Hey guys,
finally i bricked my phone...
After a failed flash to TWRP recovery and a failed unbrick with fastboot, the phone won't start. Blackscreen. Only in device manager it show's "Qualcomm HS-USB QDLoader 9008". Is there any chance to unbrick or should i get a new mainboard?
PS: Sorry for my bad english, im from Germany
Thank you in advance
JaDa
@JaDaKiZz welcome to the party - read this http://www.reddit.com/r/lgg2/comments/2p5xei/the_lg_g2_is_unbrickable_a_story_of_death_and/ and let me know if you need any help. The MOST IMPORTANT thing you need to do is figure out the right KDZ for your phone.
Use http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxxxxxxxxx
replace xxxxxxxxxxxxxxx with your IMEI
Hey sandys,
the BoardDiag start but abort the test.
Linux don't show my G2 in devices. What can I do?
JaDa
Same thing happened to my phone. Thats what it shows in windows and isnt picked up by ubuntu. When I tried to use the lg tool to recovery it fails and says phone isnt in dload mode trying flash programmer. Dont have the money currently for @tungkick and dont see any other way.
How to Fix "error device not found in dload trying flash programmer" when use boardiag .
Lg g3 qualcomm 9008 when install driver then use tool boardiag fake tool say device not found in dload trying flash programmer
when you use tool fake board share in xda another tool say device not found in dload trying flash programmer. You need remove battery (of lg g2 hold power 1 minute) then connect cable again and use tool again
Sure install driver 100% wrong
With windowns 64 bit you need restart pc then click f8 choose disbable driver singturne....
Then remove battery (hold power 1 minute with lg g2) then connect cable try use tool unbrick >> sure done 100%
I will updload video error dload
Remember disbbale tool sony erricson if you have open tool in taskbar
How to fix “No response from the device. Check PMIC first and
if still boot problem, replace AP.”
Remove battery and connect again put qualcomm 9008 then use tool in topic
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-all-variants/ Just as helping
[*]I see very topic unbrick qualcomm 9008 lg g2, lg g3 but all tool can not use.
I have full tool board ver 2.9.( only 2.9).
Link download drive.google.xxx /file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view?usp=sharing (xxx= com)
Support lg g2, lg g3 workking 100%.
Download tool, open BoardDiag and choose file tot correct model phone of you( you can download tot in xda)
See guide in pictrure : very easy.
Note
Hold power 2 minute and connect cable ( or remove battery)>>And open tool check ap, emmc test again
Then unbrick done remove cable, hold power 30 second and hold volume up connect cable phone put downloadmod >> Use lgflashtool 1.5 flash file tot again >> done.
If done pls donate a few beers paypal of my Thank you very much.
Man you saved my ass Thank you so much !1 when i get my salary ill donate to you and tell everybody to do so cuz this tool is amazing. im in download mode now ill try to flash with lg flash tool.
Thank so much man but my g3 last week unbrick qualcomm i had I submit for warranty[emoji24] [emoji24] I am very Star-crossed [emoji20]
Hello friend willcracker
Hello friend willcracker :good:
I hope all is well;
I saw this little tutorial so I want to ask for help
I have a LG G3 D855p and my phone is dead (bricked)
I can not quite understand the method you friend
not turn on my phone
I can not enter the "" Download Mode ""
VOL + Up when I connect the USB cable to the PC recognizes me as:
Qualcomm HS-USB QDLoader 9008 (COM10)
why I ask for help to revive my g3
If you help me ... .. I promise to donate something for you
you send a file "picture" attached
- - As I can get to "" Fastboot Mode "" on my phone
I hope your prompt response, please do not ignore my message :crying:
greetings from peru
You need to Disassemble Phone and Expose the TP Location
See pictrue
Expose the TP Location.
Done phone put qualcom 9008>> use tool unbrick
Remeber unplug battery connect only cable and short testpoint
Thanks for responding, but I need your help please friend
Hello willcracker I have no such tool you indicate "tool unbrick testpoint"
I could do this step with some type of cable or wire?
- If you Might tell me how to do that step with another option
leave your email. to chat google chat (Houngts) and you help me please
I'm worried because my g3 d855p not light, or anything like I said ....
await your prompt response, I hope you can help me
TOT Firmware, must match installed version?
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
Lollipop was installed, goal was to move to a custom rom (blisspop v2.3)
Rooting was successful
Install of twrp not, reboot into recovery caused the 'signature verification error'
Tried to flash the kitkat rom via the download method, failed, ...
Currently, I have the same verification error also when trying to get into download mode and have the Qualcomm HS-USB QDLoader 9008 in my device manager.
I have the LGD855AT-00-V10e-EUR-XX-JUL-08-2014-16G+0.tot file and did the first step of your procedure. Can I do the second step with this extract of kitkat even if lollipop was installed?
any feedback greatly appreciated!
Hello willcracker thanks, thanks for reply but I need your help please
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
Greetings from Peru
Click to expand...
Click to collapse
NO you need find google how do short testpoint samsung n7100 you see they guide short testpoint . Lg when short testpoint phone detect qualcomm 9008
And you use tool board diag unbrick.
