installed firmware:
https://ibb.co/ggCYYkN
recovery:
https://ibb.co/bzd8dxs
i try to install :
G950FXXU4CRJ5_G950FOXM4CRJ3_ARO
Prince Comsy Odin v3.12
first time i tryed to burn the rom i got in odin write failed (or similar i didn't write it down).
second time and later i get PIT error
https://ibb.co/cxYd0YP
please your help to understand whats going on with this device \ firmware
do-d said:
installed firmware:
https://ibb.co/ggCYYkN
recovery:
https://ibb.co/bzd8dxs
i try to install :
G950FXXU4CRJ5_G950FOXM4CRJ3_ARO
Prince Comsy Odin v3.12
first time i tryed to burn the rom i got in odin write failed (or similar i didn't write it down).
second time and later i get PIT error
https://ibb.co/cxYd0YP
please your help to understand whats going on with this device \ firmware
Click to expand...
Click to collapse
Looks like judging from your screen shots
1. You are trying to flash F firmware onto a U device. Exynos to snapdragon. Will cause you issues.
2. You will need Odin ( or patched Odin ) 3.13.1 or higher
3. You will need a binary ( bootloader ) version 5 or higher.
Just download latest firmware from sammobile
spawnlives said:
Looks like judging from your screen shots
1. You are trying to flash F firmware onto a U device. Exynos to snapdragon. Will cause you issues.
2. You will need Odin ( or patched Odin ) 3.13.1 or higher
3. You will need a binary ( bootloader ) version 5 or higher.
Click to expand...
Click to collapse
thank you!
phone was sold as F model , it has all stickers saying its F model
here it looks like an F firmware installed https://ibb.co/ggCYYkN
but its a U model ?
so for next time what is the right way to get the real device model ?
do-d said:
thank you!
phone was sold as F model , it has all stickers saying its F model
here it looks like an F firmware installed https://ibb.co/ggCYYkN
but its a U model ?
so for next time what is the right way to get the real device model ?
Click to expand...
Click to collapse
There are many guides on the internet regarding to phone authentication and about refurbished phones.
On your S8, since it doesn't have a removable battery, on the back, down the bottom, should show model no. etc. engraved on it ( not stickers ).
On the back it will also show iIMEI + serial number. Compare it to what it say's on the phone ( about phone + *#06# ) to the back engraving.
There are websites that can check your IMEI number to give you various information about the phone.
Buying a phone from the internet ( eg: eBay etc.) using the IMEI can be used as a way to check the phone.
i just got one more device from a local store , it's not official retailer of samsung , its from a paralel imports
and its the same ****
firmware box and stickers say SM-G950F
recovery say SM-G950U, i didn't tried to flush because i cant get the OEM unlock.
BTW is it possible to downgrade this device to android 8 ?
image uploader
so if i understood right i should be able to flush this firmware on this phone
G950USQU5CRL2
?
do-d said:
so if i understood right i should be able to flush this firmware on this phone
G950USQU5CRL2
?
Click to expand...
Click to collapse
In download mode it will have a line with PR SWREV
The number after the B is your binary ( bootloader ) number.You will need to flash this number or higher. You can not downgrade binary numbers.
Depending on what firmware you flash U or U1 you may need patched Odin.
spawnlives said:
In download mode it will have a line with PR SWREV
The number after the B is your binary ( bootloader ) number.You will need to flash this number or higher. You can not downgrade binary numbers.
Depending on what firmware you flash U or U1 you may need patched Odin.
Click to expand...
Click to collapse
so from Download Mode picture i can say binary 7 it is
in this firmware G950USQU5CRL2 U5 is it the binary or is it the security patch ?
do-d said:
so from Download Mode picture i can say binary 7 it is
in this firmware G950USQU5CRL2 U5 is it the binary or is it the security patch ?
Click to expand...
Click to collapse
Binary ( bootloader ) is the 5th number from the right of the firmware ( in the above post it's 7 )
e.g.:G950USQU5CRL2 - 5 is the binary number.
The letters/numbers after the binary number will tell you version ( security patch ) issue information but is easier to check the date of the firmware from the website you are downloading from.
thank you @spawnlives i really appreciate this
spawnlives said:
Binary ( bootloader ) is the 5th number from the right of the firmware ( in the above post it's 7 )
e.g.:G950USQU5CRL2 - 5 is the binary number.
The letters/numbers after the binary number will tell you version ( security patch ) issue information but is easier to check the date of the firmware from the website you are downloading from.
Click to expand...
Click to collapse
Sir, my binary matched with the ROM, but I get the error again as "secure check failIT", "sw rev check fail device 2 binary 1" and "secure check fail bootloader"
can u share the link to download the appropriate bootloader for J5 Prime(G570F)
Related
Hi Guys,
I have a problem here. I flashed a custom ROM on my note 3 yesterday ( Euphoria ). Anyway now I am having some trouble ( after rebooting the phone ). It will consistently move into the error state :
" Firmware encountered a problem.... etc "
I can boot into download mode, and I attempted via Odin to flash a recovery file ( TWRP,PhilZ,CWM etc ), but it keeps failing. I figured then to download the stock firmware, but I am not quite sure which region the phone is on. Can I download any stock SM-N9005 firmware and try to apply it ? I did try to flash a HK stock firmware, but I got this error "
" aboot.mbn
FAIL (AUTH "
On the phone I get :
SW REV CHECK FAIL: [aboot]Fused 3 > Binary 1
I believe this relates to the firmware ? But I am unsure which firmware file to use as I am unsure of the phones original region.
