Related
Hi, I tested most of the tutorials I saw on this page, including this one:
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
But I can't recover my Moto G4 Plus.
The qboot_log is as follows:
**** Log buffer [000001] 2017-05-29_17:16:12 ****
[ 0.000] Opening device: \\.\COM26
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 2418 (0x972)
[ 0.004] ...cpu.sn = 21868753 (0x14db0d1)
[ 0.004] Opening singleimage
[ 0.270] Loading package
[ 0.276] ...filename = singleimage.pkg.xml
[ 0.280] Loading programmer
[ 0.281] ...filename = programmer.mbn
[ 0.281] Sending programmer
[ 0.502] Handling things over to programmer
[ 0.502] Identifying CPU version
[ 0.506] Waiting for firehose to get ready
[ 61.162] Waiting for firehose to get ready
[121.436] ...MSM8952 unknown
[121.436] Determining target secure state
[121.440] Waiting for firehose to get ready
[182.473] ...secure = no
[182.495] Flashing GPT...
[182.496] Flashing partition:0 with gpt_main0.bin
[182.496] Initializing storage
[182.502] Waiting for firehose to get ready
[244.409] Configuring device...
[244.414] Waiting for firehose to get ready
[305.562] Waiting for firehose to get ready
[367.782] Waiting for firehose to get ready
[430.850] Waiting for firehose to get ready
[491.546] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->fh_send_fmt()->send_command
()->device_write()->IO error
[491.546] Check qboot_log.txt for more details
[491.547] Total time: 491.548s
[491.548]
[491.548] qboot version 3.40
[491.548]
[491.548] DEVICE {
[491.548] name = "\\.\COM26",
[491.548] flags = "0x64",
[491.548] addr = "0x22FE6C",
[491.548] sahara.current_mode = "0",
[491.548] api.buffer = "0x1A60020",
[491.548] cpu.serial = "21868753",
[491.548] cpu.id = "2418",
[491.548] cpu.sv_sbl = "0",
[491.548] cpu.name = "MSM8952",
[491.548] storage.type = "eMMC",
[491.548] sahara.programmer = "programmer.mbn",
[491.548] module.firehose = "0x3AF2B8",
[491.548] cpu.ver = "0",
[491.548] cpu.vername = "unknown",
[491.548] api.bnr = "0x19B2340",
[491.548] }
[491.548]
[491.548]
[491.548] Backup & Restore {
[491.548] num_entries = 0,
[491.548] restoring = "false",
[491.548] backup_error = "not started",
[491.548] restore_error = "not started",
[491.548] }
[491.548]
Click to expand...
Click to collapse
arizaseba said:
Hi, I tested most of the tutorials I saw on this page, including this one:
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
But I can't recover my Moto G4 Plus.
The qboot_log is as follows:
Click to expand...
Click to collapse
Estou com esse mesmo problema.. Não consigo reviver meu moto g4
I'm having this same problem .. I can not revive my g4 bike
[ 0.000] Opening device: \\.\COM7
[ 0.000] Detecting device
[ 0.000] ...cpu.id = 2418 (0x972)
[ 0.000] ...cpu.sn = 13573873 (0xcf1ef1)
[ 0.000] Opening singleimage
[ 0.016] Loading package
[ 0.016] ...filename = singleimage.pkg.xml
[ 0.016] Loading programmer
[ 0.016] ...filename = programmer.mbn
[ 0.016] Sending programmer
[ 0.234] Handling things over to programmer
[ 0.234] Identifying CPU version
[ 0.234] Waiting for firehose to get ready
[ 60.618] Waiting for firehose to get ready
[120.979] ...MSM8952 unknown
[120.979] Determining target secure state
[120.979] Waiting for firehose to get ready
[181.357] ...secure = no
[181.357] Flashing GPT...
[181.388] Flashing partition:0 with gpt_main0.bin
[181.388] Initializing storage
[181.404] Waiting for firehose to get ready
[241.761] Configuring device...
