Bricked after Android N update - Moto G4 Plus Questions & Answers

I tried to update my phone to Android N, but once the update installed, it went onto a black screen and will not turn on now.
When connected to the computer it says - qualcomm hs-usb qdloader 9008
I cant get anything loaded through pressing the volume down and power key.
I have tried to follow the link below but can't get blank-flash to work, I only get to this
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5F2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:07 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5A2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-08-23_07:24:45 ****
[ 0.000] Opening device: \\.\COM3
[ 0.000] Detecting device
[ 0.000] ...cpu.id = 2418 (0x972)
[ 0.000] ...cpu.sn = 13126848 (0xc84cc0)
[ 0.000] Opening singleimage
[ 0.219] Loading package
[ 0.234] ...filename = singleimage.pkg.xml
[ 0.234] Loading programmer
[ 0.234] ...filename = programmer.mbn
[ 0.234] Sending programmer
[ 0.469] Handling things over to programmer
[ 0.469] Identifying CPU version
[ 0.469] Waiting for firehose to get ready
[ 60.980] Waiting for firehose to get ready
[121.447] ...MSM8952 unknown
[121.447] Determining target secure state
[121.463] Waiting for firehose to get ready
[181.889] ...secure = no
[181.904] Flashing GPT...
[181.920] Flashing partition:0 with gpt_main0.bin
[181.920] Initializing storage
[181.936] Waiting for firehose to get ready
[242.406] Configuring device...
[242.406] Waiting for firehose to get ready
[302.883] Waiting for firehose to get ready
[363.337] Waiting for firehose to get ready
[423.753] Waiting for firehose to get ready
[484.166] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[484.166] Check qboot_log.txt for more details
[484.166] Total time: 484.166s
[484.197]
[484.197] qboot version 3.40
[484.197]
[484.197] DEVICE {
[484.197] name = "\\.\COM3",
[484.197] flags = "0x64",
[484.197] addr = "0x61FE5C",
[484.197] sahara.current_mode = "0",
[484.197] api.buffer = "0x1388020",
[484.197] cpu.serial = "13126848",
[484.197] cpu.id = "2418",
[484.197] cpu.sv_sbl = "0",
[484.197] cpu.name = "MSM8952",
[484.197] storage.type = "eMMC",
[484.197] sahara.programmer = "programmer.mbn",
[484.197] module.firehose = "0x7389B8",
[484.197] cpu.ver = "0",
[484.197] cpu.vername = "unknown",
[484.197] api.bnr = "0x834860",
[484.197] }
[484.197]
[484.197]
[484.197] Backup & Restore {
[484.197] num_entries = 0,
[484.197] restoring = "false",
[484.197] backup_error = "not started",
[484.197] restore_error = "not started",
[484.197] }
[484.197]
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
Please help
Thank you

Hello.
I believe you'll need the updated blankflash.
Follow this guide - https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761

I would try holding power key and vol down (without it being connected to PC, make sure it has enough battery) for as long as needed to reboot in to normal bootloader. This can be up to 5-10 mins

Hard Bricked Moto G4 Plus
Kindly send your mail ID and I will forward you all the files
Moderator Edit: "Kindly" don't ask anyone to do this.
Members are advised to avoid this kind of garbage.

why are you giving your Email ID for no whatever reason. Blankflash files are available on the Thread
@ncfcdaniel if you dont know which thread it is, then here is the link : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761

Related

[HELP] Hard Brick / No Bootloader Moto G4 Plus

Hi, I tested most of the tutorials I saw on this page, including this one:
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
But I can't recover my Moto G4 Plus.
The qboot_log is as follows:
**** Log buffer [000001] 2017-05-29_17:16:12 ****
[ 0.000] Opening device: \\.\COM26
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 2418 (0x972)
[ 0.004] ...cpu.sn = 21868753 (0x14db0d1)
[ 0.004] Opening singleimage
[ 0.270] Loading package
[ 0.276] ...filename = singleimage.pkg.xml
[ 0.280] Loading programmer
[ 0.281] ...filename = programmer.mbn
[ 0.281] Sending programmer
[ 0.502] Handling things over to programmer
[ 0.502] Identifying CPU version
[ 0.506] Waiting for firehose to get ready
[ 61.162] Waiting for firehose to get ready
[121.436] ...MSM8952 unknown
[121.436] Determining target secure state
[121.440] Waiting for firehose to get ready
[182.473] ...secure = no
[182.495] Flashing GPT...
[182.496] Flashing partition:0 with gpt_main0.bin
[182.496] Initializing storage
[182.502] Waiting for firehose to get ready
[244.409] Configuring device...
[244.414] Waiting for firehose to get ready
[305.562] Waiting for firehose to get ready
[367.782] Waiting for firehose to get ready
[430.850] Waiting for firehose to get ready
[491.546] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->fh_send_fmt()->send_command
()->device_write()->IO error
[491.546] Check qboot_log.txt for more details
[491.547] Total time: 491.548s
[491.548]
[491.548] qboot version 3.40
[491.548]
[491.548] DEVICE {
[491.548] name = "\\.\COM26",
[491.548] flags = "0x64",
[491.548] addr = "0x22FE6C",
[491.548] sahara.current_mode = "0",
[491.548] api.buffer = "0x1A60020",
[491.548] cpu.serial = "21868753",
[491.548] cpu.id = "2418",
[491.548] cpu.sv_sbl = "0",
[491.548] cpu.name = "MSM8952",
[491.548] storage.type = "eMMC",
[491.548] sahara.programmer = "programmer.mbn",
[491.548] module.firehose = "0x3AF2B8",
[491.548] cpu.ver = "0",
[491.548] cpu.vername = "unknown",
[491.548] api.bnr = "0x19B2340",
[491.548] }
[491.548]
[491.548]
[491.548] Backup & Restore {
[491.548] num_entries = 0,
[491.548] restoring = "false",
[491.548] backup_error = "not started",
[491.548] restore_error = "not started",
[491.548] }
[491.548]
Click to expand...
Click to collapse
arizaseba said:
Hi, I tested most of the tutorials I saw on this page, including this one:
https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
But I can't recover my Moto G4 Plus.
The qboot_log is as follows:
Click to expand...
Click to collapse
Estou com esse mesmo problema.. Não consigo reviver meu moto g4
I'm having this same problem .. I can not revive my g4 bike
[ 0.000] Opening device: \\.\COM7
[ 0.000] Detecting device
[ 0.000] ...cpu.id = 2418 (0x972)
[ 0.000] ...cpu.sn = 13573873 (0xcf1ef1)
[ 0.000] Opening singleimage
[ 0.016] Loading package
[ 0.016] ...filename = singleimage.pkg.xml
[ 0.016] Loading programmer
[ 0.016] ...filename = programmer.mbn
[ 0.016] Sending programmer
[ 0.234] Handling things over to programmer
[ 0.234] Identifying CPU version
[ 0.234] Waiting for firehose to get ready
[ 60.618] Waiting for firehose to get ready
[120.979] ...MSM8952 unknown
[120.979] Determining target secure state
[120.979] Waiting for firehose to get ready
[181.357] ...secure = no
[181.357] Flashing GPT...
[181.388] Flashing partition:0 with gpt_main0.bin
[181.388] Initializing storage
[181.404] Waiting for firehose to get ready
[241.761] Configuring device...
[264.166] Waiting for firehose to get ready
[324.496] Waiting for firehose to get ready
[384.643] Waiting for firehose to get ready
[444.723] Waiting for firehose to get ready
[504.808] ERROR: do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[504.808] Check qboot_log.txt for more details
[504.808] Total time: 504.808s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do_fmt()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
plz help me..
go get new device