What else could I do from here ?
vira4783 said:
Hi Guys,
I have a problem here. I flashed a custom ROM on my note 3 yesterday ( Euphoria ). Anyway now I am having some trouble ( after rebooting the phone ). It will consistently move into the error state :
" Firmware encountered a problem.... etc "
I can boot into download mode, and I attempted via Odin to flash a recovery file ( TWRP,PhilZ,CWM etc ), but it keeps failing. I figured then to download the stock firmware, but I am not quite sure which region the phone is on. Can I download any stock SM-N9005 firmware and try to apply it ? I did try to flash a HK stock firmware, but I got this error "
" aboot.mbn
FAIL (AUTH "
On the phone I get :
SW REV CHECK FAIL: [aboot]Fused 3 > Binary 1
I believe this relates to the firmware ? But I am unsure which firmware file to use as I am unsure of the phones original region.
What else could I do from here ?
Click to expand...
Click to collapse
Try any rom if your phone is not hg. Try plan or German.
kenny1991 said:
Try any rom if your phone is not hg. Try plan or German.
Click to expand...
Click to collapse
Well I downloaded a Poland firmware and I keep getting an error relating to the system.image.ext4.
Tried various PIT files but still no luck
Hi everyone
I have a g935f with oreo firmware.But i don't have imei and baseband.I try to flash combination file but always ends with error.I can flash firmware but only binary 3, but always no modem. I try to repair with z3x box but it says
try downgrade modem if possible.
Any help will be welcome
Thank you very much
I did it after many many tries.Only solution it with combination firmware.After that write firmware but whithout CP in odin or z3x.Same binary.Repair imei and unlock.JOB DONE
marinicaalexandru said:
I did it after many many tries.Only solution it with combination firmware.After that write firmware but whithout CP in odin or z3x.Same binary.Repair imei and unlock.JOB DONE
Click to expand...
Click to collapse
Link for the combination file please?
Im with Binary 3 too and cannt downgrade
Thank you
combination file s7 edge
https://addrom.com/collection-combination-rom-samsung-s7-edge/
query, did you manage to downgrade ?, or just by flashing the firmware combination you can now repair or change the imei with the z3box in oreo?
could you tell me the steps plis? Thx
you cannot downgrade binary 3.just flash combination firmware.binary 3 of course.enable usb debugging in settings/developer options.shut down.put in download mode an flash binary 3 firmware.oreo.without boot and modem.BL and CP.after that repair imei if it not shown.i write cert data and it was ok
marinicaalexandru said:
you cannot downgrade binary 3.just flash combination firmware.binary 3 of course.enable usb debugging in settings/developer options.shut down.put in download mode an flash binary 3 firmware.oreo.without boot and modem.BL and CP.after that repair imei if it not shown.i write cert data and it was ok
Click to expand...
Click to collapse
You repaired imei you did it with the z3 box?
yes.it is possible that combination firmware read imei ok.it happens
marinicaalexandru said:
yes.it is possible that combination firmware read imei ok.it happens
Click to expand...
Click to collapse
ok, and the last thing, I can change the imei of the device with the box z3, because unfortunately I had my device with the imei changed without knowing it, so I updated my device from mm at oreo it and changed my imei and now I have no signal, so I would like to patch the certificate that I had before, since you can not do dowgrade
the imei is written on the back cover.you must write that imei.i am not sure if it works with another imei
Hello i have bootloap on my Samsung Galaxy S8 Plus ( SM-G955F).
1) I succesfully rooted phone by this vid. www,youtube,com/watch?v=XNznlTJJesc(just replace , after www and after youtube)
2) In App Magidisk i download Busybox and i have restarted phone.
3) Phone starts by ,,Samsung Galaxy S8 Plus" but in left corner is ,,Only official released binaries are allowed to be flashed".
Please, please you all, help me with this
I will love you!
Thank you a lot for any response.
Sorry for my bad english.
UPDATE
Update
odin mode
download speed: Fast
product name : Sm-g955f
current binary : Custom
system status : Custom
amm status : Prenormal
fap lock : Off
oem lock : Off
secure download : Enabled
..
..
Sw rev. Check fail (bootloader) device: 4, binary 1
moullcz said:
Update
odin mode
download speed: Fast
product name : Sm-g955f
current binary : Custom
system status : Custom
amm status : Prenormal
fap lock : Off
oem lock : Off
secure download : Enabled
..
..
Sw rev. Check fail (bootloader) device: 4, binary 1
Click to expand...