[264.166] Waiting for firehose to get ready
[324.496] Waiting for firehose to get ready
[384.643] Waiting for firehose to get ready
[444.723] Waiting for firehose to get ready
[504.808] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[504.808] Check qboot_log.txt for more details
[504.808] Total time: 504.808s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
plz help me..
go get new device
I tried to update my phone to Android N, but once the update installed, it went onto a black screen and will not turn on now.
When connected to the computer it says - qualcomm hs-usb qdloader 9008
I cant get anything loaded through pressing the volume down and power key.
I have tried to follow the link below but can't get blank-flash to work, I only get to this
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5F2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:07 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5A2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-08-23_07:24:45 ****
[ 0.000] Opening device: \\.\COM3
[ 0.000] Detecting device
[ 0.000] ...cpu.id = 2418 (0x972)
[ 0.000] ...cpu.sn = 13126848 (0xc84cc0)
[ 0.000] Opening singleimage
[ 0.219] Loading package
[ 0.234] ...filename = singleimage.pkg.xml
[ 0.234] Loading programmer
[ 0.234] ...filename = programmer.mbn
[ 0.234] Sending programmer
[ 0.469] Handling things over to programmer
[ 0.469] Identifying CPU version
[ 0.469] Waiting for firehose to get ready
[ 60.980] Waiting for firehose to get ready
[121.447] ...MSM8952 unknown
[121.447] Determining target secure state
[121.463] Waiting for firehose to get ready
[181.889] ...secure = no
[181.904] Flashing GPT...
[181.920] Flashing partition:0 with gpt_main0.bin
[181.920] Initializing storage
[181.936] Waiting for firehose to get ready
[242.406] Configuring device...
[242.406] Waiting for firehose to get ready
[302.883] Waiting for firehose to get ready
[363.337] Waiting for firehose to get ready
[423.753] Waiting for firehose to get ready
[484.166] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[484.166] Check qboot_log.txt for more details
[484.166] Total time: 484.166s
[484.197]
[484.197] qboot version 3.40
[484.197]
[484.197] DEVICE {
[484.197] name = "\\.\COM3",
[484.197] flags = "0x64",
[484.197] addr = "0x61FE5C",
[484.197] sahara.current_mode = "0",
[484.197] api.buffer = "0x1388020",
[484.197] cpu.serial = "13126848",
[484.197] cpu.id = "2418",
[484.197] cpu.sv_sbl = "0",
[484.197] cpu.name = "MSM8952",
[484.197] storage.type = "eMMC",
[484.197] sahara.programmer = "programmer.mbn",
[484.197] module.firehose = "0x7389B8",
[484.197] cpu.ver = "0",
[484.197] cpu.vername = "unknown",
[484.197] api.bnr = "0x834860",
[484.197] }
[484.197]
[484.197]
[484.197] Backup & Restore {
[484.197] num_entries = 0,
[484.197] restoring = "false",
[484.197] backup_error = "not started",
[484.197] restore_error = "not started",
[484.197] }
[484.197]
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
Please help
Thank you
Hello.
I believe you'll need the updated blankflash.
Follow this guide - https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
I would try holding power key and vol down (without it being connected to PC, make sure it has enough battery) for as long as needed to reboot in to normal bootloader. This can be up to 5-10 mins
Hard Bricked Moto G4 Plus
Kindly send your mail ID and I will forward you all the files
Moderator Edit: "Kindly" don't ask anyone to do this.
Members are advised to avoid this kind of garbage.
why are you giving your Email ID for no whatever reason. Blankflash files are available on the Thread
@ncfcdaniel if you dont know which thread it is, then here is the link : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Hi, I post the updates of the contact with ARYKTECH https://web.telegram.org/#/[email protected]
I buy in http://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html the blankflash file for bricked MXP when downgrade of Nougat Stable to MM and install the OTA of 2017/01.