Moto G5 Plus Hard Bricked (Like HARD!)

Hello! I got the .6X update and installed it in my Moto G5 PLus, after the reboot it didnt return at all.
I left it charging the battery It only had a white led blinking on the speaker.
When i plug the phone to the computer it detects it as a Qualcomm 9008 device.
Ive tried to flash it with QFIL but I cant find the files required to do the flashing, because it seems the only way.
Ive tried the Blank flash but it doesnt work at all.
This is the log of the blankflash
**** Log buffer [000001] 2017-08-22_19:25:41 ****
[ -0.000] Opening device: \\.\COM4
[ 0.004] Detecting device
[ 0.006] ...cpu.id = 70 (0x46)
[ 0.007] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.007] Opening singleimage
[ 0.007] Loading package
[ 0.011] ...filename = singleimage.pkg.xml
[ 0.013] Loading programmer
[ 0.014] ...filename = programmer.mbn
[ 0.014] Sending programmer
[ 0.226] Handling things over to programmer
[ 0.227] Identifying CPU version
[ 0.229] Waiting for firehose to get ready
[ 60.893] Waiting for firehose to get ready
[121.118] ...MSM8953 unknown
[121.119] Determining target secure state
[121.130] Waiting for firehose to get ready
[181.360] ...secure = no
[181.398] Waiting for firehose to get ready
[241.629] Configuring device...
[241.631] Waiting for firehose to get ready
[301.868] Waiting for firehose to get ready
[362.081] Waiting for firehose to get ready
[422.324] Waiting for firehose to get ready
[482.702] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[482.704] Check qboot_log.txt for more details
[482.704] Total time: 482.706s
[482.704]
[482.704] qboot version 3.40
[482.704]
[482.704] DEVICE {
[482.704] name = "\\.\COM4",
[482.704] flags = "0x64",
[482.704] addr = "0x61FE5C",
[482.704] sahara.current_mode = "0",
[482.704] api.buffer = "0x1075020",
[482.704] cpu.serial = "3030183929",
[482.704] cpu.id = "70",
[482.704] cpu.sv_sbl = "0",
[482.704] cpu.name = "MSM8953",
[482.704] storage.type = "eMMC",
[482.704] sahara.programmer = "programmer.mbn",
[482.704] module.firehose = "0x6CEAE8",
[482.704] cpu.ver = "0",
[482.704] cpu.vername = "unknown",
[482.704] api.bnr = "0xFB82C0",
[482.704] }
[482.704]
[482.708]
[482.708] Backup & Restore {
[482.708] num_entries = 0,
[482.708] restoring = "false",
[482.708] backup_error = "not started",
[482.708] restore_error = "not started",
[482.708] }
[482.708]
**** Log buffer [000001] 2017-08-22_19:38:52 ****
[ 0.000] Opening device: \\.\COM4
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 70 (0x46)
[ 0.005] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.005] Opening singleimage
[ 0.006] Loading package
[ 0.009] ...filename = singleimage.pkg.xml
[ 0.011] Loading programmer
[ 0.011] ...filename = programmer.mbn
[ 0.011] Sending programmer
[ 0.225] Handling things over to programmer
[ 0.225] Identifying CPU version
[ 0.228] Waiting for firehose to get ready
[ 61.088] Waiting for firehose to get ready
[121.605] ...MSM8953 unknown
[121.605] Determining target secure state
[121.605] Waiting for firehose to get ready
[182.135] ...secure = no
[182.150] Waiting for firehose to get ready
[242.688] Configuring device...
[242.688] Waiting for firehose to get ready
[303.229] Waiting for firehose to get ready
[363.774] Waiting for firehose to get ready
[424.255] Waiting for firehose to get ready
[484.808] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[484.808] Check qboot_log.txt for more details
[484.808] Total time: 484.809s
[484.808]
[484.808] qboot version 3.40
[484.808]
[484.808] DEVICE {
[484.808] name = "\\.\COM4",
[484.808] flags = "0x64",
[484.808] addr = "0x61FE5C",
[484.808] sahara.current_mode = "0",
[484.808] api.buffer = "0x10A0020",
[484.808] cpu.serial = "3030183929",
[484.808] cpu.id = "70",
[484.808] cpu.sv_sbl = "0",
[484.808] cpu.name = "MSM8953",
[484.808] storage.type = "eMMC",
[484.808] sahara.programmer = "programmer.mbn",
[484.808] module.firehose = "0xB5EA48",
[484.808] cpu.ver = "0",
[484.808] cpu.vername = "unknown",
[484.808] api.bnr = "0xA47B18",
[484.808] }
[484.808]
[484.808]
[484.808] Backup & Restore {
[484.808] num_entries = 0,
[484.808] restoring = "false",
[484.808] backup_error = "not started",
[484.808] restore_error = "not started",
[484.808] }
[484.808]
**** Log buffer [000001] 2017-08-23_07:44:39 ****
[ -0.000] Opening device: \\.\COM5
[ 0.004] Detecting device
[ 0.007] ...cpu.id = 70 (0x46)
[ 0.007] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.008] Opening singleimage
[ 0.050] Loading package
[ 0.053] ...filename = singleimage.pkg.xml
[ 0.055] Loading programmer
[ 0.055] ...filename = programmer.mbn
[ 0.055] Sending programmer
[ 0.269] Handling things over to programmer
[ 0.270] Identifying CPU version
[ 0.272] Waiting for firehose to get ready
[ 35.189] ReadFile() failed, GetLastError()=0
[ 62.427] Waiting for firehose to get ready
[122.878] ...MSM8953 unknown
[122.878] Determining target secure state
[122.878] Waiting for firehose to get ready
[183.388] ...secure = no
