Hello from France !
I have a problem on my civic type r fk2 ( 2016)with the Honda connect (no cd and no satnav)
I have done a factory reset and now nothing work and i have this message " unable to restore default settings"
I can only access to recovery settings when i reboot (power 10 second and after home button)and i can choose " Apply update from external storage ""wipe data "...
I don't know how to select when i go on a choice (with the + an - buttons) or how can i fix this
The honda dealers don't know!
Thanks for the reply ?
Related
I use the xda2unlock.
I have done it.
• You firstly need to put your xda II in the boot up mode Note: THIS WILL WIPE YOUR USER DATA SO ENSURE YOU HAVE BACKUP UP ALL YUR DATA ON YOUR PC.
• To enter the boot loader mode Hold the Power button and the Action button while pressing the stylus in the reset hole on the bottom.
• If you are in boot loader mode the screen will go gray and display serial at the top of the screen.
• Put the device in the USB cradle. The display will now say USB on the PDA and your pc will detect the PDA.
• Display USB in Active sync in 'File -> Connection Settings'
• Run the xda2unlock program.
• Type YES when requested by the unlock program and then press Enter on the PC keyboard.
When I type YES en my computer, this program return:
ERROR: OpenComport \\.\WCEUSBSH001 - Acceso denegado. :shock:
xa2 unlock
Try running the latest version of the unlock program no need to reset the xda or go into bootloader mode. It worked great on my xda 2
dont say thanks
Dont bother saying thank you for your help, will you?
Hi to all,
I open this topic to list and try to solve the problem that may occur during the utilisation of this device
I post the problem that i've found and the solution to solve them.
Of course if somebody have some problem or knows some solution please post it here
PROBLEM
I can't connect to any wifi network
SOLUTION
Search for SKTools and download it
Install it on you're device.
After some "first time" settings search the TCP/IP board (two times right)
In this board search "Wlan Support 802.11G" and select yes (by default it could be "NO")
Select "Done" and close SKTools
Reboot your device.
Now it should works
PROBLEM
My B7610 didn't connect to GPS signal
SOLUTION
1) Search and install GpsGate and Visual GpsCe
2) launch GpsGate
3) Choose "Start GpsGate after SoftReset" and "never ask me again"
4) Tap "Start"
5) In the next screen only choose "wired or Built in Gps"
6) Tap >
7) Wait while the programm search
8) In the screen that pop ups tap yes
9) in the next screen only choose "share with nmea applications"
10) Tap >
11) Confirm with "OK"
12) A screen with "Virtual Com Port 2 created", tap OK
13) The programm will close, restart it
14) A menu will appear, select "settings"
15) Go to the "advanced" board and select "show more options"
16) Select the "input" board
17) next to "com 7" tap "Close"
18) still in the "input" board, you will find "advanced", choose retry connection on timeout","close imput when idle" and "power off close"
19) Where we had put close (near Com7, see step 17) put open
20) In the advanced board select "Start GpsGate after soft reset"
21) Tap "OK" and close the programm
22) Reboot your device
23) The programm could ask to repeat the step 3 (but it's not sure)
24) Launch the program that requires the GPS (like car navigator)
25) choose and select "Bluetooth GPS Receiver" and set "Fransom Com Port 2" as gps port
26) Launch GpsCe and tap"agree"
27) In the board "connect" select "serial port(comm port) and then "Com 7" with "baud 4600"
28) If you want to make the fix faster enable "XTRA Download"
Now it should all works, the first time the fix will be a bit slow, don't panic and from the second time the fix will be very very fast
PROBLEM
I can't modify the sms skin
SOLUTION
First of all check if you have threadened sms sctivated.
To do this go in the registry key HKCU\Software\Microsoft\Inbox\Settings\OEM and change SMSINboxThreadingDisabled from 1 to 0.
Once done this, with a file Explorer like "total commander" open the Windows folder and search the iframe_style.css file and cut and copy to another location (for example the root of the microSD).
Rename it to iframe_style_white.css and put it again in Windows folder and overwrite it.
Restart your device.
Install the skin that you want
PROBLEM
I can't install android on my device
SOLUTION
See here
PROBLEMS NOT YET SOLVED
When I connect my device to the Tv i can't here no audio
I hope this thread will be useful for someone.