2017/11/02:
I pay 10 USD with paypal and wait...
2017/11/03
I receive the files hours later in google drive:
https://forum.xda-developers.com/attachment.php?attachmentid=4323100&stc=1&d=1509823657
Information of the folders:
https://dl.xda-developers.com/4/3/2....png?key=lb74mdfB79Bje9bOnMbqjA&ts=1509823783
https://dl.xda-developers.com/4/3/2....png?key=gKWllZVzD1gzMKR5DoHOoA&ts=1509823783
The version send me is the same like the soaktest:
lux_retasia_ds_userdebug_7.1.1_NPD26.35_eng.praseed.170526.190746_intcfg_test-keys_retasiaall_03
When I execute the blank-flash.bat of the folders have a error.
C:\mxp blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.003s]
greeting device for command mode
OKAY [ 0.001s]
identifying device
...serial = 0x15C3716
...chip-id = 0x90B (MSM8939)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
FAILED (blank-flash:sahara-transfer-image:send-image:error reading packet)
C:\mxp blankflash\blankflash>pause
Presione una tecla para continuar . . .
----
C:\mxp blankflash\Err_blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x15C3716
...chip-id = 0x90B (MSM8939)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.003s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
OKAY [ 0.047s]
flashing singleimage
...protocol = sdl
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
C:\mxp blankflash\Err_blankflash>pause
2017/11/04:
Right now i wait a new version.... who promised me to send.
As I guessed they began with bull****, assuming naive you have old security there )
I think they got nothing. Motorola leak strikes like a miracle, but not SO often.
Let us know if any of their methods work!
2017/11/05 send the version 3 of blankflash:
ERROR
**** Log buffer [000001] 2017-11-05_14:40:23 ****
[ -0.000] Opening device: \\.\COM8
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 2315 (0x90b)
[ -0.000] ...cpu.sn = 60355909 (0x398f545)
[ -0.000] Opening singleimage
[ -0.000] ERROR: error opening singleimage
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: 0.016s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM8",
[ -0.000] flags = "0x64",
[ -0.000] addr = "0x22FE6C",
[ -0.000] sahara.current_mode = "3",
[ -0.000] api.buffer = "0x1A00020",
[ -0.000] cpu.serial = "60355909",
[ -0.000] cpu.id = "2315",
[ -0.000] cpu.sv_sbl = "0",
[ -0.000] api.bnr = "0x612FE8",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
Blankflash files I asks for version 3 instead of 4
soyguris said:
2017/11/05 send the version 3 of blankflash:
ERROR
**** Log buffer [000001] 2017-11-05_14:40:23 ****
[ -0.000] Opening device: \\.\COM8
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 2315 (0x90b)
[ -0.000] ...cpu.sn = 60355909 (0x398f545)
[ -0.000] Opening singleimage
[ -0.000] ERROR: error opening singleimage
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: 0.016s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM8",
[ -0.000] flags = "0x64",
[ -0.000] addr = "0x22FE6C",
[ -0.000] sahara.current_mode = "3",
[ -0.000] api.buffer = "0x1A00020",
[ -0.000] cpu.serial = "60355909",
[ -0.000] cpu.id = "2315",
[ -0.000] cpu.sv_sbl = "0",
[ -0.000] api.bnr = "0x612FE8",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
Click to expand...
Click to collapse
I tried to flash blank flash files from Moto G4 Plus forum and it says, expected version 3 instead of 4 and it quit. I believe you have version 3 blank flash files. Waiting for you to successfully unbrick your Moto X Play, so that I can also get the same files and try to unbrik my MXP, fingers crossed!
2017/11/07: I escalated the case to Paypal and gave me back the money.
Only Motorola have the solution.
Can I test version 3 file on my MXP?
soyguris said:
2017/11/07: I escalated the case to Paypal and gave me back the money.
Only Motorola have the solution.
Click to expand...