[183.404] Waiting for firehose to get ready
[243.861] Configuring device...
[243.861] Waiting for firehose to get ready
[304.339] Waiting for firehose to get ready
[364.778] Waiting for firehose to get ready
[425.283] Waiting for firehose to get ready
[485.708] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[485.708] Check qboot_log.txt for more details
[485.708] Total time: 485.710s
[485.708]
[485.708] qboot version 3.40
[485.708]
[485.708] DEVICE {
[485.708] name = "\\.\COM5",
[485.708] flags = "0x64",
[485.708] addr = "0x61FE5C",
[485.708] sahara.current_mode = "0",
[485.708] api.buffer = "0x1254020",
[485.708] cpu.serial = "3030183929",
[485.708] cpu.id = "70",
[485.708] cpu.sv_sbl = "0",
[485.708] cpu.name = "MSM8953",
[485.708] storage.type = "eMMC",
[485.708] sahara.programmer = "programmer.mbn",
[485.708] module.firehose = "0xE0EA48",
[485.708] cpu.ver = "0",
[485.708] cpu.vername = "unknown",
[485.708] api.bnr = "0x1197AB8",
[485.708] }
[485.708]
[485.708]
[485.708] Backup & Restore {
[485.708] num_entries = 0,
[485.708] restoring = "false",
[485.708] backup_error = "not started",
[485.708] restore_error = "not started",
[485.708] }
[485.708]
Can some one help me?
EDIT
I have another Moto G5 Plus (i brought it because i need the phone to work) I was thinking if there is a way to clone the firmware or something?
Pedrustr2085xo said:
Hello! I got the .6X update and installed it in my Moto G5 PLus, after the reboot it didnt return at all.
I left it charging the battery It only had a white led blinking on the speaker.
When i plug the phone to the computer it detects it as a Qualcomm 9008 device.
Ive tried to flash it with QFIL but I cant find the files required to do the flashing, because it seems the only way.
Ive tried the Blank flash but it doesnt work at all.
This is the log of the blankflash
**** Log buffer [000001] 2017-08-22_19:25:41 ****
[ -0.000] Opening device: \\.\COM4
[ 0.004] Detecting device
[ 0.006] ...cpu.id = 70 (0x46)
[ 0.007] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.007] Opening singleimage
[ 0.007] Loading package
[ 0.011] ...filename = singleimage.pkg.xml
[ 0.013] Loading programmer
[ 0.014] ...filename = programmer.mbn
[ 0.014] Sending programmer
[ 0.226] Handling things over to programmer
[ 0.227] Identifying CPU version
[ 0.229] Waiting for firehose to get ready
[ 60.893] Waiting for firehose to get ready
[121.118] ...MSM8953 unknown
[121.119] Determining target secure state
[121.130] Waiting for firehose to get ready
[181.360] ...secure = no
[181.398] Waiting for firehose to get ready
[241.629] Configuring device...
[241.631] Waiting for firehose to get ready
[301.868] Waiting for firehose to get ready
[362.081] Waiting for firehose to get ready
[422.324] Waiting for firehose to get ready
[482.702] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[482.704] Check qboot_log.txt for more details
[482.704] Total time: 482.706s
[482.704]
[482.704] qboot version 3.40
[482.704]
[482.704] DEVICE {
[482.704] name = "\\.\COM4",
[482.704] flags = "0x64",
[482.704] addr = "0x61FE5C",
[482.704] sahara.current_mode = "0",
[482.704] api.buffer = "0x1075020",
[482.704] cpu.serial = "3030183929",
[482.704] cpu.id = "70",
[482.704] cpu.sv_sbl = "0",
[482.704] cpu.name = "MSM8953",
[482.704] storage.type = "eMMC",
[482.704] sahara.programmer = "programmer.mbn",
[482.704] module.firehose = "0x6CEAE8",
[482.704] cpu.ver = "0",
[482.704] cpu.vername = "unknown",
[482.704] api.bnr = "0xFB82C0",
[482.704] }
[482.704]
[482.708]
[482.708] Backup & Restore {
[482.708] num_entries = 0,
[482.708] restoring = "false",
[482.708] backup_error = "not started",
[482.708] restore_error = "not started",
[482.708] }
[482.708]
**** Log buffer [000001] 2017-08-22_19:38:52 ****
[ 0.000] Opening device: \\.\COM4
[ 0.002] Detecting device
[ 0.005] ...cpu.id = 70 (0x46)
[ 0.005] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.005] Opening singleimage
[ 0.006] Loading package
[ 0.009] ...filename = singleimage.pkg.xml
[ 0.011] Loading programmer
[ 0.011] ...filename = programmer.mbn
[ 0.011] Sending programmer
[ 0.225] Handling things over to programmer
[ 0.225] Identifying CPU version
[ 0.228] Waiting for firehose to get ready
[ 61.088] Waiting for firehose to get ready
[121.605] ...MSM8953 unknown
[121.605] Determining target secure state
[121.605] Waiting for firehose to get ready
[182.135] ...secure = no
[182.150] Waiting for firehose to get ready
[242.688] Configuring device...
[242.688] Waiting for firehose to get ready
[303.229] Waiting for firehose to get ready
[363.774] Waiting for firehose to get ready
[424.255] Waiting for firehose to get ready
[484.808] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[484.808] Check qboot_log.txt for more details
[484.808] Total time: 484.809s
[484.808]
[484.808] qboot version 3.40
[484.808]
[484.808] DEVICE {
[484.808] name = "\\.\COM4",
[484.808] flags = "0x64",
[484.808] addr = "0x61FE5C",
[484.808] sahara.current_mode = "0",