Click to collapse
1. Sw rev check fail - you are try to flash older firmware than what is on your phone. You will need to find firmware with bootloader 4 or higher ( 5th number from right of firmware name.
2. Official binary error is due to your rmm state being in pre-normal. This guide maybe of some help to you.
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
3. If you want to downgrade you will need firmware with the same bootloader version as what is on your phone.
Fixed by new ap & bt
spawnlives said:
1. Sw rev check fail - you are try to flash older firmware than what is on your phone. You will need to find firmware with bootloader 4 or higher ( 5th number from right of firmware name.
2. Official binary error is due to your rmm state being in pre-normal. This guide maybe of some help to you.
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
3. If you want to downgrade you will need firmware with the same bootloader version as what is on your phone.
Click to expand...
Click to collapse
I downladed new OS from sammobile and installed by odin.
Fixed. Thank you!
Can't flash firmware for S7 Edge G935V. Error: SW REV CHECK FAIL: Fused 10 > Binary 4
The firmware is G935VVRS4CRI1 (Android 8.0). Current firmwave on my S7 Edge G935V is G935VVRUACSH1.
I use Odin v3.13.1 to flash and meet this error:
SW REV CHECK FAIL: Fused 10 > Binary 4
How do I fix it? Thank you!
i get the same thing unsure of what to do
duchoa1995 said:
The firmware is G935VVRS4CRI1 (Android 8.0). Current firmwave on my S7 Edge G935V is G935VVRUACSH1.
I use Odin v3.13.1 to flash and meet this error:
SW REV CHECK FAIL: Fused 10 > Binary 4
Click to expand...
Click to collapse
You are attempting to flash an old bootloader version over a new bootloader. This message directly means that the e-fuse for a v10 bootloader is trying to be flashed over a v4 bootloader. You can identify the version of bootloader by looking at the fifth digit from the end of the firmware (G935VVRS4CRI1=v4, G935VVRUACSH1=v10). If you want to flash a stock frimware,please ensure that fifth digit from the end matches, as the bootloader version was upgraded early in 2019.
njmcinty said:
You are attempting to flash an old bootloader version over a new bootloader. This message directly means that the e-fuse for a v10 bootloader is trying to be flashed over a v4 bootloader. You can identify the version of bootloader by looking at the fifth digit from the end of the firmware (G935VVRS4CRI1=v4, G935VVRUACSH1=v10). If you want to flash a stock frimware,please ensure that fifth digit from the end matches, as the bootloader version was upgraded early in 2019.
Click to expand...
Click to collapse
Thank you so much. This will be helpful! :good:
duchoa1995 said:
The firmware is G935VVRS4CRI1 (Android 8.0). Current firmwave on my S7 Edge G935V is G935VVRUACSH1.
I use Odin v3.13.1 to flash and meet this error:
SW REV CHECK FAIL: Fused 10 > Binary 4
How do I fix it? Thank you!
Click to expand...
Click to collapse
Also because your device does not have an unlocked bootloader you are stuck on that firmware it is impossible to downgrade back to nougat. I have tried with every piece of firmware that exists for this variant and it is totally a 100% fused to at least V8. Now I'm on the absolute latest firmware which is V10. Luckily the Eng boot image for V8 still works on V10. But until they use the same bootloader on this firmware you will not be able to downgrade. However it is not looking very good that they will use the same one. Generally that only happens in some cases with the first firmware revision to the new Android version. In the case of g930p, there was no such instance. Basically your phone is the same phone is mine the only thing that differs is the carrier.
DragonFire1024 said:
Also because your device does not have an unlocked bootloader you are stuck on that firmware it is impossible to downgrade back to nougat. I have tried with every piece of firmware that exists for this variant and it is totally a 100% fused to at least V8. Now I'm on the absolute latest firmware which is V10. Luckily the Eng boot image for V8 still works on V10. But until they use the same bootloader on this firmware you will not be able to downgrade. However it is not looking very good that they will use the same one. Generally that only happens in some cases with the first firmware revision to the new Android version. In the case of g930p, there was no such instance. Basically your phone is the same phone is mine the only thing that differs is the carrier.
Click to expand...
Click to collapse
Actually I try all ways I can find to fix the "camera failed" error, but it's still not working now. So if I downgrade my phone to previous firmwares (as V10, V9, V8...), can I maybe fix it?
I have been trying to install a new firmware using odin3. It doesn't work and it keeps showing "SW REV. CHECK FAIL(BOUTLORDER) DEVICE: 8. BINARY:1
My phone model is SM-G935F
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Ksam1 said:
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Click to expand...
Click to collapse
Hello There!
You can download your Firmware here (https://galaxyfirmware.com/model/SM-G935F/)
while finding a firmware, you will see something like this G935FXXS8ETC1, the 9th digit is the Bootloader Version or BINARY. since your binary is 8 you should find a firmware with the same Binary. I think you can choose any region right there as long as its open-line (choosing a different region from yours might end up a slow device).
Since your BINARY IS 8, you can only download a Android 8 Firmware for your S7 Edge.
Goodluck!