Atoto A6 bluetooth1 disconnects - Android Head-Units

I installed an atoto A6 headunit and everything seems to work fine except bluetooth1. It worked for a phone call but if I try to stream music or audible from my phone then it instantly disconnects and reconnects. It shows the title of the media on the headunit but just won't play it. I've tried clearing the data in all the Bluetooth system apps and it didn't help. Wasn't sure if theres a way to clear the BT Music app data though. It doesn't show in the apps installed and clearing the data in the other Bluetooth apps doesn't clear my phone from the paired device list so I don't think I'm actually clearing any data. Not sure what to do now

Related

Bluetooth Problems via wireless

Have an issue with my S5 bluetooth. When i connect it to my bluetooth speaker and play youtube etc via wireless the music keeps skipping and becomes distorted. The same speaker works fine with my Nexus tablet and a cheap android phone I have. If i use my data connection it's fine but as soon as i connect via my home wi-fi again the music again becomes distorted.
Anyone experienced similar or have any ideas what might be causing this.
S5 is on stock Three Uk rom and is unrooted.
Did you switch to art from dalvik. I have the same problem with Bluetooth and my car stereo. I switched to art, wondering if that's the issue.
Nala2 said:
Did you switch to art from dalvik. I have the same problem with Bluetooth and my car stereo. I switched to art, wondering if that's the issue.
Click to expand...
Click to collapse
Nope i'm still on Davlik.
Hi, I went into application manager and cleared cache in Bluetooth and Bluetooth share apps and... so far so good

Desperate Bluetooth problems...

S6 + Edge Att.
OK so here's the deal:
There are two bluetooth connections to the car; Calls & Media
If I have both connected, the bluetooth connection constantly drops.
If I disconnect Calls and leave Media connected, its flawless.
If I disconnect Media and leave calls connected, flawless.
But when both are connected it wont last 5 minutes without disconnecting.
This issue is close to making me want to drive the car into a tree - if anyone has a suggest I seriously appreciate it!
try resetting the car audio setup, and remove the pair between the phone and the Car Audio
sometimes even if you reset it the car audio might keep the paired devices saved
is this a OEM car audio set up, or a aftermarket one.
please lemme know
Pubbaa said:
try resetting the car audio setup, and remove the pair between the phone and the Car Audio
sometimes even if you reset it the car audio might keep the paired devices saved
is this a OEM car audio set up, or a aftermarket one.
please lemme know
Click to expand...
Click to collapse
Thanks - its the BT connection to a 2015 Acura. I have reset it several times. Another clue is that if the phone is reset to stock it works well for about 2 weeks. I have very few apps any I restore them the day the phone is wiped so its not an app or setting...it's almost as if something get cached and then starts to falter....
See if the car audio bluetooth is still visible after you have paired it.
Trying doing this with another phone.
After resetting the car audio did you check if the car has the phone still as an authorized devices
If true that will be the culprit
What are the apps you use?
Streaming/offline apps
Almost forgot....
Don't let the car retrieve your contact details and phone book. Sometimes this makes the cars audio to go loco
Sent from my SM-G928C using Tapatalk
Thanks Pubbaa - going to try another phone to see if it happens as well...
DPLOY said:
Thanks Pubbaa - going to try another phone to see if it happens as well...
Click to expand...
Click to collapse
check if the phonebook is shared with the car audio, if it asks to sync ...don't let it
issue with call logs and phonebook contacts can cause the audio system to restart or hang, i faced a similar issue.

Bluetooth media audio

I have G37 2013. Phone pairs but won't let me to enable media audio. I can make and receive calls. Had no issues with S6 edge. I have wiped bluetooth share cache, I unpaired and paired again. I went into recovery and wiped cache their too. This is killing me I would like to stream my music!! Any other suggestions or ideas?
My only problem is that there is no text on my car display. Pairing works perfect. At my old S4 text is there.
my guess is that the older headunit doesnt support the new version of bluetooth and the way it send the Audio data, that is the problem with my headunit anyway