[484.808] api.buffer = "0x10A0020",
[484.808] cpu.serial = "3030183929",
[484.808] cpu.id = "70",
[484.808] cpu.sv_sbl = "0",
[484.808] cpu.name = "MSM8953",
[484.808] storage.type = "eMMC",
[484.808] sahara.programmer = "programmer.mbn",
[484.808] module.firehose = "0xB5EA48",
[484.808] cpu.ver = "0",
[484.808] cpu.vername = "unknown",
[484.808] api.bnr = "0xA47B18",
[484.808] }
[484.808]
[484.808]
[484.808] Backup & Restore {
[484.808] num_entries = 0,
[484.808] restoring = "false",
[484.808] backup_error = "not started",
[484.808] restore_error = "not started",
[484.808] }
[484.808]
**** Log buffer [000001] 2017-08-23_07:44:39 ****
[ -0.000] Opening device: \\.\COM5
[ 0.004] Detecting device
[ 0.007] ...cpu.id = 70 (0x46)
[ 0.007] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.008] Opening singleimage
[ 0.050] Loading package
[ 0.053] ...filename = singleimage.pkg.xml
[ 0.055] Loading programmer
[ 0.055] ...filename = programmer.mbn
[ 0.055] Sending programmer
[ 0.269] Handling things over to programmer
[ 0.270] Identifying CPU version
[ 0.272] Waiting for firehose to get ready
[ 35.189] ReadFile() failed, GetLastError()=0
[ 62.427] Waiting for firehose to get ready
[122.878] ...MSM8953 unknown
[122.878] Determining target secure state
[122.878] Waiting for firehose to get ready
[183.388] ...secure = no
[183.404] Waiting for firehose to get ready
[243.861] Configuring device...
[243.861] Waiting for firehose to get ready
[304.339] Waiting for firehose to get ready
[364.778] Waiting for firehose to get ready
[425.283] Waiting for firehose to get ready
[485.708] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[485.708] Check qboot_log.txt for more details
[485.708] Total time: 485.710s
[485.708]
[485.708] qboot version 3.40
[485.708]
[485.708] DEVICE {
[485.708] name = "\\.\COM5",
[485.708] flags = "0x64",
[485.708] addr = "0x61FE5C",
[485.708] sahara.current_mode = "0",
[485.708] api.buffer = "0x1254020",
[485.708] cpu.serial = "3030183929",
[485.708] cpu.id = "70",
[485.708] cpu.sv_sbl = "0",
[485.708] cpu.name = "MSM8953",
[485.708] storage.type = "eMMC",
[485.708] sahara.programmer = "programmer.mbn",
[485.708] module.firehose = "0xE0EA48",
[485.708] cpu.ver = "0",
[485.708] cpu.vername = "unknown",
[485.708] api.bnr = "0x1197AB8",
[485.708] }
[485.708]
[485.708]
[485.708] Backup & Restore {
[485.708] num_entries = 0,
[485.708] restoring = "false",
[485.708] backup_error = "not started",
[485.708] restore_error = "not started",
[485.708] }
[485.708]
Can some one help me?
EDIT
I have another Moto G5 Plus (i brought it because i need the phone to work) I was thinking if there is a way to clone the firmware or something?
Click to expand...
Click to collapse
SAME PROBLEM Anyone HELP me PLEASE
Try this: https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
but with the G5+ blankflash.zip from user vache
I found also this:
https://forum.xda-developers.com/showpost.php?p=71405834&postcount=23
And this is marked as SOLVED, so it should work:
https://forum.xda-developers.com/showpost.php?p=73062532
Anyone help me with this thread https://forum.xda-developers.com/g5-plus/how-to/help-moto-g5-plus-hard-bricked-solved-t3662734
BubuXP said:
Try this: https://forum.xda-developers.com/moto-g4-plus/help/solved-unbrick-hard-bricked-dead-t3585016
but with the G5+ blankflash.zip from user vache
I found also this:
https://forum.xda-developers.com/showpost.php?p=71405834&postcount=23
And this is marked as SOLVED, so it should work:
https://forum.xda-developers.com/showpost.php?p=73062532
Click to expand...
Click to collapse
I tried to follow the solver one... But I always get stuck in the blankflash with this:
X:\Users\pedro\Downloads\motoGbrick\blankflash>.\qboot.exe blank-flash
< waiting for device >
Motorola qboot utility version 3.40
[ 0.000] Opening device: \\.\COM3
[ 0.001] Detecting device
[ 0.004] ...cpu.id = 70 (0x46)
[ 0.004] ...cpu.sn = 3030183929 (0xb49ceff9)
[ 0.005] Opening singleimage
[ 0.005] Loading package
[ 0.008] ...filename = singleimage.pkg.xml
[ 0.009] Loading programmer
[ 0.009] ...filename = programmer.mbn
[ 0.009] Sending programmer
[ 0.223] Handling things over to programmer
[ 0.224] Identifying CPU version
[ 0.225] Waiting for firehose to get ready
[ 60.925] Waiting for firehose to get ready
[121.472] ...MSM8953 unknown
[121.472] Determining target secure state
[121.472] Waiting for firehose to get ready
[181.849] ...secure = no
[181.880] Waiting for firehose to get ready
[242.349] Configuring device...
[242.349] Waiting for firehose to get ready
[302.824] Waiting for firehose to get ready
[363.253] Waiting for firehose to get ready
[423.554] Waiting for firehose to get ready
[483.970] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[483.970] Check qboot_log.txt for more details
[483.970] Total time: 483.970s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
X:\Users\pedro\Downloads\motoGbrick\blankflash>pause
Presione una tecla para continuar . . .