Click to collapse
Could you please share the version 3 Blank Flash Files and let me test it on my MXP?
Lord of Hell said:
Could you please share the version 3 Blank Flash Files and let me test it on my MXP?
Click to expand...
Click to collapse
The files attached.
None of them works
done!
it works!??
I tested on my moto x play xt1563 and gave the same errors It did not work.
Sorry for english, i'm using google translate
Not working is a scam
Enviado desde mi XT1563 mediante Tapatalk
Hello, good afternoon (Chilean time), in Latin American forums there is little information about broken cell phones.
Putting my hand in my motorola xt1621 will change all your firmwares values starter manager, etc., (values that I no longer remember) my cell phone to update to 7.0 if not bad memory and no longer set more.
Only has a black LED white light and when connecting to my PC it is not recognized 'Qualcomm' 'read from here it took me to start my PC a failure test, I detect drivers by the port name: Qualcomm HS-USB QDLoader 9008 (COM4), when using '' blank-flahs '' it leaves me the following log
**** Log buffer [000001] 2017-04-05_01:43:26 ****
[ 0.000] Opening device: \\.\COM5
[180.071] Detecting device
[543.084] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[543.084] Check qboot_log.txt for more details
[543.084] Total time: 543.084s
[543.084]
[543.084] qboot version 3.40
[543.084]
[543.084] DEVICE {
[543.084] name = "\\.\COM5",
[543.084] flags = "0x64",
[543.084] addr = "0x28FE6C",
[543.084] api.bnr = "0x5A2DE8",
[543.084] }
[543.084]
[543.084]
[543.084] Backup & Restore {
[543.084] num_entries = 0,
[543.084] restoring = "false",
[543.084] backup_error = "not started",
[543.084] restore_error = "not started",
[543.084] }
[543.084]
**** Log buffer [000001] 2017-04-05_01:53:47 ****
[ -0.000] Opening device: \\.\COM5
[130.744] ERROR: device_open()->error opening device
[130.744] Check qboot_log.txt for more details
[130.744] Total time: 130.744s
[130.744]
[130.744] qboot version 3.40
[130.744]
[130.744] DEVICE {
[130.744] name = "\\.\COM5",
[130.744] flags = "0x60",
[130.744] addr = "0x28FE6C",
[130.744] api.bnr = "0x762DE8",
[130.744] }
[130.744]
[130.744]
[130.744] Backup & Restore {
[130.744] num_entries = 0,
[130.744] restoring = "false",
[130.744] backup_error = "not started",
[130.744] restore_error = "not started",
[130.744] }
[130.744]
**** Log buffer [000001] 2017-04-05_02:16:13 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x542DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:18:42 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:18:59 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5C2E08",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:19:13 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0xe4",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5E2E08",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:28:27 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM5",
[ 0.000] flags = "0x40",
[ 0.000] addr = "0x28FE6C",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2017-04-05_02:38:02 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM5",
[ 0.000] flags = "0x40",
[ 0.000] addr = "0x28FE6C",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2017-04-05_02:38:16 ****
[ -0.000] Opening device: \\.\COM5
[180.368] Detecting device
[543.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[543.380] Check qboot_log.txt for more details
[543.380] Total time: 543.396s
[543.380]
[543.380] qboot version 3.40
[543.380]
[543.380] DEVICE {
[543.380] name = "\\.\COM5",
[543.380] flags = "0x44",
[543.380] addr = "0x28FE6C",
[543.380] }
[543.380]
**** Log buffer [000001] 2017-04-05_02:58:06 ****
[ -0.000] Opening device: \\.\COM5
[180.212] Detecting device
[543.240] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[543.240] Check qboot_log.txt for more details
[543.240] Total time: 543.240s
[543.240]
[543.240] qboot version 3.40
[543.240]
[543.240] DEVICE {
[543.240] name = "\\.\COM5",
[543.240] flags = "0x44",
[543.240] addr = "0x28FE6C",
[543.240] }
[543.240]
**** Log buffer [000001] 2017-04-05_09:27:09 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.016s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM5",
[ 0.000] flags = "0x40",
[ 0.000] addr = "0x28FE6C",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2017-04-05_09:27:17 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.044] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.044] Check qboot_log.txt for more details
[ 4.044] Total time: 4.044s
[ 4.045]
[ 4.045] qboot version 3.40
[ 4.045]
[ 4.045] DEVICE {
[ 4.045] name = "\\.\COM5",
[ 4.045] flags = "0x44",
[ 4.045] addr = "0x28FE6C",