Bluetooth headset control issues

Currently, on OOS 9.0.4, Bluetooth headset controls do not work correctly for me. I'm fairly certain there is no fix right now and I'll just have to wait for OnePlus to issue one.
When I press the Play/Pause button on my headset, the music app hangs (or crashes, if it is in the background) and the music remains paused. Skipping songs seems to work fine.
I've encountered this issue with both my bluetooth headphones (from Audio Technica and AKG respectively) and with every combination of Bluetooth option I could find in the settings (aptx on/off, media/ media + calls). This also occurs with multiple music apps, including Google Play Music and Phonograph.
I contacted OnePlus and they brought me through all sorts of steps mostly to do with signal strength, culminating in clearing the system cache and even a factory reset using the recovery. Nothing has worked yet.
I'm not too hopeful, but if you have any advice, please submit it below.
(Note: I'll be submitting this post to the OnePlus forums too, if I stop getting errors about not having permission to post)
I think it's just you. I'm on OOS 9.0.5 (and was using 9.0.4) on Spotify with the OnePlus Wireless buds (the ones from 6 months ago that were released). Buttons work fine. Volume and play/pause along with double tap commands.
Pair device again and uninstall offending app (along with clear data/cache) and try again perhaps.
EDIT: Also both of my vehicles work flawlessly with Bluetooth control. Can't say that for my old 5T or 6. Those two constantly required disconnect and reconnect of the Bluetooth to get them working. Only difference on 6T is not rooted...interesting but not complaining.
Unfortunately I'm not sure which app is the offending one, if any. I have a very similar setup on my old phone and there are no issues there.
I tested it immediately after doing a factory reset (most of the apps had not restored yet) and it still occurred. Tried Eon Player and Spotify too now, no success.
Armand Bernard said:
I tested it immediately after doing a factory reset (most of the apps had not restored yet) and it still occurred. Tried Eon Player and Spotify too now, no success.
Click to expand...
Click to collapse
1.) Try pairing the offending bluetooth device to another media player and see if it works
2.) Try another bluetooth audio device with your OnePlus and see if that works.
That should help narrow it down more as to which is the culprit. I'm still thinking it's not the phone but your bluetooth devices not playing happy. Maybe go into developer options and play around with the bluetooth options in there...
Nosferatu. said:
1.) Try pairing the offending bluetooth device to another media player and see if it works
2.) Try another bluetooth audio device with your OnePlus and see if that works.
Click to expand...
Click to collapse
Yeah I've done both of those things. Both sets of bluetooth headphones I own work fine with my old Samsung Galaxy A5 on Nougat but not on my OnePlus.
I've contacted OnePlus and sent them logs, so it's in their hands now.