It worked I used Albus blankflash...
Pedrustr2085xo said:
It worked I used Albus blankflash...
Click to expand...
Click to collapse
can you help me how you did it?????? please help
suvadipbera12345 said:
can you help me how you did it?????? please help
Click to expand...
Click to collapse
Well.. There isn't much to do about it... you have to put the Deoxed ROM in the SD card.
Then you blankflash the device just as instructed:
Connect the phone to the computer (sound of device connected)
Push vol- and Power (sound of device being disconnected)
In that moment you run the Albus blank flash (Sound of device connected)
You let the script run and should boot up in bootloader mode.
Once in booloader mode, use ADB and reboot on recovery mode, then flash TWRP for G5+
After that, reboot again in recovery, it should reboot on TWRP (it might take a few minutes the first time.... don't know why)
Flash the deoxed rom.
Done!
Troubleshoot (at least this is the only problem i found):
If the phone on reboot goes back to TWRP, use the Reboot on Bootloader function, then in the bootloader function select: START
Some Notes:
The phone will be detected as a Moto Z2
You CAN NOT go back to stock, until we get the official OREO (android 8) ROM. So we are stuck with custom ROMS until said moment.
You CAN NOT OTA update, because you are on custom recovery. Don't even try it.
Thanks it worked
Pedrustr2085xo said:
Well.. There isn't much to do about it... you have to put the Deoxed ROM in the SD card.
Then you blankflash the device just as instructed:
Connect the phone to the computer (sound of device connected)
Push vol- and Power (sound of device being disconnected)
In that moment you run the Albus blank flash (Sound of device connected)
You let the script run and should boot up in bootloader mode.
Once in booloader mode, use ADB and reboot on recovery mode, then flash TWRP for G5+
After that, reboot again in recovery, it should reboot on TWRP (it might take a few minutes the first time.... don't know why)
Flash the deoxed rom.
Done!
Troubleshoot (at least this is the only problem i found):
If the phone on reboot goes back to TWRP, use the Reboot on Bootloader function, then in the bootloader function select: START
Some Notes:
The phone will be detected as a Moto Z2
You CAN NOT go back to stock, until we get the official OREO (android 8) ROM. So we are stuck with custom ROMS until said moment.
You CAN NOT OTA update, because you are on custom recovery. Don't even try it.
Click to expand...
Click to collapse
Can u please provide link for deoxed ROM??? pleaseeeeeeeeeeee......
Can you please provide blank flash for moto XT1676 G5 only tested with new bootloader 2018 march security please?
Pedrustr2085xo said:
Some Notes:
The phone will be detected as a Moto Z2
You CAN NOT go back to stock, until we get the official OREO (android 8) ROM. So we are stuck with custom ROMS until said moment.
You CAN NOT OTA update, because you are on custom recovery. Don't even try it.
Click to expand...
Click to collapse
If you are RETUS XT1687 I have a twrp backup of 93-8 if you would like it let me know.
I can walk you through getting ready to do the restore if you need to. (advised)
---------- Post added at 12:37 PM ---------- Previous post was at 12:34 PM ----------
praveen Glaxi said:
Can u please provide link for deoxed ROM??? pleaseeeeeeeeeeee......
Click to expand...
Click to collapse
https://forum.xda-developers.com/g5-plus/development/rom-twrp-flashable-stock-builds-t3675616 93-4 is in there.
A little search never hurt nobody
orvon.freeman said:
If you are RETUS XT1687 I have a twrp backup of 93-8 if you would like it let me know.
I can walk you through getting ready to do the restore if you need to. (advised)
---------- Post added at 12:37 PM ---------- Previous post was at 12:34 PM ----------
https://forum.xda-developers.com/g5-plus/development/rom-twrp-flashable-stock-builds-t3675616 93-4 is in there.
A little search never hurt nobody
Click to expand...
Click to collapse
can you give me a backup copy of the persist file, do you have a baseband
cubermax said:
can you give me a backup copy of the persist file, do you have a baseband
Click to expand...
Click to collapse
I can give you link to whole thing
orvon.freeman said:
I can give you link to whole thing
Click to expand...
Click to collapse
Give me please
cubermax said:
Give me please
Click to expand...
Click to collapse
here you go sorry been super busy
https://drive.google.com/open?id=17Jvfwi9SqmA4UujHJMMelhQTRrs6XNri
Moto g5 cedric xt1676 blankflash needed
Moto g5 cedric xt1676 blankflash needed
FARUK BD said:
Moto g5 cedric xt1676 blankflash needed
Click to expand...
Click to collapse
this is the G5 plus (Potter) forum, please ask for it HERE
cant access vache-android.com
guys please i need help to access the vache-android.com page ive tried everything yet nothing works. Or if any one has a mirror link to albus blankflash.
I have the same issue and none of the fixes above worked, please help me!

