through app store but it did not work.
Is it safe to update to 5.2.8.2 build through magisk to fix this error? Will it loose root access? Will it blow the efuse and lock the bootloader? I'm much worried about that. Pls clarify.
Edit: I have blocked and disabled the OTA updates as well. So it stays on 'Checking now' on the update screen.

Enable ota Updates over ADB and you can pass the update Screen. Then disable it again.
Yes you have root if you have flashed magisk.
But there is anything changed from Amazon, you can delete System Files, but can not write to system "no space left".
I think Amazon dynamic resizes the System Partition, currently i have found no solution for that.....
Maybe @Sus_i have a idea for that.

Can I allow ota access and let it update automatically to 5.2.8.2 or flash the zip manually through twrp? What's the correct way?

I would Flash manual over twrp ( Flash Firmware and Magisk ) and then allow ota.

0815hoffi said:
I would Flash manual over twrp ( Flash Firmware and Magisk ) and then allow ota.
Click to expand...
Click to collapse
Ok, what version of magisk is suitable for this device? Can I just rename the Magisk-v23.0.apk → Magisk-v23.0.zip and install it through twrp?

Use 20.4, 23 not working without mouse to accept root request.
20.4

kjay7 said:
Prime Video app used to work fine but since two days it is showing 'error code 8056'
Click to expand...
Click to collapse
Same here.
Will try to disable updates completely somehow and check what happens than...
EDIT: has somebody tried to completely remove the updater APKs, instead of just disabling them?
Should be (tank):
Code:
com.amazon.tv.forcedotaupdater.v2
com.amazon.device.software.ota"
com.amazon.device.software.ota.override

0815hoffi said:
But there is anything changed from Amazon, you can delete System Files, but can not write to system "no space left".
I think Amazon dynamic resizes the System Partition, currently i have found no solution for that.....
Click to expand...
Click to collapse
Remount the system r/w doesn't work?

Guys, here's the thing. I have wiped system, data, cache and installed 5.2.8.2 and magisk 20.4 through twrp. After the initial boot, did the basic setup. Noticed something weird with the prime video app. When I open the app or say 'open prime video' through alexa, it throughs the error code 8056 and says update required. Where as when I say 'search prime video' or 'search <movie>', the prime video app opens successfully and doesn't show any error! How can this be fixed?
BTW the build installed is 5.2.8.2 but on the update screen 5.2.8.0 is shown as new update!

Sus_i said:
Remount the system r/w doesn't work?
Click to expand...
Click to collapse
Remount works, same on TWRP "No space left on device"
I can delete but not write.
I have noticed this problem, i don't really need write access on my Stick.
But it is funny.
Maybe its a Problem with my Stick or Amazon has changed anything. ;-)
See Log-File

kjay7 said:
Guys, here's the thing. I have wiped system, data, cache and installed 5.2.8.2 and magisk 20.4 through twrp. After the initial boot, did the basic setup. Noticed something weird with the prime video app. When I open the app or say 'open prime video' through alexa, it throughs the error code 8056 and says update required. Where as when I say 'search prime video' or 'search <movie>', the prime video app opens successfully and doesn't show any error! How can this be fixed?
BTW the build installed is 5.2.8.2 but on the update screen 5.2.8.0 is shown as new update!
Click to expand...
Click to collapse
Make all Updaten and then disable OTA.
Maybe you must flash tz.img like the 4K Stick.
I have no Amazon Prime, so i can´t Test it.

0815hoffi said:
Remount works, same on TWRP "No space left on device"
I can delete but not write.
Maybe its a Problem with my Stick or Amazon has changed anything. ;-)
Click to expand...
Click to collapse
Just tried it from fireOS 5278 via adb shell and yeah, same here, no space left...
Edit: I thought maybe no free inodes, tried to run 'df -i' but no avail
Edit2: More than enough inodes free on system.

Is it possible for you to upload 'Fire OS 5.2.8.0 (668694820)' ota zip file? Though 5.2.8.2 is installed on the device, it is fetching 5.2.80 from the amazon server as an update and prompting to install that version. Can't install that from Firestick UI, so I need the zip file.