Zlink 5 | Music pauses after notification on Android Auto

Hello everyone,
A month ago, I bought a stereo with Android 11 that has Zlink 5.2.2 installed, and I used it so far with an iPhone 8 until I get the Android phone I had just bought. Everything was fine with Carplay, I used Waze and Youtube Music simultaneously and had no problems.
Once I connected my Android phone (Oneplus 9 Pro) to the stereo with Android Auto wireless, the glitches started. The music plays fine, and Waze works perfectly, but when there is any kind of notification, when it ends, the music is muted. To continue with the music, I have to stop and play it again, then the music volume comes back. If there is another notification (when the music is "muted"), the music comes to be heard slightly, but as soon as the notification ends it goes back to mute. I know it is muted because if I let the song run, and it finishes it goes to the next song (HUD) but it is still not heard.
I have looked to see if this problem was solved in any forum and only found these two:
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86059821
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86139335
I make a specific article for this issue because these two answers are in an article that is not specific to this problem.
If anyone can provide a solution to this issue, I would greatly appreciate it.
Data:
- Android 11 (stereo and mobile)
- Zlink 5.2.2
- Android Auto 7.4.120744-release.daily
If you need more data, let me know. I'm new with this app, so bear with me.
I'm having a similar issue. Every notification pauses spotify. I know it is paused because the icon of the button changes from pause to play. I have to hit the play button to reproduce the music again. This really bothers me. If you fix it please let us know.
magicdidac said:
Hello everyone,
A month ago, I bought a stereo with Android 11 that has Zlink 5.2.2 installed, and I used it so far with an iPhone 8 until I get the Android phone I had just bought. Everything was fine with Carplay, I used Waze and Youtube Music simultaneously and had no problems.
Once I connected my Android phone (Oneplus 9 Pro) to the stereo with Android Auto wireless, the glitches started. The music plays fine, and Waze works perfectly, but when there is any kind of notification, when it ends, the music is muted. To continue with the music, I have to stop and play it again, then the music volume comes back. If there is another notification (when the music is "muted"), the music comes to be heard slightly, but as soon as the notification ends it goes back to mute. I know it is muted because if I let the song run, and it finishes it goes to the next song (HUD) but it is still not heard.
I have looked to see if this problem was solved in any forum and only found these two:
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86059821
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86139335
I make a specific article for this issue because these two answers are in an article that is not specific to this problem.
If anyone can provide a solution to this issue, I would greatly appreciate it.
Data:
- Android 11 (stereo and mobile)
- Zlink 5.2.2
- Android Auto 7.4.120744-release.daily
If you need more data, let me know. I'm new with this app, so bear with me.
Click to expand...
Click to collapse
I have found a solution for my case. I have bought a Chinese android head unit and using Android Auto by cable through Zlink. Every notification from the system pauses Spotify. When I turned off Bluetooth, the issue has disappeared. I have no idea why, but it seems that, in my case, since Android Auto works by cable, all the instructions are made by cable, so if Bluetooth is turned on, it was like all the instructions were duplicate, one by cable and another by Bluetooth, like a notification lowering the volume twice, which is equivalent to a pause, I don't know. The thing is, if Bluetooth is not connected, everything works just fine with Android Auto, no pause of music by any notification or Waze directions.
This started happening for me for CarPlay on zlink version:4.0.41.01 on ios15. it sometimes dips the music but majority of the time cuts it out. disabling Bluetooth didn’t help. Does anyone have a fix?
magicdidac said:
Hello everyone,
A month ago, I bought a stereo with Android 11 that has Zlink 5.2.2 installed, and I used it so far with an iPhone 8 until I get the Android phone I had just bought. Everything was fine with Carplay, I used Waze and Youtube Music simultaneously and had no problems.
Once I connected my Android phone (Oneplus 9 Pro) to the stereo with Android Auto wireless, the glitches started. The music plays fine, and Waze works perfectly, but when there is any kind of notification, when it ends, the music is muted. To continue with the music, I have to stop and play it again, then the music volume comes back. If there is another notification (when the music is "muted"), the music comes to be heard slightly, but as soon as the notification ends it goes back to mute. I know it is muted because if I let the song run, and it finishes it goes to the next song (HUD) but it is still not heard.
I have looked to see if this problem was solved in any forum and only found these two:
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86059821
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86139335
I make a specific article for this issue because these two answers are in an article that is not specific to this problem.
If anyone can provide a solution to this issue, I would greatly appreciate it.
Data:
- Android 11 (stereo and mobile)
- Zlink 5.2.2
- Android Auto 7.4.120744-release.daily
If you need more data, let me know. I'm new with this app, so bear with me.
Click to expand...
Click to collapse
can you dump your version of Zlink i have 5.2.14 i dont have this problem but i have problem with the car unit not going into HD
Zlink5-V5.3.01 2022-9-19
1. Adapt to TS10 vertical screen, long screen (horizontal screen), and rotating screen UI display problems