[ 4.045] }
[ 4.045]
**** Log buffer [000001] 2017-04-06_00:06:39 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:06:49 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:05 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:32 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0xA72DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:52 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.087s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x952DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:57 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x2D2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:02 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5F2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:07 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5A2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2018-05-27_19:15:58 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.109s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x2C2888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:17:39 ****
[ -0.000] Opening device: \\.\COM4
[ 0.001] ERROR: device_open()->error opening device
[ 0.002] Check qboot_log.txt for more details
[ 0.009] Total time: 0.010s
[ 0.009]
[ 0.009] qboot version 3.40
[ 0.009]
[ 0.009] DEVICE {
[ 0.010] name = "\\.\COM4",
[ 0.010] flags = "0x60",
[ 0.010] addr = "0x28FE6C",
[ 0.010] api.bnr = "0x8D2888",
[ 0.010] }
[ 0.010]
[ 0.010]
[ 0.010] Backup & Restore {
[ 0.010] num_entries = 0,
[ 0.010] restoring = "false",
[ 0.010] backup_error = "not started",
[ 0.010] restore_error = "not started",
[ 0.010] }
[ 0.010]
**** Log buffer [000001] 2018-05-27_19:18:32 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x662888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:18:36 ****
[ -0.000] Opening device: \\.\COM4
[ -0.000] ERROR: device_open()->error opening device
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: -0.000s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM4",
[ -0.000] flags = "0x60",
[ -0.000] addr = "0x28FE6C",
[ -0.000] api.bnr = "0xA52888",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
**** Log buffer [000001] 2018-05-27_19:20:09 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x482888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:20:18 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x512888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:20:20 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x5A2888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
Click to expand...
Click to collapse
I can not do, see or install anything.
Click to expand...
Click to collapse
What blankflash are you using? Is it the blankflash from this guide here: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Also, verify you are using the original USB cable or a high quality USB data cable for connecting your device, and that you have the Motorola USB drivers installed on your computer: https://support.motorola.com/us/en/drivers You may also wish to disable driver signature enforcement if you are running Windows 10 or 8.1 https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Sounds like you downgraded your stock firmware by flashing an older firmware and then proceeded to have your bootloader corrupted by an old OTA update. If you do get your device working, please only flash the newest firmware we have available/for your device, or if you do flash old stock firmware, please do not use OTA updates. I'm not sure what firmware is the latest for retla/Chile devices, but have a look at this thread for the April 2018 firmware (again, it's up to you to verify if this is the firmware you need) https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
My Motorola MOTO G6 plus is dead
The model is the XT1926-3 and suddenly the screen "freezed" while I was using it. I restarted the phone by holding down the power button and from that moment it does not turn on anymore. Completely black screen. With the "power + volume -" keys I can't enter recovery.
So I tried to unbrick with the blankflash loading, but it always gives me this error:
[ 0.000] Opening device: \\.\COM4
[ 0.014] Detecting device
[ 0.016] ...cpu.id = 172 (0xac)
[ 0.016] ...cpu.sn = 2974230727 (0xb14728c7)
[ 0.016] Opening singleimage
[ 0.020] Loading package
[ 0.021] ...filename = pkg.xml
[ 0.022] Loading programmer
[ 0.022] ...filename = programmer.elf
[ 0.022] Sending programmer
[ 0.209] Handling things over to programmer
[ 0.209] Identifying CPU version
[ 0.209] Waiting for firehose to get ready
[ 3.221] ...SDM630 1.0
[ 3.221] Determining target secure state
[ 3.223] ...secure = yes
[ 3.238] Configuring device...