[TIMELINE] Trying with ARYKTECH unbrick my MXP

Hi, I post the updates of the contact with ARYKTECH https://web.telegram.org/#/[email protected]
I buy in http://www.aryk.tech/2017/11/moto-x-play-unbrick-solutions.html the blankflash file for bricked MXP when downgrade of Nougat Stable to MM and install the OTA of 2017/01.
2017/11/02:
I pay 10 USD with paypal and wait...
2017/11/03
I receive the files hours later in google drive:
https://forum.xda-developers.com/attachment.php?attachmentid=4323100&stc=1&d=1509823657
Information of the folders:
https://dl.xda-developers.com/4/3/2....png?key=lb74mdfB79Bje9bOnMbqjA&ts=1509823783
https://dl.xda-developers.com/4/3/2....png?key=gKWllZVzD1gzMKR5DoHOoA&ts=1509823783
The version send me is the same like the soaktest:
lux_retasia_ds_userdebug_7.1.1_NPD26.35_eng.praseed.170526.190746_intcfg_test-keys_retasiaall_03
When I execute the blank-flash.bat of the folders have a error.
C:\mxp blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.003s]
greeting device for command mode
OKAY [ 0.001s]
identifying device
...serial = 0x15C3716
...chip-id = 0x90B (MSM8939)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
FAILED (blank-flash:sahara-transfer-image:send-image:error reading packet)
C:\mxp blankflash\blankflash>pause
Presione una tecla para continuar . . .
----
C:\mxp blankflash\Err_blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ 0.002s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x15C3716
...chip-id = 0x90B (MSM8939)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.004s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.003s]
switching to download mode
OKAY [ 0.000s]
greeting device for image downloading
OKAY [ 0.001s]
sending programmer
OKAY [ 0.047s]
flashing singleimage
...protocol = sdl
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
C:\mxp blankflash\Err_blankflash>pause
2017/11/04:
Right now i wait a new version.... who promised me to send.
As I guessed they began with bull****, assuming naive you have old security there )
I think they got nothing. Motorola leak strikes like a miracle, but not SO often.
Let us know if any of their methods work!
2017/11/05 send the version 3 of blankflash:
ERROR
**** Log buffer [000001] 2017-11-05_14:40:23 ****
[ -0.000] Opening device: \\.\COM8
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 2315 (0x90b)
[ -0.000] ...cpu.sn = 60355909 (0x398f545)
[ -0.000] Opening singleimage
[ -0.000] ERROR: error opening singleimage
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: 0.016s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM8",
[ -0.000] flags = "0x64",
[ -0.000] addr = "0x22FE6C",
[ -0.000] sahara.current_mode = "3",
[ -0.000] api.buffer = "0x1A00020",
[ -0.000] cpu.serial = "60355909",
[ -0.000] cpu.id = "2315",
[ -0.000] cpu.sv_sbl = "0",
[ -0.000] api.bnr = "0x612FE8",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
Blankflash files I asks for version 3 instead of 4
soyguris said:
2017/11/05 send the version 3 of blankflash:
ERROR
**** Log buffer [000001] 2017-11-05_14:40:23 ****
[ -0.000] Opening device: \\.\COM8
[ -0.000] Detecting device
[ -0.000] ...cpu.id = 2315 (0x90b)
[ -0.000] ...cpu.sn = 60355909 (0x398f545)
[ -0.000] Opening singleimage
[ -0.000] ERROR: error opening singleimage
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: 0.016s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM8",
[ -0.000] flags = "0x64",
[ -0.000] addr = "0x22FE6C",
[ -0.000] sahara.current_mode = "3",
[ -0.000] api.buffer = "0x1A00020",
[ -0.000] cpu.serial = "60355909",
[ -0.000] cpu.id = "2315",
[ -0.000] cpu.sv_sbl = "0",
[ -0.000] api.bnr = "0x612FE8",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
Click to expand...
Click to collapse
I tried to flash blank flash files from Moto G4 Plus forum and it says, expected version 3 instead of 4 and it quit. I believe you have version 3 blank flash files. Waiting for you to successfully unbrick your Moto X Play, so that I can also get the same files and try to unbrik my MXP, fingers crossed!
2017/11/07: I escalated the case to Paypal and gave me back the money.
Only Motorola have the solution.
Can I test version 3 file on my MXP?
soyguris said:
2017/11/07: I escalated the case to Paypal and gave me back the money.
Only Motorola have the solution.
Click to expand...
Click to collapse
Could you please share the version 3 Blank Flash Files and let me test it on my MXP?
Lord of Hell said:
Could you please share the version 3 Blank Flash Files and let me test it on my MXP?
Click to expand...
Click to collapse
The files attached.
None of them works
done!
it works!??
I tested on my moto x play xt1563 and gave the same errors It did not work.
Sorry for english, i'm using google translate
Not working is a scam
Enviado desde mi XT1563 mediante Tapatalk

Help. my phone is dead ...

