S7 edge sm g935fd completely dead! Hard brick! Help! - Samsung Galaxy S7 Edge Questions and Answers

Hi guys,
so heres the full story :
i plug in one of my usb drives through the OTG and my mobile suddenly hangs, i press the power off button just once to make the screen go to home but suddenly after the screen goes black a blue screen appears and it starts saying "installing update" and then "erasing data" after that it goes black so i try and go into the recovery and this it what it says
No support single sku
supported api - 3
dm- verify error
E : failed to mount / system (invalid argument)
so seeing after this i figured i had to flash the phone with stock rom (i had nougat 7.0 and flashed the same) and did the flash, flashing took around 20 mins which was unusual and after the flashing was complete it went automatically to the recovery (even though it shouldnt go to recovery just boot normally)
and said no command but then suddenly it send the following the command like reboot , wipe cache etc came up and this is what was written below :
No support single sku
supported api - 3
# manual mode #
-- Applying multi csc--
-- Applied the csc code : ECT
successfully applied multi csc
successfully verify for dmverify hash tree
after reading successfully verify for dmverify hash tree , i thought everything was ok so i did the reboot now and it got stuck at the samsung logo with the blue notification light beeping for around 45mins.
i searched and found that the cache should be cleared , i went to the recovery and wiped the cache and mind that even while going to the recovery and while doing the wipe cache the blue dot notification light was still on which is very very strange , wiping the cache took another 30mins , after the wipe cache completed it went back to the blue screen and said installing update and then it said the same above thing till applied the csc code : est and then suddenly the screen went black
now i dont know if it went black because of low battery or just got bricked , it just went black
i tried powering it on , it didnt turn on but then suddenly it turned on with the screen completely scrambled (will put a pic of it), this happened 2 or 3 times till the phone got completely dead
in case u are wondering how i remember all the steps i was making a video while doing everything
soo guys any help at all is highly appreciated , i have over 7000 contacts and over 31gb of data , mobile was of 32gb capacity.
i am pretty sure this problem is very rare in the way it happened like 2omins to flash , 45mins at the logo screen, blue light on even while clearing the cache and on the recovery screen
i suspect my usb had some kind of virus or malware which suddenly hanged my phone and started this.
plus the day before this happened the phone was really heating up.
also let me know please if any of you guys know anyone who has fixed this problem and recovered all the data.
i live in dubai, i will leave my whatsapp number also below
+971 56 910 23 69
Thanks so much
PS i cant find a way to post the scrambled image up, i am new here

Related

Verizon Lg g2 stuck in bootloop

So for a few weeks now, my phone has been having bootloop issues. I've been trying to fix it on my own, but no luck so far.
I can get it into download mode. Up until I tried to restore it to its stock version via the User Tool, I could get it to the factory reset options, which led to the options to wipe cache, reboot, etc. However, none of those options worked. When I attempted to reset to factory settings, I got the "dead" green android with the red triangle. Then the screen goes black and starts bootlooping again.
Once in awhile I can manage to turn it on after having it turned off for hours, or even days and it works like normal, except that if I lock it or turn it off it will end up restarting and starting to bootloop again. Which is bad seeing as it drains somewhat fast due to being overheated while having the screen constantly on.
As for my experience trying to use update recovery, it gets to the downloading part then stops and gives me this message "[011.700.147.062.092]??? ??? ? ? ????". I don't even know if I am using the correct stock rom for my phone, since I only know its MEID and model name.
do u resolved this, i have the same problem

S7 EDGE bricked or hardware failure?