[ 3.242] Flashing GPT...
[ 3.242] Flashing partition with gpt.bin
[ 3.244] Initializing storage
[ 8.440] Target NAK!
[ 8.441] ...ERROR: Failed to open the SDCC Device slot 0 partition 0
[ 8.441] ...ERROR: Failed to open the device 1 slot 0 partition 0
[ 8.441] ...INFO: Device type 1, slot 0, partition 0, error 0
[ 8.441] ...WARN: Get Info failed to open 1 slot 0, partition 0, error 0
[ 8.441] ...ERROR: Failed to get device info slot:0artition:0
[ 8.441] ...GetStorageInfo Failed - storage_device_get_info() returned FALSE
[ 8.441] ...ERROR 14: Line 1281: HANDLE_STORAGE_INFO_FAILURE
[ 8.442] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->NAK
[ 8.442] Check qboot_log.txt for more details
[ 8.443] Total time: 8.444s
[ 8.443]
[ 8.443] qboot version 3.86
[ 8.443]
[ 8.443] DEVICE {
[ 8.443] name = "\\.\COM4",
[ 8.443] flags = "0x144",
[ 8.443] addr = "0x62FD54",
[ 8.443] sahara.current_mode = "0",
[ 8.443] api.buffer = "0xFB8020",
[ 8.443] cpu.serial = "2974230727",
[ 8.443] cpu.id = "172",
[ 8.443] cpu.sv_sbl = "1",
[ 8.443] cpu.name = "SDM630",
[ 8.443] storage.type = "eMMC",
[ 8.443] sahara.programmer = "programmer.elf",
[ 8.443] module.firehose = "0x7D1880",
[ 8.443] api.firehose = "0x7D1950",
[ 8.443] cpu.ver = "256",
[ 8.443] cpu.vername = "1.0",
[ 8.443] fh.max_packet_sz = "1048576",
[ 8.443] fh.storage_inited = "1",
[ 8.443] provisioning_may_hang = "true",
[ 8.444] }
[ 8.444]
Click to expand...
Click to collapse
I tried with 3 different blackflashes on 2 different PCs, also changing the USB port, but nothing: |
Do you have a working blankflash? Some advice?
Should I use it as a paperweight?
Try to hold the power button for 1-2 minutes.
ChIP_83 said:
My Motorola MOTO G6 plus is dead
The model is the XT1926-3 and suddenly the screen "freezed" while I was using it. I restarted the phone by holding down the power button and from that moment it does not turn on anymore. Completely black screen. With the "power + volume -" keys I can't enter recovery.
So I tried to unbrick with the blankflash loading, but it always gives me this error:
I tried with 3 different blackflashes on 2 different PCs, also changing the USB port, but nothing: |
Do you have a working blankflash? Some advice?
Should I use it as a paperweight?
Click to expand...
Click to collapse
What shows up in your device manager?
And send us the qboot_log.txt
Did you do any overclocking or modding in your phone before this happened?
ChIP_83 said:
My Motorola MOTO G6 plus is dead
The model is the XT1926-3 and suddenly the screen "freezed" while I was using it. I restarted the phone by holding down the power button and from that moment it does not turn on anymore. Completely black screen. With the "power + volume -" keys I can't enter recovery.
So I tried to unbrick with the blankflash loading, but it always gives me this error:
I tried with 3 different blackflashes on 2 different PCs, also changing the USB port, but nothing: |
Do you have a working blankflash? Some advice?
Should I use it as a paperweight?
Click to expand...
Click to collapse
Okay, what does the device manager show the device as, it could be bricked as qualcomm 9008,
The qboot log file could be nice as well,