Sorry for my grammatical mistakes but i'm italian.
Hey guys, I found how to upgrade the HP 6945 in a brazilian website and I tried, IT WORKS! I'll explain how to do so now that I can post URLs
First of all, and which is a bit difficult nowadays, you need to use Windows XP, I saw cases that the people have done the upgrade in a virtual machine, but it didn't worked for me.
Let's go to the specifications of your mobile: your Flash Type MUST BE G4 and your BootLoader MUST BE G.39 , if you don't know you can see that in your mobile "Start/System/HP Asset Viewer"
Let's start,
1. Connect your mobile by ActiveSync (you'll need the 4.1 version as your mobile is WM5) using the cradle/dock/usb (was recommended to do a Hard Reset, but it's optional. To do so press On/Off , Send and Cancel Calls buttons, then use the PEN (Stylus) to press the Reset button under the mobile)
ActiveSync 4.1 - http://www.mediafire.com/?blql91lb1cqfq5z
2. Download and extract the file "SPL vG.39.7z" - http://www.mediafire.com/?o243pua8x7c0j0h
3. In the "SPL vG.39" folder, look for a shortcut named as "Command Prompt" and execute it
4. Now write this line in the command:
pdocwrite spl -n0 -b 0x20000 0 0x80000
5. You'll receive in your mobile a message about a dll (itsutils.dll) Press YES.
6. Now you have to put your mobile in BootLoader mode. Press the two buttons next to the directional + On/Off + Reset (using the Pen[Stylus])
7. Now open the ActiveSync and go to "connection configurations". Deselect the box "Allow USB Connections".
8. Download and extract the file "6915_ENG.7z" - http://www.mediafire.com/?kgwl83e22e2oody
9. Open the folder and execute "Sable_RUU.exe"
10. Press Upgrade and WAIT for a message "Update finished!"
11. Go back to ActiveSync (now you should use the 4.5 Version), go to "connection configurations" and select "Allow USB Connections"
12. Enjoy.
Everything is working, and you now have a new Office Package, including OneNote.
Your calls are better, don't freezing. The only problem is that SMS don't do any sounds when it arrives, but it's just the SMS.
The bluetooth you'll need to go to the Settings/Connections for the first time to work, but it's just once.
I have all the downloable content, if the link don't work, email me.
The original Rom of your iPAQ you can be found at HP's website named as GSM Radio Firmware, if you want, but I don't mind you'll need it.
The original website is in Brazilian-Portuguese, I've just translated for you.
http://www.gsmfans.com.br/index.php?topic=202365.0
That's everything. =)
Hi
I have bought a Zada (NaviTopia) dvd radio unit running Android 6.0.1 for my Hyundai Sonata 2009
https://www.aliexpress.com/item/6-2inch-Android-6-0-Octa-Core-2GB-RAM-32GB-ROM-Car-Radio-GPS-for-HYUNDAI/32800164682.html?spm=2114.13010608.0.0.3zGxhR
Does someone know where to download updates for this device ?
Can someone help me with the Factory setting password for this device ?
I have already tried " 126 " and " *#hct#root# " but with no luck
Many regards
MrNisse
try 3368 for factory settings
Hi
Now I have also tried " 1234 " + " 12341234 " + " 8888 " and " 3368 " still without any luck
Many regards
MrNisse
Hi
To information if any other should have the need of the Factory setting password for this type of dvd radio then it is " 121212 " :good:
If someone know where to download firmware for this dvd radio model, then I would very much like to know
Many regards
MrNisse
Hello friends, I need your help, I made a factory reset within menu 8888 and the problem is that no button on the equipment panel works for me, I try to configure them in the menu key study but they say it does not work, I can not turn off the device, or upload volume or any function with the buttons, could someone tell me what I do wrong? I have a video of the problem https://www.youtube.com/watch?v=iRgzuuXkKQE&t=24s .The only thing that works for me is the touch panel.
Cambus functions have also stopped working .Thanks for your help
Hi
i am not profi but i can help you .
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm=a2g0s.imconversation.0.0.14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm=a2g0s.imconversation.0.0.14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm=a2g0s.imconversation.0.0.14913e5fbGNit4