My S7 edge had been acting weirdly for a few weeks, things like random restarts once a few days so I didn't pay much attention and over excessively heating up to 50/55 degrees (I usually checked the temperature through CPU_Z), and just a few hours ago I ran into problems like the phone restarting on its own, never getting past the samsung logo on boot, so I did the normal thing everyone else would do and just factory reset the device through recovery mode, a point to add here the device took an absolute age to load into recovery mode, this wasn't a case of bad key combination or anything like that, the device would load this the dmverity tree hash verification thing and sit there for a good 2-3 mins which is unusual, same thing happens with factory reset takes an absolute age and comes back with the following text-:
"E: format_volume: make ext4 failed on /dev/block/platform/155a0000.ufs/by-name/USERDATA with 1(I/O error)
-- Set Factory Reset done...
Data wipe failed."
booting up the device in this state would show up with an error "Device storage corrupt" with a " reset device" button in the bottom of the screen which didn't respond to any touches which was weird as well because holding the power button and then selecting the power off option worked with no issues so it wasn't an issue with the touchscreen.
searching for a solution on google led me to flash a official firmware that I downloaded from updato, just a heads up my device has never been tampered with or had any kind of software modifications this includes flashing any roms or even official firmwares before, so I download the firmware and flashed it as usual this is the firmware that I flashed through odin 3.12.3 firmware version was G935FOJV1DQAV also my device model is SM-G935FD while the firmware I flashed was for SM-G935F but this shouldn't be an issue because when I usually got updates over the air on the device they would be for SM-G935F so if there were any issues with this they should have popped up a long time ago, so everything went smoothly and the phone booted up again as usual, did the initial setup and adding accounts, recovery everything, hooked up the charger and left the phone to download all the necessary stuff through samsung and google cloud recovery, comeback after a few minutes to find that the device just wouldn't respond to the power button or the home button to wake the device up but the led on the phone was flashing in blue color which means I did receive some notifications, so I hard reset the phone by holding down power+volume down key, same issues pop up like before the firmware I flashed getting stuck on the boot samsung logo, went back to recovery to do another factory reset again it keeps freezing on the dm-verity tree hash thing, but this time the factory reset happens properly with no errors, but the device doesn't boot up at all, gets stuck on the samsung logo and the led on top starts flashing in several different colors, just like when you boot up a brand new S7 edge.
As a last ditch effort I try initializing the device through smart switch, everything goes normally but when the flashing process starts it gets stuck on 7% indefinitely, tried everything else but to no avail, tried flashing through odin again but it gets stuck on the same point as smart switch, tried installing the firmware in parts through odin again gets stuck on the same point when flashing AP but other parts get installed without any problems, download mode boots up fine, recovery mode now boots up very slowly with a dm-verity error "E:failed to mount / system (invalid argument).
I have 1 month warranty left on my S7 edge from where I purchased it, I want to send it back for a refund or a replacement but the only thing thats kind of worrying me is that in download mode the knox switch hasn't been tripped still shows 0 (0*000), but shows system status as custom, will this effect my warranty claim if they check my device?
TreekoX said:
My S7 edge had been acting weirdly for a few weeks, things like random restarts once a few days so I didn't pay much attention and over excessively heating up to 50/55 degrees (I usually checked the temperature through CPU_Z), and just a few hours ago I ran into problems like the phone restarting on its own, never getting past the samsung logo on boot, so I did the normal thing everyone else would do and just factory reset the device through recovery mode, a point to add here the device took an absolute age to load into recovery mode, this wasn't a case of bad key combination or anything like that, the device would load this the dmverity tree hash verification thing and sit there for a good 2-3 mins which is unusual, same thing happens with factory reset takes an absolute age and comes back with the following text-:
"E: format_volume: make ext4 failed on /dev/block/platform/155a0000.ufs/by-name/USERDATA with 1(I/O error)
-- Set Factory Reset done...
Data wipe failed."
booting up the device in this state would show up with an error "Device storage corrupt" with a " reset device" button in the bottom of the screen which didn't respond to any touches which was weird as well because holding the power button and then selecting the power off option worked with no issues so it wasn't an issue with the touchscreen.
searching for a solution on google led me to flash a official firmware that I downloaded from updato, just a heads up my device has never been tampered with or had any kind of software modifications this includes flashing any roms or even official firmwares before, so I download the firmware and flashed it as usual this is the firmware that I flashed through odin 3.12.3 firmware version was G935FOJV1DQAV also my device model is SM-G935FD while the firmware I flashed was for SM-G935F but this shouldn't be an issue because when I usually got updates over the air on the device they would be for SM-G935F so if there were any issues with this they should have popped up a long time ago, so everything went smoothly and the phone booted up again as usual, did the initial setup and adding accounts, recovery everything, hooked up the charger and left the phone to download all the necessary stuff through samsung and google cloud recovery, comeback after a few minutes to find that the device just wouldn't respond to the power button or the home button to wake the device up but the led on the phone was flashing in blue color which means I did receive some notifications, so I hard reset the phone by holding down power+volume down key, same issues pop up like before the firmware I flashed getting stuck on the boot samsung logo, went back to recovery to do another factory reset again it keeps freezing on the dm-verity tree hash thing, but this time the factory reset happens properly with no errors, but the device doesn't boot up at all, gets stuck on the samsung logo and the led on top starts flashing in several different colors, just like when you boot up a brand new S7 edge.
As a last ditch effort I try initializing the device through smart switch, everything goes normally but when the flashing process starts it gets stuck on 7% indefinitely, tried everything else but to no avail, tried flashing through odin again but it gets stuck on the same point as smart switch, tried installing the firmware in parts through odin again gets stuck on the same point when flashing AP but other parts get installed without any problems, download mode boots up fine, recovery mode now boots up very slowly with a dm-verity error "E:failed to mount / system (invalid argument).
I have 1 month warranty left on my S7 edge from where I purchased it, I want to send it back for a refund or a replacement but the only thing thats kind of worrying me is that in download mode the knox switch hasn't been tripped still shows 0 (0*000), but shows system status as custom, will this effect my warranty claim if they check my device?
Click to expand...
Click to collapse
Having the same issue. anyone help? did you manage to solve this issue?