Hello, good afternoon (Chilean time), in Latin American forums there is little information about broken cell phones.
Putting my hand in my motorola xt1621 will change all your firmwares values ​​starter manager, etc., (values ​​that I no longer remember) my cell phone to update to 7.0 if not bad memory and no longer set more.
Only has a black LED white light and when connecting to my PC it is not recognized 'Qualcomm' 'read from here it took me to start my PC a failure test, I detect drivers by the port name: Qualcomm HS-USB QDLoader 9008 (COM4), when using '' blank-flahs '' it leaves me the following log
**** Log buffer [000001] 2017-04-05_01:43:26 ****
[ 0.000] Opening device: \\.\COM5
[180.071] Detecting device
[543.084] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[543.084] Check qboot_log.txt for more details
[543.084] Total time: 543.084s
[543.084]
[543.084] qboot version 3.40
[543.084]
[543.084] DEVICE {
[543.084] name = "\\.\COM5",
[543.084] flags = "0x64",
[543.084] addr = "0x28FE6C",
[543.084] api.bnr = "0x5A2DE8",
[543.084] }
[543.084]
[543.084]
[543.084] Backup & Restore {
[543.084] num_entries = 0,
[543.084] restoring = "false",
[543.084] backup_error = "not started",
[543.084] restore_error = "not started",
[543.084] }
[543.084]
**** Log buffer [000001] 2017-04-05_01:53:47 ****
[ -0.000] Opening device: \\.\COM5
[130.744] ERROR: device_open()->error opening device
[130.744] Check qboot_log.txt for more details
[130.744] Total time: 130.744s
[130.744]
[130.744] qboot version 3.40
[130.744]
[130.744] DEVICE {
[130.744] name = "\\.\COM5",
[130.744] flags = "0x60",
[130.744] addr = "0x28FE6C",
[130.744] api.bnr = "0x762DE8",
[130.744] }
[130.744]
[130.744]
[130.744] Backup & Restore {
[130.744] num_entries = 0,
[130.744] restoring = "false",
[130.744] backup_error = "not started",
[130.744] restore_error = "not started",
[130.744] }
[130.744]
**** Log buffer [000001] 2017-04-05_02:16:13 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x542DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:18:42 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:18:59 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5C2E08",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:19:13 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0xe4",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5E2E08",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-05_02:28:27 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM5",
[ 0.000] flags = "0x40",
[ 0.000] addr = "0x28FE6C",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2017-04-05_02:38:02 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM5",
[ 0.000] flags = "0x40",
[ 0.000] addr = "0x28FE6C",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2017-04-05_02:38:16 ****
[ -0.000] Opening device: \\.\COM5
[180.368] Detecting device
[543.380] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[543.380] Check qboot_log.txt for more details
[543.380] Total time: 543.396s
[543.380]
[543.380] qboot version 3.40
[543.380]
[543.380] DEVICE {
[543.380] name = "\\.\COM5",
[543.380] flags = "0x44",
[543.380] addr = "0x28FE6C",
[543.380] }
[543.380]
**** Log buffer [000001] 2017-04-05_02:58:06 ****
[ -0.000] Opening device: \\.\COM5
[180.212] Detecting device
[543.240] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[543.240] Check qboot_log.txt for more details
[543.240] Total time: 543.240s
[543.240]
[543.240] qboot version 3.40
[543.240]
[543.240] DEVICE {
[543.240] name = "\\.\COM5",
[543.240] flags = "0x44",
[543.240] addr = "0x28FE6C",
[543.240] }
[543.240]
**** Log buffer [000001] 2017-04-05_09:27:09 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.016s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM5",
[ 0.000] flags = "0x40",
[ 0.000] addr = "0x28FE6C",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2017-04-05_09:27:17 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.044] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.044] Check qboot_log.txt for more details
[ 4.044] Total time: 4.044s
[ 4.045]
[ 4.045] qboot version 3.40
[ 4.045]
[ 4.045] DEVICE {
[ 4.045] name = "\\.\COM5",
[ 4.045] flags = "0x44",
[ 4.045] addr = "0x28FE6C",
[ 4.045] }
[ 4.045]
**** Log buffer [000001] 2017-04-06_00:06:39 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:06:49 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:05 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x44",
[ 4.072] addr = "0x28FE6C",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:32 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0xA72DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:52 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.087s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x952DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:07:57 ****
[ 0.000] Opening device: \\.\COM5
[ 0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x2D2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:02 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5F2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2017-04-06_00:08:07 ****
[ -0.000] Opening device: \\.\COM5
[ -0.000] Detecting device
[ 4.072] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.072] Check qboot_log.txt for more details
[ 4.072] Total time: 4.072s
[ 4.072]
[ 4.072] qboot version 3.40
[ 4.072]
[ 4.072] DEVICE {
[ 4.072] name = "\\.\COM5",
[ 4.072] flags = "0x64",
[ 4.072] addr = "0x28FE6C",
[ 4.072] api.bnr = "0x5A2DE8",
[ 4.072] }
[ 4.072]
[ 4.072]
[ 4.072] Backup & Restore {
[ 4.072] num_entries = 0,
[ 4.072] restoring = "false",
[ 4.072] backup_error = "not started",
[ 4.072] restore_error = "not started",
[ 4.072] }
[ 4.072]
**** Log buffer [000001] 2018-05-27_19:15:58 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.109s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x2C2888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:17:39 ****
[ -0.000] Opening device: \\.\COM4
[ 0.001] ERROR: device_open()->error opening device
[ 0.002] Check qboot_log.txt for more details
[ 0.009] Total time: 0.010s
[ 0.009]
[ 0.009] qboot version 3.40
[ 0.009]
[ 0.009] DEVICE {
[ 0.010] name = "\\.\COM4",
[ 0.010] flags = "0x60",
[ 0.010] addr = "0x28FE6C",
[ 0.010] api.bnr = "0x8D2888",
[ 0.010] }
[ 0.010]
[ 0.010]
[ 0.010] Backup & Restore {
[ 0.010] num_entries = 0,
[ 0.010] restoring = "false",
[ 0.010] backup_error = "not started",
[ 0.010] restore_error = "not started",
[ 0.010] }
[ 0.010]
**** Log buffer [000001] 2018-05-27_19:18:32 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x662888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:18:36 ****
[ -0.000] Opening device: \\.\COM4
[ -0.000] ERROR: device_open()->error opening device
[ -0.000] Check qboot_log.txt for more details
[ -0.000] Total time: -0.000s
[ -0.000]
[ -0.000] qboot version 3.40
[ -0.000]
[ -0.000] DEVICE {
[ -0.000] name = "\\.\COM4",
[ -0.000] flags = "0x60",
[ -0.000] addr = "0x28FE6C",
[ -0.000] api.bnr = "0xA52888",
[ -0.000] }
[ -0.000]
[ -0.000]
[ -0.000] Backup & Restore {
[ -0.000] num_entries = 0,
[ -0.000] restoring = "false",
[ -0.000] backup_error = "not started",
[ -0.000] restore_error = "not started",
[ -0.000] }
[ -0.000]
**** Log buffer [000001] 2018-05-27_19:20:09 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x482888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:20:18 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x512888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
**** Log buffer [000001] 2018-05-27_19:20:20 ****
[ 0.000] Opening device: \\.\COM4
[ 0.000] ERROR: device_open()->error opening device
[ 0.000] Check qboot_log.txt for more details
[ 0.000] Total time: 0.000s
[ 0.000]
[ 0.000] qboot version 3.40
[ 0.000]
[ 0.000] DEVICE {
[ 0.000] name = "\\.\COM4",
[ 0.000] flags = "0x60",
[ 0.000] addr = "0x28FE6C",
[ 0.000] api.bnr = "0x5A2888",
[ 0.000] }
[ 0.000]
[ 0.000]
[ 0.000] Backup & Restore {
[ 0.000] num_entries = 0,
[ 0.000] restoring = "false",
[ 0.000] backup_error = "not started",
[ 0.000] restore_error = "not started",
[ 0.000] }
[ 0.000]
Click to expand...
Click to collapse
I can not do, see or install anything.
Click to expand...
Click to collapse
What blankflash are you using? Is it the blankflash from this guide here: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Also, verify you are using the original USB cable or a high quality USB data cable for connecting your device, and that you have the Motorola USB drivers installed on your computer: https://support.motorola.com/us/en/drivers You may also wish to disable driver signature enforcement if you are running Windows 10 or 8.1 https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Sounds like you downgraded your stock firmware by flashing an older firmware and then proceeded to have your bootloader corrupted by an old OTA update. If you do get your device working, please only flash the newest firmware we have available/for your device, or if you do flash old stock firmware, please do not use OTA updates. I'm not sure what firmware is the latest for retla/Chile devices, but have a look at this thread for the April 2018 firmware (again, it's up to you to verify if this is the firmware you need) https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138