???
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
Click to expand...
Click to collapse
I'm in the same boat! Could you please explain it a little better?
frank.devliegher said:
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
any feedback greatly appreciated!
Click to expand...
Click to collapse
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Ahh now i see!
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
sourly64 said:
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
Click to expand...
Click to collapse
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
Model Lg d851? writh
rememer ber tool suppoer only lg g3 f400s/l/k , lg d855 16gb and 32gb.
If use tool say error pcmic on tool not support (Ex: lg d851)
I up load only msm8974ac g3 msm8975ac g3 no upload
Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
It seems won't work.I have gone through about this problem.Alway AP Check fail.QPST reported that phone had been in Sahara download mode for few seconds.A RMA fix my phone.But it cost me about 50dollars
willcracker said:
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Click to expand...
Click to collapse
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
TOT Version
willcracker said:
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Click to expand...
Click to collapse
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
frank.devliegher said:
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
Click to expand...
Click to collapse
YES you can use tot kikat unbrick .
sourly64 said:
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
Click to expand...
Click to collapse
sr i have not upload hex lg gpro waitting comming soon.
Hello,
I've got in possession over larger amount of hardbricked L3 phones (20+ pieces).
All the phones show no reaction at all, irrelevant to the key combination pressed (no recovery, emergency or reset mode work). But phones show QDLoader 9008 and are nicely recognized by QPST.
Now im wondering, if is possible to restore those bricked phones? Or... they are ready to be used as bricks? Id like to restore them and donate to charity center.
So far what i have tried:
QPST: I've created file MSM7225A (From extracted KDZ file, emmc_appsboot.bin file), but unfortunately, it seems that QPST doesnt support 7225A EMMC? just NAND?? kinda confusing
However, upon executing my hex with (msm7225a NAND) QPST throws an error "could not determine the hex files scrambling method. the file is invalid". Any idea where i could get MSM7225 hex file.. or maybe my procedure is wrong?
next i have tried
BoardDiag3.99: Unfortunately this program, seems doesnt support L3, but it does support L3II and L5 with MSM7225 (it should work i suppose).. worth a try i thought, but then i could not find .tot files required by this program.. (extracting KDZ/DZ/CAB to TOT doesnt work for LE)... Any idea where i could get L3 TOT files? or how i could make them? Or how to use BoardDiag with L3 at all?
Next i have tried
LgMobile Support Tool, KDZ flasher, LG Flash Tool, B2B lg mobile,, but none of them recognize the phones
I'd appreciate if anyone know the way, how to flash the phones.. thank you
p.s. this is my first phone flash rodeo :laugh:
bump? :angel:
Help please, sees the phone as qualcomm hs-usb qdloader 9008, in the mode "Emergency mode" is not included.
bump
I tryed to update my d802 G2 to lolipop it all went good but after the update finished the phone found on usb like LGE mobile usb serial port on com port and some other drivers but stuck in flashing led and LG logo...
when holding the power button plus volume up it says download mode but pc doesnt detect anything hard reset was also freezing..
so i downloaded tot file extact it tryed to flash with several tools and guides i found here no luck...i forced it into Qhusb_bulk and used some cmd tool to push images from the tot file i extracterd now....phone still no download mode(says download but not detectable on pc)
the hard reset goes well now the phone restarts everything normal still on LG logo but no flashing led...and found on usb like LGE usb serial port.
and now when i try to force it into Qhusb i get qdloader 9008. after instaling the driver...before i saw many hdd and partitions.
any help is apriciated...
aleannes said:
srk tools 2.1 repara os arquivos
Click to expand...
Click to collapse
ENGLISH IS THE PRIMARY LANGUAGE HERE. this is the second post you have made in a different language
Kindly follow the FORUM rules.
I've used tools srk
SREEPRAJAY said:
ENGLISH IS THE PRIMARY LANGUAGE HERE. this is the second post you have made in a different language
Kindly follow the FORUM rules.
Click to expand...
Click to collapse
excuse me for writing in Portuguese, Srk tools repairs files.
Hello i have an lg LG G4c (H525N) hard bricked when i was trying to update via lg flash tool.Now the phone is dead no download mode ,no recovery no nothing.When i connect to my pc it recognizes it as Qualcomm HS-USB QDLoader 9008 but no partitions appear in windows partition manager .Please Is any way to help me unbrick my device?
G4C dead
dimi cavaro said:
Hello i have an lg LG G4c (H525N) hard bricked when i was trying to update via lg flash tool.Now the phone is dead no download mode ,no recovery no nothing.When i connect to my pc it recognizes it as Qualcomm HS-USB QDLoader 9008 but no partitions appear in windows partition manager .Please Is any way to help me unbrick my device?
Click to expand...
Click to collapse
Did You Fixed it?
justsalaam said:
Did You Fixed it?
Click to expand...
Click to collapse
No i send it to Lg and they fix it
dimi cavaro said:
No i send it to Lg and they fix it
Click to expand...
Click to collapse
Dimi,i have the same problem,but Greece's LG Service answered me that my motherboard failed,i am still trying to explain them that its a software fail but no luck.Where did you sent your phone?