S4 issues with recovery and screen

I have some issues with my s4 a few weeks ago it started
first i couldnt change my brightness right after that my boot animation disappear and now i cant enter my recovery i found that out because today i tryed to delete everything and install new in hope that the bugs will go away but then this
i think i can go in to the recovery but my screen does not show it but i am not shure about that.
also after i tryed to install 5.1.0 android to maybe get in recovery, (befor i had 4.4.4 installed because i have a weird input lag in 5.1.0) i noticed that the screen is flickering but only in 5.1.0 in 4.4.4 i never had this
what i already tryed: install I9515XXU1ANK2_I9515YXY1ANL2_I9515XXU1ANK2_HOME.tar and I9515XXU1BPK3_I9515YXY1BPK2_I9515XXU1BPK3_HOME.tar ,
adb reboot to recovery , tryed to change kernel with app but i think that didnt worked
installed twrp, cmw both didnt worked
please help me to fix my phone
Does the phone boot properly to the desktop after flashing the latest stock ROM?
yes it boots normal
btw little update i found out i can use my recovery my screen just dont show any thing
i found that out because everytime i was downgrading from 5.1.0 to 4.4.2 i had to do wipe data or it wont boot
i tryed to go in recovery and go 3 down (wipe data) and then 7 down (yes) just with youtube videos and it worked before the wipe my phone does not start on 4.4.2
that means that my recovery is working but screen just doesnt show it
it doesnt show anything but the white samsung logo, normal system, downloadmode
at any other time my display ist blank
as an example when i turn it on i see the white logo then screen turns blank i hear the bootup sound, after 15 sec screen goes black and when i press unlock i can normal use the phone
but why is it blank while booting and in recovery and also is a bit flickering when phone is turned on normal
Recovery works on stock lollipop?
yes recovery works but screen does not when i enter it
the screen is turned on but it only shows black
same thing when the phone boots up screen in turned on but only shows black untill the phone is booted then screen works but is flickring a tiny bit
i called in a repair shop they told me maybe the backlight control is broken???
because i also cant change my brightness its set to max and doesent get darker when i move the slider

NOTE 4 N910F Bootlooop, Shuts down, Blue Light

Hi
I am stuck with Pulsing blue LED and the "Powered by Android" screen,
have access to both the recovery and the Odin Mode,
I also have Odin (version 3.13) on my computer along with TWRP (3.1.1 trlte and 3.2.1 version)
My device is a Samsung Galaxy Note 4 N910F bought in shop, no special carrier. It was bought in Belgium.
I have tried everything that I have read. The furthest that I can go is the Second Samsung Logo with the Flashing Light
Whenever I try to Flash the stock Firmware for my N910F, everything goes well in Odin but then when the phone reboots, it (sometimes) install the system update until 30% then shows erasing then either crashes right there and then or load the system update bar, completes it then shuts down.
In between I do perform a wipe of the cache and factory reset of course. (in both normal and TWRP recovery)
Whatever I do, at some point, my phone either gets stuck in a bootloop, freezes with the LED light or shuts down.
Oh and I can transfer files directly to the internal storage with no issue
Please help a brother out lol. I have spent the last 4 days looking for a way to fix this. To no avail.
And I have also proceeded to use different batteries.
I have the exact same problem. Doesn't anyone have an idea?
Mugiwara7 said:
Hi
I am stuck with Pulsing blue LED and the "Powered by Android" screen,
have access to both the recovery and the Odin Mode,
I also have Odin (version 3.13) on my computer along with TWRP (3.1.1 trlte and 3.2.1 version)
My device is a Samsung Galaxy Note 4 N910F bought in shop, no special carrier. It was bought in Belgium.
I have tried everything that I have read. The furthest that I can go is the Second Samsung Logo with the Flashing Light
Whenever I try to Flash the stock Firmware for my N910F, everything goes well in Odin but then when the phone reboots, it (sometimes) install the system update until 30% then shows erasing then either crashes right there and then or load the system update bar, completes it then shuts down.
In between I do perform a wipe of the cache and factory reset of course. (in both normal and TWRP recovery)
Whatever I do, at some point, my phone either gets stuck in a bootloop, freezes with the LED light or shuts down.
Oh and I can transfer files directly to the internal storage with no issue
Please help a brother out lol. I have spent the last 4 days looking for a way to fix this. To no avail.
And I have also proceeded to use different batteries.
Click to expand...
Click to collapse

Galaxy S7 edge stuck randomly in boot.

Hello,
So i was using my phone in a very normal usage, i dont recall installing any third party app or anything on that night. I last used my phone at arround 3am on Tuesday, woken up at about 5am and found it completely black with the blue led lighting up. It didnt respond to any kind of buttons combinations, it stayed like that until the battery was dead. For now I tried EVERYTHING, from flashing custom roms to downgrading or upgrading stock roms from sammobile. While flashing a rom, the phone reboots then gets stuck in erasing screen, forcing a reboot will make it return to its previous status only..
I have to signal here that i have frp lock OFF , and i guess that it is the main issue here is that the automatic update to oreo failed, i tried the solutions given on this tread : https://www.google.com/url?hl=fr&q=...870000&usg=AFQjCNEcdRjZySPCbnAulqAEIQDrHLWGRQ, but my phone wont reconnect after flashing the boot file, just gets stuck on the s7 edge screen again.
I have the exynos variant of the model and I live in Morocco !
UPDATE :
When i get to flash with a stock rom using odin , without the auto reboot option, i get the green pass and when I restart the phone manually it reboots normally and gets stuck on the samsung logo then reboots again to a black screen and the blue led again just like it was before the flash .... please help

Categories

Resources