Unbrick Moto g7 with February securitypatch [solved]

If you has bricked your Moto g7 you must join this group https://t.me/MotoG7RiverDiscussion There you will find a new blankflash file, that's working with last motorola's february update.
Enjoy it, wash your hands and take care of yourself!
I need Help
Motorola qboot utility version 3.40
[ -0.000] Opening device: \\.\COM5
[ 0.001] Detecting device
[ 4.008] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.008] Check qboot_log.txt for more details
[ 4.010] Total time: 4.013s
FAILED: qb_flash_singleimage()->sahara_greet_device()->change_mode()->do_hello()->IO error
**** Log buffer [000001] 2020-04-02_12:00:32 ****
[ -0.000] Opening device: \\.\COM5
[ 0.001] Detecting device
[ 4.007] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 4.007] Check qboot_log.txt for more details
[ 4.007] Total time: 4.009s
[ 4.007]
[ 4.007] qboot version 3.40
[ 4.007]
[ 4.007] DEVICE {
[ 4.007] name = "\\.\COM5",
[ 4.007] flags = "0x64",
[ 4.007] addr = "0x61FE4C",
[ 4.007] api.bnr = "0x8B2D20",
[ 4.007] }
[ 4.007]
[ 4.007]
[ 4.007] Backup & Restore {
[ 4.007] num_entries = 0,
[ 4.007] restoring = "false",
[ 4.007] backup_error = "not started",
[ 4.007] restore_error = "not started",
[ 4.007] }
[ 4.007]
I already tried having one hand pressing less volume and power
I blankflashed my device and it worked, right now I don't know what else to do after that
Korax94 said:
I blankflashed my device and it worked, right now I don't know what else to do after that
Click to expand...
Click to collapse
You must install stock rom using fastboot mode. Chek instructions in this thread - https://forum.xda-developers.com/moto-g7/how-to/manually-update-g7-using-fastboot-t3917381
Could someone kindly describe how to unbrick Moto G7 XT1962-1 RETUS Factory unlocked model
Korax94 said:
I blankflashed my device and it worked, right now I don't know what else to do after that
Click to expand...
Click to collapse
Could you upload the blankflash you used?

Categories

Resources