2. The background picture of the car and the machine in the carplay auto connection interface with a resolution of 1024x600 to simple ILINK5 is different from the old version (resolved);
3. Optimized the adaptation of the carplay interface of the rotating screen.
4. Increase the number of mfi reads.
5. Optimize Auto display clarity.
6. Optimized the first connection to wired carplay is about 20s slower - about 11~13 seconds after optimization.
7. Solution: When the wireless Android or Apple screen is mirrored, the USB connection between the car and the mobile phone will be disconnected.
8. Solution: Use USB to connect the car and mobile phone in the state of wireless carplay or wireless auto. At this time, the wireless carplay or wireless auto will be disconnected.
9. Solution: When the car is not connected to the Internet, it will display the 2D that needs to be activated---add a pop-up prompt
10. Activation problems: Customer feedback: When scanning the code to activate, the phone appears to be out of authorization; /Customer feedback: After TLINK5 is activated, click refresh to activate and it shows that the activation is not successful.
11. The T3P cannot be connected and the service is unavailable
12. Solve the problem that the wired auto cannot be connected
13. Connect the wired Carplay and disconnect the ACC from hibernation. After hibernation, it will not be detected.
14. Wired carplay on ts18 causes the disc to not be read
15. The problem of automatic reconnection after wireless CarPlay ACC
16. When Android Auto is playing music, the music continues to play when entering reverse and then exiting
17. Optimize the connection speed and stability of wireless carplay
Download Zlink5 V5.3.01
aRaychan said:
Tlink5-V5.3.01 2022-9-19
1. Adapt to TS10 vertical screen, long screen (horizontal screen), and rotating screen UI display problems
2. The background picture of the car and the machine in the carplay auto connection interface with a resolution of 1024x600 to simple ILINK5 is different from the old version (resolved);
3. Optimized the adaptation of the carplay interface of the rotating screen.
4. Increase the number of mfi reads.
5. Optimize Auto display clarity.
6. Optimized the first connection to wired carplay is about 20s slower - about 11~13 seconds after optimization.
7. Solution: When the wireless Android or Apple screen is mirrored, the USB connection between the car and the mobile phone will be disconnected.
8. Solution: Use USB to connect the car and mobile phone in the state of wireless carplay or wireless auto. At this time, the wireless carplay or wireless auto will be disconnected.
9. Solution: When the car is not connected to the Internet, it will display the 2D that needs to be activated---add a pop-up prompt
10. Activation problems: Customer feedback: When scanning the code to activate, the phone appears to be out of authorization; /Customer feedback: After TLINK5 is activated, click refresh to activate and it shows that the activation is not successful.
11. The T3P cannot be connected and the service is unavailable
12. Solve the problem that the wired auto cannot be connected
13. Connect the wired Carplay and disconnect the ACC from hibernation. After hibernation, it will not be detected.
14. Wired carplay on ts18 causes the disc to not be read
15. The problem of automatic reconnection after wireless CarPlay ACC
16. When Android Auto is playing music, the music continues to play when entering reverse and then exiting
17. Optimize the connection speed and stability of wireless carplay
Download Tlink5 V5.3.01
Click to expand...
Click to collapse
This does not work with other headunit
magicdidac said:
robsonselzelin said:
I have found a solution for my case. I have bought a Chinese android head unit and using Android Auto by cable through Zlink. Every notification from the system pauses Spotify. When I turned off Bluetooth, the issue has disappeared. I have no idea why, but it seems that, in my case, since Android Auto works by cable, all the instructions are made by cable, so if Bluetooth is turned on, it was like all the instructions were duplicate, one by cable and another by Bluetooth, like a notification lowering the volume twice, which is equivalent to a pause, I don't know. The thing is, if Bluetooth is not connected, everything works just fine with Android Auto, no pause of music by any notification or Waze directions.
Click to expand...
Click to collapse
Hello everyone,
A month ago, I bought a stereo with Android 11 that has Zlink 5.2.2 installed, and I used it so far with an iPhone 8 until I get the Android phone I had just bought. Everything was fine with Carplay, I used Waze and Youtube Music simultaneously and had no problems.
Once I connected my Android phone (Oneplus 9 Pro) to the stereo with Android Auto wireless, the glitches started. The music plays fine, and Waze works perfectly, but when there is any kind of notification, when it ends, the music is muted. To continue with the music, I have to stop and play it again, then the music volume comes back. If there is another notification (when the music is "muted"), the music comes to be heard slightly, but as soon as the notification ends it goes back to mute. I know it is muted because if I let the song run, and it finishes it goes to the next song (HUD) but it is still not heard.
I have looked to see if this problem was solved in any forum and only found these two:
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86059821
https://forum.xda-developers.com/t/zlink-connection-issue.4173307/post-86139335
I make a specific article for this issue because these two answers are in an article that is not specific to this problem.
If anyone can provide a solution to this issue, I would greatly appreciate it.
Data:
- Android 11 (stereo and mobile)
- Zlink 5.2.2
- Android Auto 7.4.120744-release.daily
If you need more data, let me know. I'm new with this app, so bear with me.
Click to expand...
Click to collapse
everybody here who has a KSW unit attached is the latest zlink update it works but it sucks at HD
is someone fixed the issue ?
otherwise i tried to install the v5.2.68 but i am blocked on the activation screen

Categories

Resources